SHOP

Aktive Komponenten PoE - Power over Ethernet

(4 Treffer)
PoE - Power over Ethernet
Hersteller
PLANETPLANET
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
PoE
--IEEE 802.3 afIEEE 802.3 afIEEE 802.3 af/atIEEE 802.3 af/atIEEE 802.3 af/at, Passiv-PoEIEEE 802.3 af/at, Passiv-PoEIEEE 802.3 af/at/btIEEE 802.3 af/at/btIEEE 802.3 af/btIEEE 802.3 af/btIEEE 802.3 atIEEE 802.3 atIEEE 802.3 at/btIEEE 802.3 at/btIEEE 802.3 btIEEE 802.3 btPassiv-PoEPassiv-PoE
1GBit Ports, PoE
11121216162224242626444848558899
1GBit Ports
11101016161818222 (Combo)2 (Combo)20202424282844484855668899
1GBit/SFP Kombi Ports
112244
SFP Ports
--11222 (Combo)2 (Combo)444 (Combo)4 (Combo)
SFP 100/1000Mbps Ports
11222 (Combo)2 (Combo)444 (Combo)4 (Combo)55
SFP+ Ports
11222 (Combo)2 (Combo)444 (Combo)4 (Combo)
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, PLANET - FGSD-1008HPS
8-Port 10/100TX 802.3at HP POE + 2Port Gbit combo Web Smart
Preis auf Anfrage
  • 8-port 10/100BASE-TX RJ45 copper with PoE in-line supported
  • 2-port 10/100/1000BASE-T RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots to share with Port-9 to Port-10
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 8 IEEE 802.3at / 802.3af devices powered
  • 125 watts PoE budget
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN
- IEEE 802.1Q tag-based VLAN, up to 30 VLANs groups, out of 4094 VLAN IDs - Port-based VLAN, up to 10 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 3 trunk / LACP groups, up to 4 ports per trunk / LACP group
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port, many-to-1
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • Ingress / Egress Rate Limit per port bandwidth control
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 / v2c switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Configuration upload/download through HTTP
  • Hardware reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility
   Ideal Cost-effective Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSD-1008HPS 802.3at PoE Web Smart Switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSD-1008HPS provides cost-effective, non-blocking wire-speed performance and intelligent PoE functions along with 8 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces, supporting high-speed transmission of surveillance images and videos.    Perfectly-integrated Solution for PoE IP Camera and NVR System Being different from the general IT industry PoE switch which usually contains 12 or 24 PoE ports, the FGSD-1008HPS provides eight 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 5.6Gbps high-performance switch architecture and 125-watt PoE power budget, the recorded video files from the 8 PoE IP cameras can be powered by the FGSD-1008HPS and saved in the 8-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSD-1008HPS can be combined with one 8-channel NVR and 8 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSD-1008HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSD-1008HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.    Robust Layer 2 Features The FGSD-1008HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSD-1008HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 30. Via aggregation of supporting ports, the FGSD-1008HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.    Flexible and Extendable Uplink Solution The FGSD-1008HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-1816HPS
16-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Physical Port
  • 16-port 10/100Base-TX RJ-45 copper with PoE in-line supported
  • 2-port 10/100/1000Base-T RJ-45 copper
  • 2 1000Base-X mini-GBIC/SFP slots to share with Port-17 to Port-18
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 16 IEEE 802.3at / 802.3af devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential - PoE schedule   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN:
- IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs - Port-based VLAN, up to 16 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (Static Trunk)
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1d Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (Many-to-1)
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Hardware reset button for system reboot or reset to factory default
  Ideal Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSW-1816HPS 802.3at PoE web smart switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSW-1816HPS provides intelligent PoE functions along with 16 10/100Base-TX ports featuring 30-watt 802.3at PoE+ with RJ-45 copper interfaces and 2 Gigabit TP/SFP combo interfaces supporting high-speed transmission of surveillance images and videos.    Perfectly- integrated Solution for PoE IP Camera and NVR System Being different from the general IT industrial PoE switch which usually contains 12 or 24 PoE ports, the FGSW-1816HPS provides 16 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 7.2Gbps high-performance switch architecture and 220-watt PoE power budget, the recorded video files from 16 PoE IP cameras can be powered by the FGSW-1816HPS and saved in the 8 / 16 / 32-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSW-1816HPS can be combined with one 16-channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSW-1816HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSW-1816HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 50W, 100W, 150W and 190W of PoE power usage.    PoE Schedule for Energy Saving Besides being used as an IP Surveillance, the FGSW-1816HPS is certainly applicable to constructing any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the FGSW-1816HPS can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function is for you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.    Robust Layer 2 Features The FGSW-1816HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-1816HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 32. Via aggregation of supporting ports, the FGSW-1816HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.   Flexible and Extendable Uplink Solution The FGSW-1816HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ-45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-2624HPS(4)
24-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Physical Port
  • 24-port 10/100BASE-TX RJ45 copper with 24-port IEEE 802.3at/af PoE injector
  • 2-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
  • Reset button for system management
  Power over Ethernet
  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 24 IEEE 802.3at / 802.3af devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Power Usage
  • PoE Management
    • Per port PoE function enable/disable
    • PoE Port Power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • PoE power sequential
  Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs
    • Port-based VLAN, up to 26 VLAN groups
    • MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1d Spanning Tree Protocol
    • RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (Many-to-1)
  Quality of Service
  • 2 priority queues on all switch ports
  • Traffic classification
    • Port-based priority
    • IEEE 802.1p-based priority
    • IP TOS / DSCP-based priority
    • TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2 (excluding IGMP Query feature)
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Management
  • Switch Management Interfaces
    • Web switch management
    • SNMP v1 switch management
  • Firmware upload/download via HTTP
  • Hardware reset button for system reboot or resetting to factory default
   Cost-effective PoE+ Managed Switch for Small and Medium Networking Particularly designed for the growing popular IP surveillance applications, PLANET FGSW-2624HPS / FGSW-2624HPS4 802.3at PoE web smart switch is a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSW-2624HPS / FGSW-2624HPS4 provides PoE functions along with 24 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces supporting high-speed transmission of surveillance images and videos. With a total power budget of up to 220 watts and 420 watts for different kinds of PoE applications, respectively, the FGSW-2624HPS and FGSW-2624HPS4 provide a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Centralized Power Management for Security and Public Service PoE Applications To fulfill the needs of the high power consumption of PoE network applications, the FGSW-2624HPS / FGSW-2624HPS4 features the standard IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 30 watts of power output and data per port over one cat5E/6 Ethernet cable. It is designed specifically to meet the demand of the high power consumption of network PDs (powered devices) such as IR, PTZ, speed dome cameras; and even box-type IP cameras with built-in fan and heater. Compliant with both 802.3at and 802.3af standards, the series allows more flexibility in power requirement for a variety of PDs, making installation costs affordable.    Intelligent LED Indicator for Real-time PoE Usage The FGSW-2624HPS / FGSW-2624HPS4 helps users to monitor the current status of PoE power usage easily and efficiently with its advanced LED indication. Called “PoE Power Usage” found on the front panel of the FGSW-2624HPS / FGSW-2624HPS4 Fast Ethernet PoE+ Switch, it has four orange LEDs indicating the range of the current PoE power usage.    Robust Layer 2 Features The FGSW-2624HPS / FGSW-2624HPS4 can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-2624HPS / FGSW-2624HPS4 provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 32. Via aggregation of supporting ports, the FGSW-2624HPS / FGSW-2624HPS4 allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.    Remote and Centralized Management For catering to the need of easy management and centralized SNMP application to monitor the status of the switch and traffic per port, the FGSW-2624HPS / FGSW-2624HPS4 provides friendly Web management interface for efficient network operation. With its built-in Web-based management, the FGSW-2624HPS / FGSW-2624HPS4 offers an easy-to-use, platform-independent management and configuration facility. It also supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software.    Flexible and Extendable Uplink Solution The FGSW-2624HPS / FGSW-2624HPS4 provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to 10/20/30/40/50/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGUP-2205AT
IP30 Industrial 2Port 100/1000X SFP to 2Port 1Gbit 802.3bt PoE++ Media Converter
Preis auf Anfrage
  • 2x 10/100/1000BASE-T RJ45 with IEEE 802.3bt PoE Injector function
  • 2x SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver dual mode 
Power over Ethernet:
  • Complies with IEEE 802.3af/at/bt PoE Plus end-span PSE
  • 1 IEEE 802.3af/at/bt device powered
  • Supports PoE Power up to 95 watts for each PoE port
  • Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port
  • Auto-detects IEEE 802.3bt equipment and protects devices from being damaged by incorrect installation
  • Remote power feeding up to 100m
  • IEEE 802.3af/at/bt splitter devices compatible 
Layer 2 Features:
  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode on RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) 
Hardware:
  • LED Indicators
    • System: Power 1, Power 2, Fault and PoE usage 
    • Fiber port: LNK/ACT
    • 10/100/1000BASE-T port: LNK/ACT, PoE-in-use
  • DIP switch: Standard/Legacy mode selection 
Industrial Case and Installation:
  • IP30 metal case 
  • DIN-rail and wall-mount designs
  • 12 ~ 56V DC redundant power with reverse polarity protection and connective removable terminal block for master and slave power
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature 

PLANET IGUP-2205AT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3bt Power over Ethernet Plus Plus (PoE++) injector function to deliver both ports up to 190 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGUP-2205AT supports dual 12~56V DC power inputs for power redundancy and operational flexibility.  Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGUP-2205AT can be placed in almost any difficult environment. Fiber-optic Link Capability Extends the Range of Network Deployment:
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGUP-2205AT is integrated with fiber interface for farther distance applications. The IGUP-2205AT’s fiber connector type is as follows:  Two SFP slots supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP module) With the long fiber distance support, the IGUP-2205AT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage.  Plug and Play High Power Sourcing Solution:
Complying with the IEEE 802.3bt Power over Ethernet Plus technology, the IGUP-2205AT provides up to 95 watts of PoE output power, tripling that of the earlier 802.3at. Through, the Legacy function in the DIP switch design, it is also backward compatible with 802.3af/at PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGUP-2205AT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.  Convenient and Reliable Power System:
To facilitate the 802.3bt power PoE++ usage with the commonly-used 12~48V DC power input for transportation and industrial-level applications, the IGUP-2205AT adopts the 12~48V DC to 56V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs. Environmentally Hardened Design for Industrial PoE Networks:
The IGUP-2205AT is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. The IGUP-2205AT is packaged in a compact, IP30 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGUP-2205AT is ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location. 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /