SHOP

Aktive Komponenten PoE - Power over Ethernet

PoE Extender
Hersteller
PLANETPLANET
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
PoE
IEEE 802.3 afIEEE 802.3 afIEEE 802.3 af/atIEEE 802.3 af/atIEEE 802.3 atIEEE 802.3 atIEEE 802.3 at/btIEEE 802.3 at/bt
Max. Distanz
4 units, daisy-chain installation with 500m support4 units, daisy-chain installation with 500m supportClass 1 (3.8 watts): 300m, Class 2 (6.5 watts): 300m , Class 3 (12.9 watts): 200m , Non-PoE (Da ...Class 1 (3.8 watts): 300m, Class 2 (6.5 watts): 300m , Class 3 (12.9 watts): 200m , Non-PoE (Da ...
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, PLANET - IPOE-E302
IP67 Industrial 1-Port 802.3bt PoE++ to 2-Port 802.3at Gigabit PoE Extender
Preis auf Anfrage
  • 3x 10/100/1000BASE-T Gigabit RJ45 ports
    • 1-port data + power input
    • 2-port data + power output 
Power over Ethernet:
  • 1-port data + power input
    • Complies with IEEE 802.3bt PoE++ Type 4 standard PD
    • Compatible with PoH (Power over HDBASE-T) protocol
    • Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
    • Supports PoE input power up to 95 watts
  • 2-port data + power output
    • Complies with IEEE 802.3at Power over Ethernet mid-span PSE
    • Up to 2 IEEE 802.3af/802.3at PoE devices powered
    • Supports total PoE budget up to 65 watts for 2 PoE output ports
    • Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device 
Layer 2 Features:
  • Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K jumbo frame support in 1000Mbps duplex mode
  • Automatic address learning and address aging 
Industrial Case and Installation:
  • IP67-rated aluminum case 
  • Wall-mount design
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • No external power cable required for installation
  • Plug and Play installation

Outdoor 802.3bt PoE++ Solution for Breaking RJ45 100m Limitation:
PLANET IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port 802.3at Gigabit PoE Extender designed especially for point to multipoint PoE application. The IPOE-E302 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. Weather-proof RJ45 Ethernet Connector and Shielded Plug:
The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. Environmentally-hardened Design:
With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment. Plug and Play, and Easy Cabling Installation:
The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD).  The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one "PoE++ In" port functions as PD input and the other two "PoE+ Out" ports on the other side function as PSE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously to a remote PD without affecting the data transmission performance. It offers a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-E201
IEEE 802.3at POE+ Repeater (Extender) - High Power POE
Preis auf Anfrage
• IEEE 802.3at / 802.3af Power over Ethernet compliant • Complies with IEEE 802.3 / 802.3u / 802.3ab 10/100/1000Base-T • Extends the range of PoE to more than 100 meters (328ft.) • Automatically detects and protects PoE equipment from being damaged by incorrect installation • Multiple units, daisy-chain installation support • Forwards both Ethernet data and PoE power to the remote device • No external power cable installation required • Compact size, wall-mountable design • Plug and Play   Long Distance High Power PoE and Gigabit Data Extension Solution PLANET POE-E201 is a newly designed simple device which extends both the reach of Gigabit Ethernet Data and IEEE 802.3at / 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT. 5/5e/6 UTP cable to 200m, 300m, 400m and maximum 500m.   Currently, PoE supported networking devices such as PoE IP cameras, PoE wireless access points and PoE IP Phones have become the mainstream of network deployment because of the convenience of easy installation regardless of additional power supply. However, limited by the UTP cable specifications, only up to 100 meters (328 ft.) of cable could be applied for IP-based and PoE powered devices (PD) installation. Therefore, the POE-E201 is designed as the repeater to forward both Gigabit Ethernet data and high power PoE power, and thus extend the range of PoE installation. By just plug and play without additional power supply and setup, one single POE-E201 can increase the PoE range to 200m. By daisy-chaining multiple POE-E201s, it offers you great flexibility to extend the distance of PoE network to triple, quadruple further in length or more.   Providing high power PoE and Gigabit Ethernet data extension ability, the POE-E201 is an ideal solution for service providers, campuses and public areas networking applications which require PoE deployment of wireless access points, IP-based surveillance or IP phones in any places. It enables you to centrally manage the power easily, efficiently and cost effectively.   Easy Cabling Installation The POE-E201 Gigabit high power PoE Extender is quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD). The POE-E201 injects power to the PD without affecting the data transmission performance. The POE-E201 offers a cost effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. This Gigabit high power PoE Extender is designed in a compact mini box containing 2 RJ-45 ports, of which the "PoE IN" port functions as PoE (Data and Power) input and the "PoE OUT" port on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector to transmit DC voltage in the Cat. 5/5e/6 cable and transfer data and power simultaneously between the PSE and PD.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-E202
1Port IEEE 802.3at PoE+ to 2-Port 802.3af/at Gbit PoE Extender
Preis auf Anfrage
  • 3-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input - 2-port data + power output   Power over Ethernet
  • 1-port data + power input
- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD - Supports PoE input power up to 30.8 watts
  • 2-port data + power output
- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE - Up to 2 IEEE 802.3af/802.3at devices powered - Supports PoE power up to 25 watts for each PoE port - Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device
  Layer 2 Features
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  Case and Installation
  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
  PoE Solution for Breaking RJ45 100m Limitation PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.   Plug and Play Installation The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.  
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /