LTE-A Cat6 Dual SIM Router, 4x 1Gbit, GPS, microSD
- 4G (LTE) - CAT6 up to 300 Mbps
- 3G up to 42 Mbps
- DC-HSDPA / HSUPA / WCDMA
- Dual SIM, Auto-Switch
- 4x 1 Gbit Ethernet
- GPS (Antennas seperately available)
- SMS
Mobile:
- Mobile module: 4G (LTE) Cat 6 up to 300 Mbps, 3G Up to 42 Mbps
- SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
- Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
- Bridge: Direct connection (bridge) between mobile ISP and device on LAN
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- Black/White list: Operator black/white list
- Multiple PDN: Possibility to use different PDNs for multiple network access and services
- Band management: Band lock, Used band status display
Ethernet:
- WAN: 1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN: 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network:
- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
- NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT
- VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall: Port forward, traffic rules, custom rules
- DHCP: Static and dynamic IP allocation, DHCP Relayd
- QoS: Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS: Supported >25 service providers, others can be configured manually
- Network backup: VRRP, Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
- Load balancing: Balance your internet traffic over multiple WAN connections
- SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
Security:
- Authetication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Atack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN: Port based and tag based VLAN separation
- Mobile quota control: Set up custom data limits for both SIM cards
- WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN:
- OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- Ipsec: IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel
- PPTP, L2TP: Client/Server services can run simultaneously
- Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code.
Monitoring & Management:
- WEB: UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
- FOTA: Firmware update from server, automatic notification.
- SSH: SSH (v1, v2)
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
- SNMP: SNMP (v1, v2, v3), SNMP trap
- JSON-RPC: Management API over HTTP/HTTPS
- MODBUS: MODBUS TCP status/control
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
- MQTT: MQTT Broker, MQTT publisher
- RMS: Teltonika Remote Management System (RMS)
System Characteristics:
- CPU: Quad-core ARM Cortex A7, 717MHz
- RAM: 256MB, DDR2
- FLASH memory: 256MB SPI Flash
Firmware / Configuration:
- WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA: Update FW/configuration from server
- RMS: Update FW/configuration for multiple devices
- Keep settings: Update FW without losing current configuration
Firmware Customization:
- Operating system: RutOS (OpenWrt based Linux OS)
- Supported languages: Busybox shell, Lua, C, C++
- Development tools: SDK package with built environment provided
Location Tracking:
- GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
- Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEA: NMEA 0183
- Server software: supported server software TAVL, RMS
- Mobile Network Geolocation: Location without using GPS, get approximate location based on mobile tower on RMS
- Geofencing: Configurable multiple geofence zones
USB:
- Data rate: USB 2.0
- Applications: Samba share, custom scripts
- External devices: Possibility to connect external HDD, flash drive, additional modem, printer
- Storage formats: FAT, FAT32, NTFS
Power:
- Connector: 4 pin industrial DC power socket
- Input voltage range: 9 50 VDC, reverse polarity protection, voltage surge/transient protection
- PoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
- Power consumption: 11W Max.
Physical Interfaces:
- Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
- Status LEDs: 3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
- SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8V/3V
- Power: 4 pin industrial DC power socket
- Antennas: 2 x SMA for LTE, 1 x SMA for GNNS
- USB: USB A socket for external devices
- Reset: Reset/restore to default button
Physical Specification:
- Casing material: Full aluminium housing
- Dimensions: 115 mm x 95 mm x 44 mm (H x W x D)
- Weight: 456g
- Mounting options: DIN rail (can be mounted on two sides), flat surface placement
Operating Environment:
- Operating temperature: -40 C to 75 C
- Operating humidity: 10% to 90% non-condensing
- Ingress Protection Rating: IP30
Available stock:
Article number:
RUTX09
Manufacturer number:
RUTX0920B200
Manufacturer page:
TELTONIKA
EAN:
4779027312460
- 4G (LTE) - CAT6 up to 300 Mbps
- 3G up to 42 Mbps
- DC-HSDPA / HSUPA / WCDMA
- Dual SIM, Auto-Switch
- 4x 1 Gbit Ethernet
- GPS (Antennas seperately available)
- SMS
Mobile:
- Mobile module: 4G (LTE) Cat 6 up to 300 Mbps, 3G Up to 42 Mbps
- SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
- Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
- Bridge: Direct connection (bridge) between mobile ISP and device on LAN
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- Black/White list: Operator black/white list
- Multiple PDN: Possibility to use different PDNs for multiple network access and services
- Band management: Band lock, Used band status display
Ethernet:
- WAN: 1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN: 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network:
- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
- NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT
- VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall: Port forward, traffic rules, custom rules
- DHCP: Static and dynamic IP allocation, DHCP Relayd
- QoS: Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS: Supported >25 service providers, others can be configured manually
- Network backup: VRRP, Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
- Load balancing: Balance your internet traffic over multiple WAN connections
- SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
Security:
- Authetication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Atack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN: Port based and tag based VLAN separation
- Mobile quota control: Set up custom data limits for both SIM cards
- WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN:
- OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- Ipsec: IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel
- PPTP, L2TP: Client/Server services can run simultaneously
- Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code.
Monitoring & Management:
- WEB: UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
- FOTA: Firmware update from server, automatic notification.
- SSH: SSH (v1, v2)
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
- SNMP: SNMP (v1, v2, v3), SNMP trap
- JSON-RPC: Management API over HTTP/HTTPS
- MODBUS: MODBUS TCP status/control
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
- MQTT: MQTT Broker, MQTT publisher
- RMS: Teltonika Remote Management System (RMS)
System Characteristics:
- CPU: Quad-core ARM Cortex A7, 717MHz
- RAM: 256MB, DDR2
- FLASH memory: 256MB SPI Flash
Firmware / Configuration:
- WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA: Update FW/configuration from server
- RMS: Update FW/configuration for multiple devices
- Keep settings: Update FW without losing current configuration
Firmware Customization:
- Operating system: RutOS (OpenWrt based Linux OS)
- Supported languages: Busybox shell, Lua, C, C++
- Development tools: SDK package with built environment provided
Location Tracking:
- GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
- Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEA: NMEA 0183
- Server software: supported server software TAVL, RMS
- Mobile Network Geolocation: Location without using GPS, get approximate location based on mobile tower on RMS
- Geofencing: Configurable multiple geofence zones
USB:
- Data rate: USB 2.0
- Applications: Samba share, custom scripts
- External devices: Possibility to connect external HDD, flash drive, additional modem, printer
- Storage formats: FAT, FAT32, NTFS
Power:
- Connector: 4 pin industrial DC power socket
- Input voltage range: 9 50 VDC, reverse polarity protection, voltage surge/transient protection
- PoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
- Power consumption: 11W Max.
Physical Interfaces:
- Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
- Status LEDs: 3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
- SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8V/3V
- Power: 4 pin industrial DC power socket
- Antennas: 2 x SMA for LTE, 1 x SMA for GNNS
- USB: USB A socket for external devices
- Reset: Reset/restore to default button
Physical Specification:
- Casing material: Full aluminium housing
- Dimensions: 115 mm x 95 mm x 44 mm (H x W x D)
- Weight: 456g
- Mounting options: DIN rail (can be mounted on two sides), flat surface placement
Operating Environment:
- Operating temperature: -40 C to 75 C
- Operating humidity: 10% to 90% non-condensing
- Ingress Protection Rating: IP30
Technical properties
1 GBit Ports:
4
Antenna Connector:
2x SMA (LTE), 1 x SMA (GNNS)
CPU core count:
4
CPU nominal frequency:
717 MHz
Case material:
Aluminum Alloy
Design:
DIN Rail
Dimensions:
115 x 95 x 44 mm
Firewall Function:
OpenVPN, IPsec, GRE, L2TP, PPTP
Frequency:
-
GPS:
Yes
LEDs:
Ethernet, Power, Signal
LTE Category:
CAT 6
LTE Support:
Yes
Memory Slot / Card type:
MicroSD
Mobile Standard:
3G/4G
Mounting:
DIN-Rail
Network Ports:
4-Port
Number of Ports:
1 - 7
Operating Conditions:
-40°C - +75°C
Operating Humidity:
10 - 90%, non-condensing
PoE Standard:
IEEE 802.3 Passive PoE
PoE Support:
Passive-PoE
Port Speed, RJ45:
10 Mbit/100 Mbit/1 Gbit
Power Consumption:
11 W
Power Consumption max.:
9.0 W
Power Jack:
4 pin industrial DC power socket
Power Supply:
100 - 240 VAC / 9 - 50 VDC
SFP Ports:
-
SIM Slots:
2
Safety Class:
IP30
Security:
64/128-bit WEP, WPA, WPA2, WPA&WPA2
Size of RAM:
256Mb DDR2
Storage Type internal:
256MB SPI Flash
USB Slot Type:
USB A
USB Standard:
USB 2.0
WAN Connection Type:
LTE / 4G
WLAN:
No
WIssenswertes zum Thema
