Standard
- Complies with IEEE 802.3 10Base-T
- Complies with IEEE 802.3u 100Base-TX
- Complies with IEEE 802.3ab 1000Base-T
- Complies with IEEE 802.3z 1000Base-SX / LX
- IEEE 802.3x Full-duplex Flow-Control, Back-Pressure in Half-duplex eliminate packets loss
Interface
- Dual 1000Base-SX / LX SFP Fiber-Optic Slots
- One 10/100/1000Base-T Copper, auto MDI/MDIX function
- Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, Full-duplex for 1000Mbps
- Supports maximum frame size up to 1522 bytes
- IEEE 802.1Q Tag VLAN Transparent, Multicast pass-through
Redundancy
- Link status auto-detecting and redundant on Dual ports with the same connector type
- Allows only the Primary-Port or the Backup-Port active at a time
- When the Primary-Port link fail occurs, the traffic swaps to Backup-Port automatically
- Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port
- Hardware fiber port redundant
Mechanical
- External 5V / 2A DC power supply
- LED indicators for easy network diagnose
- DIP switch for 3-port operation with Gigabit switch mode or redundant mode
- Compact in size, easy installation
- Co-works with PLANET 10”/19” Media Converter Chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
- Wall mounting and DIN-Rail installation supported
PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit SFP slots, strengthened redundant function, and other features shown below:
- DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode
- Hardware Fiber Port Redundant
Highly Convenient and Distance Extendable
The GT-1205A is equipped with one 10/100/1000Base-T port and dual Gigabit SFP slots to support conversion between 10/100/1000Base-T and 1000Base-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m, 10km or longer, depending on the optional 1000Base-SX / LX SFP transceiver modules.
Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode
Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port Redundant Media converter. With the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.
Easy Deployment Standalone or with Chassis
The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function.
Plug & Play Installation
As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature.