• CRS318-16P-2S+OUT - netPower 16P
• 16x 10/100/100 Ethernet Ports
• 2x SFP+-Ports
• IEEE 802.3 af/at PoE
• MicroTik SwOS oder Router OS

  Es war noch nie einfacher, eine Reihe von Access Points oder IP-Kameras und einige Uplinks auf einem Tower mit Strom zu versorgen. netPower 16P verfügt über 16 Gigabit-Ethernet-Ports mit PoE-Ausgang und zwei SFP+ -Ports für 10G-Glasfaser-Uplinks.   Dank seines robusten und kompakten Außengehäuses kann der Schalter in allen Umgebungen montiert werden - von feuchten Dachböden und Schächten bis zu Türmen, Masten und Masten mit Schlauchschellen.   netPower 16P hat einen nicht blockierenden Durchsatz von 36 Gbit/s, eine Vermittlungskapazität von 72 Gbit/s und eine Weiterleitungsrate von 53,6 Mpps.   Das Netzteil ist NICHT im Lieferumfang enthalten. Sie können gerne Ihre bevorzugte Stromversorgungsoption wie Akku usw. verwenden. Kompatibel auch mit MikroTik-Netzteilen 24HPOW, 48POW und 48V2A96W

• 16x 10/100/1000BASE-T Gigabit RJ45 copper ports with 16-port IEEE 802.3af/at/bt Ultra PoE injector
• 2x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• RJ45 console interface for switch basic management and setup

  Power over Ethernet:

• Complies with IEEE 802.3at Power over Ethernet Plus, end-span/mid-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 16 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt ultra PoE devices powered
• Supports PoE power up to 75 watts for each ultra PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management
• Total PoE power budget control- Per port PoE function enable/disable
• PoE admin-mode control- PoE port power feeding priority- Per PoE port power limitation
• PD classification detection
• Temperature threshold control
• PD alive check
• PoE schedule

  Layer 2 Features:

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
• Broadcast/Multicast/Unknown unicast
• Supports VLAN
• IEEE 802.1Q tagged VLAN
• Up to 255 VLANs groups, out of 4094 VLAN Ids
• Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
• Private VLAN Edge (PVE)
• Protocol-based VLAN
• MAC-based VLAN
• Voice VLAN
• Supports Spanning Tree Protocol
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
• BPDU Guard
• Supports Link Aggregation
• 802.3ad Link Aggregation Control Protocol (LACP)
• Cisco ether-channel (static trunk)
• Maximum 9 trunk groups, up to 2 ports per trunk group
• Up to 40Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops

  Layer 3 Features:

• IP interfaces (Max. 8 VLAN interfaces)
• Routing table (Max. 32 routing entries)
• Routing Protocols (IPv4/IPv6 software static routing)

  Quality of Service:

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
• IEEE 802.1p CoS
• TOS/DSCP/IP precedence of IPv4/IPv6 packets
• IP TCP/UDP port number
• Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking

  Multicast:

• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Multicast VLAN Registration (MVR) support

  Security:

• Authentication
• IEEE 802.1x port-based/MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• Access Control List
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter untrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder

  Management:

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Console/Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c, and v3 switch management
• SSH/SSL secure access
• 2.4-inch color LCD touch screen
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP/TFTP
• Reset button for system reboot or reset to factory default
• Dual images
• DHCP Relay
• DHCP Option 82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
• ICMPv6/ICMPv4 remote ping
• Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Link Up and Link Down notification
• System Log
• PLANET Smart Discovery Utility for deployment management
• Smart fan with speed control

  Redundant Power System (GS-5220-16UP2XVR):

• Redundant 100~240V AC/36-60V DC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience

• Layer-3-Etherlighting™-Switch mit 24 Ports 
• Etherlighting™-Ports, die zur Anzeige von Portposition, Geschwindigkeit/Link und nativem VLAN/Netzwerk leuchten*
• 8x 2,5 GbE
• 16x GbE-Anschlüsse
• 2x 10G SFP+-Anschlüsse
• DC Power Backup ready
• Verwaltet mit UniFi Network 8.0.24 und höher

*in Kombination mit UniFi Etherlighting Patch-Kabeln für optimale Helligkeit.