• ±48 V DC telecom Open Frame Power supply
• 12V 8 A output
• available to purchase separately for use with new “r2” revision of Cloud Core Routers.
• Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations.

• Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
• Non-standard baudrates supported with high precision
• Automatic RS-485 data direction control with Moxa’s patented ADDC®
• Enhanced remote configuration with HTTPS and SSH
• Port buffers for storing serial data when the Ethernet is off-line
• Supports IPv6
• Generic serial commands supported in Command-by-Command mode

• Compatible with USB 2.0
• 12 Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows, WinCE, and Linux
• Mini DB9 female to terminal block adapter for easy wiring
• LEDs for indicating USB and TxD/RxD activity
• 2 kV electrical isolation (UPort 1130I and 1150I)

   

• Complies with IEEE 802.3, IEEE 802.3u 10 / 100Base-TX and 100Base-FX
• IEEE 802.3x full-duplex flow-control, back-pressure in Half-duplex eliminate packet loss
• TS-1000 / OAM function built-in, the device can be remotely monitored with port link status
• Dual 100Base-FX SFP fiber optic
• One 10 / 100Base-TX copper
• Auto-negotiation for 100Base-TX half-duplex or 100Base-T full-duplex
• Supports auto MDI / MDI-X function
• Supports maximum frame size up to 2046Kbytes
• Link status auto-detect and redundant on dual ports with the same connector type
• Only primary port is active at a time, the backup port is blocked
• While primary port link fail occurrences, the traffic will swap to backup port automatically
• Once the primary port status is back to linkup, the traffic will swap from backup port to primary port
• Hardware redundant swaps less than 10 ms

  PLANET FT-1205A is a 3-port Redundant Media Converter which supports conversion between 10 / 100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter. It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecoms, hospitals, banks and enterprises.   Via the built-in DIP switches, the converter can be configured as 3-port Ethernet switch or 2-port redundant media converter. With the 3-port switch mode, it can operate Store-and-Forward mechanism with high performance, and it can also prevent packet loss via IEEE 802.3x flow control (full-duplex) and back pressure (half-duplex).   With the 2-port redundant mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.   The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The FT-1205A is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. It depends on the 100Base-FX SFP transceiver modules. The Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively.   The converters can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700, MC-1500, MC-1500R and MC-1500R48. As to the other PLANET media converters (FT series), they're hot swappable in MC chassis.

• 10 Gigabit Übertragung über Singlemode
• Industrial Grade -40°C bis +85°C
• DDM Technologie
• Spezieller Chip eingebaut
• Spezieller Laser mit langer Lebensdauer
• Lebenslange Garantie bei ordentlicher Handhabung und korrekter Installation!

• Übertragung: Singlemode
• Datenrate: 10Gb/s
• Wellenlänge
• TX: 1310nm
• RX: 1260 - 1355nm
• Distanz: 10km
• Stecker: LC

Lightwin High Quality Singlemode SFP+ mit lebenslanger Garantie und wichtigen Vorteilen im Vergleich zu alternativen no name Modulen.   Lightwin SFP+ haben einen speziellen Chip verbaut und überzeugen in Kombination mit dem speziell ausgewählten Laser durch deutlich längere Lebensdauer. Alle Lightwin SFP+ Modelle unterstützen die DDM Technologie und haben einen erweiterten Temperaturbereich für Industrial Grade Anwendungen.  

• 10 Gigabit Übertragung über Multimode
• Industrial Grade -40°C bis +85°C
• DDM Technologie
• Spezieller Chip eingebaut
• Spezieller Laser mit langer Lebensdauer
• Lebenslange Garantie bei ordentlicher Handhabung und korrekter Installation!

• Übertragung: Multimode
• Datenrate: 10Gb/s
• Wellenlänge
• TX: 850nm
• Distanz: 300m OM3
• Distanz: 400m OM4
• Stecker: LC

Lightwin High Quality Singlemode SFP+ mit lebenslanger Garantie und wichtigen Vorteilen im Vergleich zu alternativen no name Modulen.   Lightwin SFP+ haben einen speziellen Chip verbaut und überzeugen in Kombination mit dem speziell ausgewählten Laser durch deutlich längere Lebensdauer. Alle Lightwin SFP+ Modelle unterstützen die DDM Technologie und haben einen erweiterten Temperaturbereich für Industrial Grade Anwendungen.  

• Unternehmen, Gastgewerbe, Fabriken, Bildungswesen, Einzelhandel usw.
• 10-Port Gigabit Layer 2 managed PoE Switch, 2 SFP Uplink
• Qualität der Unternehmensklasse garantiert hohe Leistung
• IP-Kamera-Erkennung, einzigartiger Wert für CCTV-Netzwerke
• Mehrere Sicherheitsrichtlinien schützen Ihr Netzwerk
• Lifetime-Management über Ruijie Cloud jederzeit und überall

• 10-Port Gigabit Managed Switch mit 8 PoE+ Ports, 1 Combo Port
• Kosteneffiziente Smart Cloud Managed Switches 
• IP-Kamera-Erkennung, einzigartiger Wert für CCTV-Netzwerke 
• Automatische Loop-Prävention gewährleistet Servicekontinuität 
• Lifetime-Management in der Ruijie Cloud jederzeit und überall 

• Unternehmen, Hotels, Fabriken, Bildungseinrichtungen, Einzelhandel, etc.
• 2.5 Gbit/s-Ports durchbrechen die Gigabit-Grenze und erschließen das volle Potenzial von WiFi 6 APs.
• 802.3bt/at/af-konforme PoE++ Ports mit einer Gesamtleistung von 370W.
• IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, Radius Authentication.
• Lifetime Management über Ruijie Cloud jederzeit und überall.

• ITU-T G.993.5 G.vectoring and G.INP
• DMT-based coding technology
• Built-in POST splitter to share voice and date
• CO/CPE mode selectable via DIP switch
• Selectable target band plan and SNR margin
• Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
• 1 10/100/1000BASE-TX LAN ports
• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
• Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
• One RJ11 connector for VDSL port with VDSL connection
• Voice and data communication can be shared simultaneously based on the existing telephone wire
• Supports a packet size of up to 9K bytes, IEEE 802.1Q VLAN tag transparency
• VDSL2 standalone transceiver for simple bridge modem application
• Advantage of minimum installation time (Simply by Plug-and-Play)
• Supports extensive LED indicators for network diagnosis
• Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
• Compact in size and easy to install

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature 　–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 　–Supports auto MDI/MDI-X function 　–Store-and-Forward mechanism 　–Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: 　–Multi-mode fiber using SC/LC/WDM connector; 　–Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base 　SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and 100BASE-FX Ethernet standards
• One 10/100BASE-TX port with RJ45 connector
• One 100BASE-FX port with ST/SC/WDM connector supporting multi-mode or single-mode fiber optic cable
• Auto-negotiation and auto-MDI / MDI-X for 10/100BASE-TX port
• Back-pressure and IEEE 802.3x compliant flow control and full wire-speed forwarding rate
• Link Loss Return (LLR) switch on each fiber optic is to aid in troubleshooting remote network connections
• Link Loss Carry Forward (LLCF) works with LLR in diagnosing network connections

  Distance Extended with Fiber Optic Cable PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.    Enhanced Smart Management Features The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.    Easy Installation The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.

• 100-Gigabit Ethernet Verbindungen
• QSFP28 Direct Attach Kabel
• 1m oder 3m Kabellänge
• niedriger Stromverbrauch
• geringe Latenzen

Verbinden Sie problemlos zwei beliebige MikroTik 100-Gigabit-Helden (CCR2216 und CRS504) - dieses Kabel verfügt über integrierte QSFP28-Module. Einfach einstecken und die Geschwindigkeit genießen! Das Kabel ist einen Meter lang, was für die meisten Setups ausreichen sollte, es ist aber auch eine 3-Meter-Version erhältlich. Es ist ziemlich flexibel – Sie können Ihre Geräte getrennt oder übereinander halten

- Kosteneffiziente VDSL2 Profil 17a/30a CO / CPE Brückenlösung
nur kompatibel mit VC-201A/204/231 und 234 - Ein-Gehäuse-Design, CO / CPE wählbar über DIP-Schalter
- Definiert einen symmetrischen Bandplan für die Übertragung von Upstream- und Downstream-Signalen
- Entspricht IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX und IEEE 802.3x, Flow control Ethernet
　Normen
- DMT (Diskreter Mehrton) Leitungscodierung
- Halbduplex-Rückdruck und IEEE 802.3x-Vollduplex-Pausenrahmen-Flusskontrolle
- Ein RJ-11-Anschluss für VDSL-Port mit VDSL-Anschluss, zusätzlicher Splitter für POST-Anschluss
- Sprach- und Datenkommunikation können gleichzeitig auf Basis der vorhandenen Telefonleitung genutzt werden
- Ein 10/100Mbps RJ-45 Anschluss, Auto-Negotiation und Auto-MDI/MDI-X
- Unterstützt bis zu 1536 Bytes Paketgröße, IEEE 802.1Q VLAN Tag transparent
- VDSL2 Stand-Alone-Transceiver für einfache Bridge-Modem-Anwendung
- Vorteil der minimalen Installationszeit (einfach als Plug-and-Play)
- Wählbares Zielprofil und Ziel-SNR-Marge
- Unterstützt umfangreiche LED-Anzeigen zur Netzwerkdiagnose
- Arbeitet mit den Media Chassis der PLANET MC-Familie zusammen (MC-700 / MC-1500/ MC-1500R / MC-1500R48)
- Kompakte Größe, einfache Installation
100/100Mbps Downstream / Upstream, Hochleistungs-Ethernet über VDSL Lösung
PLANET VC-231 ist ein Ethernet-over-VDSL2-Konverter mit hoher Leistung. Er wurde auf der Grundlage von zwei zentralen Netzwerktechnologien entwickelt: Ethernet und VDSL2 (Very-high-data-rate Digital Subscriber Line 2). Die VDSL2-Technologie bietet die absolut schnellste Datenübertragungsgeschwindigkeit über bestehende Kupfertelefonleitungen, ohne dass eine Neuverkabelung erforderlich ist. Der VC-231 unterstützt Ultra-High-Performance für das flächendeckende Telefonleitungsnetz mit bis zu 100/100Mbps symmetrischer Datenrate innerhalb von 300m und 50/2Mbps für 1,4km lange Verbindungen.
Implementierung mit bestehenden Telefon-Kupferdrähten
Der VC-231 ist auch ein Long Reach Ethernet (LRE) Konverter mit einem RJ-45 Ethernet Port und einer RJ-11 Telefonbuchse, die für VDSL2 Verbindungen geeignet ist. Mit dem zusätzlichen Splitter aus dem VC-231-Paket kann der Splitter einen POTS-Splitter bereitstellen, um die vorhandene Telefonleitung mit POTS zu teilen; daher ist es nicht notwendig, die vorhandene Kupferleitung zu ersetzen. Stecken Sie den VC-231 mit zusätzlichem Splitter einfach in die vorhandene RJ-11-Telefonbuchse und schon kann ein leistungsstarkes VDSL2-Netz angeschlossen werden. Der VC-231 ist ideal als Ethernet-Extender für ein bestehendes Ethernet-Netzwerk geeignet.
Bereitstellung von anspruchsvollen Servicekonnektivität für ISP-/Triple-Play-Geräte
Der VC-231 bietet eine exzellente Bandbreite, um Triple-Play-Geräte für Home Entertainment und Kommunikation zu bedienen. Mit der Fähigkeit zur symmetrischen Datenübertragung von 100/100Mbps ermöglicht der VC-231 die Nutzung vieler Multimedia-Dienste über das lokale Internet, wie z.B. VOD (Video on Demand), Voice over IP, Videotelefonie, IPTV, Internet-Caching-Server, Fernunterricht und so weiter.
Einfache und flexible Installation
Der Ethernet-over-VDSL2-Konverter verfügt über ein Plug-and-Play-Design und ist vollständig kompatibel mit allen Arten von Netzwerkprotokollen. Darüber hinaus kann der Betriebsstatus jedes einzelnen Ports und des gesamten Systems über die zahlreichen Diagnose-LEDs an der Vorderseite überwacht werden. Der VC-231 bietet zwei Betriebsarten, CPE und CO, für die Anwendung: Der CPE-Modus wird auf der Client-Seite verwendet und der CO-Modus auf der zentralen Seite. Der CPE- oder CO-Modus kann mit Hilfe eines eingebauten DIP-Schalters eingestellt werden. Für Punkt-zu-Punkt-Verbindungen müssen ein VC-231 im CPE-Modus und ein VC-231 im CO-Modus als ein Wandlerpaar eingerichtet werden, um die Verbindung herzustellen.
Hervorragende Upstream- und Downstream-Übertragungsleistung
Der VC-231 definiert auch einen symmetrischen Bandplan für die Übertragung von Upstream- und Downstream-Signalen, der im symmetrischen Modus eine höhere Übertragungsqualität im Nahbereich für die zentrale Seite (CO) bietet. Wenn der VC-231 im Profil 17a betrieben wird, bietet er Langstreckenübertragung mit Ultra-High-Performance für das weitverzweigte Telefonnetz, und wenn der VC-231 im 30a-Betriebsmodus betrieben wird, bietet er Kurzstreckenübertragung mit Upstream- und Downstream-Übertragung mit Wire Speed Performance.

• UP1302C-12
• 12V 10.8A

  12V 10.8A internal power supply for CCR1036 series (only for new r2 revisions with dual power supplies)

   

• Power Requirements: 100-240V AC
• Power Consumption: 130 Watts

  The MC-RPS130 is a 100-240VAC 130W Redundant Power Supply for Planet Technology models MC-1610MR and MC-1610MR48.

• Hochwertiger Einbau in 19“-Rackmount-Chassis
• Unterstützt bis zu 14 modulare Medienkonverter
• Zwei Lüfter sorgen für den Luftstrom zur Systemkühlung und LED-Anzeigen für System- und Lüfterstatus
• Stromisolierung der Bucht, stellen Sie sicher, dass jede Bucht elektrisch voneinander isoliert ist
• Unterstützt mehrere Konverter – 10/100/1000 Mbit/s, Kupfer, Glasfaser, Single/Multi-Mode (alle Lightwin® LWC-Medienkonverter)
• Reduzieren Sie den Aufwand für die Wartung und Verwaltung des Konverters, diagnostizieren Sie den Status auf einmal
• Kostengünstige, einfache Installation

Lightwin Chassis bieten die professionelle Alternative zu mehreren standalone Konvertern in einem 19" Schrank. Durch das redundante Netzteil und 2 Lüfter pro Chassis bietet dieses Produkt eine ausfallsichere Lösung.    

• 16x10/100/1000BASE-T Gigabit Ethernet ports
• Supports auto MDI/MDI-X function
• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Integrated address look-up engine, supporting 8K absolute MAC addresses
• 10K jumbo packet support
• Power Saving ability for Green networking
• IEEE 802.1Q VLAN packet transparency support
• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
• Hardware based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode, flow control, and auto-negotiation
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• 100~240V AC, 0.3A, 50~60Hz universal power input
• FCC, CE Class A compliant

      Cost-Effective Gigabit Solution for Enterprise Backbone and Data Center Networking PLANET GSW-1601 provides 16 RJ-45 10/100/1000Mbps ports for high-speed network connectivity. It can automatically identify and determine the correct transmission speed and half / full duplex mode of the attached devices with its 16 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-1601 can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers.   High Performance The GSW-1601 provides high performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 32Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the Flow Control function of the GSW-1601 enables routers and servers directly connect to the Switch for fast and reliable data transfer.   All RJ-45 copper interfaces of the GSW-1601 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.   Excellent Traffic Transmission The GSW-1601 supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the GSW-1601 could recognize up to 8K different MAC address. The high data throughput and 32Gbps internal switching fabric makes it ideal for most Gigabit environments, especially when network upgrades to a Gigabit environment.

• 16-port 10/100/1000BASE-T Gigabit RJ45 copper with 802.3at PoE+ injector function
• 2 1000BASE-X mini-GBIC/SFP slots

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port, all power up to 240W PoE budget.
• Each port supports 52V DC power to PoE powered device
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

  Switching:

• Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• 9K jumbo frame supports all speeds (10/100/1000Mbps)
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for Standard, VLAN and Extend mode selection;
• VLAN mode: Ports 1 to 14 cannot communicate with each other, but can communicate with the uplink ports 15 to 16 and SFP ports 17 to 18
• Extend mode: Ports1 to 8 have data rate of 10Mbps. The farthest transmission distance up to 250 meters and all ports can communicate with each other.
• The DIP switch can isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

  Hardware:

• 19-inch desktop size, 1U height
• LED indicators for PoE ready and PoE activity
• Ethernet Link Energy-saving technology
• Link down power savings
• Intelligent use of power based on cable length

• 16x 10/100Mbps Fast Ethernet ports unmanaged
• Supports auto MDI/MDI-X function
• Layer 2 Features
• Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX Ethernet standards
• Supports powerful Green Ethernet to power saving
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Handles up to 1522 bytes packet size
• Complies with IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Integrated address look-up engine, supports 8K absolute MAC addresses
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• Hardware Features
• 100~240V AC, 50~60Hz, 0.3A universal power input
• FCC, CE class A compliant

  Power-saving, High-performance Ethernet Networking PLANET Green Networking Switch- FNSW-1601 is an ideal solution in line with the energy-saving trend worldwide. The FNSW-1601 is a 16-port 10/100Base-TX Fast Ethernet Switch upgraded from earlier version and brings both benefits of energy saving and high performance.   Energy Saving The FNSW-1601 incorporates advanced Green Networking technology:

• Intelligent scales power based on cable length

The intelligent scales power is an intelligent algorithm that actively determines the appropriate power level based on cable length. The FNSW-1601 would automatically detect the Ethernet cable length and adjust power usage accordingly. The connected device can substantially reduce overall power consumption, which makes a significant contribution to energy saving. The FNSW-1601 uses new engine that provides power saving up to 22% less energy but maintains high performance efficiently.      High Performance The high performance throughput (filtering / forwarding rate: 14,880 packets per second in 10Mbps, 148,800pps in 100Mbps) and dynamic shared memory buffer help the FNSW-1601 boost bandwidth, eliminate unnecessary traffic, and relieve congestion on your critical server path. The FNSW-1601 is the ideal choice to alleviate bottlenecks in client / server and peer-to-peer environments in a cost effective way.   Plug and Play The FNSW-1601 provides users with high speed network connections. With its auto-negotiation capability, all the RJ-45/STP ports of the FNSW-1601 can be configured to speeds of 10/20Mbps or 100/200Mbps automatically. What's more, the MDI/ MDIX auto-detection is for easy, plug and play connection, regardless of the cabling type, straight-through or crossover.

• 16x Gigabit RJ45-Ports
• 1U 13-Zoll-Rack-montierbares Stahlgehäuse
• Features:
  • MTU-/Port-/Tag-basiertes VLAN, QoS, IGMP-Snooping, Web-/Utility-Management, Plug and Play

• 16 10/100/1000Mbit/s-Ports
• Netzüberwachung, Trafficpriorisierung und VLAN-Funktionen
• Innovative energieeffiziente Green IT, spart bis zu 40% Energie
• Plug-and-Play-Design
• Zentrale Verwaltung all Ihrer Easy-Smart-Switches durch das Easy-Smart-Configuration-Utility

• 8x Gigabit PoE+ Ports
• 8× Gigabit-Non-PoE-Ports
• 802.3at/af, 110 W PoE-Leistung
• 1U 13-Zoll-Rack-montierbares Stahlgehäuse
• Features:
  • MTU-/Port-/Tag-basiertes VLAN, QoS, IGMP-Snooping, Web-/Utility-Management

• 16 10/100/1000Mbit/s-RJ45-Ports
• 8 PoE+-Ports, die Daten und Energie über ein einziges Kabel übertragen können
• Speist IEEE802.3af/at-kompatiblen Geräte
• Einfache Einrichtung, Plug and Play
• Konfigurierbar über Weboberfläche und Konfigurationstool
• Aktive Kühlung

• 3-port 10/100/1000BASE-T Gigabit RJ45 interface

- 1-port data + power input - 2-port data + power output   Power over Ethernet

• 1-port data + power input

- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD - Supports PoE input power up to 30.8 watts

• 2-port data + power output

- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE - Up to 2 IEEE 802.3af/802.3at devices powered - Supports PoE power up to 25 watts for each PoE port - Auto detects powered device (PD)

• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device

  Layer 2 Features

• Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 10K iumbo packet support
• IEEE 802.1Q VLAN transparency
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol

  Case and Installation

• No external power cable installation required
• Made of metal, desktop size design
• Wall-mountable, Plug-and-Play installation
• 0 ~ 50 degrees C operating temperature

  PoE Solution for Breaking RJ45 100m Limitation PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.   Plug and Play Installation The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.  

• Eliminates power cabling with PoE over UTP
• Supports Power over Ethernet PSE (PoE Injector)
• Power and Ethernet data transmission of 500m over UTP cabling
• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD on RJ45 port
• Supports Long Reach PoE power up to 30.8 watts (depending on power source and cable distance)
• Supports PoE Power up to 25 watts (depending on power source and cable distance)
• Auto detects remote powered device (PD)
• Plug and Play; no PC required

  Industrial Case and Installation:

• Supports extensive LED indicators for network diagnostics
• Metal case protection
• Compact size, DIN-rail and wall-mount design
• Supports EFT surge protection of 4KV DC for power line
• Supports Ethernet ESD protection of 2kV DC
• -20 to 70 degrees C operating temperature

PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 802.3af/at PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.    Convenient PoE over UTP Extender in Harsh Environment: The LRP-101U-KIT, a PLANET Long Reach PoE solution, is a Single-port PoE over UTP Extender Kit featuring long range data and power transmission for distance up to 500m (1,640ft.) over UTP cable, and another 100m over Ethernet cable to remote PoE IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE. The LRP-101U-KIT provides point to point application for easy plug-n-play operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. Without the problem of power source, it makes the installation of remote PoE powered devices easier and more efficiently.    Composition of Long Reach PoE over UTP Extender Kit: The LRP-101U-KIT consists of a Long Reach PoE injector and a Long Reach PoE extender set which can work in pair anywhere on your network infrastructure. It contains two brand-new products:  ■ LRP-101UH: 1-Port 10/100TX PoE PD + 1-Port UTP Long Reach PoE Injector  ■ LRP-101UE: 1-Port 10/100TX PoE PSE + 1-Port UTP Long Reach PoE Extender   The LRP-101UH transmits data and power over UTP cable to the LRP-101UE, which can be located as far as 500m away. It will then deliver the data and power output with a maximum of up to 25 watts to a PoE PD over Ethernet cable, thus expediting the IP surveillance network or wireless LAN infrastructure in long distance. Both of the two products come in a compact but rugged metal housing. Their wall-mounted design fits easily in any space-limited location.    IP Ethernet and Power over Long UTP or Twisted-pair Cable: A normal UTP cable can only be extended up to 100 meters, but the LRP-101U-KIT can extend PoE networking up to 500 meters (1,640ft.) over long 4-pair UTP cable or up to 300 meters (1,000ft.) over an existing 1-pair twisted-pair cable, such as telephone wire, with stable, high-quality video transmission. It eliminates the need for additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE IP camera at long range.    Stable Operating Performance under Difficult Environments: PLANET Long Reach PoE Extender Kit is the perfect solution for distance extension for PoE or non-PoE networking for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature ranging from -20 to 70 degrees C to enable the users to conveniently operate the kit in almost any location.    Plug-n-play Installation: With the plug and play feature, PLANET Long Reach PoE Extender Kit can be used immediately without the need of configuration and is also compliant with all kinds of IP network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator to efficiently manage the network.

• 16x Gigabit PoE+ Ports
• 2x Gigabit-Non-PoE-Ports
• 2x Combo-Gigabit-SFP-Slots
• 802.3at/af
• 250 W PoE-Leistung
• 1HE 19-Zoll-Rack-montierbares Stahlgehäuse
• Plug-and-Play

• 16x Gigabit PoE+ RJ45 Ports
• 2x Gigabit non-PoE RJ45 Ports, und 2x Combo Gigabit SFP slots
• High PoE power budget mit bis zu 30W an jedem PoE-Port und 250W insgesamt
• Funktioniert mit IEEE 802.3af/at kompatiblen PoE-Geräten
• Plug & play ohne Konfiguration
• 802.1p/DSCP QoS sichert die flüssige Übertragung von Latenzempfindliche Datenübertragungen
• Das stabile Metallgehäuse und ein professionelles Wärmeableitungsdesign sichern eine hohe Betriebstemperatur (0-50°C)mit hoher Zuverlässigkeit