Skip to main content Skip to search Skip to main navigation
TECHNOLOGIES

Splice box vs. PRETERM BOX: Two installation methods, three solutions

Splice boxes and PRETERM BOXes do not serve the same purpose. Find out how these two 19-inch solutions differ and which component is the right choice for your specific installation method.

Fibre-optic cables rarely terminate directly at the active equipment in the equipment room. There is always a transfer point in between, where the laid cable is routed to connectors. Depending on whether splicing is carried out on-site or pre-terminated cables are used, a different component is required for this.

Rocky mountain ridge with snow-covered tops

Functions of a splice box

If the fibre-optic cable is spliced on-site, the splice box fulfils three key functions: it protects the sensitive splice points, routes the fibres whilst adhering to the minimum bend radii, and provides connections for patch cables.

In particular, the neat arrangement of the fibres within the splice cassette is crucial. If fibres are pinched or subjected to stress when the lid is closed, micro-bends or breaks can occur, which often only become apparent during technical acceptance testing.

The interplay: housing, cassette, splice protection

After splicing, each splice is fitted with a splice protector. The LIGHTWIN range of accessories includes heat-shrink splice protectors (40 mm or 60 mm), crimp splice protectors (CRIMPSPLEISSSCHUTZ-30, 30 pieces per strip), as well as suitable splice holders (LWL SPLEISSHALTER 12, LWL CRIMPSPLEISSHALTER) and splice cassettes (LWL SPLEISSKASSETTE).

Choosing the right splice box

For standard splice installations, the LIGHTWIN range offers three options:

  • Pre-assembled splice boxes available from stock (SPBOX series):
    These pull-out 1U enclosures are ready for immediate use. Bend-insensitive Easystrip pigtails are pre-inserted according to the DIN colour code, and splice cassettes, holders and splice protection are included. The boxes are available for OS2, OM3 and OM4 (12 to 96 fibres).
  • Project-specific splice boxes:
    If a project deviates from the standard – for example, with specific fibre counts, special connector types, polish types (UPC/APC) or mixed configurations – enclosures such as the LVL GREY PREMIUM (1U) or LVL GREY STANDARD (2U / 3U) are custom-assembled to your specifications.
  • The PRETERM BOX, the solution for pre-terminated runs:
    PRETERM cables are manufactured ex-works according to your specifications for length, fibre type and connectors – including a pull-through aid, cable splitter and individual test report. As no splicing takes place on site, neither pigtails nor splice cassettes are required. All that is required is a specially designed enclosure to neatly accommodate the pre-assembled cable whips: the PRETERM BOX, a 19-inch empty box.

Scope of supply and documentation

Each splice box is supplied with a full set of splicing accessories and an individual test report. The report documents the initial condition and facilitates subsequent acceptance testing and fault-finding.

When to use which solution?

Situation

Standard configuration, rapid availability

Specific number of fibres, connectors or mixed configuration

Pre-terminated installation cables (PRETERM)

Suitable solution

Pre-assembled splice box (SPBOX …)

Project-specific splice box

PRETERM BOX as a 19" empty box

Conclusion

Whether you are splicing on site or working with pre-terminated cables: with pre-assembled boxes available from stock, project-specific configurations and the PRETERM BOX, LIGHTWIN covers all common installation methods – complete with a test report and accessories supplied ex works.

product highlights

SPBOX 96E09 OS2 QLC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48E09 OS2 DLC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48G50 OM4 DSC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48G50 OM4 DLC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48G50 OM3 DSC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48E09 OS2 DSC/APC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 48E09 OS2 DSC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 24G50 OM4 SC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 24G50 OM3 SC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
SPBOX 12G50 OM4 SC
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk