SHOP

Glasfaser / FTTx

Hersteller, Lightwin - A-DQ (ZN)B2Y 04G50 OM2
LWL-Außenkabel A-DQ (ZN) B2Y, Multimode 50/125µm,
Preis auf Anfrage
  • Suitable for direct burial and indoor installation
  • Rodent resistant (non-metalic), water blocking
  • Halogen free, non metalic
  • UV-resistant
  • LSZH
  • Possible number of fibres:
    • Single Loose Tube for: 4 (04), 8 (08), 12 (12)
    • Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 08E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm, 8 Fasern
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 12E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm, 12 Fasern
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 144E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm, 144 Fasern
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 24E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm, 24 Fasern
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 24E09 SM 3KN
LWL-Außenkabel A-DQ (ZN)2Y, Singlemode 9/125µm, 24 fasrig, einblasfähig
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 48E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm,
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 72E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm,
Preis auf Anfrage
• Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking
• Halogen free, non metalic
• UV-resistant
• LSZH
• Possible number of fibres:
Single Loose Tube for: 4 (04), 8 (08), 12 (12)
Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - A-DQ (ZN)B2Y 96E09 OS2
LWL-Außenkabel A-DQ (ZN) B2Y, Singlemode 9/125µm, 96 Fasern
Preis auf Anfrage
  • Suitable for direct burial and indoor installation
• Rodent resistant (non-metalic), water blocking • Halogen free, non metalic • UV-resistant • LSZH • Possible number of fibres: Single Loose Tube for: 4 (04), 8 (08), 12 (12) Multi Loose Tube for: 24 (24), 48 (48), 96 (96), 144 (144)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - BASE GRID 1200
Sockelrost 1200X400X60 (BxHxT)
Preis auf Anfrage
  • Base Grids are the ideal grounding for the sockets.
  • The base grid, made of recycling material, can be installed easily and fast, the fixture of the socket is done with the delivered screws.
  • Advantages compared with concrete paving slabs are the easy transport and the possibility to cut the KSR without problems
  • Dimensions: 1200x400x60
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - BASE GRID 600
Sockelrost 600X400X60 (BxHxT)
Preis auf Anfrage
  • Base Grids are the ideal grounding for the sockets.
  • The base grid, made of recycling material, can be installed easily and fast, the fixture of the socket is done with the delivered screws.
  • Advantages compared with concrete paving slabs are the easy transport and the possibility to cut the KSR without problems
  • Dimensions: 600x400x60
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - BASE GRID 800
Sockelrost 800X400X60 (BxHxT)
Preis auf Anfrage
  • Base Grids are the ideal grounding for the sockets.
  • The base grid, made of recycling material, can be installed easily and fast, the fixture of the socket is done with the delivered screws.
  • Advantages compared with concrete paving slabs are the easy transport and the possibility to cut the KSR without problems
  • Dimensions: 800x400x60
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - BLINDSTOPFEN DSC
Blindstopfen für SC Duplex Bohrungen
Preis auf Anfrage
  • Blind plugs for front panels
  • Recess: DSC
  • Material: Plastic
  • Color: Black
  • Fixing by means of clip system
  Blind plugs for SC duplex holes
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - BLINDSTOPFEN SC
Blindstopfen für SC Simplex Bohrungen
Preis auf Anfrage
  • Blind plugs for front panels
  • Recess: SC
  • Material: Plastic
  • Color: Black
  • Fixing by means of clip system
  Blind plugs for SC simplex holes
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, - BLINDSTOPFEN ST
Blindstopfen für ST Bohrungen
Preis auf Anfrage
  • Blind plugs for front panels
  • Recess: ST
  • Material: Plastic
  • Color: Black
  • Fixing by means of clip system
  Blind plugs for ST holes
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM41133E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, MM OM4, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM411X3E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, MM OM4, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM41233E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, MM OM4, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM412X3E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, MM OM4, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS21133Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, SM, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS211X3Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, SM, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS21233Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, SM, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS212X3Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, SM, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Glasfaser / FTTx, - CLAUSS ABSETZZANGE CFS-2
Clauss-Absetzzange WS 5 zum Absetzen von 0,8 bis 2,6mm
Preis auf Anfrage
  • Fiber tweezers "Clauss"
  • For depositing 0.8 to 2.6 mm fibers (up to 250 μm)
  • Second opening for pulling off 2-3 mm outer jacket
  • Material: Metal
  • Color: Yellow / Black
  Clauss settling tongs WS 5 for depositing from 0.8 to 2.6mm, 250mm buffer coating
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, - CLEANING TISSUE 100
IPA Reinigungstücher, 100x100mm, 100 Stk.-Packung
Preis auf Anfrage
  • Lint-free cleaning cloths
  • For LWL ferrules
  • Dimensions: 100x100mm
  • 100 pcs.
  • Without alcohol
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, - CLEANING TISSUE 400
IPA Reinigungstücher, 100x100mm, 400 Stk.-Packung
Preis auf Anfrage
  • Lint-free cleaning cloths
  • For LWL ferrules
  • Dimensions: 100x100mm
  • 400 pcs.
  • Without alcohol
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Glasfaser / FTTx, Lightwin - CRIMPSPLEISSSCHUTZ-30
Crimpspleisschutz; 1,1x3,2x30mm,Streifen mit 30 Stück
Preis auf Anfrage
  • Splice guard for arc splices
  • Crimp version
  • Strip with 30 pcs.
  • Telecommunications permission
  • Color: Metal
  Crimp Splice Protection; 1,1x3,2x30mm, strip with 30 pieces
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - CWDM-CHASSIS-2
19" 1HE Chassis für 2 CWDM MUX/DEMUX Module
Preis auf Anfrage
The CWDM is a passive MUX/DEMUX unit, which allows to combine up to eight fiber links into one, to simplify and reduce the cost of long distance fiber installations. At the other location, the combined line is split back up again, so that instead of eight long fiber lines, you would only need one. The Coarse Wavelength-Division Multiplexing (CWDM) technology offers a solution which will increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling and will reduce costs for a new fiber optic deployment.   CWDM in your network will allow you to:
  • increase efficiency of existing fiber network
  • provide scalable and easy-to-deploy fiber channel services
  • reduce electricity consumption
  • reduce equipment maintenance and installation costs
  MikroTiks CWDM solution enables up to 8 channels for transmitting and receiving signals, with the wavelengths from 1470 nm to 1610 nm. A duplex fiber cable links two dual-fiber CWDM MUX/DEMUXs units, supporting the same wavelengths installed on each end of the fiber optic network. In each CWDM unit is a filter, which is tuned for a specific wavelength which is why it is important to connect the correct wavelength to the corresponding port. You can use a single optical fiber cable to create up to eight independent 1.25Gbps SFP (up to 40km) or 10Gbps SFP+ (up to 10km) links, offering more affordable alternative to installing more fiber or leasing additional fibers. You can even use 1.25Gbps modules and 10Gbps modules at the same time. CWDM MUX/DEMUX modules are passive devices and there is no power source required.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - CWDM-MUX8A
CWDM MUX/DEMUX Modul
Preis auf Anfrage
The CWDM is a passive MUX/DEMUX unit, which allows to combine up to eight fiber links into one, to simplify and reduce the cost of long distance fiber installations. At the other location, the combined line is split back up again, so that instead of eight long fiber lines, you would only need one. The Coarse Wavelength-Division Multiplexing (CWDM) technology offers a solution which will increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling and will reduce costs for a new fiber optic deployment.   CWDM in your network will allow you to:
  • increase efficiency of existing fiber network
  • provide scalable and easy-to-deploy fiber channel services
  • reduce electricity consumption
  • reduce equipment maintenance and installation costs
  MikroTiks CWDM solution enables up to 8 channels for transmitting and receiving signals, with the wavelengths from 1470 nm to 1610 nm. A duplex fiber cable links two dual-fiber CWDM MUX/DEMUXs units, supporting the same wavelengths installed on each end of the fiber optic network. In each CWDM unit is a filter, which is tuned for a specific wavelength which is why it is important to connect the correct wavelength to the corresponding port. You can use a single optical fiber cable to create up to eight independent 1.25Gbps SFP (up to 40km) or 10Gbps SFP+ (up to 10km) links, offering more affordable alternative to installing more fiber or leasing additional fibers. You can even use 1.25Gbps modules and 10Gbps modules at the same time. CWDM MUX/DEMUX modules are passive devices and there is no power source required.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - DC 10MM
High Quality Kupplung / Verbindungsmuffe für Einzelrohr, 10mm, Rohrdimension: 10
Preis auf Anfrage
  • Duct connector for single pipe
  • Color: transparent
  • Suitable for pipe dimension: 10MM
  • Water- and airproof
  • Easy clip system
  • For direct burial
  Microduct connector for single tube, color: transparent, suitable for pipe dimension: 10MM
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten