SHOP

Hersteller MikroTik

Hersteller, MikroTik - ACSMAUFL
U.fl - SMA Female Pigtail
Preis auf Anfrage
U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - ACUFL
U.fl-N Female Pigtail
Preis auf Anfrage
U.fl-HIROSE - N female pigtail cable for adding external antennas. Total length including connectors is 385mm.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-2HND
R11e-2HPnD 802.11b/g/n miniPCI-e Karte mit U.FL Anschlüssen
Preis auf Anfrage
  • Network adapter with 802.11b/g/n
  • 2x ufl
  • miniPCIe card
  • Max. 800mW output power
  High power wireless cards in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e/RB14eU.   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-2HPND
802.11b/g/n High Power miniPCI-e Karte mit MMCX Anschlüssen
Preis auf Anfrage
  • Network adapter with 802.11a/b/g/n
  • 2.4Ghz band
  • Max. 1000mW output power
  • 2x MMCX connector
  High power wireless cards in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e/RB14eU.   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-4G
R11e-4G miniPCI-e Karte für internationale Bänder
Preis auf Anfrage
  • 4G/LTE miniPCI-e card
  • Supports Bands 3/7/20/31/41n/42/43
  • LTE Channel Bandwidth: 5/10/15/20 MHz
  • Max. 1000mW output power
  • 2x uFL connections
  4G/LTE miniPCI-e card with support for bands 5/10/15/20.   Can be used with any of MikroTik products with RouterOS and miniPCIe slot (except RB800).
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-5HACD
R11e-5HacD 802.11a/c High Power miniPCI-e Karte mit MMCX Anschlüssen
Preis auf Anfrage
  • Network adapter with 802.11ac/a/n
  • 5Ghz
  • Max. 500mW output power
  • 2x MMCX connector
  The new AC standard is here, with up to 866Mbit datarate and 256-QAM modulation and 80MHz channels. 802.11ac opens up new possibilities and speeds never possible before.   R11e-5HacD is our new 802.11ac card in miniPCIe format, perfect for any RoutrBOARD with miniPCIe slot, such as RB953, RB912, RB800 or x86 devices with RouterOS.   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-5HND
R11e-5HnD 802.11a/n High Power miniPCI-e Karte mit MMCX Anschlüssen
Preis auf Anfrage
  • Network adapter with 802.11a/n
  • Supports 5 Ghz band
  • Max. 1000mW output power
  • 2x MMCX connections
  High power wireless cards in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e.   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R11E-LTE
R11e-LTE miniPCI-e Karte für internationale Bänder
Preis auf Anfrage
  • 2G/3G/4G/LTE miniPCI-e card
  • Supported Bands:
    • LTE: 1/2/3/7/8/20/38/40
    • 3G: 1/2/5/8
    • 2G: 2/3/5/8
  • LTE Channel Bandwidth: 1.4/3/5/10/15/20 MHz
  • Max. 1000mW output power
  • 2x uFL connections
  2G/3G/4G/LTE miniPCI-e card with support for bands 1/2/3/5/7/8/20/38/40.   Can be used with any of MikroTik products with RouterOS and miniPCIe slot (except RB800).
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R2SHPN
R2SHPn 802.11b/g/n 2.4Ghz Super High Power MiniPCI card with
Preis auf Anfrage
This is a 2GHz super high power wireless card for long range links and powerful access points. This is the professional choice for reaching the last mile. 1.6W transmit power will give you the ability to reach even further than before. Up to 125Mbit throughput is possible with this device!   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.   The card comes with a preinstalled industrial grade heatsink, one MMCX connector and nine LED indicator lights.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R52H
R52H 802.11a/b/g High Power Dual Band MiniPCI Karte
Preis auf Anfrage
  • 802.11a/b/g
  • MiniPCI 2.4 - 5Ghz card
  • 350mW output power
  • Does not require any drivers
  802.11a+b+g miniPCI card for multiband high speed applications, with up to 350mW output power. It works on 2.192-2.539 and 4.920-6.100GHz frequency range (in RouterOS only) and supports Turbo mode for faster transfers. The card performs best when coupled with MikroTik RouterOS.  
  • Turbo, 802.11a, 802.11b and 802.11g IN ONE
  • Operates in either 2.4GHz or 5GHz wireless bands
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R52HND
R52HnD 2.4/5Ghz miniPCI 802.11a/b/g/n Dual Chain, 2x MMCX, bis zu 400mW
Preis auf Anfrage
  • MiniPCI 2.4/5Ghz card
  • 802.11a/b/g/n
  • 400mW output power
  • Does not require any drivers
  The R52HnD is an update to our popular R52Hn miniPCI wireless card. It works in either 2.4 or 5GHz and now has even higher power (400mW) and improved ESD protection (+/- 15 kV)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R52NM
R52NM 802.11a/b/g/n Dual Band MiniPCI Karte mit MMCX Anschlüssen
Preis auf Anfrage
  • Network adapter with 802.11a/b/g/n
  • Supports 2.4GHz and 5GHz band
  • Transmission rates of up to 200Mbps
  • Max. 23 dBm TX-Power
  • RouterOS L4
  • 2x MMCX connections
  The RouterBOARD R52n-M miniPCI network adapter provides leading 802.11a/b/g/n performance in both 2GHz and 5GHz bands, supporting up to 300Mbps physical data rates and up to 200Mbps of actual user throughput on both the uplink and downlink. This card features the sturdy MMCX connectors for higher durability. Adding Wireless N to your Wireless device, it provides higher efficiency for everyday activities such as local network file transfers, Internet browsing, and media streaming.   Card has two MMCX connectors for external antennas
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - R5SHPN
R5SHPn 802.11a/n Super High Power MiniPCI card with MMCX connector
Preis auf Anfrage
  • MiniPCI 5Ghz card
  • 802.11a/n
  • 800mW output power
  • Does not require any drivers
  The new 5GHz super high power wireless card for long range links and powerful access points. This is the professional choice for reaching the last mile. 800mW transmit power will give you the ability to reach even further than before. Up to 125Mbit throughput is possible with this device!   The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.   The card comes with a preinstalled industrial grade heatsink, one MMCX connector and nine LED indicator lights.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - RB502
RB502 Daughterboard für RB532A, RB600A, RB800
Preis auf Anfrage
  • RouterBOARD RB502 Daughterboard
  • 2x miniPCI-Slots for RB800.
  • add RB502 to have up to 6x miniPCI-Slots on RB800!
  • Note: Only takes one R52Hn(EOL!) card due to R52Hn physical dimensions. Due to EOL we recommend: R52HnD or R52nM
  RouterBOARD 502 Daughterboard with two mini PCI slots for RB800. Add RB502 to have up to six miniPCI slots for RB800!
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - RB604
RB604 Daughterboard für RB600A und RB800
Preis auf Anfrage
RouterBOARD 604 daughterboard for RB800. Adds four more miniPCI wireless cards to your RB800 to have up to eight miniPCI!
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /