SHOP

Verkabelung Elektriker

Hersteller, PLANET - GS-4210-24P2S
24-Port Managed 802.3at POE+ Gbit Ethernet + 2-Port SFP
Preis auf Anfrage
  • 24-port 10/100/1000Base-T Gigabit RJ-45 copper
  • 2 100/1000Base-X mini-GBIC/SFP slots
  • RJ-45 console interface for switch basic management and setup
  • Reset button for system factory default and reboot
  • Complies with IEEE 802.3at High Power over Ethernet
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Total PoE power budget control - Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limitation - PoE delay - PD classification detection
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs - Protocol VLAN
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Maximum 8 LACP groups, up to 16 ports per LACP group - Cisco ether-channel (Static Trunk) - Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Ingress / Egress Rate Limit per port bandwidth control
  • Storm Control support
- Broadcast / Unknown-Unicast / Unknown-Multicast
  • Traffic classification
- IEEE 802.1p CoS - DSCP / IP Precedence of IPv4 / IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports IGMP Snooping v2 and v3
  • IGMP Querier mode support
  • IGMP Snooping port filtering
  • Up to 256 multicast groups
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - DHCP Option 82 - RADIUS / TACACS+ login user access authentication
  • Access Control List
- IPv4 IP-based ACL - IPv4 IP-based ACE - MAC-based ACL - MAC-based ACE
  • MAC Security
- Static MAC - MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  • Switch Management Interface
- Local Command Line Interface - Web switch management - Telnet Command Line Interface - SNMP v1, v2c and v3 - HTTPs secure access
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
- Firmware upload / download via HTTP / TFTP - Configuration upload / download through HTTP / TFTP - Dual Images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
  Cost-Optimized Managed PoE+ Switch for Small and Medium Businesses PLANET GS-4210-24P2S is an ideal Gigabit PoE Switch which provides cost-effective advantage to local area network and is widely accepted in the SMB office network. It offers intelligent Layer 2 data packet switching and management functions, friendly web user interface and stable operation. The model complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price. The GS-4210-24P2S is equipped with 24 10/100/1000Base-T Gigabit Ethernet ports and 2 100/1000Base-X SFP interfaces with inner power system. Its 24 Gigabit Ethernet ports integrated with 802.3at PoE+ injector function on all ports. It offers a rack-mountable, affordable, safe and reliable power solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data security and network traffic management.    IEEE 802.3at/af Compliant Power Source Switch The PoE in-line power following the IEEE 802.3at/af standard makes the GS-4210-24P2S able to deliver Gigabit speed data and up to 30 watts of power per port to 24 PoE compliant powered devices (PDs) with a combined power output budget of up to 300 watts. The GS-4210-24P2S provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.    Robust Layer 2 Features The GS-4210-24P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Spanning Tree protocol (STP), Rapid Spanning Tree protocol (RSTP) and Multiple Spanning Tree protocol (MSTP), IGMP Querier and IGMP Snooping. Via aggregation of supporting ports, the GS-4210-24P2S allows the operation of a high-speed trunk to combine with multiple ports such as a 32Gbps fat pipe and supports fail-over as well. The Link Layer Discovery Protocol (LLDP) feature is also included and used to discover basic information about neighboring devices on the local broadcast domain.   Efficient Traffic Control The GS-4210-24P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast / unicast storm control, per port bandwidth control, 802.1p / CoS / IP DSCP QoS priority and remarking. It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantages of the limited network resources.   Enhanced and Secure Management For efficient management, the GS-4210-24P2S is equipped with console, Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the GS-4210-24P2S offers secure remote management by supporting HTTPS and SNMPv3 connections which encrypt the packet content at each session.   Powerful Security PLANET GS-4210-24P2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. The Port Security allows limiting the number of users on a given port. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.   Flexible Extension Solution The two mini-GBIC slots built in the GS-4210-24P2S are compatible with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitor center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber) up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-24T2S
24-Port Layer 2 Managed Gigabit Switch mit SFP
Preis auf Anfrage
  • 24-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2x100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default
  • fanless
  Cost-Optimized Managed Switch for Small and Medium Businesses PLANET GS-4210-24T2S is an ideal Gigabit Switch which provides cost-effective advantage to local area network and is widely accepted in the SMB office network. It offers intelligent Layer 2 data packet switching and management functions, friendly web user interface and stable operation. Besides the hot IPv6 / IPv4 management and abundant L2 / L4 switching functions, the GS-4210-24T2S comes with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T2S is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 2 additional 100/1000BASE-X SFP interfaces with inner power system. It offers a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management.    Robust Layer 2 Features The GS-4210-24T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the GS-4210-24T2S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-24T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast / unicast storm control, per port bandwidth control, 802.1p / CoS / IP DSCP QoS priority and remarking. It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.    Enhanced and Secure Management For efficient management, the GS-4210-24T2S is equipped with console, Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T2S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the GS-4210-24T2S offers secure remote management by supporting HTTPS and SNMP v3 connections which encrypt the packet content at each session.    Powerful Security PLANET GS-4210-24T2S offers comprehensive IPv4 / IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows limiting the number of network devices on a given port.    Advanced Network Security The GS-4210-24T2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.    Flexible Extension Solution The two mini-GBIC slots built in the GS-4210-24T2S are compatible with the 100BASE-FX / 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitor center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber) up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T2S successfully reduces substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T2S is able to operate stably and quietly in any environment without affecting its performance.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-24T4S(R)
24-Port Layer 2 Managed Gigabit Switch mit 4x SFP, redundant Power optional
Preis auf Anfrage
  • 24-Port 10/100/1000BASE-T Gigabit RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default
  Switching:
  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Protocol VLAN
    • Voice VLAN
    • Private VLAN
    • Management VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
    • STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (Static Trunk)
    • Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  Quality of Service:
  • Ingress/Egress Rate Limit per port bandwidth control
  • Storm Control support
    • Broadcast/Unknown-Unicast/Unknown-Multicast
  • Storm Control support
    • Broadcast/Unknown-Unicast/Unknown-Multicast
  • Traffic classification
    • IEEE 802.1p CoS
    • TOS / DSCP/IP Precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast:
  • Supports IPv4 IGMP snooping v2 and v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  Security:
  • Authentication
    • IEEE 802.1X Port-based network access authentication
    • Built-in RADIUS client to co-operate with the RADIUS servers
    • DHCP Option 82
    • RADIUS/TACACS+ login user access authentication
  • Access Control List
    • IPv4/IPv6 IP-based ACL
    • IPv4/IPv6 IP-based ACE
    • MAC-based ACL
    • MAC-based ACE
  • MAC Security
    • Static MAC
    • MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • DoS Attack Prevention
  • SSH/SSL
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
    • Web switch management
    • Console/Telnet Command Line Interface
    • SNMP v1 and v2c switch management
    • SSHv2, TLSv1.2 and SNMP v3 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events)
    • SNMP trap for interface Link Up and Link Down notification
  • User Privilege Levels Control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Configuration upload / download through Web interface
    • Dual Images
    • Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Network Diagnostic
    • ICMPv6/ICMPv4 Remote Ping
    • Cable Diagnostics
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • Event message logging to remote Syslog server
  • PLANET NMS System and Smart Discovery Utility for deployment management
Redundant Power System (GS-4210-24T4SR):
  • Redundant 100~240V AC/36-72V DC dual power
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience

Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-1008HP
8-Port 10/100/1000Mbps 802.3at PoE + 2-Port 10/100/1000T Desktop Switch, 120W
Preis auf Anfrage
Rack Mount Kit ist enthalten!
  • 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
  • 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8)
  Power over Ethernet
  • Complies with IEEE 802.3at Power+ over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 30.8 watts for each PoE port
  • Each port supports 55V DC power to PoE powered device
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in standard mode with 250m in extended mode
  Switching
  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8)
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware
  • 9-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-503
5-Port 10/100/1000Mbps Gigabit Ethernet Switch (External
Preis auf Anfrage
  • 5-Port 10/100/1000Mbps Gigabit Ethernet
  • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
  • Supports auto MDI/MDI-X function
  • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 9K Jumbo packet size
  • Power saving ability for Green networking
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  • Made of metal, desktop size and wall-mount design
  • LED indicators for system power, per port 1000 & Link / Act
  • 5V DC, 1A external power adapter
  • FCC, CE Class B compliant
  Optimal Solution for Energy Saving and Gigabit High Performance PLANET Green Networking Switch - GSD-503 is an ideal solution in line with the energy-saving trend worldwide. The GSD-503 is a 5-port Gigabit Ethernet Switch bringing both benefits of energy saving and Gigabit wire speed performance. It is specially designed for home networking, SOHOs and enterprises.   Energy Saving The GSD-503 incorporates two advanced Green Networking technologies and is able to provide power saving up to 40% less energy but maintains high performance efficiently. (1) Hibernation Link Down power saving The Hibernation Link Down power saving goes beyond IEEE specifications to automatically lower power for a given port when it is not linked. With the Hibernation Link Down power saving technology, the GSD-503 will automatically adjust power usage of the ports that are shut down or not connected to network device. (2) Intelligent scales power based on cable length Intelligent scales power, the other technology adopted, is an intelligent algorithm that actively determines the appropriate power level based on cable length. When the GSD-503 is connected with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSD-503 would automatically detect the Ethernet cable length and diminish power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy saving.      Leading Home, SOHO and Workgroup Users to High-speed Networking Generation The GSD-503 is designed with modern metal compact housing and easy for deployment of high speed Gigabit networking in home or SOHO applications. Providing 10Gbps internal switching fabric, the GSD-503 can handle an extremely large amount of data in a secure topology linking to a backbone or high capacity servers. The GSD-503 provides 2K MAC address table, and offers wire-speed packet transfer performance without risk of packet loss. The high data throughput of the device makes it ideal for most Gigabit environments, especially for the network to be upgraded to a Gigabit environment.   Plug & Play All RJ-45 copper interfaces of the GSD-503 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 5, 5e or 6 cables. They support standard auto-MDI/MDI-X feature which can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.  
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-803
8-Port 10/100/1000Mbps Gigabit Ethernet Switch, External Power
Preis auf Anfrage
  • 8x10/100/1000Mbps Gigabit Ethernet ports
  • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
  • Supports auto MDI/MDI-X function
  • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Integrated address look-up engine, supporting 8K absolute MAC addresses
  • 9K Jumbo packet size
  • Power saving ability for Green networking
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  • Made of metal, desktop size and wall-mount design
  • LED indicators for system power, per port 1000 & Link / Act
  • 5V DC, 1A external power adapter
  • FCC, CE Class B compliant
  Optimal Solution for Energy Saving and Gigabit High Performance PLANET Green Networking Switch-GSD-803 is an ideal solution in line with the energy-saving trend worldwide. The GSD-803 is an 8-port Gigabit Ethernet Switch bringing both benefits of energy saving and Gigabit wire speed performance. It is specially designed for home networking, SOHOs and enterprises.   Energy Saving The GSD-803 incorporates two advanced Green Networking technologies and is able to provide power saving up to 40% less energy but maintains high performance efficiently. (1) Hibernation Link Down power saving The Hibernation Link Down power saving goes beyond IEEE specifications to automatically lower power for a given port when it is not linked. With the Hibernation Link Down power saving technology, the GSD-803 will automatically adjust power usage of the ports that are shut down or not connected to network device. (2) Intelligent scales power based on cable length Intelligent scales power, the other technology adopted, is an intelligent algorithm that actively determines the appropriate power level based on cable length. When the GSD-803 is connected with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSD-803 would automatically detect the Ethernet cable length and diminish power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy saving.      Leading Home, SOHO and Workgroup Users to High-speed Networking Generation The GSD-803 is designed with modern metal compact housing and easy for deployment of high speed Gigabit networking in home or SOHO applications. Providing 16Gbps internal switching fabric, the GSD-803 can handle an extremely large amount of data in a secure topology linking to a backbone or high capacity servers. The GSD-803 provides 8K MAC address table, and wire-speed packet transfer performance without risk of packet loss. The high data throughput of the device makes it ideal for most Gigabit environments, especially for the network to be upgraded to a Gigabit environment.   Plug & Play All RJ-45 copper interfaces of the GSD-803 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 5, 5e or 6 cables. They support standard auto-MDI/MDI-X feature which can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.  
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSW-2401©
24-Port 10/100/1000Mbps Unmanaged Gbit Ethernet Switch
Preis auf Anfrage
• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard • 24x 10/100/1000Mbps Gigabit Ethernet ports • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation • Integrated address look-up engine, support 8K absolute MAC addresses • 9K Jumbo packet support • Automatic address learning and address aging • Supports auto MDI/MDI-X function • Supports CSMA / CD protocol • 100-240V AC, 0.6A, 50/60Hz universal Power input • FCC, CE class A compliant   Cost-effective Gigabit Switch for Enterprise Backbone and Data Center Networking PLANET GSW-2401 Gigabit Ethernet Switch provides 24 RJ-45 10/100/1000Mbps ports for high-speed network connectivity. It can automatically identify and determine the correct transmission speed and half / full duplex mode of the attached devices with its 24 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-2401 can handle an extremely large amount of data transmission in a secure topology linking to a backbone or high-power servers.   High Performance The GSW-2401 provides high performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 48Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the Flow Control function of the GSW-2401 enables routers and servers directly connect to the Switch for fast and reliable data transfer.   All RJ-45 copper interfaces of the GSW-2401 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.   Excellent Traffic Transmission The GSW-2401 supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the GSW-2401 could recognize up to 8K different MAC address. The high data throughput and 48Gbps internal switching fabric makes it ideal for most Gigabit network environments, especially helpful for the network upgrading to a Gigabit environment.   Fanless Design The GSW-2401 successfully reduces substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GSW-2401 is able to operate stably and quietly in any environment without affecting its performance.  
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-10020HPT
Industrial 8-Port Gbit PoE(at) + 2Port SFP managed Switch
Preis auf Anfrage
  • 8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
  • 2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
  • One RJ45 console interface for basic management and setup
  Power over Ethernet
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 8 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE management features
- IEEE 802.3af and IEEE 802.3at mode switch control - Total PoE power budget control - Per port PoE function enable/disable - PoE admin-mode control - PoE port power feeding priority - Per PoE port power limit - PD classification detection - Temperature threshold control - PoE usage threshold control - PD alive check - PoE schedule   Industrial Case & Installation
  • IP30 aluminum case protection
  • DIN rail and wall-mount design
  • 48V DC, redundant power with polarity reverse protect function
  • Supports EFT protection of 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Digital Input & Digital Output
  • 2 Digital Input (DI)
  • 2 Digital Output (DO)
  • Integrate sensors into auto alarm system
  • Transfer alarm to IP network via email and SNMP trap
  Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
- Broadcast/Multicast/Unicast
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups, out of 4094 VLAN IDs - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Private VLAN Edge (PVE) - Protocol-based VLAN - MAC-based VLAN - Voice VLAN
  • Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP) - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN (MSTP) - BPDU Guard
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 5 trunk groups with 8 ports per trunk group - Up to 16Gbps bandwidth (duplex mode)
  • Provides port mirror (1-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)
  Layer 3 IP Routing Features
  • Supports maximum 32 software static routes and route summarization
  Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
- IEEE 802.1p CoS - IP TOS/DSCP/IP precedence - IP TCP/UDP port number - Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking
  Multicast
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security
  • IEEE 802.1x Port-based/MAC-based network access authentication
  • Built-in RADIUS client to cooperate with the RADIUS servers
  • TACACS+ login users access authentication
  • RADIUS/TACACS+ users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management
  • Switch Management Interfaces
- Console/Telnet Command Line Interface - Web switch management - SNMP v1 and v2c switch management - SSH/SSL and SNMP v3 secure access
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via HTTP/TFTP
  • DHCP Relay
  • DHCP Option 82
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP)
  • SFP-DDM (Digital Diagnostic Monitor)
  • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • Reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility for deployment management
   Environmentally Hardened Design PLANET Industrial 8-Port Gigabit 802.3at PoE Switch, IGS-10020HPT, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.    Redundant Ring, Fast Recovery for Surveillance System The IGS-10020HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ringtechnology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.    High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-10020HPT provides 8 10/100/1000Mbps ports featuring both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 270-watt power output and data per port over one Cat.5E / 6 Ethernet cable. With a total 270-watt PoE budget on the whole system, the IGS-10020HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) wireless LAN access points and other PoE network devices by providing PoE power double that the current conventional 802.3af PoE.    Intelligent Alive Check for Powered Device The IGS-10020HPT PoE Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the PD stops working and responding, the IGS-10020HPT will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability owing that the PoE port will reset the PD power, thus reducing administrator’s management burden.    PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-10020HPT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or enterprise save power and money.    Digital Input and Digital Output for External Alarm The IGS-10020HPT supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector ), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-10020HPT port shows link down, link up or power failure.    Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-10020 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.   Robust Layer 2 Features The IGS-10020HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-10020HPT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-10020HPT allows the operation of a high-speed trunk combining multiple ports. It enables a maximum up to 5 trunk groups with 8 ports per trunking, and supports fail-over as well.   Efficient Management For efficient management, the IGS-10020HPT Managed Ethernet Switch is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-10020HPT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-10020HPT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session.   Powerful Security The IGS-10020HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-nased and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.   Flexibility and Extension Solution The two mini-GBIC slots built in the IGS-10020HPT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) up to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Perfect Integration Solution for Outdoor IP PoE Camera and NVR System The IGS-10020HPT provides 8 10/100/1000Mbps 802.3at PoE ports and can offer sufficient PoE power for 8 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the IGS-10020HPT can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high performance switch architecture, the IGS-10020HPT facilitates the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-10020HPT undoubtedly brings an ideal secure surveillance system at a lower total cost.
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-10020MT
IP30 Industrial 8Port +2Port Gbit SFP managed Switch
Preis auf Anfrage
• 8-Port 10/100/1000Base-T RJ-45 copper • 2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection   Industrial Case / Installation • IP30 aluminum case protection • DIN-rail and wall mount design • Redundant Power Design  - 12 to 48V DC, redundant power with polarity reverse protect function  - AC 24V power adapter acceptable • Supports EFT protection 6000 VDC for power line • Supports 6000 VDC Ethernet ESD protection • -40 to 75 degrees C operating temperature   Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth • Storm Control support  - Multicast / Unknown-Unicast • Supports VLAN  - IEEE 802.1Q Tagged VLAN  - Up to 255 VLANs groups, out of 4095 VLAN IDs  - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)  - Private VLAN Edge (PVE)  - Protocol-based VLAN  - MAC-based VLAN  - Voice VLAN • Supports Spanning Tree Protocol  - STP, IEEE 802.1D Spanning Tree Protocol  - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol  - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN  - BPDU Guard • Supports Link Aggregation  - 802.3ad Link Aggregation Control Protocol (LACP)  - Cisco ether-channel (Static Trunk)  - Maximum 5 trunk groups, up to 10 ports per trunk group  - Up to 20Gbps bandwidth (duplex mode) • Provides Port Mirror (many-to-1) • Port Mirroring of the incoming or outgoing traffic on a particular port • Supports E.R.P.S. (Ethernet Ring Protection Switching)   Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification  - IEEE 802.1p CoS  - IP TOS / DSCP / IP Precedence  - IP TCP/UDP port number  - Typical network application • Strict priority and Weighted Round Robin (WRR) CoS policies • Supports QoS and In/Out bandwidth control on each port • Traffic-policing policies on the switch port • DSCP remarking   Multicast • Supports IGMP Snooping v1, v2 and v3 • Supports MLD Snooping v1 and v2 • Querier mode support • IGMP Snooping port filtering • MLD Snooping port filtering • MVR (Multicast VLAN Registration)   Security • IEEE 802.1x Port-based / MAC-based network access authentication • Built-in RADIUS client to co-operate with the RADIUS servers • TACACS+ login users access authentication • RADIUS / TACACS+ users access authentication • IP-based Access Control List (ACL) • MAC-based Access Control List • Source MAC / IP address binding • DHCP Snooping to filter untrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks • Auto DoS rule to defend DoS attack • IP address access management to prevent unauthorized intruder   Management • Switch Management Interfaces  -Web switch management  -Remote Telnet management  -SNMP v1, v2c, and v3 switch management  -SSH / SSL secure access • Four RMON groups (history, statistics, alarms, and events) • IPv6 IP Address / NTP / DNS management • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • Firmware upload/download via HTTP / TFTP • DHCP Relay • DHCP Option 82 • User Privilege levels control • NTP (Network Time Protocol) • System Log • Link Layer Discovery Protocol (LLDP) Protocol • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues • Reset button for system reboot or reset to factory default • PLANET Smart Discovery Utility for deploy management   PLANET IGS-10020MT is an Industrial 10-Port Full Gigabit Managed Ethernet Switch specially designed to build a full Gigabit backbone to transmit reliable but high speed data in heavy industrial demanding environments and forward data to remote network through fiber optic. It provides 8-port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong caiise with redundant power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the IGS-10020MT provides user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions. It is the best investment for industrial business expanding or upgrading its network infrastructure    IPv6 / IPv4 Full-functioned Secure Switch for Building Automation Networking The IGS-10020MT is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch, especially in the Industrial hardened environment. It supports both IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and Secure Management features to protect customer’s industrial and building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.    Redundant Ring, Fast Recovery for Surveillance System The IGS-10020MT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as 20 ms.    Environmentally Hardened Design With IP30 aluminum industrial case protection, the IGS-10020MT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-10020MT can be placed in almost any difficult environment.    Flexible and Extendable Solution The 2 mini-GBIC slots built in the IGS-10020MT support dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The IGS-10020MT supports SFP-DDM(Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-1020TF
IP30 Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP
Preis auf Anfrage
  • 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
  • 2 SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver type auto-detection
  • unmanaged
    Industrial Case and Installation
  • IP30 metal case protection
  • DIN rail and wall mount design
  • Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function - AC 24V power adapter acceptable
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
  Industrial-grade, Reliable and Flexible Network Deployment PLANET IGS-1020TF is an industrial 10-port full Gigabit Ethernet Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet deployment and extension in harsh environment. It provides 8-port 10/100/1000BASE-T RJ45 copper and 2 extra 100/1000BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-1020TF is well suited for applications in deploying surveillance system, secure control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.   Fiber-Optic Link Capability Enables Extension of Network Deployment The two mini-GBIC slots built in the IGS-1020TF support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and monitoring center in long distance.   Environmentally Hardened Design With IP30 rugged metal case protection, the IGS-1020TF provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-1020TF can be placed in almost any difficult environment. The IGS-1020TF also allows either DIN rail or wall mounting for efficient use of cabinet space.   Dual Power Input for High Availability Network System The IGS-1020TF features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-1020TF via power supply 2 alternatively without any loss of operation.    Energy Saving The IGS-1020TF, incorporating advanced green networking technologies and and IEEE 802.3az protocol based power saving, is able to provide power saving up to 50% less energy but maintains high performance efficiently. ■ Link Down power saving The Link Down power saving goes beyond IEEE specifications to automatically lower power consumption for a given port when it is not linked. With the Link Down power saving technology, the IGS-1020TF will automatically adjust power usage of the ports that are shut down or not connected to network device.   ■ Intelligent power scale based on cable length Intelligent power scale is an intelligent algorithm that actively determines the appropriate power level based on cable length. When the IGS-1020TF is connected with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the IGS-1020TF would automatically detect the Ethernet cable length and diminish power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy saving   Robust Protection The IGS-1020TF provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Plug and Power Network Deployment All of the RJ45 copper interfaces in the IGS-1020TF support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-801T
IP30 Slim type 8-Port unmanaged Industrial Gigabit Ethernet
Preis auf Anfrage
  • 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
  Layer 2 Features
  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode
  • High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • 4K absolute MAC address and 16Gbps switching fabric support
  • 1.5Mbits SRAM packet buffer
  • 9K jumbo packet size support
  • IEEE 802.1p CoS support
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  Industrial Case and Installation
  • IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and  
   slave power; 24V AC power support
  • -40 to 75 degrees C operating temperature
    New slim type with more practicability and convenience After entering the Industrial Ethernet market with popular ISW/IFT Fast Ethernet Switch/Converter series, PLANET has released the advanced industrial hardened Gigabit Ethernet Switch series with new slim type, IP-30 metal case. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space. The IGS-801T, one of the new models, is equipped with 8 10/100/1000Mbps auto negotiation ports and operates reliably in heavy industrial demanding environments.   Stable performance under difficult environments The IGS-801T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-801T can be placed in almost any difficult environment. The IGS-801T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The IGS-801T offers high performance switch architecture. With the 8 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 16Gbps and the 8K MAC Address table, the IGS-801T can perform wire-speed packets transfer without risk of packet loss.   The flow control function enables the IGS-801T to provide fast and reliable data transfer. The Gigabit port with 9K Jumbo frame supported can handle extremely large amounts of data transmission in industrial topology that forward data to central control room.   All of the RJ-45 copper interfaces in the IGS-801T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - LWC 10/100/1000 MM SC
Gigabit Medienkonverter 1000Base-SX Multimode, SC, 550m
Preis auf Anfrage
  • Lightwin Gigabit Multimode Konverter
  • Spezielle Lichtquelle mit langer Lebensdauer
  • Externes Netzteil im Lieferumfang
  • Kompatibel mit Lightwin Chassis
  • Übertragung: Multimode
  • Datenrate: 1000Mb/s
  • Wellenlänge: 850nm
  • Distanz: 550m
  • Anschlüsse: 1x Duplex SC, 1x RJ45
  • Modus: Dual Fiber

Lightwin High Quality Multimode Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100/1000Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit der speziell ausgewählten Lichtquelle durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - LWC 10/100/1000 SM20 SC
Gigabit Medienkonverter 1000Base-SX Singlemode, SC, 20KM
Preis auf Anfrage
  • Lightwin Gigabit Singlemode Konverter
  • Spezieller Laser mit langer Lebensdauer
  • Externes Netzteil im Lieferumfang
  • Kompatibel mit Lightwin Chassis
  • Übertragung: Singlemode
  • Datenrate: 1000Mb/s
  • Wellenlänge: 1310nm
  • Distanz: 20km
  • Anschlüsse: 1x Duplex SC, 1x RJ45
  • Modus: Dual Fiber

Lightwin High Quality Singlemode Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100/1000Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit dem speziell ausgewählten Laser durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - LWC 10/100/1000-SFP
Gigabit Medienkonverter 10/100/1000Base-T auf SFP
Preis auf Anfrage
  • Lightwin Gigabit SFP Konverter
  • Externes Netzteil im Lieferumfang
  • Kompatibel mit UNI Coding SFP´s
  • Kompatibel mit Lightwin Chassis
  • Übertragung: Multimode/Singlemode
  • Datenrate: 1000Mb/s
  • Anschlüsse: 1x Gigabit SFP, 1x RJ45

Lightwin SFP Konverter bieten die perfekte Lösung für den Einsatz mit verschiedensten Gigabit SFP Typen wie Multimode, Singlemode, WDM für kurze und lange Distanzen.   Lightwin High Quality SFP Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100/1000Base-T auto-negotation und auto-MDI/MDI-X.   Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - NRAYG-60ADPAIR©
Wireless Wire nRAY NRAYG-60ADPAIR Kit - 2 Gbps bis zu 1500m+ ohne Kabel!
Preis auf Anfrage
  • 2 Gbit over Wireless
  • IEEE 802.11ad WLAN Standard
  • 1500m+ Reichweite
  • 60GHz Frequenzbereich (lizenzfreies Funkband)
  • Gigabit Ethernet
  • vorkonfigurierter Paired-Secure-Link
  • Stromversorgung via IEEE 802.3af/at PoE
  Die kompakteste drahtlose 2-Gbit/s-Gesamtverbindung im Bereich von 1500m oder mehr! Das verbesserte schneebeständige Design ist perfekt für raue Wetterbedingungen. Kabel können Sie nicht mehr einschränken!   MikroTik hat dasFeedback gesammelt und berücksichtigt, um einen würdigen Nachfolger unseres beliebten Wireless Wire Dish zu machen. Jetzt sind wir stolz darauf, die bisher beste Plug-and-Play-Punkt-zu-Punkt-Verbindungslösung mit 60 GHz präsentieren zu können - das Wireless Wire nRAY. Es handelt sich um ein Kit aus zwei vorgepaarten Geräten, die eine sichere AES-verschlüsselte drahtlose Verbindung herstellen.   Es kann problemlos eine Strecke von 1500 Metern zurücklegen und eine faserähnliche Geschwindigkeit erreichen, und wir haben einige ernsthafte strukturelle Verbesserungen vorgenommen. Mit den neuesten Antennentechnologien ist dieses Gerät sehr kompakt, aber noch langlebiger als seine Vorgänger.   Der neue Formfaktor wurde speziell für schneebedeckte Gebiete entwickelt. Sie müssen sich keine Sorgen machen, dass große Schneestücke hängen bleiben und das Signal stören. Aufgrund seiner Größe und Form zieht der nRAY auch weniger unerwünschte Aufmerksamkeit auf sich. Mit den speziellen Feinabstimmungs-Einstellschrauben kann eine perfekte Ausrichtung erreicht werden.   Die 60-GHz-Frequenz wird vom überfüllten Funkspektrum nicht beeinflusst, sodass Sie auch in einer geschäftigen städtischen Umgebung eine reibungslose Verbindung genießen können. Eine leistungsstarke arm64-Dual-Core-CPU mit 1 GHz gewährleistet den Durchsatz der Kabelgeschwindigkeit in nahezu allen Paketgrößen. Die mitgelieferten Geräte sind für die automatische Verbindung vorkonfiguriert. Richten Sie sie einfach aufeinander und schalten Sie sie ein! Wir haben die Netzteile, PoE-Injektoren und eine praktische Präzisionshalterung für eine einfachere Ausrichtung mitgeliefert - den solidMOUNT. Es handelt sich um einen fortschrittlichen Metalladapter für die Mastmontage, mit dem sowohl vertikal als auch horizontal eingestellt werden kann.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Teltonika - OTD140©
Outdoor 4G Cat4 LTE Router, IP55, Dual-SIM, PoE In/Out
Preis auf Anfrage
  • 4G/LTE (Cat 4), 3G, 2G Konnektivität
  • IP55-Pionier: IP55 Widerstandsfähigkeit für den Einsatz im Freien
  • Auto Failover: Dual SIM mit automatischer Ausfallsicherung und anderen Umschaltszenarien
  • PoE-In / Out: 1x PoE-In und 1x PoE-Out

Der OTD140-Router für den Außenbereich verfügt über ein spezielles und robustes IP55-Kunststoffgehäuse und eine integrierte Montagehalterung, wodurch dieser 4G-Router für den Außenbereich einfach zu installieren ist und den Umgebungsbedingungen im Freien standhält. Darüber hinaus ist dieser Outdoor-Router mit LTE Cat 4-Konnektivität, Kompatibilität mit RMS für Remote-Management-Funktionen und zwei PoE-in/out-Ethernet-Ports ausgestattet.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, MikroTik - RBLHGG-60ADKIT
Wireless Wire Dish RBLHGG-60ad Kit - 2 Gbps bis zu 1500m+ ohne Kabel!
Preis auf Anfrage
  • Wireless Wire Dish - RBLHGG-60ADKIT
  • 2 Gbit over Wireless
  • IEEE 802.11ad WLAN Standard
  • 1500m+ Reichweite
  • 60GHz Frequenzbereich (lizenzfreies Funkband)
  • Gigabit Ethernet
  • vorkonfigurierter Paired-Secure-Link
  • Stromversorgung via IEEE 802.3af / at / Passiv PoE, DC-Buchse
  Die drahtlose Drahtschüssel ist eine bahnbrechende Lösung, die Fasergeschwindigkeit und -qualität auf Entfernungen bis zu 1500m zu einem Bruchteil des Preises bietet! Dieses erstaunliche Kit stellt eine sichere AES-verschlüsselte 60-GHz-Funkverbindung her, die nicht vom überfüllten WiFi-Spektrum betroffen ist und eine stabile und schnelle Verbindung für Entfernungen von 1500 Metern oder mehr bietet. Richten Sie die enthaltenen Geräte einfach aufeinander aus und schalten Sie sie ein. Sie sind bereits so vorkonfiguriert, dass sie sich automatisch verbinden und eine 2-Gb/s-Gesamtverbindung herstellen.   Die Box enthält zwei LHGG-60ad-Geräte, die bereits miteinander gekoppelt sind, Netzteile, PoE-Injektoren und Montagekits für beide Geräte.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - RBWAPG-60ADKIT
Wireless Wire RBwAPG-60ad Kit - 1 Gbps Full-Duplex ohne Kabel!
Preis auf Anfrage
  • Wireless Wire - RBWAPG-60ADKIT
  • 1 Gbit over Wireless
  • IEEE 802.11ad WLAN Standard
  • 200m+ Reichweite
  • 60GHz Frequenzbereich
  • Gigabit Ethernet
  • vorkonfigurierter Paired-Secure-Link
  • Stromversorgung via IEEE 802.3af / at / Passiv PoE, DC-Buchse
  Das Wireless Wire ist eine bahnbrechende Lösung, die Glasfaser-Geschwindigkeit und Qualität für einen Bruchteil des Preises bietet. Dieses erstaunliche Kit ersetzt Ihr Gigabit Ethernet Kabel mit zwei kleinen Geräten, die über einen 60GHz Wireless-Link miteinander verbunden sind.   Setzen Sie einfach die mitgelieferten Geräte aneinander und schalten Sie sie ein, es wird eine 1-Gbit-Vollduplex-Verbindung hergestellt, um Ihr Kabel sofort zu ersetzen - deshalb nennen wir das Wireless Wire!   Der Wireless Wire sorgt für eine sichere AES-verschlüsselte 60 GHz Wireless-Verbindung, die nicht vom überfüllten WiFi-Spektrum betroffen ist und eine stabile und schnelle Verbindung für Entfernungen von 100 Metern oder mehr bietet. Die Box enthält zwei WAP60G-Geräte, die bereits zusammen gepaart sind, ein Wandmontagesatz, Riemen für die Polmontage und auch ein Paar Tischständer für die Verwendung der Geräte im Innenbereich. Die Verbindung wird sogar durch die meisten Fenster funktionieren, je nach ihrem Material.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Teltonika - RUT200©
Industrie LTE Router für professionelle Anwendungen, 4G LTE, WiFi, 2x 10/100 Mb
Preis auf Anfrage
  • 4G/LTE (Cat 4), 3G, 2G Konnektivität
  • WiFi - Wireless Access Point mit Hotspot-Funktionalität
  • WAN Failover - Automatischer Wechsel zu einer verfügbaren Backup-Verbindung
  • RMS für Fernverwaltung, Zugang und VPN-Services

Der RUT200 verfügt über die am besten bewerteten Funktionen unseres Bestsellers RUT240 und ist mit Netzwerken in Asien, der GUS, dem Nahen Osten, Afrika und Südamerika kompatibel. Ausgestattet mit 4G LTE, Wi-Fi und zwei Ethernet-Ports ist dieses Modell perfekt für die schnelle Einrichtung von Primär- und Backup-Konnektivität mit Fernverwaltungsfunktionen geeignet. Aufgrund seiner kompakten Größe, seines Industriedesigns und seiner E/As eignet sich dieses Modell sehr gut für Fertigungs-, Automatisierungs-, Transport- und andere industrielle Anwendungsszenarien, die unternehmenskritische Konnektivität unter schwierigen Bedingungen erfordern.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Teltonika - RUT240©
Industrie LTE Router für professionelle Anwendungen
Preis auf Anfrage
  • 4G (LTE) - KAT4 bis zu 70 Mbps
  • 3G - bis zu 42 Mbps
  • 2G - bis zu 236.8 kbps
  • WiFi - bis zu 150 Mbps
  • GPRS
  • Ethernet - 2 Anschlüsse
  • SMS
  Hardware:
  • 2 x SMA für LTE
    • Antennenlänge: 17cm
  • 1 x RP-SMA für WiFi
    • Antennenlänge: 18cm
  • DIN-Schienenmontage (inkl. Seitlicher Montage)
  • 9 - 30 VDC
  • Externer SIM-Halter
  • 1 x WAN
  • 1 x LAN
  • 1 x Eingang
  • 1 x Ausgang
  • WiFi und Mobile LED-Anzeigen
  Software:
  • OpenVPN
  • PPTP
  • L2TP
  • IPSec
  • GRE Tunnel
  • Bootloader WebUI
  • SMS-Steuerung
  • WiFi Hotspot
  • Backup WAN
  • Ping Reboot
  • Webfilter
  • SNMP
  • Konfigurationsprofile
  • Dynamisches DNS
  • Periodischer Neustart
  • Mobile Quota Control
  • NTP
  • RMS kompatibel
  RUT240 ist ein kompakter, kostengünstiger und leistungsstarker LTE-Router für professionelle Anwendungen. Der Router liefert eine hohe Leistung für unternehmenskritische zellulare Kommunikation. Ausgestattet mit externen SIM-Halter- und Signalstärke-Status-LEDs sorgt es für ein einfaches Netzwerkmanagement. Externe Antennenanschlüsse ermöglichen es, gewünschte Antennen anzubringen und die beste Signalposition zu finden.   LTE-Unterstützung: Genießen Sie die LTE Internetverbindung rund um, ob es ein Campingplatz ist, Ihr Zuhause oder Büro, ohne Sorgen - RUT240 hat Sie abgedeckt. Dieser schlanke Router unterstützt High-Speed-LTE KAT4, die Geschwindigkeiten von bis zu 70 Mbps für Ihre Freizeit-oder Geschäftsanforderungen bietet.   Drahtloses Netzwerk: Mit eingebauter WiFi-Konnektivität können Sie sich von einer umständlichen Ethernet-basierten Vor-Ort-Pflege befreien oder einfach nur einige Smartphone-SIM-Daten für Online-Check-ups speichern und E-Mail-Anhänge herunterladen.   Ein- und Ausgang: Mit konfigurierbaren Eingängen können Sie externe Ereignisse überwachen, sei es Wasserspiegel-Grenzübergang oder ein einfacher Türsensor. Empfangen von Warnungen per SMS oder per E-Mail.   Externer SIM-Steckplatz: Mit dem externen SIM-Steckplatz können Sie die SIM-Karte mit relativer Leichtigkeit ein- oder ausschalten und das Gerät wird sofort ohne Neustart an das Netzwerk angeschlossen.   2x Ethernet-Anschluss: Kleine und kompakte Geräte für enge und kompakte Räume mit begrenzten Raum. Wenn einer der Ports frei bleibt, kann er entweder als Haupt-Internetverbindung oder als Backup-Verbindung verwendet werden.   RMS-Unterstützung: Verwalten Sie Ihre Router-Flotte aus der Ferne. Mit voller Unterstützung des zentralisierten Teltonika Remote Management Systems können Sie alle Router innerhalb einer einzigen Plattform aufrufen, steuern und überwachen. Dies wird Ihnen helfen, bessere Entscheidungen für zukünftige Installationen und Best-Use-Praktiken zu treffen.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Teltonika - RUT360©
Industrie LTE Router für professionelle Anwendungen
Preis auf Anfrage
  • 4G (LTE) - Cat 6 bis zu 300 Mbit/s
  • 3G - bis zu 42 Mbit/s
  • WiFi: 802.11 b/g/n, 2x2 MIMO
  • 2 Ethernet Anschlüsse
  • SMS
Hardware:
  • 2x RP-SMA für WLAN
  • 2x SMA für Mobilfunk
  • 1x WAN
  • 1x LAN
  • 1x Digitaler Eingang
  • 1x Digitaler Ausgang
  • WiFi/Mobile LED-Anzeigen
  • Externer SIM-Halter
  • DIN-Schienenmontage (inkl. seitlicher Montage)
Software:
  • WPA3-EAP, WPA3-SAE
  • OpenVPN
  • ZeroTier
  • Wireguard
  • SNMP
  • DDNS
  • Webfilter
  • IPsec
  • Ping Reboot
  • GRE Tunnel
  • PPTP
  • L2TP
  • NTP
  • Mobile Quota Control
  • RMS kompatibel

RUT360 ist eine aktualisierte Version des RUT240. Dieser kompakte industrielle Mobilfunk-Router bietet die Möglichkeit, sich über Mobilfunk-, WLAN- und kabelgebundene Netzwerke mit dem Internet zu verbinden. RUT360 ist mit zwei Ethernet-Schnittstellen, 802.11 b/g/n WiFi und einem 4G LTE Cat 6 Mobilfunkmodul ausgestattet und bietet Datengeschwindigkeiten von bis zu 300 Mbit/s. Einzigartige Programmier-, Fernüberwachungs- und Sicherheitsfunktionen machen RUT360 perfekt für IoT- und M2M-Anwendungen, bei denen eine sichere und zuverlässige Konnektivität ein Muss ist. Die Carrier-Aggregation-Funktionalität macht dieses kompakte Gerät unersetzlich in Bereichen oder Anwendungen, in denen die mobilen Datengeschwindigkeiten begrenzt sind.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-ENTERPRISE-IW
UniFi WiFi 6 Enterprise In-Wall Access Point, 2.4/5/6 GHz, 2.5 GbE, 600+ Clients
Preis auf Anfrage
  • Abdeckung von 116m²
  • 600+ Clients
  • WiFi6E (4x4 MIMO)
  • Stromversorgung über PoE+/PoE++*
  • 4x GbE-Ports mit 1x PoE-Ausgang
  • 2,5-GbE-Uplink

Leistungsstarker, an der Decke montierter WiFi 6E Access Point, der für eine nahtlose Multiband-Abdeckung in Client-Umgebungen mit hoher Dichte ausgelegt ist.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-ENTERPRISE©
UniFi WiFi 6 Enterprise Indoor Access Point, 2.4/5/6 GHz, 2.5 GbE, 600+ Clients
Preis auf Anfrage
  • WiFi 6E-Unterstützung (2,4/5/6-GHz-Bänder)
  • 10,2 Gbit/s aggregierte Durchsatzrate
  • 1x 2,5-GbE-RJ45-Port (PoE+-Eingang)
  • Stromversorgung über PoE+ (Netzteil nicht enhalten)

Leistungsstarker, an der Decke montierter WiFi 6E Access Point, der für eine nahtlose Multiband-Abdeckung in Client-Umgebungen mit hoher Dichte ausgelegt ist.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-IW
UniFi 6 In-Wall Access Point, 802.11a/b/g Wi-Fi 6, 2x2/4x4 MIMO
Preis auf Anfrage
  • WiFi 6-Unterstützung (2,4/5-GHz-Bänder)
  • 5,3 Gbit/s aggregierte Durchsatzrate
  • 1x GbE RJ45-Port (PoE In)
  • 4x GbE RJ45-Ports, 1x mit PoE-Ausgang Support*

Wandmontierter WiFi 6 Access Point mit integriertem PoE-Switch. *PoE+-Eingang erforderlich.
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-LITE
UniFi 6 Lite Indoor Access Point, 802.11a/b/g Wi-Fi 6, 2x2x2 MIMO
Preis auf Anfrage
  • 2x2 hocheffizientes Wi-Fi 6
  • 5 GHz Band 2x2 MU-MIMO und OFDMA mit einer Funkrate von 1,2 Gbit/s
  • 2,4-GHz-Band 2x2 MIMO mit einer Funkrate von 300 Mbit /s
  • Gigabit-Ethernet mit 802.3af PoE
  • Kompatibel mit UAP-nanoHD-Abdeckungen und versenkter Montagehalterung
  • Kein PoE Injektor enthalten

Wi-Fi 6 Access Point mit Dualband 2x2 MIMO in kompaktem Design für flache Montage. UniFi 6 Lite ist ein 2x2 Wi-Fi 6-Zugangspunkt, der eine Funkfrequenz von bis zu 1,5 Gbit / s mit Funkgeräten mit 5 GHz (MU-MIMO und OFDMA) und 2,4 GHz (MIMO) liefert. Montieren Sie UniFi 6 Lite horizontal in der Decke, um eine Umgebung mit hoher Dichte abzudecken, oder montieren Sie es vertikal an der Wand, um die Reichweite zu erhöhen. UniFi 6 Lite verfügt über ein kompaktes und nanoskaliges Design, sodass nanoHD-Abdeckungen und Montagezubehör verwendet werden können.
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-LR
UniFi 6 Long Range Indoor/Semi-Outdoor (IP54) Access Point, Wi-Fi 6, 4x4x4 MIMO
Preis auf Anfrage
  • 1,3-GHz-Dual-Core-Prozessor (jetzt aufgerüstet für Vollduplex-TCP/IP-Leistung mit 1 Gbit/s)
  • Hocheffiziente Wi-Fi 6 Technologie
  • 5-GHz-Band 4x4 MU-MIMO und OFDMA mit einer Funkrate von 2,4 Gbit/s
  • 2,4-GHz-Band 4x4 MIMO mit einer Funkrate von 600 Mbit/s
  • Stromversorgung über 802.3at PoE (PoE-Injektor nicht im Lieferumfang enthalten)

WiFi 6 Access Point der Enterprise-Klasse mit 4X4 MIMO- und OFDMA-Funktionalität. Der UniFi6 Long-Range (U6 LR) ist ein leistungsstarker Access Point, der Unternehmensnetzwerken eine leistungsstarke WiFi 6-Abdeckung mit vier Streams bietet. Der U6 LR kann mit seinen 5 GHz (4x4 MU-MIMO und OFDMA) und 2,4 GHz (4x4 MIMO) Bändern eine aggregierte Durchsatzrate von bis zu 3 Gbit/s erreichen. Es hat auch ein seitlich nach unten geneigtes Antennenmuster, um seinen Abdeckungsbereich zu erweitern. Der wasser- und staubresistente U6 LR kann entweder drinnen oder draußen montiert werden und fügt sich nahtlos in praktisch jede Umgebung ein, sodass Sie nie die Ästhetik Ihres Raums stören müssen, um eine hervorragende drahtlose Abdeckung zu genießen. Der U6 LR vereinfacht den Prozess, WiFi 6 in Unternehmensnetzwerke zu bringen, die eine große Anzahl von Clients unterstützen. Es kann in wenigen Minuten eingerichtet und vollständig mit der UniFi Network-Webanwendung oder der mobilen App verwaltet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-MESH
UniFi WiFi 6 Mesh Indoor/Outdoor Access Point, 4x4 WiFi 6
Preis auf Anfrage
  • Hocheffizientes 4x4 WiFi 6 (802.11ax)
  • 5-GHz-Band (4x4 MU-MIMO und OFDMA) mit einer Durchsatzrate von 4,8 Gbit/s
  • 2,4-GHz-Band (2x2 MIMO) mit einer Durchsatzrate von 573,5
  • Arbeitet mit vollem 4x4 MIMO mit 160 MHz Bandbreite
  • Stromversorgung über 802.3af PoE (PoE-Adapter im Lieferumfang enthalten)

4x4 WiFi 6 Access Point für den Innen- und Außenbereich, der für Mesh-Anwendungen entwickelt wurde. Der Access Point WiFi 6 Mesh (U6 Mesh) ist ein hochleistungsfähiger WiFi 6-Access Point mit vier Streams, der die beste Signalvermaschung seiner Klasse bietet, um die drahtlose Abdeckung von Heim- und Unternehmensnetzwerken zu verbessern. Der U6 Mesh kann mit seinen 5 GHz (4x4 MU-MIMO und OFDMA) und 2,4 GHz (2x2 MIMO) Bändern eine aggregierte Durchsatzrate von bis zu 5,3 Gbit/s erreichen. Dieser Access Point arbeitet auch mit vollem 4x4-MIMO mit 160-MHz-Kanälen, um drahtlose Uplinks mit hoher Kapazität zu erstellen und eine schnellere Datenübertragung zu ermöglichen. Der elegante U6 Mesh ist diskret genug, um es überall in Ihrem Zuhause oder Büro zu inszenieren, aber dank seines IPX5-zertifizierten, wasserdichten Gehäuses auch robust genug, um im Freien zuverlässig zu funktionieren. Der U6 Mesh ist ein Plug-and-Play-Gerät, mit dem Sie Ihr drahtloses Signal einfach erweitern können, um eine vollständige, nahtlose Abdeckung und hochwertige WLAN-Konnektivität zu gewährleisten. Es kann in wenigen Minuten eingerichtet und vollständig mit der UniFi Network-Webanwendung oder der mobilen App verwaltet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-MESH-PRO
UniFi WiFi 6 Mesh Pro Indoor/Outdoor Access Point, 4x4 WiFi 6
Preis auf Anfrage
  • WiFi 6 AP für den Innen- und Außenbereich mit 4 räumlichen Streams, einer integrierten Superantenne und einem Gigabit-Passthrough-Port
  • WiFi 6
  • 4 räumliche Streams
  • 185 m² (2.000 ft²) Abdeckung mit der integrierten omnidirektionalen Superantenne
  • 350+ angeschlossene Geräte
  • Stromversorgung über PoE
  • GbE-Uplink mit 1 GbE-Passthrough-Anschluss
  • Vielseitige Wand- und Mastmontage
  • Wetterfest (für den Außeneinsatz)

Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6-PRO
UniFi WiFi 6 Pro Indoor Access Point, 300 Client-Support, 5.3 Gbps Durchsatzrate
Preis auf Anfrage
  • Dualband-WLAN 6 (802.11ax)
  • 5 GHz (4x4 MU-MIMO) Band mit einer Durchsatzrate von 4,8 Gbit/s
  • 2,4 GHz (2x2 MIMO) Band mit einer Durchsatzrate von 573,5 Mbit/s
  • Arbeitet mit vollem 4x4 MIMO mit 160 MHz Bandbreite
  • 300+ gleichzeitige Client-Kapazität
  • Isolation des Gastverkehrs, die die Sicherheit des drahtlosen Netzwerks verbessert
  • Inklusive Universal-Montageplatte, Trägerplatte und Schraubensatz

Der Access Point WiFi 6 Pro (U6 Pro) ist ein leistungsstarker Dual-Band WiFi 6 Access Point, der sich ideal für den Heim- und Bürogebrauch eignet. Das U6 Pro kann mit seinen 5 GHz (4x4 MIMO) und 2,4 GHz (2x2 MIMO) Bändern eine Gesamtdurchsatzrate von bis zu 5,3 Gbit/s erreichen, wodurch es über 300 gleichzeitig verbundene Clients unterstützt und gleichzeitig ein gleichmäßiges, zuverlässiges Wireless-Erlebnis bietet in Ihrem gesamten Netzwerk. Es kann auch Ihren Gastverkehr isolieren, um optimale Sicherheit und Geschwindigkeit zu gewährleisten. Der U6 Pro arbeitet auch mit vollem 4x4-MIMO mit 160-MHz-Kanälen, um drahtlose Uplinks mit hoher Kapazität zu erstellen und eine schnellere Datenübertragung zu ermöglichen. Es kann in wenigen Minuten eingerichtet und mit der UniFi-Netzwerkanwendung vollständig verwaltet werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - U6PLUS
UniFi WiFi U6+ Indoor Access Point, 300 Client-Support, 2.9 Gbps Durchsatzrate
Preis auf Anfrage
  • Dualband-WLAN 6 (802.11ax)
  • 5 GHz (2x2 MU-MIMO) Band mit einer Durchsatzrate von 2,402 Gbit/s
  • 2,4 GHz (2x2 MU-MIMO) Band mit einer Durchsatzrate von 573,5 Mbit/s
  • Arbeitet mit vollem 2x2 MU-MIMO mit 160 MHz Bandbreite
  • 300+ gleichzeitige Client-Kapazität
  • Isolation des Gastverkehrs, die die Sicherheit des drahtlosen Netzwerks verbessert
  • Inklusive Universal-Montageplatte, Trägerplatte und Schraubensatz

Access Points der Einstiegsklasse für kleine Veranstaltungsorte. PoE-Injektor nicht enthalten!
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten