• wAP ac - RBwAPG-5HacD2HnD
• AC Outdoor Access Point
• 5Ghz 802.11a/n/ac
• 2.4Ghz 802.11b/g/n
• RouterOS L4
• 802.3at PoE fähig
• weißes Gehäuse

  Der MikroTik wAP ac wird als Outdoor Access Point eingesetzt. Der wAP ac ist ideal für Gärten oder sonstige Outdoormontagen geeignet.   Die Konfiguration der Einheit erfolgt per RouterOS. Router OS L4 bietet dem Nutzer unteranderem folgende Einstellungsmöglichkeiten:

• Unbeschränkte Anzahl an Interfaces
• RIP und OSFP
• Bis zu 200 PPPoE Tunnel
• Bis zu 200 aktive Hotspot Nutzer
• Bis zu 20 aktive Usermanager Sessions
• Bis zu 200 PPTP und L2TP Tunnel

  Outdoor Eigenschaften Der MikroTik wAP ac verfügt über ein kompaktes, wetterfestes und robustes Design. So garantiert die Komponente den optimalen Einsatz bei Temperaturen von -30°C bis zu +70°C.

• wAP ac Black Edition - RBwAPG-5HacD2HnD-BE
• AC Outdoor Access Point
• 5Ghz 802.11a/n/ac
• 2.4Ghz 802.11b/g/n
• RouterOS L4
• 802.3at PoE fähig
• weißes Gehäuse

  Der MikroTik wAP ac wird als Outdoor Access Point eingesetzt. Der wAP ac ist ideal für Gärten oder sonstige Outdoormontagen geeignet.   Die Konfiguration der Einheit erfolgt per RouterOS. Router OS L4 bietet dem Nutzer unteranderem folgende Einstellungsmöglichkeiten:

• Unbeschränkte Anzahl an Interfaces
• RIP und OSFP
• Bis zu 200 PPPoE Tunnel
• Bis zu 200 aktive Hotspot Nutzer
• Bis zu 20 aktive Usermanager Sessions
• Bis zu 200 PPTP und L2TP Tunnel

  Outdoor Eigenschaften Der MikroTik wAP ac verfügt über ein kompaktes, wetterfestes und robustes Design. So garantiert die Komponente den optimalen Einsatz bei Temperaturen von -30°C bis zu +70°C.

• 4x 10/100BASE-TX RJ45 LAN ports, auto-negotiation, auto MDI/MDI-X
• 1x 10/100BASE-TX RJ45 WAN port, auto-negotiation, auto MDI/MDI-X
• 1x 4G LTE 2.3 dBi antenna
• 2x 2.4G WiFi 2dBi antennas
• 1x GPS antenna
• 1x SIM card slot
• 1x console port
• 2x TF card slots  to save files for Wi-Fi advertising

Cellular Interface:

• Supports multi-band connectivity with FDD LTE/ TDD LTE/ WCDMA/ GSM/ LTE Cat4
• Built-in SIM and broadband backup for network redundancy
• One detachable antenna for 4G LTE connection
• LED indicators for connection status (3G/4G)

Wi-Fi Interfaces:

• Complies with IEEE 802.11b/g/n 2.4GHz
• Two detachable antennas for wireless connection
• 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES encryption),
• LED indicators for status 

Case and Installation:

• IP30 metal case
• Mounting brackets for vehicles
• Power requirement: 6~32V DC
• Supports 15KV DC Ethernet ESD protection
• -25 to 65 degrees C operating temperature 

Advanced Features:

• Supports demilitarized zone (DMZ).
• Supports VPN client, including GRE, PPTP, IPSec, L2TP 
• Supports NAT port mapping function, such as SNAT, DNAT
• Supports Static Routing to display current routing information of the gateway
• Supports QoS for bandwidth management
• Supports Dynamic DNS and PLANET DDNS
• Supports WAN connection types: DHCP client, static IP and PPPoE client
• Secures network connection
  
  • IP filter
  • URL filter
  • MAC filter 

Management:

• Gateway management interfaces
  
  • Console/Telnet Command Line interface 
  • Web  management
• Gateway Maintenance
  
  • Firmware upload via HTTP, TFTP
  • Restore or Reset button for reset to factory default
  • Dual images
• SNTP (Simple Network Time Protocol)
  System log
• System tool, such as ping and trace 
• Configuration backup and restore
• Supports CMS (Central Management System) and Wifidog for remote management and  Wi-Fi advertising

Internet of Vehicles via 4G LTE Cellular Gateway:
PLANET VCG-1500WG-LTE is a reliable, secure and high-bandwidth communications vehicle cellular gateway for demanding mobile applications and IoV (Internet of Vehicles) deployments. It features 4G LTE (Long Term Evolution), wireless AP, five Ethernet ports (4 LAN and 1 WAN), GPS,  VPN technology and bandwidth management bundled in a mountable metal case to establish a public network connection and allows passengers to access Internet. High-performance 4G LTE :
The VCG-1500WG-LTE is able to reach a download (DL) speed of up to 100Mbps and an upload (UL) speed of 50Mbps. The Cellular Gateway also supports multi-band connectivity including LTE FDD, TDD, HSDPA, WCDMA and GSM for a wide range of applications.  Wireless Access Point:
With an integrated 802.11n Wireless Access Point, the gateway supports data rate up to 300Mbps and is also compatible with 2.4GHz 802.11b/g/n equipment. The Wireless Protected Access (WPA-PSK/WPA2-PSK) and Wireless Encryption Protocol (WEP) features enhance the level of transmission security and access control over Wireless LAN.  GPS Included:
The VCG-1500WG-LTE is equipped with one convenient feature and that is GPS (global positioning system). It is a positioning system based on a network of satellites that continuously transmit necessary data. More signals transmitted from more satellites can triangulate its location on the ground, meaning any location can be easily tracked anytime.  Cost-effective VPN Solution:
The VCG-1500WG-LTE provides a complete data security and privacy feature for access and exchange of sensitive data. The full VPN capability of the VCG-1500WG-LTE including built-in PPTP, LT2P, and IPSec VPN client functions with DES/3DES/AES encryption and MD5/SHA-1 authentication makes the shared connection more secure and flexible. The IPSec VPN also makes the private tunnel over Internet more secure for enterprises doing business transactions. Dual TF Cards for Wi-Fi Advertising Contents:
The VCG-1500WG-LTE provides dual TF cards and the capacity of each card is up to 128GB. The TF cards can store thousands of advertising data and movie files. The administrator is able to upload these files to TF cards via FTP locally. Besides, through CMS (Central Management System), administrator is able to upload and maintain these files remotely. The device will display advertising contents when users access to the Wi-Fi after authentication.  Superior Management Functions:
For networking management features, the VCG-1500WG-LTE provides such functions as  DMZ, QoS and Wifidog, as well as full secure functions including Network Address Translation (NAT), IP/URL/MAC filtering. The VCG-1500WG-LTE has 4G and WAN connection failover characteristics, which can automatically switch over to the redundant, stable WAN connection to keep users always online without missing any fascinating moments. User-friendly and Secure Management:
For efficient management, the VCG-1500WG-LTE is equipped with console, web and Wifidog management interfaces. With the built-in web-based management interface, the VCG-1500WG-LTE offers an easy-to-use, platform independent management and configuration facility. The VCG-1500WG-LTE supports Wifidog and it can be managed via CMS (Central Management System) for remote management and Wi-Fi advertising. 

• Extends RS-232 transmission up to:
•  40 km with single-mode—TCF-90-S
•  5 km with multi-mode—TCF-90-M
• Reduces signal interference
• Protects against electrical interference or chemical corrosion
• 15 kV ESD protection for serial signals
• Compact size

 

• “Ring” and “Point- to-Point” transmission
• Extends RS-232/422/485 transmission up to:
• 40 km with single-mode—TCF-142-S
• 5 km with multi-mode—TCF-142-M
• Decreases signal interference
• Protects against electrical interference and chemical corrosion
• Supports baudrates up to 921.6 kbps
• Wide temperature models available (-40 to 75°C)

 

• External power source supported but not required
• Compact size
• Converts RS-422, and both 2-wire and 4-wire RS-485
• RS-485 automatic data direction control
• Automatic baudrate detection
• 15 kV serial ESD protection
• Built-in 120-ohm termination resistors
• 2.5 kV isolation (for TCC-80I only)
• LED port power indicator

• Boost serial signal to extend transmission distance
• Wall or DIN-Rail mounting
• Terminal block for easy wiring
• Power input from terminal block
• DIP switch setting for built-in terminator (120 ohm)
• Boost RS-422 or RS-485 signal, or convert RS-422 to RS-485
• 2 kV isolation protection (TCC-120I)

• RS-232 to RS-422 conversion with RTS/CTS support
• RS-232 to 2-wire or 4-wire RS-485 conversion
• 2 kV isolation protection (TCC-100I)
• Wall and DIN-Rail mounting
• Plug-in terminal block for easy RS-422/485 wiring
• LED indicators for power, Tx, Rx
• Wide temperature model available (-40 to 85°C)

• 1x DB9 interface supports RS232, 2-wire RS485, 4-wire RS485 and RS422 operation
• Asynchronous serial data rates up to 921600bps
• Data mode includes VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair, Modbus converter server / client and Serial Telnet modes 

Ethernet Port:

• 1x 100BASE-FX SFP slot 

Management:

• IPv4 and IPv6 dual stack management
• Remote Management Interfaces
  
  • IP-based Web management
  • Telnet console management
  • Windows-based VCOM utility supports searching, monitoring and configuration setting
• IP NTP (Network Time Protocol) 
• Standard TCP/IP interface and versatile operation modes
• Software Protocol supports ICMP, TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client 
• Serial Operation mode selected via management interface
• Pair Connection mode for connecting two serial devices over a network
• Allows a maximum of 4 hosts to be accessed as TCP client mode
• Firmware upgrade via HTTP protocol
• Accessible IP security control to prevent illegal users
• Event notification
  
  • Remote syslog server
  • SNMP trap
• DHCP client for IP address assignment 
• PLANET Smart Discovery utility automatically finds the client devices on the network 

Case and Installation:

• Compact size for easy Installation
  
  • Standalone -- Wall mountable or DIN-rail mounting (optional accessory)
  • Co-works with PLANET MC family Media Chassis (MC-700/1500)
• External power adaptor 5V DC, 2A max.
• Supports 6000 VDC Ethernet ESD protection
• -10 to 60 degrees C operating temperature
• Supports extensive LED indicators for network diagnosis
• Reset button for resetting to factory default

Cost-effective Solution for RS232/422/485 Serial-to-Ethernet Application:
PLANET ICS-115A Serial Device Server is specially designed to convert RS232, RS422 or RS485 serial communication to Fast Ethernet networking to extend the network distance efficiently and inexpensively.  There is one 100BASE-FX single-mode/multi-mode media available in the ICS-115A and its operating temperature ranges from -10 to 60 degrees C for your network needs. The ICS-115A is a time-saving and cost-effective solution for users and system integrators to quickly transform their serial devices into the Ethernet network with no need of replacing the existing serial devices and software system. Extending Distance:
The ICS-115A is able to extend the distance of deploying serial equipment and hosts. The selectable fiber-optic cables on the basis of distance are provided. Therefore, this product will perfectly satisfy the diverse demands while providing reliable and efficient network solutions based on the distance and budgets of installation. Remote Management:
As the ICS-115A provides an easy serial-to-Ethernet connectivity and connection to a TCP/IP network, the remote network system can thus be managed efficiently via its Web, telnet and VCOM management interfaces. It supports both application and serial operation modes for alarm or IP address connection, which saves the network administrator’s time in detecting and locating network problems without visual inspection of the cabling and devices.  Multiple connection options are available for large networking environment as well. Easy Chassis Installation:
The ICS-115A can be used as a stand-alone unit or a slide-in module to PLANET Media Converter Chassis (MC-700 and MC-1500 chassis). The media chassis can assist in providing DC power to the ICS-115A and can be DIN-rail or wall mounted for efficient use of cabinet space, without the need of replacing the existing serial equipment and software system.

• 1x DB9 interface supports RS232, 2-wire RS485, 4-wire RS485 and RS422 operation
• Asynchronous serial data rates up to 921600bps
• Data mode includes VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair, Modbus converter server / client and Serial Telnet modes   

Ethernet Interface:

• 1x 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function  

Management:

• IPv4 and IPv6 dual stack management
• Remote Management Interfaces
  
  • IP-based Web management
  • Telnet console management
  • Windows-based VCOM utility supports searching, monitoring and configuration setting
• IP NTP (Network Time Protocol) 
• Standard TCP/IP interface and versatile operation modes
• Software Protocol supports ICMP, TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client 
• Serial Operation mode selected via management interface
• Pair Connection mode for connecting two serial devices over a network
• Allows a maximum of 4 hosts to be accessed as TCP client mode
• Firmware upgrade via HTTP protocol
• Accessible IP security control to prevent illegal users
• Event notification
  
  • Remote syslog server
  • SNMP trap
• DHCP client for IP address assignment 
• PLANET Smart Discovery utility automatically finds the client devices on the netw 

Case and Installation:

• Compact size for easy Installation
  
  • Standalone -- Wall mountable or DIN-rail mounting (optional accessory)
  • Co-works with PLANET MC family Media Chassis (MC-700/1500)
• External power adaptor 5V DC, 2A max.
• Supports 6000 VDC Ethernet ESD protection
• -10 to 60 degrees C operating temperature
• Supports extensive LED indicators for network diagnosis
• Reset button for resetting to factory default

Cost-effective Solution for RS232/422/485 Serial-to-Ethernet Application:
PLANET ICS-110 Serial Device Server is specially designed to convert RS232, RS422 or RS485 serial communication to Fast Ethernet networking to extend the network distance efficiently and inexpensively.  There is one 10/100BASE-TX RJ45 port in the ICS-110 and its operating temperature ranges from -10 to 60 degrees C for your network needs. The ICS-110 is a time-saving and cost-effective solution for users and system integrators to quickly transform their serial devices into the Ethernet network with no need of replacing the existing serial devices and software system. Remote Management:
As the ICS-110 provides an easy serial-to-Ethernet connectivity and connection to a TCP/IP network, the remote network system can thus be managed efficiently via its Web, telnet and VCOM management interfaces. It supports both application and serial operation modes for alarm or IP address connection, which saves the network administrator’s time in detecting and locating network problems without visual inspection of the cabling and devices.  Multiple connection options are available for large networking environment as well. Easy Chassis Installation:
The ICS-110 can be used as a stand-alone unit or a slide-in module to PLANET Media Converter Chassis (MC-700 and MC-1500 chassis). The media chassis can assist in providing DC power to the ICS-110 and can be DIN-rail or wall mounted for efficient use of cabinet space, without the need of replacing the existing serial equipment and software system.

• 4 channels of 4 kV RMS isolation for 1 minute
• External power source supported but not required
• 15 kV serial ESD protection
• Automatic baudrate detection ››Compact size

• Speziell für raue Umgebungen entwickelt
• CCTV, Fabrik, Küstengebiete, staubige Umgebung usw.
• Drei verschiedene Modelle erfüllen die Anforderungen verschiedener Geschäftsszenarien
• Einzigartiges Industriedesign gewährleistet stabilen Betrieb bei -40℃ bis 80℃
• 8 KV Schutz: Die Abschirmung gegen Spannungsspitzen
• IP40 gegen 1mm Eindringlinge in staubigen Bedingungen
• ERPS Plug-and-Play, ohne komplizierte Konfiguration
• Lokales Netzwerk SON, einfache Konfiguration auch ohne Cloud
• Ruijie Cloud: Einfaches Management auch in rauen Umgebungen

• Speziell für raue Umgebungen entwickelt
• CCTV, Fabrik, Küstengebiete, staubige Umgebung usw.
• Drei verschiedene Modelle erfüllen die Anforderungen verschiedener Geschäftsszenarien
• Einzigartiges Industriedesign gewährleistet stabilen Betrieb bei -40℃ bis 80℃
• 8 KV Schutz: Die Abschirmung gegen Spannungsspitzen
• IP40 gegen 1mm Eindringlinge in staubigen Bedingungen
• ERPS Plug-and-Play, ohne komplizierte Konfiguration
• Lokales Netzwerk SON, einfache Konfiguration auch ohne Cloud
• Ruijie Cloud: Einfaches Management auch in rauen Umgebungen

• Speziell für raue Umgebungen entwickelt
• CCTV, Fabrik, Küstengebiete, staubige Umgebung usw.
• Drei verschiedene Modelle erfüllen die Anforderungen verschiedener Geschäftsszenarien
• Einzigartiges Industriedesign gewährleistet stabilen Betrieb bei -40℃ bis 80℃
• 8 KV Schutz: Die Abschirmung gegen Spannungsspitzen
• IP40 gegen 1mm Eindringlinge in staubigen Bedingungen
• ERPS Plug-and-Play, ohne komplizierte Konfiguration
• Lokales Netzwerk SON, einfache Konfiguration auch ohne Cloud
• Ruijie Cloud: Einfaches Management auch in rauen Umgebungen

• 4G/LTE (Cat 4), 3G, 2G Konnektivität
• IP55-Pionier: IP55 Widerstandsfähigkeit für den Einsatz im Freien
• Auto Failover: Dual SIM mit automatischer Ausfallsicherung und anderen Umschaltszenarien
• PoE-In / Out: 1x PoE-In und 1x PoE-Out

Der OTD140-Router für den Außenbereich verfügt über ein spezielles und robustes IP55-Kunststoffgehäuse und eine integrierte Montagehalterung, wodurch dieser 4G-Router für den Außenbereich einfach zu installieren ist und den Umgebungsbedingungen im Freien standhält. Darüber hinaus ist dieser Outdoor-Router mit LTE Cat 4-Konnektivität, Kompatibilität mit RMS für Remote-Management-Funktionen und zwei PoE-in/out-Ethernet-Ports ausgestattet.

• Link any serial or Ethernet device to an IEEE 802.11a/b/g/n network
• 921.6 kbps baudrate for RS-232/422/485 transmissions
• Web-based configuration using built-in Ethernet or WLAN
• Enhanced surge protection for serial, LAN, and power
• Remote configuration with HTTPS, SSH
• Secure data access with WEP, WPA, WPA2
• Fast automatic wireless fast roaming
• Offline port buffering and serial data log
• Dual power inputs (1 screw-type power jack, 1 terminal block)
• Supports wireless clients

  Overview: The NPort® W2150A and W2250A are the ideal choice for connecting your serial or Ethernet devices, such as PLCs, meters, and sensors, to a wireless LAN. Your communications software will be able to access the serial devices from anywhere over a wireless LAN. Moreover, the wireless device servers require fewer cables and are ideal for applications that involve difficult wiring situations. In Infrastructure Mode or Ad-Hoc Mode, the NPort® W2150A and NPort® W2250A can connect to Wi-Fi networks at offices and factories to allow users to move, or “roam,” between several APs (Access Points), and offer an excellent solution for devices that are frequently moved from place to place.   802.11a/b/g/n Wireless Connectivity to Serial Devices: Wireless device servers require fewer cables and are ideal for applications that involve difficult wiring situations. In Infrastructure Mode or Ad-Hoc Mode, the NPort® W2150A and NPort® W2250A can communicate with any host computer through an access point, or with another NPort® W2150A or NPort® W2250A located up to 100 meters away.   Wireless Fast Roaming Function: Wi-Fi networks at offices and factories allow users to move, or “roam,” between several APs (Access Points). Moxa’s Fast Roaming function increases the roaming speed to unify AP channels and avoid wasting channel hopping time while roaming.   Wireless Client: Data can be seamlessly transferred between the serial line, LAN, and WAN, allowing the LAN and WLAN interfaces to be bridged together with one IP address.   Offline Port Buffering and Serial Data Log for Each Port: For mission-critical applications, data from the serial device must not be lost if the wireless connection goes down. The NPort® W2150A and NPort® W2250A are designed to continue operating if the wireless connection is disconnected temporarily. If the wireless connection is restraining, or if the connection fails, the serial data from the serial device will be queued in the built-in port buffer with over 10 MB of storage. As soon as the wireless connection returns to normal, the data stored in the buffer will be sent to its destination. In addition, a serial data log can be enabled to make troubleshooting easier.   The serial data log buffer for both the NPort® W2150A and NPort® W2250A is 64 KB per port.   Secure Remote Management and Configuration with SSH/HTTPS: Unauthorized access is one of the biggest headaches for system managers. In addition to IP filtering and password protection, the NPort® W2150A and NPort® W2250A also support SSH and HTTPS to provide protection from hackers. To transmit control messages securely, open the web console using a web browser that supports https (Internet Explorer, for example). You may also open the serial or Telnet console, such as PuTTY, using a terminal emulator that supports SSH.   Select “Any Baudrate” between 50 bps and 921.6 kbps: Most device servers only support a fixed number of serial baudrates. However, some applications require special baudrates, such as 250 kbps or 500 kbps. With the NPort® W2150A and NPort® W2250A, you can enter any baudrate between 50 and 921.6 kbps. If your device’s baudrate is not a standard baudrate, select “other” from the drop-down list and then enter the baudrate.

• Links serial and Ethernet devices to an IEEE 802.11a/b/g/n network
• Web-based configuration using built-in Ethernet or WLAN
• Secure Boot that only allows Moxa-authorized firmware to run on devices
• Remote configuration with HTTPS (TLS 1.3), SSH
• Secure data access with WEP, WPA, WPA2
• WPA/WPA2 Enterprise IEEE 802.1X/RADIUS (EAP-TLS 1.3)
• Fast roaming for quick automatic switching between access points
• Offline port buffering and serial data log
• Enhanced surge protection for serial, LAN, and power
• Dual power inputs (1 screw-type power jack, 1 terminal block)

The NPort® W2150A-W4 and W2250A-W4 are the ideal choice for connecting your serial and Ethernet devices, such as PLCs, meters, and sensors, to a wireless LAN. Your communications software will be able to access the serial devices from anywhere over a wireless LAN. Moreover, the wireless device servers require fewer cables and are ideal for applications that involve difficult wiring situations. In Infrastructure Mode, the NPort® W2150A-W4 and NPort® W2250A-W4 can connect to Wi-Fi networks at offices and factories to allow users to move, or roam, between several APs (access points), and offer an excellent solution for devices that are frequently moved from place to place.

• Enhanced surge protection for LAN/serial/power
• 2 kV isolation for serial signals
• Screw-type terminal blocks for secure power/serial connections
• C1D2, ATEX, and IECEx certified for harsh industrial environments
• Cascading Ethernet ports for easy wiring
• Redundant DC power inputs
• Warning by relay output and email
• -40 to 75°C operating temperature range (T models)

 

• Enhanced surge protection for LAN/serial/power
• 2 kV isolation for serial signals
• Screw-type terminal blocks for secure power/serial connections
• C1D2, ATEX, and IECEx certified for harsh industrial environments
• Cascading Ethernet ports for easy wiring
• Redundant DC power inputs
• Warning by relay output and email
• -40 to 75°C operating temperature range (T models)

   

• 16 serial ports supporting RS-232/422/485
• Standard 19-inch rackmount size
• 10/100M auto-sensing Ethernet
• Easy IP address configuration with LCD panel (excluding wide temperature models)
• Configure via Telnet/Web/Windows utility
• Socket modes: TCP server/TCP client/UDP/Real COM
• SNMP MIB-II for network management
• Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
• Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)

   

• 16 serial ports supporting RS-232/422/485
• Standard 19-inch rackmount size
• 10/100M auto-sensing Ethernet
• Easy IP address configuration with LCD panel (excluding wide temperature models)
• Configure via Telnet/Web/Windows utility
• Socket modes: TCP server/TCP client/UDP/Real COM
• SNMP MIB-II for network management
• Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
• Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)

 

• 10/100M auto-sensing Ethernet
• 4 serial ports supporting RS-232/422/485
• Built-in 15 kV ESD surge protection for all serial signals
• Socket modes: TCP server/TCP client/UDP/Real COM
• Configure via Telnet/Web/Windows utility
• SNMP MIB-II for network management
• 2 kV isolation protection for NPort 5430I/5450I/5450I-T
• -40 to 75°C operating temperature range (T model)

   

• Speedy 3-step web-based configuration
• Surge protection for serial, Ethernet, and power lines
• COM port grouping and UDP multicast applications
• Screw connectors for secure installation
• Dual DC power inputs with power jack and terminal block
• Versatile TCP and UDP operation modes

   

• Compact design for easy installation
• Socket modes: TCP server/TCP client/UDP
• Easy-to-use Windows utility for configuring multiple device servers
• Supports 10/100M Ethernet
• Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
• SNMP MIB-II for network management

   

• Only 1 W power consumption
• Speedy 3-step web-based configuration
• Surge protection for serial, Ethernet, and power lines
• COM port grouping and UDP multicast applications
• Screw connectors for secure installation
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile TCP and UDP operation modes
• Connect up to 8 TCP hosts

   

• Small size for easy installation
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile operation modes
• Easy-to-use Windows utility for configuring multiple device servers
• Built-in 15 kV ESD protection for all serial signals
• SNMP MIB-II for network management
• Configure by Telnet, web browser, or Windows utility
• Adjustable pull high/low resistor for RS-485 ports

 

• Serial device server with 6 or 12 digital IOs
• Links serial and Ethernet devices to an IEEE 802.11a/b/g/n network
• Connects serial/I/O data to the cloud through generic MQTT
• Supports MQTT connection with built-in device SDKs to Azure/Alibaba Cloud
• Supports MQTT connection with TLS and certificate in JSON and Raw data format
• microSD card for configuration backup/duplication and event logs, and data buffering when cloud connection is lost
• Supports repackaging the serial data size (up to 4K) to save the packet numbers that need to be sent to the cloud platform
• Supports redundant dual DC power inputs and 1 relay output
• Secure data access with WEP, WPA, WPA2
• Wireless Client function for flexible integration
• 4 kV serial surge protection

The NPort IA5000A-I/O serial device servers, which have built-in digital I/Os, provide maximum flexibility when you need to integrate serial equipment in the field with an Ethernet network or cloud platform. The cloud-ready device server can communicate with IIoT applications, using generic MQTT or third-party cloud services, such as Azure and Alibaba Cloud. The combination of digital I/Os makes the device servers well-suited for a variety of industrial data acquisition applications. The DI/Os on the device can be controlled over TCP/IP using the Modbus TCP protocol and can be configured and secured from a web browser. The device can also be installed as a COM Port (patented Real COM) on a Windows/Linux PC to make it compatible with legacy applications. All models are ruggedly constructed, DIN-rail mountable, and designed with redundant power inputs to ensure uninterrupted operation for industrial applications. Wireless Client:
The device servers are equipped with one Ethernet port that allows data to be transferred seamlessly between the serial line, LAN, and WAN, allowing the LAN and WLAN interfaces to be bridged together using a single IP address. Supports MTConnect Protocol for Monitoring Digital Inputs:
MTConnect is designed specifically for shop-floor applications that aim to convert shop-floor data into a standard format that can be understood by any MTConnect-compliant software applications. Once the data has been defined by an MTConnect-compliant interface (name, type, description, etc.), it eliminates the need to redefine the data within each application. For those legacy machine tools that do not support MTConnect, the common practice is to get machine-related data through sensor connections and I/Os. Moxa NPort IAW5000A-I/O supports MTConnect-enabled capability for all digital inputs on the device and provides a configurable interface for users to define what data and appropriate MTConnect tags need to be tied to the digital inputs. Secure Remote Management and Configuration with SSH/HTTPS:
Unauthorized access is one of the biggest headaches for system managers. In addition to IP filtering and password protection, the NPort IAW5000A-I/O Series also supports SSH and HTTPS to provide protection from hackers. To transmit control messages securely, open the web console using a web browser that supports HTTPS (Internet Explorer, for example). You may also open the serial or Telnet console, such as PuTTY, using a terminal emulator that supports SSH. Select Any Baudrate Between 50 bps and 921.6 kbps:
Most device servers only support a fixed number of serial baudrates. However, some applications require special baudrates, such as 250 kbps or 500 kbps. With the NPort IAW5000A-I/O Series, you can use any baudrate between 50 and 921.6 kbps. If your device’s baudrate is not a standard baudrate, select “other” from the drop-down list and then enter the baudrate.

• Wave-2 802.11ac Dual Band WiFi mit einer Geschwindigkeit von bis zu 867 Mbps
• 4x Gigabit Ethernet mit Geschwindigkeiten von bis zu 1000 Mbps
• 1x WAN, 3x LAN
• RMS (Teltonika Remote Management System) kompatibel
• Bluetooth LE für Nahbereichskommunikation
• Quad Core ARM Cortex A7 CPU, 717 MHz
• RutOS - benutzerfreundliches, sicheres und funktionsreiches Betriebssystem

  Teltronika hat den RUTX10 Next Generation Enterprise-Router speziell für kleine bis mittlere Büroanwendungen entwickelt. Er ist mit Dual Band WiFi 5 802.11ac ausgestattet, das für eine hohe Datenübertragung und ein verzögerungsfreies Surferlebnis von größter Bedeutung ist. RUTX10 bietet die neuesten Sicherheitsfunktionen und die Möglichkeit, die Nutzung Ihrer Bürodaten aus der Ferne zu überwachen und zu steuern.   RutOS ist das Herzstück von RUTX10 und lässt sich in hohem Maße anpassen. Tatsächlich ist es jedoch eine Synergie zwischen Hardware und Software, die dieses Gerät zur perfekten Leistung in Unternehmenslösungen macht. Die Quad-Core-ARM-Cortex-A7-CPU mit 717 MHz ist mehr als ausreichend für die VPN-Funktionalität. Wenn die Ausstattung nicht ausreicht, stehen 256 MB Flash-Speicher für die Installation zusätzlicher Protokolle zur Verfügung.   Software:

• Netzwerkprotokolle: TCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL, TLS, ARP, PPPoE, UPNP, SSH, Telnet
• Netzwerkfunktionen: NAT, statisches / dynamisches Routing, Firewall, H.232- und SIP-Alg-Protokoll NAT-Helfer, die das ordnungsgemäße Routing von VoIP-Paketen ermöglichen
• Einzigartige Netzwerkfunktionen: VLAN, WEB-Filter, Lastenausgleich, Netzwerksicherung
• Verbindungsüberwachung: Ping-Neustart, periodischer Neustart, Wget-Neustart, LCP und ICMP zur Verbindungsüberprüfung
• Authentifizierung: Pre-Shared Key, digitale Zertifikate, X.509-Zertifikate
• Einstellungen beibehalten: Aktualisieren Sie die Firmware, ohne die aktuelle Konfiguration zu verlieren
• Überwachung und Verwaltung: WEB-UI, SSH, SNMP, JSON-RPC, FOTA, RMS
• Unterstützte Sprachen: Busybox Shell, Lua, C, C ++

• 4G (LTE) - KAT6 bis zu 300 Mbps
• 3G bis zu 42 Mbps
• DC-HSDPA / HSUPA / WCDMA
• Dual SIM, Auto-Switch
• 4x 1 Gbit Ethernet
• GPS (Antenne separat erhältlich)
• SMS

  Mobil:

• Mobilmodul: 4G (LTE) - Kat6 bis 300 MBit/s, 3G - Bis zu 42 MBit/s
• SIM-Switch: 2 SIM-Karten, Auto-Switch-Gehäuse: schwaches Signal, Datenlimit, SMS-Limit, Roaming, kein Netzwerk, Netzwerk verweigert, Datenverbindung fehlgeschlagen, SIM-Leerlaufschutz
• Status: Signalstärke, SINR, RSRP, RSRQ, Bytes gesendet / empfangen
• Bridge: Direkte Verbindung (Bridge) zwischen mobilem ISP und Gerät im LAN
• SMS: SMS-Status, SMS-Konfiguration, Senden / Lesen von SMS über HTTP POST / GET, EMAIL an SMS, SMS an EMAIL, SMS an HTTP, SMS an SMS, geplante SMS, SMS automatisch, SMPP
• Black / White-Liste: Operator-Black / White-Liste
• Multiple PDN: Möglichkeit, verschiedene PDNs für den Zugriff auf mehrere Netzwerke und Dienste zu verwenden
• Band Management: Bandsperre, Statusanzeige des verwendeten Bands

  Ethernet:

• WAN: 1 x WAN (kann für LAN konfiguriert werden) 10/100/1000 Mbps, entsprechen den Standards IEEE 802.3, IEEE 802.3u und 802.3az und unterstützen Auto-MDI / MDIX-Crossover
• LAN: 3 x LAN-Ports, 10/100/1000 Mbps, entsprechen den Standards IEEE 802.3, IEEE 802.3u und 802.3az und unterstützen Auto-MDI / MDIX-Crossover

  Netzwerk:

• Routing: Statisches Routing, dynamisches Routing (BGP, OSPF v2, RIP v1/v2)
• NetSnapper (optional): Mobile Verbindungsverwaltung, Datenkomprimierungs-VPN-Client (nicht in Standard-FW verfügbar)
• Netzwerkprotokolle: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRP, PPP, PPPoE, UPNP, DHCP, Telnet, SMPP, MQTT
• VoIP Passthrough-Unterstützung: H.323- und SIP-alg-Protokoll NAT-Helper ermöglichen das ordnungsgemäße Routing von VoIP-Paketen
• Verbindungsüberwachung: Ping Reboot, Periodic Reboot, LCP und ICMP für die Verbindungsprüfung
• Firewall: Portweiterleitung, Traffic Rules, benutzerdefinierte Regeln
• DHCP: Statische und dynamische IP-Zuweisung, DHCP Relay
• QoS: Warteschlangen für Traffic Priority nach Quelle / Ziel, Dienst, Protokoll oder Port, WMM, 802.11e
• DDNS: Unterstützt> 25 Service Provider, andere können manuell konfiguriert werden
• Netzwerk-Backup: VRRP-, Mobile- und Wired WAN-Optionen, von denen jede als Backup verwendet werden kann, wobei automatisches Failover verwendet wird
• Lastverteilung: Verteilen Sie Ihren Internetverkehr über mehrere WAN-Verbindungen
• SSHFS (optional): Möglichkeit zum Anhängen eines Remote-Dateisystems über das SSH-Protokoll (nicht in Standard-FW verfügbar)

  Sicherheit:

• Authentifizierung: Vorinstallierter Schlüssel, digitale Zertifikate, X.509-Zertifikate
• Firewall: Vorkonfigurierte Firewall-Regeln können über Web-UI aktiviert werden, unbegrenzte Firewall-Konfiguration über CLI. DMZ; NAT; NAT-T
• Einbruch Prävention: DDOS-Prävention (SYN-Flutschutz, SSH-Angriffsverhütung, HTTP / HTTPS-Angriffsverhütung), Port-Scan-Verhinderung (SYN-FIN, SYN-RST, X-mas, NULL-Flags, FIN-Scan-Angriffe)
• VLAN: Portbasierte und Tag-basierte VLAN-Trennung
• Mobile Quota Control: Legen Sie benutzerdefinierte Datenlimits für beide SIM-Karten fest
• WEB-Filter: Blacklist zum Blockieren unerwünschter Websites, Whitelist zur Angabe zulässiger Websites
• Zugriffskontrolle: Flexible Zugriffskontrolle von TCP, UDP, ICMP-Paketen, MAC-Adressenfilter

  VPN:

• OpenVPN: Mehrere Clients und Server können gleichzeitig ausgeführt werden (12 Verschlüsselungsmethoden)
• OpenVPN-Verschlüsselung: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES- 128-CBC, AES-192-CBC, AES-256-CBC
• IPsec: IKEv1, IKEv2, unterstützt bis zu 4x VPN-IPsec-Tunnel (Instanzen) mit 5 Verschlüsselungsmethoden (DES, 3DES, AES128, AES192, AES256).
• GRE: GRE-Tunnel
• PPTP, L2TP: Client / Server-Dienste können gleichzeitig ausgeführt werden
• STunnel: Proxy, der den bestehenden Clients und Servern die TLS-Verschlüsselungsfunktion hinzufügt, ohne dass der Programmcode geändert wird.

  Überwachung & Management:

• WEB: UI HTTP / HTTPS, Status, Konfiguration, FW-Update, CLI, Problembehandlung, Ereignisprotokoll, Systemprotokoll, Kernelprotokoll
• FOTA: Firmware-Update vom Server, automatische Benachrichtigung.
• SSH: SSH (v1, v2)
• SMS: SMS-Status, SMS-Konfiguration, SMS per HTTP POST / GET senden / lesen
• TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, freundliche Technologie, AV-Systeme
• SNMP: SNMP (v1, v2, v3), SNMP-Trap
• JSON-RPC: Verwaltungs-API über HTTP / HTTPS
• MODBUS: MODBUS TCP Status / Steuerung
• TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, freundliche Technologie, AV-Systeme
• MQTT: MQTT Broker, MQTT-Herausgeber
• RMS: Teltonika Remote Management System (RMS)

  Systemmerkmale:

• CPU: Quad-Core ARM Cortex A7, 717 MHz
• RAM: 256 MB, DDR2
• FLASH-Speicher: 256 MB SPI-Flash

  Firmware / Konfiguration:

• WEB UI: FW von Datei aktualisieren, FW auf dem Server prüfen, Konfigurationsprofile, Konfigurationssicherung
• FOTA: FW / Konfiguration vom Server aktualisieren
• RMS: Aktualisieren Sie die Firmware / Konfiguration für mehrere Geräte
• Einstellungen beibehalten: FW aktualisieren, ohne die aktuelle Konfiguration zu verlieren

  Firmware-Anpassung:

• Betriebssystem: RutOS (OpenWrt-basiertes Linux OS)
• Unterstützte Sprachen: Busybox-Shell, Lua, C, C ++
• Entwicklungstools: SDK-Paket mit bereitgestellter Umgebung

  Standortverfolgung:

• GNSS: GPS, GLONASS, BeiDou, Galileo und QZSS
• Koordinaten: GNSS-Koordinaten über WebUI, SMS, TAVL, RMS
• NMEA: NMEA 0183
• Serversoftware: Unterstützte Serversoftware TAVL, RMS
• Geolokalisierung des Mobilfunknetzes: Standort ohne GPS, ungefähre Position basierend auf Mobile Tower auf RMS
• Geofencing: Konfigurierbare mehrere Geofence-Zonen

  USB:

• Datenrate: USB 2.0
• Anwendungen: Samba-Freigabe, benutzerdefinierte Skripts
• Externe Geräte: Möglichkeit zum Anschließen einer externen Festplatte, eines Flash-Laufwerks, eines zusätzlichen Modems und eines Druckers
• Speicherformate: FAT, FAT32, NTFS

  Leistung:

• Anschluss: 4-polige DC-Industriesteckdose
• Eingangsspannungsbereich: 9 - 50 VDC, Verpolungsschutz, Überspannungs- / Überspannungsschutz
• PoE (passiv): Passives PoE. Möglichkeit zum Hochfahren über einen LAN-Anschluss, nicht kompatibel mit den Standards IEEE 802.3af und 802.3at
• Leistungsaufnahme: 11W max.

  Physikalische Schnittstellen:

• Ethernet: 4 x RJ45-Ports, 10/100/1000 Mbps
• Status-LEDs: 3 x Verbindungsstatus-LEDs, 5x Verbindungsstärke-LEDs, 8x LAN-Status-LEDs, 3x WAN-Status-LEDs, 1x Power-LED
• SIM: 2 x SIM-Steckplätze (Mini SIM - 2FF), 1,8 V / 3 V
• Stromversorgung: 4-polige DC-Industriesteckdose
• Antennen: 2 x SMA für LTE, 1 x SMA für GNNS
• USB: USB A-Buchse für externe Geräte
• Reset: Zum Zurücksetzen / Zurücksetzen auf die Standardschaltfläche

  Physikalische Spezifikation:

• Gehäusematerial: Vollaluminiumgehäuse
• Abmessungen: 115 mm x 95 mm x 44 mm (H x B x T)
• Gewicht: 456 g
• Montagemöglichkeiten: DIN-Schiene (kann an zwei Seiten montiert werden), flache Auflagefläche

  Betriebsumgebung:

• Betriebstemperatur: -40 ° C bis 75 ° C
• Betriebsfeuchtigkeit: 10% bis 90% nicht kondensierend
• Schutzart: IP30

• 4G (LTE) - bis zu 150 Mbps
• 3G - bis zu 42 Mbps
• WiFi - bis zu 150 Mbps
• GPRS
• SMS

  Hardware:

• LTE
• WLAN
• 9 - 30 VDC
• Interne WiFi-Antenne
• Input für Zündung
• SIM-Kartenschublade

  Software:

• Dynamisches DNS
• Periodischer Neustart
• Mobile auf Anfrage
• Hotspot
• Mobile Quota Control
• Backup WAN
• NTP
• Ping Reboot
• Webfilter
• Schlafmodus

  RUT850 ist ein LTE Wireless Router mit kompaktem und schlanken Design . Er unterstützt die neuesten IEEE802.11n und IEEE802.11b/g WLAN-Standards und bietet drahtlose Sende- und Empfangsrate bis zu 150 Mbps. LTE - bis zu 150 Mbps DL und 50 Mbps UL.   LTE-Unterstützung: Ob es sich um eine lange Familienreise, einen Campingplatz oder eine Notwendigkeit, ein Back-End-Büro zu erreichen - RUT850 hat Sie abgedeckt. Dieser schlanke Automobil-Router unterstützt High-Speed-LTE CAT4, die Geschwindigkeiten von bis zu 150Mbps für Ihre Freizeit-oder Geschäftsanforderungen bietet.   Drahtloses Netzwerk: Mit der Unterstützung der neuesten IEEE802.11n und IEEE802.11b/g WLAN-Standards können Sie sicher sein, dass das volle LTE KAT4 Potenzial realisiert werden kann: keine Engpässe von LTE zu WiFi. Verbinden Sie mehrere Geräte, sehen Sie Filme, Video-Streams oder verbinden Sie sich mit Leichtigkeit via Remote  mit Ihrer Ausrüstung.   Energieversorgung: RUT850 kann entweder in leichten Fahrzeugen oder Bussen, Lastwagen und anderen schweren Transport, die eine 24V-Batterie verwendet, eingesetzt werden. Dies wird durch einen breiten Eingangsspannungsbereich und Überspannungsschutz möglich - keine zusätzliche Überspannungsschutzausrüstung. Der Netzstecker verfügt über einen Zünd-Digitaleingang, der den Ruhezustand des Routers steuert.   Android-App: Richten Sie Ihre Internet-Konnektivität ein und machen Sie sich bereit, in wenigen Minuten mit nur wenigen Klicks von Ihrem Smartphone aus. Verwalten und überwachen die Leistung des Routers ohne physische Verbindung zum Gerät.   RMS-Unterstützung: Verwalten Sie Ihre Router-Flotte aus der Ferne. Mit voller Unterstützung des zentralisierten Teltonika Remote Management Systems können Sie alle Router innerhalb einer einzigen Plattform aufrufen, steuern und überwachen. Dies wird Ihnen helfen, bessere Entscheidungen für zukünftige Installationen und Best-Use-Praktiken zu treffen.