• 5 x 10/100 Mbps adaptive Ethernet ports
• Support ADI/ADIX
• Store-and-forward switching
• Support MAC address auto-learning and aging
• Simple and mini exquisite body
• Support desktop and wall-mounting
• Plug & play, and easy to use

  DS 3E0105D E provides 5 x 10/100 Mbps Ethernet ports which support line speed forwarding. With simple and mini exquisite body, the switch is plug and play and easy to use, suitable for home, school, dormitory, office, small monitoring and other simple network environments.

• 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors)
• IEEE802.3/802.3u/802.3x support
• Broadcast storm protection
• DIN-rail mounting ability
• -10 to 60°C operating temperature range

  Introduction: The EDS-205/208 series of industrial Ethernet switches are entrylevel industrial 5 and 8-port Ethernet switches that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDIX autosensing RJ45 ports. The EDS-205/208 switches are rated to operate at temperatures ranging from -10 to 60°C, and are rugged enough for any harsh industrial environment. The switches can be easily installed on a DIN-rail as well as in distribution boxes. The DIN-rail mounting capability, wide operating temperature, and the IP30 housing with LED indicators make the plug-and-play EDS-205/208 switches easy to use and reliable.

• 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/singlemode, SC or ST connector)
• Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
• IP30 aluminum housing
• Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), Transportation (NEMA TS2/ EN50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK)
• -40 to 75°C operating temperature range (T models)

• Relay output warning for power failure and port break alarm
• Broadcast storm protection
• Transparent transmission of VLAN tagged packets
• -40 to 75°C operating temperature range (T models)

• 5x 10/100Mbps Fast Ethernet ports
• Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX Ethernet standards
• Supports auto MDI/MDI-X function
• Hardware-based 10/100Mbps, half / full duplex , flow control and auto-negotiation
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Integrated address look-up engine, supporting 2K absolute MAC addresses
• Handles up to 1536bytes packet

  High-speed 10/100Mbps Workgroup Switch PLANET Fast Ethernet Switch FSD-503 provides business and home users with a cost-effective integrated system of small-office / home-office networking. It is with compact-sized metal case design and just right for the network of 10 to 50 users.   Stable Fast Ethernet Switch Performance The FSD-503 also supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity. The high performance throughput (filtering / forwarding rate: 14,880 packets per second in 10Mbps, and 148,800 packets per second in 100Mbps) and built-in packet buffer help the FSD-503 to boost bandwidth, eliminate unnecessary traffic, and relieve congestion on your critical server path. With an intelligent address recognition algorithm, the FSD-503 could recognize up to a 2K different MAC addresses and provide 1Gbps switching capacity, which makes the FSD-503 the best in wire-speed packet transfer performance without risk of packet loss.   Flexible Desktop Size Design The FSD-503 is a fancy-shaped standard metal model that nicely fits in a space-limited environment. With concepts of "easy to install and use", "compact sized design", and "simple troubleshooting", the FSD-503 provides cost-conscious business and home users with a flexible yet cost-effective SOHO / Home networking.    Power Energy Saving With one power ON/OFF button designed on the rear panel of the FSD-503, it can help users to reduce unnecessary power energy loss while the FSD-503 operation is OFF.   Plug & Play and Easy Installation All RJ-45 copper interfaces in the FSD-503 support 10/100Mbps auto-negotiation for optimal speed detection through RJ-45 Category 5/5e cables. Supporting standard for auto-MDI/MDI-X can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables. The Flow Control function allows the FSD-503 to support routers and servers for direct connection to this switch with fast and reliable data transfer.

• 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

  Layer 2 Features:

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex mode
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Complies with IEEE 802.3az Energy Efficient Ethernet (EEE)
• IEEE 802.1p CoS
• Supports 1K MAC address
• Automatic address learning and address aging

  Industrial Case and Installation:

• IP30 metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse protect function
• 24V AC power input acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries

• 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

  Layer 2 Features

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex mode
• High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Backplane (switching fabric): 1Gbps
• Integrated address look-up engine, supporting 1K absolute MAC addresses
• Automatic address learning and address aging

  Industrial Case & Installation

• IP30-rated metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse protection function and connective removable terminal block for master and slave power, 24V AC power support
• Lower Power Consumption device in full load operation mode
• Supports EFT protection for 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries

  Slim type with more practicability and convenience After PLANET ISW/IFT Fast Ethernet Switch/Converter series become popular, PLANET has released the advanced industrial hardened Fast Ethernet Switch series with slim type, IP30 metal case. The compact, IP30 standard metal case allows either DIN rail or wall mounting to have the efficient use of cabinet space. The ISW-501T, one of the new models, is equipped with five 10/100Mbps auto negotiation ports and operates reliably in heavy industrial demanding environments.   Stable operating performance under difficult environments The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust switch performance The ISW-501T offers high performance switch architecture. With the five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special-through or crossover cables.  

• 5-Port 10/100Mbps RJ-45 with aouto MDI/MDI-X function
• 4-Port support 48V DC power to PoE Powered Device (Port-1 to Port-4)

  IEEE 802.3af PoE

• Complies with IEEE 802.3af Power over Ethernet End-Span PSE
• Up to 4 IEEE 802.3af devices powered
• Supports PoE Power up to 15.4 Watts for each PoE port
• Auto detect powered device (PD)
• Circuit protection prevent power interference between ports
• Remote power feeding up to 100m

  Layer 2 Features  

• Supports Auto-Negotiation and 10/100Mbps Half / Full Duplex and Auto MDI/MDI-X
• High performance Store and Forward architecture, runt / CRC filtering eliminates 　　 
• erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame
• flow control (Full-Duplex)
• Automatic address learning and address aging
• Integrated address look-up engine, support 2K absolute MAC addresses
• CSMA / CD Protocol
• Industrial Case / Installation

IP-30 Aluminum metal case protection

• DIN Rail and Wall Mount Design
• Redundant Power Design
• 24V or 48V DC, redundant power with polarity reverse protect function
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 Degree C operation temperature 

  The PLANET ISW-504PT PoE Industrial Ethernet Switch is designed to transmit power and data over single Ethernet cable to remote PoE capable devices and operates reliably in heavy industrial demanding environments. The ISW-504PT provides 5 10/100Mbps copper ports with 4-Port IEEE 802.3af Power over Ethernet inject interfaces delivered in an IP-30 rugged strong case. Supporting up to 15.4Watts power per port for any remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN access point, the ISW-504PT is an ideal solution to deploy surveillance system and wireless service in climatically demanding wide temperature range(-40 to 75 Degree C)environments.   IEEE 802.3af Power over Ethernet PSE Industrial Switch   PoE feature is more often supported in the industrial Ethernet devices for efficient operation in harsh environments. The ISW-504PT in-line power follows standard IEEE 802.3af and allows giving power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With Data and Power over Ethernet from one unit, the ISW-504PT shall reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and (power lowering), the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords.Furthermore, there is only 24V DC input in some industrial environments, the ISW-504PT series supports 24V DC or 48V DC dual voltages input and able to provide more wide range of industrial IEEE 802.3af PoE applications.   Wide Temperature conquers installation in harsh environments The ISW-504PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 Degree C, the ISW-504PT can be placed in almost any difficult environment. It also offers dual-redundant, reversible polarity 24V DC or 48V DC power inputs for high availability applications requiring backup power inputs.     Robust Switch performance The ISW-504PT offers high performance switch architecture with 5 10/100Mbps UTP ports. It provides non-blocking switch fabric, wire-speed throughput as high as 1Gbps and the 2K MAC Address table. It also performs wire-speed packets transfer without risk of packet loss and the Flow Control function is default enabled to provide fast and reliable data transfer. All of the RJ-45 copper interfaces support 10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 3, 4, 5, 5e or 6 cable. The standard Auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

• 5x 10/100 Base-T Ports
• 1 Gbps Backplane Bandbreite
• 0.744 Mpps Packet Forwarding Rate
• Lüfterlos

Die perfekte Kombination aus Qualität, Benutzerfreundlichkeit und Kosteneffizienz Ruijie Real-easy Series Plastic Switch ist ein Desktop-Switch, der auf kleine Unternehmen, kleine Überwachungsanlagen und SOHO zugeschnitten ist. Er besteht aus insgesamt 4 verschiedenen Modellen, die den Netzwerkanforderungen kleiner Unternehmen gerecht werden. Die Switches zeichnen sich durch Plug-and-Play, Null-Konfiguration und Kompatibilität mit einer Vielzahl von Endgeräten wie Netzwerkkameras, Druckern, PCs usw. aus, um eine schnelle Bereitstellung zu ermöglichen.

• 5 10/100Mbps TP interfaces
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Supports 2K absolute MAC address
• Automatic address learning and address aging
• Supports Automatic MDI/MDI-X function
• Full/half-duplex capability on each TX port
• LED indicators for simple diagnostics and management
• FCC Class B, CE compliant

  With concepts of "Easy to install and use", "Compact-sized design", and "Simple troubleshooting", PLANET SW-504 provides cost-conscious business and home users with the foundation of an integrated system of small-office / home-office networking. The SW-504 is a fancy-shaped plastic model, which is just right for your network of 10 to 50 users.   The SW-504 Desktop Fast Ethernet Switch is simple and cost-effective, and offers highly reliable network . And it is the ideal device for bridging Ethernet and Fast Ethernet workgroups or networks. Therefore, PLANET SW-504 switch will be recognized as one of the most important building blocks for today’s networking technology.   To segment the network and ease the network traffic, the 5-port 10/100Mbps is useful for the SOHO switched networks as the friendly network backbone. With LED indicators, the network status can be monitored at a glance.