SHOP

Aktive Komponenten PoE - Power over Ethernet

PoE - Power over Ethernet
Hersteller
AvigilonAvigilonHikvisionHikvisionLightwinLightwinMikroTikMikroTikMimosaMimosaMoxaMoxaPLANETPLANETUbiquitiUbiquiti
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
LWL Faser Typ
250 µm250 µm250µm250µm50/125µm50/125µm50/125µm, OM250/125µm, OM250/125µm, OM350/125µm, OM350/125µm, OM450/125µm, OM462,5/125µm62,5/125µm62.5/125µm62.5/125µm9/125µm9/125µm9/125µm, OS2, G.657.A19/125µm, OS2, G.657.A19/125µm, OS2, G657A9/125µm, OS2, G657A900 µm900 µmMulti-ModeMulti-Mode
LWL Stecker 1
E2000E2000E2000/APCE2000/APCFCFCFC/APCFC/APCLCLCLC/APCLC/APCMTRJMTRJSCSCSC / UPCSC / UPCSC/APCSC/APCSTSTST/APCST/APC
LWL Stecker 2
E2000E2000E2000/APCE2000/APCFCFCFC/APCFC/APCLCLCLC/APCLC/APCMTRJMTRJSCSCSC/APCSC/APCSTSTST/APCST/APC
Mantel
LSHFLSHFLSHF-FRNCLSHF-FRNCLSOHLSOHLSOH-FRNCLSOH-FRNCLSOH, Outdoor Anti-UVLSOH, Outdoor Anti-UVLSOH, UV-beständigLSOH, UV-beständigLSOH3LSOH3PA, UV-beständigPA, UV-beständigPURPURPVCPVCPVC mit verstärktem NylonmantelPVC mit verstärktem NylonmantelUV-Beständig, LSOHUV-Beständig, LSOH
Kabel Länge
0,1 m0,1 m0,14 m0,14 m0,15 m0,15 m0,2 m0,2 m0,20 m0,20 m0,25 m0,25 m0,3 m0,3 m0,35 m0,35 m0,5 m0,5 m0,75 m0,75 m0.1 m0.1 m0.14 m0.14 m0.15 m0.15 m0.2 m0.2 m0.5 m0.5 m0.6 m0.6 m1 m1 m1,0 m1,0 m1,2 m1,2 m1,5 m1,5 m1,6 m1,6 m1,7 m1,7 m1,8 m1,8 m1.0 m1.0 m1.5 m1.5 m1.8 m1.8 m10,0 m10,0 m10.0 m10.0 m100 m100 m100,0 m100,0 m1000 m1000 m11,0 m11,0 m12,0 m12,0 m13,0 m13,0 m15,0 m15,0 m17 m17 m17,0 m17,0 m19,0 m19,0 m2,0 m2,0 m2,5 m2,5 m2,7 m2,7 m2.0 m2.0 m2.5 m2.5 m20,0 m20,0 m22,0 m22,0 m23,0 m23,0 m24,0 m24,0 m25,0 m25,0 m26,0 m26,0 m27,0 m27,0 m28,0 m28,0 m29,0 m29,0 m3,0 m3,0 m3.0 m3.0 m3.0 Meter3.0 Meter30,0 m30,0 m305 m305 m35,0 m35,0 m36,0 m36,0 m4,0 m4,0 m40,0 m40,0 m5,0 m5,0 m5.0 m5.0 m50,0 m50,0 m50.0 m50.0 m500 m500 m6 m6 m6,0 m6,0 m6.0 m6.0 m7,0 m7,0 m7,5 m7,5 m70,0 m70,0 m75,0 m75,0 m8,0 m8,0 m80,0 m80,0 m9,0 m9,0 m9.0 m9.0 mAdapterAdapterMeterwareMeterware
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, PLANET - CB-M12EXT-10
4-Pin D-Coding M12 Male an D-Coding M12 Female, 10 Meter
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - CB-M12RJ
4-Pin D-Coding M12 Male an RJ-45 Ethernet Cable, 1.2 Meter
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - CB-M12RJ-10
4-Pin D-Coding M12 Male an RJ-45 Ethernet Cable, 10 Meter
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - CRS112-8P-4S-IN
CRS112-8P-4S-IN Cloud Router Switch mit QCA8511 400Mhz, 8x Gbit, 4x SFP, PoE Out
Preis auf Anfrage
  • 4x SFP
  • 8x 10/100/1000 Ethernet ports
  • PoE IEEE 802.3af/at
  • CPU with 400MHz
  • RouterOS
  • Temperature monitoring
  CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.   CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - DS-1H34
DS-1H34 Series PoE Video Repeater
Preis auf Anfrage
  • Support 1-ch input and 1-ch output, and 1-ch input and 2-ch output PoE relay function.
  • Support EXTEND mode of PSE (Power Sourcing Equipment) output interface. The transmission distance of Single-stage network can be extended to 250 meters when the EXTEND mode is enabled.
  • Standard Cat. 5e twisted pair. For 100 Mbps mode, the repeater supports 4-stage cascade and the max. transmission distance reaches 500 meters (terminal power consumption < 5W). For EXTEND mode, the max. transmission distance reaches 500 meters (terminal power consumption < 5W).
  • IEEE802.3at and IEEE802.3af are supported for PoE output.
  • 10/100BaseT(X) (RJ45 interface).
  • IEEE802.3, IEEE802.3u and IEEE802.3x network standards available.
  • Store-and-forward switching method.
  • The time delay of data exchange is shorter than 5 microseconds.
  • The working temperature range for wide temperature range models is within -30ËšC to 70ËšC.
  • Solid metal case of high strength.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Hikvision - DS-3E0105P-E
4-Port 10/100TX Unmanaged PoE Switch, IEEE 802.3af/at, 58W
Preis auf Anfrage
  • Optional 820 ft (250 m) Extended Transmission Mode
  • 4 x 10/100 Mbps Auto-MDIX Ports
  • IEEE 802.3at/af PoE Compliant
  • 30 Watts per PoE Port, PoE Power Budget 58 W
  • 4 kV Surge Protection
  • IEEE 802.3x Flow Control Support
  • Plug-and-Play Installation
  • 1 Gbps Switching Fabric
  • 448 Kbits RAM Data Buffer
  • 1000 MAC Address Entries
  • Sturdy Metal Enclosure
   The DS-3E0105P-E is a 10/100 Mbps unmanaged switch that requires no configuration and provides four PoE (Power-over-Ethernet) ports. It can automatically detect and supply power to all IEEE 802.3af/at compliant powered devices. In theses situations, electrical power is transmitted alngside data in single cable, allowing network expansion where there are no power lines or outlets, for devices such as IP cameras, IP phones, etc.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-G205A-4POE(-1GSFP)
EDS-G205A-4PoE Serie, Gigabit unmanaged Switche, PoE Ports
Preis auf Anfrage
  • Full Gigabit Ethernet ports
  • IEEE 802.3af/at, PoE+ standards
  • Up to 30 watts output per PoE port
  • 24/48 VDC flexible redundant power inputs
  • Supports 9.6 KB jumbo frames
  • Intelligent power consumption detection and classification
  • Smart PoE over current and short circuit protection
  • -40 to 75°C operating temperature range (T models)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 4
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-P206A-4POE©
EDS-P206A-4PoE Serie, unmanaged Switche, PoE Ports
Preis auf Anfrage
  • IEEE 802.3af/at compliant PoE and Ethernet combo ports
  • Up to 30 watts per PoE port
  • 24/48 VDC wide range redundant power inputs
  • Intelligent power consumption detection and classification
  • Redundant dual VDC power inputs
  • -40 to 75°C operating temperature range (T models)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 14
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ERPOE-5©
EdgeRouter PoE, 5-Port Router mit PoE
Preis auf Anfrage
  • (5) Gigabit routing ports
  • (5) PoE configurable ports
  • Supports 24V PoE
  • Supports 48V PoE when using 48Vdc Power Adapter (not included)
  • (3) ports configurable for switching
  • 1 million packets per second for 64-byte packets
  • Power supply: 100-240VAC 24VDC 2.5A
  The EdgeRouter™ PoE combines 1 million packets per second routing performance with passive PoE support for network devices.   Versatile Functionality Use the EdgeRouter™ PoE’s advanced feature set to run applications on the customizable open platform.   Powerful Routing Performance The EdgeRouter™ PoE routes up to 1 million packets per second to meet the needs of carrier-class networks.   Convenient PoE Support The EdgeRouter™ PoE supports 24V or 48V passive PoE to power multiple devices on the network.   Carrier-Class Reliability The EdgeRouter™ PoE delivers uptime performance equal to leading carrier or enterprise technology solutions.   EdgeOS™ - Advanced UI The intuitive, graphical user interface is easy to learn and makes routing features simple to configure and monitor. It includes an integrated Command-Line Interface (CLI) for convenient access to advanced functions.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-16-150W
EdgeSwitch, 16-Port, 150W
Preis auf Anfrage
  • (16) Gigabit RJ45 ports
  • (2) SFP ports
  • Total, non-blocking throughput: 18 Gbps
  • Maximum power consumption: 150W
  • Supports POE+ IEEE 802.3at/af and 24V Passive PoE
  • Rackmountable
  Available also with with 8, 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ delivers robust performance, PoE+ support and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models.   Enterprise-Class Features The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Convenient PoE+ Support The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.   Breakthrough Value The EdgeSwitch™ provides top price/performance value: a full-featured, enterprise-class switch.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-24-250W
EdgeSwitch, 24-Port, 250W
Preis auf Anfrage
  • (24) Gigabit RJ45 ports
  • (2) SFP ports
  • Total, non-blocking throughput: 26 Gbps
  • Maximum power consumption: 250W
  • Supports POE+ IEEE 802.3at/af and 24V Passive PoE
  • Rackmountable
  Available with 8, 16, 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ delivers robust performance, PoE+ support and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models.   Enterprise-Class Features The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Convenient PoE+ Support The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-24-500W
EdgeSwitch, 24-Port, 500W
Preis auf Anfrage
  • (24) Gigabit RJ45 ports
  • (2) SFP ports
  • Total, non-blocking throughput: 26 Gbps
  • Maximum power consumption: 500W
  • Supports POE+ IEEE 802.3at/af and 24V Passive PoE
  • Rackmountable
  Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ delivers robust performance, PoE+ support and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models.   Enterprise-Class Features The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Convenient PoE+ Support The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-24-LITE
EdgeSwitch, 24-port, Lite, Kein POE
Preis auf Anfrage
  • (24) Gigabit RJ45 ports
  • (2) SFP ports
  • Total, non-blocking throughput: 26 Gbps
  • Maximum power consumption: 25W
  • Rackmountable
  Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ Lite delivers robust performance and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ Lite simultaneously processes traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for the fanless, 24-port models and up to 70 Gbps for the 48-port models.   Enterprise-Class Features The EdgeSwitch™ Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-48-500W
EdgeSwitch, 48-Port, 500W
Preis auf Anfrage
  • (48) Gigabit RJ45 ports
  • (2) SFP+ ports
  • (2) SFP ports
  • Total, non-blocking throughput: 70 Gbps
  • Maximum power consumption: 500W
  • Supports POE+ IEEE 802.3at/af and 24V Passive PoE
  • Rackmountable
  Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ delivers robust performance, PoE+ support and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models.   Enterprise-Class Features The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Convenient PoE+ Support The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-48-750W©
EdgeSwitch, 48-Port, 750W
Preis auf Anfrage
  • (48) Gigabit RJ45 ports
  • (2) SFP+ ports
  • (2) SFP ports
  • Total, non-blocking throughput: 70 Gbps
  • Maximum power consumption: 750W
  • Supports POE+ IEEE 802.3at/af and 24V Passive PoE
  • Rackmountable
  Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ delivers robust performance, PoE+ support and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for 24-port models and up to 70 Gbps for 48-port models.   Enterprise-Class Features The EdgeSwitch™ supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Convenient PoE+ Support The EdgeSwitch™ features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-48-LITE
EdgeSwitch, 48-port, Lite, Non-POE
Preis auf Anfrage
  • (48) Gigabit RJ45 ports
  • (2) SFP+ ports
  • (2) SFP ports
  • Total, non-blocking throughput: 70 Gbps
  • Maximum power consumption: 56W
  • Rackmountable
  Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch™ Lite delivers robust performance and intelligent switching for growing networks.   Powerful Enterprise Switch Models The EdgeSwitch™ Lite simultaneously processes traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for the fanless, 24-port models and up to 70 Gbps for the 48-port models.   Enterprise-Class Features The EdgeSwitch™ Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.   Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.   Advanced UI The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - F-POE
Fiber PoE
Preis auf Anfrage
  • Optical Data Transport for Outdoor POE Devices
  • Reliable Long-Distance Gigabit PoE Runs
  • Enhanced ESD Protection and EMI Reduction
  • Dependable 24V/50V Passive PoE Transport
  The FiberPoE™ connects remote PoE devices and provides data and power using fiber and DC cabling.   Fiber-to-Ethernet Conversion The FiberPoE provides fiber connectivity to any PoE device.   Designed for Outdoor Durability The FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.   Power Versatility The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - F-POE-G2
FiberPoE Gen2, LWL Konverter für Outdoor PoE Geräte
Preis auf Anfrage
  • Optical Data Transport for Outdoor POE Devices
  • Reliable Long-Distance Gigabit PoE Runs
  • Enhanced ESD Protection and EMI Reduction
  • Dependable 24V/50V Passive PoE Transport
  Fiber + Power Solution for Outdoor PoE Devices: Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low‑cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.   Separate Data and Power Transport: PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi‑directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.   Enhanced Surge Protection: Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.   Fiber Optic Data Transport: Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted‑pair cable.   The FiberPoE Gen 2 supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSD-1008HPS
8-Port 10/100TX 802.3at HP POE + 2Port Gbit combo Web Smart
Preis auf Anfrage
  • 8-port 10/100BASE-TX RJ45 copper with PoE in-line supported
  • 2-port 10/100/1000BASE-T RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots to share with Port-9 to Port-10
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 8 IEEE 802.3at / 802.3af devices powered
  • 125 watts PoE budget
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN
- IEEE 802.1Q tag-based VLAN, up to 30 VLANs groups, out of 4094 VLAN IDs - Port-based VLAN, up to 10 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 3 trunk / LACP groups, up to 4 ports per trunk / LACP group
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port, many-to-1
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • Ingress / Egress Rate Limit per port bandwidth control
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 / v2c switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Configuration upload/download through HTTP
  • Hardware reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility
   Ideal Cost-effective Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSD-1008HPS 802.3at PoE Web Smart Switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSD-1008HPS provides cost-effective, non-blocking wire-speed performance and intelligent PoE functions along with 8 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces, supporting high-speed transmission of surveillance images and videos.    Perfectly-integrated Solution for PoE IP Camera and NVR System Being different from the general IT industry PoE switch which usually contains 12 or 24 PoE ports, the FGSD-1008HPS provides eight 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 5.6Gbps high-performance switch architecture and 125-watt PoE power budget, the recorded video files from the 8 PoE IP cameras can be powered by the FGSD-1008HPS and saved in the 8-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSD-1008HPS can be combined with one 8-channel NVR and 8 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSD-1008HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSD-1008HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.    Robust Layer 2 Features The FGSD-1008HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSD-1008HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 30. Via aggregation of supporting ports, the FGSD-1008HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.    Flexible and Extendable Uplink Solution The FGSD-1008HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSD-1011HP
8-Port 10/100TX 802.3at POE + 1-Port 10/100/1000T + 1-Port SFP, Desktop Switch
Preis auf Anfrage
  • 8x 10/100Mbps Fast Ethernet ports
  • 1x 10/100/1000BASE-T Gigabit Ethernet port
  • 1x 1000BASE-X mini-GBIC SFP interface
  Power over Ethernet:
  • Complies with IEEE 802.3af/at Power over Ethernet end-span
  • Up to 8 IEEE 802.3af/2 IEEE 802.3at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • 120-watt PoE budget
  • 8 ports supporting 52V DC power to PoE powered device (Ports 1 to 8)
  • Hardware DIP switch for "Standard", "VLAN' and "Extend" mode selection; the "Extend" mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in the standard mode
  Switching:
  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • Automatic address learning and address aging
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware:
  • 9-inch desktop size, 1U height, mountable
  • LED indicators for PoE ready/activity and LINK/ACT
  • Fanless design
  • Internal AC power supply
  • Support Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSD-1022VHP
8-Port 10/100TX 802.3at PoE + 2-Port Gbit TP/SFP combo(120W)
Preis auf Anfrage
  • 8-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 53V DC power to PoE Powered Device
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 12-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 1 silent fan to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSD-1022VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSD-1022VHP is equipped with 8 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 120 watts and non-blocking data switching performance, the FGSD-1022VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSD-1022VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSD-1022VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. The FGSD-1022VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode.   The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.   In the “Extend” operation mode, the FGSD-1022VHP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSD-1022VHP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Furthermore, its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.    Flexible and Extendable Two Gigabit Uplink Solution The FGSD-1022VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for IP surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSD-1022VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSD-1022VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSD-1022VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-1816HPS
16-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Physical Port
  • 16-port 10/100Base-TX RJ-45 copper with PoE in-line supported
  • 2-port 10/100/1000Base-T RJ-45 copper
  • 2 1000Base-X mini-GBIC/SFP slots to share with Port-17 to Port-18
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 16 IEEE 802.3at / 802.3af devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential - PoE schedule   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN:
- IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs - Port-based VLAN, up to 16 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (Static Trunk)
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1d Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (Many-to-1)
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Hardware reset button for system reboot or reset to factory default
  Ideal Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSW-1816HPS 802.3at PoE web smart switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSW-1816HPS provides intelligent PoE functions along with 16 10/100Base-TX ports featuring 30-watt 802.3at PoE+ with RJ-45 copper interfaces and 2 Gigabit TP/SFP combo interfaces supporting high-speed transmission of surveillance images and videos.    Perfectly- integrated Solution for PoE IP Camera and NVR System Being different from the general IT industrial PoE switch which usually contains 12 or 24 PoE ports, the FGSW-1816HPS provides 16 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 7.2Gbps high-performance switch architecture and 220-watt PoE power budget, the recorded video files from 16 PoE IP cameras can be powered by the FGSW-1816HPS and saved in the 8 / 16 / 32-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSW-1816HPS can be combined with one 16-channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSW-1816HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSW-1816HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 50W, 100W, 150W and 190W of PoE power usage.    PoE Schedule for Energy Saving Besides being used as an IP Surveillance, the FGSW-1816HPS is certainly applicable to constructing any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the FGSW-1816HPS can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function is for you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.    Robust Layer 2 Features The FGSW-1816HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-1816HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 32. Via aggregation of supporting ports, the FGSW-1816HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.   Flexible and Extendable Uplink Solution The FGSW-1816HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ-45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-1822VHP
16-Port 10/100TX 802.3at PoE + 2Port Gbit TP/SFP Combo(300W)
Preis auf Anfrage
  • 16-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 54V DC power to PoE Powered Device
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 19-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 2 silent fans to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
    Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-1822VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-1822VHP is equipped with 16 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-1822VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-1822VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-1822VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-1822VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-1822VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-1822VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-1822VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-1822VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-2622VHP
24Port 10/100TX 802.3at PoE + 2Port Gbit TP/SFP Combo (300W)
Preis auf Anfrage
  • 24-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 54V DC power to PoE Powered Device
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 19-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 2 silent fans to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-2622VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-2622VHP is equipped with 24 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-2622VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-2622VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-2622VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-2622VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-2622VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-2622VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-2622VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-2622VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-2624HPS(4)
24-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Physical Port
  • 24-port 10/100BASE-TX RJ45 copper with 24-port IEEE 802.3at/af PoE injector
  • 2-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
  • Reset button for system management
  Power over Ethernet
  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 24 IEEE 802.3at / 802.3af devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Power Usage
  • PoE Management
    • Per port PoE function enable/disable
    • PoE Port Power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • PoE power sequential
  Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs
    • Port-based VLAN, up to 26 VLAN groups
    • MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1d Spanning Tree Protocol
    • RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (Many-to-1)
  Quality of Service
  • 2 priority queues on all switch ports
  • Traffic classification
    • Port-based priority
    • IEEE 802.1p-based priority
    • IP TOS / DSCP-based priority
    • TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2 (excluding IGMP Query feature)
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Management
  • Switch Management Interfaces
    • Web switch management
    • SNMP v1 switch management
  • Firmware upload/download via HTTP
  • Hardware reset button for system reboot or resetting to factory default
   Cost-effective PoE+ Managed Switch for Small and Medium Networking Particularly designed for the growing popular IP surveillance applications, PLANET FGSW-2624HPS / FGSW-2624HPS4 802.3at PoE web smart switch is a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSW-2624HPS / FGSW-2624HPS4 provides PoE functions along with 24 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces supporting high-speed transmission of surveillance images and videos. With a total power budget of up to 220 watts and 420 watts for different kinds of PoE applications, respectively, the FGSW-2624HPS and FGSW-2624HPS4 provide a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Centralized Power Management for Security and Public Service PoE Applications To fulfill the needs of the high power consumption of PoE network applications, the FGSW-2624HPS / FGSW-2624HPS4 features the standard IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 30 watts of power output and data per port over one cat5E/6 Ethernet cable. It is designed specifically to meet the demand of the high power consumption of network PDs (powered devices) such as IR, PTZ, speed dome cameras; and even box-type IP cameras with built-in fan and heater. Compliant with both 802.3at and 802.3af standards, the series allows more flexibility in power requirement for a variety of PDs, making installation costs affordable.    Intelligent LED Indicator for Real-time PoE Usage The FGSW-2624HPS / FGSW-2624HPS4 helps users to monitor the current status of PoE power usage easily and efficiently with its advanced LED indication. Called “PoE Power Usage” found on the front panel of the FGSW-2624HPS / FGSW-2624HPS4 Fast Ethernet PoE+ Switch, it has four orange LEDs indicating the range of the current PoE power usage.    Robust Layer 2 Features The FGSW-2624HPS / FGSW-2624HPS4 can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-2624HPS / FGSW-2624HPS4 provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 32. Via aggregation of supporting ports, the FGSW-2624HPS / FGSW-2624HPS4 allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.    Remote and Centralized Management For catering to the need of easy management and centralized SNMP application to monitor the status of the switch and traffic per port, the FGSW-2624HPS / FGSW-2624HPS4 provides friendly Web management interface for efficient network operation. With its built-in Web-based management, the FGSW-2624HPS / FGSW-2624HPS4 offers an easy-to-use, platform-independent management and configuration facility. It also supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software.    Flexible and Extendable Uplink Solution The FGSW-2624HPS / FGSW-2624HPS4 provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to 10/20/30/40/50/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 3
mehr Informationen
zu Favoriten
Hersteller, MikroTik - FIBERBOX
FiberBox CRS105-5S-FB, Outdoor Router mit 5x SFP, 400MHz CPU, RouterOS Level 5
Preis auf Anfrage
  • 8x SFP, 1.25Gbps, DDMI Support
  • 1x S-RJ01 RJ45 SFP module included
  • CPU with 1 Core
  • CPU Frequency 400MHz
  • RouterOS, Level 5
  The Fiberbox is an outdoor router with five SFP ports, ideal for locations where distance is restricting the use of regular ethernet cables. The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers.   The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box. If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-1600P©
16-Port 10/100Mbps unmanaged PoE Fast Ethernet Switch
Preis auf Anfrage
• 16 10/100Mbps Fast Ethernet ports • All ports support 48V DC power to PoE Powered Device   Power over Ethernet • Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE • Up to 16 IEEE 802.3af devices powered • PoE Power Budget 125 watts • Supports PoE Power up to 15.4 watts for each PoE port • Auto detect powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Switching • Hardware based 10/100Mbps auto-negotiation and auto MDI / MDI-X • Flow control for full duplex operation and back pressure for half duplex operation • Integrates address look-up engine, supporting 8K absolute MAC addresses • Automatic address learning and address aging   Hardware • 19-inch size, 1U height • LED indicators for PoE ready and PoE activity • 2 silent fans to support stable and efficient power performance   Centralized Power Distribution for Ethernet Networking To fulfill the demand of sufficient PoE power for network applications with 10/100Mbps wire speed transmission, PLANET introduces a new member in the 802.3af PoE Fast Ethernet Switch family – FNSW-1600P, the 16-Port 10/100Mbps 802.3af Power over Ethernet Switch with 125-watts PoE budget. The 16 Fast Ethernet ports integrated with 802.3af PoE injector function are able to drive at least 9 x IEEE 802.3af 12.95-watt Class 3 compliant powered devices. The FNSW-1600P also provides a simple, cost-effective, and non-blocking wire-speed performance with 19-inch metal shape for deployment in compact housing, SOHO office or department network application.   Great Ethernet Traffic Transmission Ability The FNSW-1600P features high performance switch architecture capable of providing the non-blocking 3.2Gbps switch fabric and wire-speed throughput as high as 2.38Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x full-duplex flow control function of the FNSW-1600P enables PD devices and servers directly connect to the Switch for wire-speed packet transfer performance without risk of packet loss.   Easy and Cost-effective Network Deployment With data and power over Ethernet from one unit, the FNSW-1600P is able to reduce the need of cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 125-watts Power Budget, the FNSW-1600P is ideal for small business and workgroups deploying the PoE for the wireless access points, IP surveillance cameras and IP phones in any places easily and efficiently.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-1608PS
16-Port 10/100Mbps with 8-Port PoE Web Smart Ethernet Switch
Preis auf Anfrage
  • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
  • 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Switch
  • 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8)
  • Each Switching port supports auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) supported
  • Auto-MDI / MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • 4K MAC address table, automatic source address learning and ageing
  • 2.75Mb embedded memory for packet buffers
  • Remote Web interface for Switch management and setup
  • SNMP Trap for alarm notification of events
  • Broadcast Storm Control support
  • Supports up to 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
  • Supports up to 2 Trunk groups, each trunk for up to maximum 4 ports with 800Mbps bandwidth
  • Supports QoS, bandwidth control and MAC address filter / TCP & UDP filter on each port
  • Supports port mirroring function and IGMP Snooping v1 / v2
  • PoE power Disable/Enable and PoE power consumption monitoring by management interface
  • Firmware upgrade through Web interface
  • Password setting, IP setting and device description setting through Planet Smart discovery utility
  • 19-inch rack mount size
  • Internal full-range power supply suitable for worldwide use
  • EMI standards complies with FCC, CE class A
  For cost saving purpose and providing advanced management functions, PLANET has released the new version of the FNSW-1608PS, the layer 2 web smart switch with PoE injector function built in. The FNSW-1608PS features 16 10/100Mbps Fast Ethernet ports with 8 IEEE 802.3af PoE interfaces. It supports MDI / MDI-X convertible on 16 10/100Mbps ports and provides PoE inject function on Port 1 to Port 8 which is able to drive 8 IEEE 802.3af compliant powered devices. The PoE power feeding can be set disable / enable and the PoE power consumption can be monitored for effective power usage.   With its auto-negotiation capability, all the RJ-45 / STP ports of the FNSW-1608PS can be configured to speeds of 10/20Mbps / 100/200Mbps (Fast Ethernet) automatically. In addition, the FNSW-1608PS is equipped with the MDI/MDI-X auto detection for easy plug and play connection, regardless of cabling types in straight through or crossover. The FNSW-1608PS also provides a simple, cost-effective, and highly reliable network connection for data and power transmission. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks. It fits all kinds of Ethernet installations such as campus, workgroup, department, enterprise, telecom or industrial applications.   The FNSW-1608PS features non-blocking 3.2Gbps backplane that greatly simplifies the tasks of upgrading your LAN for catering to increasing bandwidth demands. For efficient management, the FNSW-1608PS switch is equipped with remote Web interface and can be programmed for advanced switch management functions such as SNMP Alert Trap, port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, MAC address / TCP & UDP filter and IGMP Snooping.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-2400PS
24-Port 10/100 Web/Smart Ethernet POE Switch (125W)
Preis auf Anfrage
• 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector • Reset button for system management   Power over Ethernet • Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE • Up to 24 IEEE 802.3af devices powered • Supports PoE Power up to 15.4 watts for each 802.3af PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Layer 2 Features • Auto-MDI / MDI-X detection on each RJ-45 port • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports VLAN:  –IEEE 802.1Q Tag-based VLAN  –Port-based VLAN  –MTU VLAN (Multi-Tenant Unit VLAN) • Supports Link Aggregation  –up to 2 trunk groups  –up to 4 Fast Ethernet ports per trunk group  –IEEE 802.3ad LACP (Link Aggregation Control Protocol) • Supports Spanning Tree Protocol  –STP, IEEE 802.1D (Classic Spanning Tree Protocol)  –RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)  –Loopback Detection • Port mirroring to monitor the incoming or outgoing traffic on a particular port   Quality of Service • 2 priority queues on all switch ports • Traffic classification:  –Port-based priority  –IEEE 802.1p based priority  –IP TOS / DSCP based priority  –TCP / UDP Port-based QoS • Strict priority and Weighted Round Robin (WRR) CoS policies • In/Out rate limit control on each port • Broadcast Storm Control support   Multicast • Supports IGMP Snooping v1 and v2   Security • MAC address filter • TCP & UDP filter on each port • Management idle time security   Management • Remote Web interface for Switch management and setup • Supports SNMP v1 • Supports DHCP Option 82 and DHCP Relay • Firmware upgrade through Web interface • Configuration upload / download through Web interface • Reset button for system reboot or reset to factory default   Cost-effective Edge Network Connection Solution To provide enhanced network management with cost saving benefit to customers, PLANET has released a new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrated with PoE injector function. With 125-watt PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.   IEEE 802.3af Power over Ethernet Support The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP surveillance cameras. With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in the long run and offer customers the key benefit – energy saving.   Easy Cabling Installation The Power over Ethernet technology enables the Ethernet wire to carry both data and power. Thus, the FNSW-2400PS reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.   Friendly Web-based Management For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allow the FNSW-2400PS to have a maximum of up to 24 port-based VLAN groups or up to 32 IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk to combine multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-1008HP
8-Port 10/100TX 802.3at PoE + 2-Port 10/100TX Desktop Switch, 120W PoE Budget
Preis auf Anfrage
  • 10x 10/100BASE-TX Fast Ethernet RJ45 copper
  • 8x IEEE 802.3at PoE+ Injector (Port-1 to Port-8)
  Power over Ethernet:
  • Complies with IEEE 802.3at Power+ over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 30.8 watts for each PoE port
  • Each port supports 55V DC power to PoE powered device
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in standard mode with 250m in extend mode
  Switching:
  • Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8)
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware:
  • 9-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • Fanless design
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten