• 12 x Gigabit PoE-Ports
• 4 x Gigabit Hi-PoE-Ports
• 2 x Gigabit RJ45 Ports
• 2 x Gigabit Glasfaseranschlüsse.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Ports (max. 90 W PoE-Ausgang).
• IEEE 802.3at/af-Standard für PoE-Ports (max. 30 W PoE-Ausgang).
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab und IEEE 802.3z.
• 6-kV-Überspannungsschutz für PoE-Ports.
• Bis zu 300 m Fernübertragung.
• PoE-Watchdog zum automatischen Erkennen und Neustarten von Kameras, die nicht reagieren.
• Portisolation zur Verbesserung der Netzwerksicherheit.
• Gigabit-Netzwerkzugriffsdesign.
• Weiterleitung mit Drahtgeschwindigkeit.
• Store-and-Forward-Umschaltung.
• Massive hochfeste Metallgehäuse

  DS-3E0520HP-E-Switches sind Layer-2-Hi-PoE-Switches, die fortschrittliche PoE-Stromversorgungstechnologie und Gigabit-Netzwerkdesign auf der Basis eines Hochleistungszugriffs bieten, um einen stabilen Daten-Upload zu gewährleisten. Die Switches unterstützen Hi-PoE, Fernbereich, Portisolation und PoE-Watchdog-Funktion.

• 20 x Gigabit PoE-Ports
• 4 x Gigabit Hi-PoE-Ports
• 2 x Gigabit RJ45 Ports
• 2 x Gigabit Glasfaseranschlüsse.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Ports (max. 90 W PoE-Ausgang).
• IEEE 802.3at/af-Standard für PoE-Ports (max. 30 W PoE-Ausgang).
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab und IEEE 802.3z.
• 6-kV-Überspannungsschutz für PoE-Ports.
• Bis zu 300 m Fernübertragung.
• PoE-Watchdog zum automatischen Erkennen und Neustarten von Kameras, die nicht reagieren.
• Portisolation zur Verbesserung der Netzwerksicherheit.
• Gigabit-Netzwerkzugriffsdesign.
• Weiterleitung mit Drahtgeschwindigkeit.
• Store-and-Forward-Umschaltung.
• Massive hochfeste Metallhülle.

  DS-3E0528HP-E-Switches sind Layer-2-Hi-PoE-Switches, die fortschrittliche PoE-Stromversorgungstechnologie und Gigabit-Netzwerkdesign auf der Grundlage eines Hochleistungszugriffs bieten, um einen stabilen Daten-Upload zu gewährleisten. Die Switches unterstützen Hi-PoE, Fernbereich, Portisolation und PoE-Watchdog-Funktion.
Anwendung:
28-Port 1 Gbps PoE Switch, IEEE 802.3af/at/bt, 370W

• 3 x Gigabit PoE-Ports
• 1 x Gigabit Hi-PoE-Port
• 2 x Gigabit SFP Glasfaseranschlüsse.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Port (max. 60 W PoE-Ausgang).
• IEEE 802.3at/af-Standard für PoE-Ports (max. 30 W PoE-Ausgang).
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z und IEEE 802.3ab.
• 6-kV-Überspannungsschutz für PoE-Ports.
• PoE-Ausgangsleistungsverwaltung.
• Bis zu 300 m Fernübertragung.
• PoE-Watchdog zum automatischen Erkennen und Neustarten von Kameras, die nicht reagieren.
• Portisolation zur Verbesserung der Netzwerksicherheit.
• Design mit größerer Temperatur (-30 bis 65 ° C).
• Weiterleitung mit Drahtgeschwindigkeit.
• Store-and-Forward-Umschaltung.
• Massive hochfeste Metallhülle.
• Zuverlässiges lüfterfreies Design.

  DS-3T0506HP-E/HS-Switches sind Layer-2-Hi-PoE-Switches, die eine fortschrittliche PoE-Stromversorgungstechnologie und ein breiteres Temperaturdesign (-30 bis 65 ° C) auf der Grundlage eines Hochleistungszugriffs bieten, um einen stabilen Daten-Upload zu gewährleisten. Die Switches unterstützen Hi-PoE, Fernbereich, Portisolation und PoE-Watchdog-Funktion.

• 6 x Gigabit-PoE-RJ45-Ports
• 2 x Gigabit-Hi-PoE-RJ45-Ports
• 2 x Gigabit-SFP-Glasfaserports.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Port (max. 90 W PoE-Ausgang).
• IEEE 802.3at/af-Standard für PoE-Ports (max. 30 W PoE-Ausgang).
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z und IEEE 802.3ab.
• 6-kV-Überspannungsschutz für PoE-Ports.
• PoE-Ausgangsleistungsverwaltung.
• Bis zu 300 m Fernübertragung.
• PoE-Watchdog zum automatischen Erkennen und Neustarten von Kameras, die nicht reagieren.
• Portisolation zur Verbesserung der Netzwerksicherheit.
• Design mit größerer Temperatur (-30 bis 65 ° C).
• Weiterleitung mit Drahtgeschwindigkeit.
• Store-and-Forward-Umschaltung.
• Massive hochfeste Metallhülle.
• Zuverlässiges lüfterfreies Design

  DS-3T0510HP-E/HS-Switches sind Layer-2-Hi-PoE-Switches, die eine fortschrittliche PoE-Stromversorgungstechnologie und ein breiteres Temperaturdesign (-30 bis 65°) auf der Grundlage eines Hochleistungszugriffs bieten, um einen stabilen Daten-Upload zu gewährleisten. Die Switches unterstützen Hi-PoE, Fernbereich, Portisolation und PoE-Watchdog-Funktion.

• Fiber optic options for extending distance and electrical noise immunity (EDS-G308 series)
• Redundant dual 12/24/48 VDC power inputs
• Supports jumbo frame transmission up to 9.6 KB
• Relay output warning for power failure and port break alarm
• Broadcast storm protection ››-40 to 75°C operating temperature range (T models)
• CC-Link IE Field certified

• 8x 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/MDI-X supported
• 1x port (Port 8) supports 802.3af/at PoE 48~56V DC in-line power
• 2x 100/1000Base-X mini-GBIC/SFP slots

  PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP Managed Desktop Switch specially designed to build a reliable full Gigabit backbone to transmit and forward data to remote network through fiber optic. It provides 8-port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces with dual power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GSD-1002M provides user-friendly but advanced IPv6 / IPv4 management interface and abundant L2 / L4 switching functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure.    IPv6 / IPv4 Full-functioned Secure Switch The GSD-1002M is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data switching and Quality of Service traffic control, Access Control List, network access control and authentication, and Secure Management features to protect building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.   Spanning Tree Protocol and Dual Power Input for High Available Network System The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop protection and dual power input system (PoE In + 12V DC) into customer’s automation network to enhance system reliability and uptime. In the example below, PoE power has failed with dropped cable and DC power will run hardware failover function automatically to keep powering the switch without any loss.    Handheld Size for FTTD Solution The GSD-1002M provides high-performance edge service and plug-and-play design for FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable and expandable, lower-cost wiring architectures, and long distance capability. The GSD-1002M supports dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be installed in communication closet or major computer room for SMBs.  

• 8x 10/100/1000BASE-T Gigabit RJ45 copper
• 2x 1000BASE-X mini-GBIC SFP interfaces
• 2x 10/100/1000BASE-T TP interfaces

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 32 watts for each PoE port
• Each port supports 54V DC power to PoE powered device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode and 250m in extend mode

  Smart LCD:

• The LCD switch features “Standard”, “VLAN” and  “Extend”  mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• The LCD switch is able to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Power low-voltage, power over-voltage and PSE over-temperature protection
• Screen saver, fan control, factory default and save configuration
• PoE management
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limitation
• PD alive check

  Switching:

• Hardware-based  10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• 9216bytes packet size
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging

  Hardware:

• 12-inch desktop size, 1U height, rack mountable
• 2-inch color LCD with smart management functions
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• 1 silent fan to provide stable and efficient power performance
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
• Supports contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection
• Supports ±6KV surge immunity

• 16-port 10/100/1000BASE-T Gigabit RJ45 copper with 802.3at PoE+ injector function
• 2 1000BASE-X mini-GBIC/SFP slots

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port, all power up to 240W PoE budget.
• Each port supports 52V DC power to PoE powered device
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

  Switching:

• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• 9K jumbo frame supports all speeds (10/100/1000Mbps)
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for Standard, VLAN and Extend mode selection;
• VLAN mode: Ports 1 to 14 cannot communicate with each other, but can communicate with the uplink ports 15 to 16 and SFP ports 17 to 18
• Extend mode: Ports1 to 8 have data rate of 10Mbps. The farthest transmission distance up to 250 meters and all ports can communicate with each other.
• The DIP switch can isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

  Hardware:

• 19-inch desktop size, 1U height
• LED indicators for PoE ready and PoE activity
• Ethernet Link Energy-saving technology
• Link down power savings
• Intelligent use of power based on cable length

• 16x 10/100/1000BASE-T Gigabit RJ45 copper
• 2x 1000BASE-X mini-GBIC SFP interfaces

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 32 watts for each PoE port
• Each port supports 54V DC power to PoE powered device
• 300-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode and 250m in extend mode

  Smart LCD:

• LCD switch mode for "Standard", "VLAN" and "Extend" mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Solid LCD switch mode to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Power low-voltage, power over-voltage and PSE over-temperature protection
• Screen saver, fan control, factory default and save configuration
• PoE management ◦Total PoE power budget control
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limitation
• PD alive check

  Switching:

• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• 9216bytes packet size
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging

  Hardware:

• 19-inch desktop size, 1U height, rack mountable
• 2-inch color LCD with smart management functions
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• 3 silent fans to provide stable and efficient power performance
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
• Supports contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection
• Supports ±6KV surge immunity

• 24xt 10/100/1000BASE-T Gigabit RJ45 copper
• 2x 1000BASE-X mini-GBIC SFP interfaces

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 24 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 32 watts for each PoE port
• Each port supports 54V DC power to PoE Powered Device
• 300-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode and 250m in extend mode

  Smart LCD:

• LCD switch mode for "Standard", "VLAN" and "Extend" mode selection; the "Extend" mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Solid LCD switch mode to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Power low-voltage, power over-voltage and PSE over-temperature protection
• Screen saver, fan control, factory default and save configuration
• PoE management
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limitation
• PD alive check

  Switching:

• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• 9216bytes packet size
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging

  Hardware:

• 19-inch desktop size, 1U height, rack mountable
• 2-inch color LCD with smart management functions
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• 3 silent fans to provide stable and efficient power performance
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
• Supports contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection
• Supports ±6KV surge immunity