UniFi Building Bridge 60 GHz Gigabit+ Wireless, 802.11ad, Single-Pack
The UniFi Building-to-Building Bridge, model UBB, is the ideal solution for high-throughput connectivity with a range of up to 500 m. Integration with the UniFi Controller makes bridging two networks seamless.
Comprised of two pre-paired endpoint devices, the UBB delivers a Point-to-Point (PtP) link – up to 1+ Gbps – using 802.11ad technology on the low-interference 60 GHz radio band. For backup, a 5 GHz radio using 802.11ac technology is available.
60 GHz Operating Frequency:
The 60 GHz band attenuates quickly due to atmospheric absorption. When a 60 GHz radio – such as the UBB – uses a highly directional antenna, inteference from other directions is also attenuated. The 60 GHz band thus offers extremely high transmission capacity as a wireless wire.
Wireless Link Redundancy:
60 GHz is highly directional and any obstacle in the line of sight – even rain – can drop signal levels.
To maintain connectivity, the UBB can fail over to the 5 GHz radio. The 5 GHz radio band propagates better and uses radio wave reflections and refractions more effectively, although it offers lower maximum throughput.
Pre-Paired Configuration:
Setup is quick and easy: the UBB radios are pre-paired out of the box so you can use the UniFi app for simultaneous adoption.
The UniFi Controller software enables intuitive management of individual UniFi devices and site-wide deployments.
Sleek Industrial Design:
The UBB is designed with a compact form factor for discreet integration into any environment.
Convenient Alignment:
The UBB pivots on its ball joint 3-axis mount for easy aiming.
Mounting Versatility:
No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. A wall mount kit, model NBE-WMK, is available as an optional accessory to enhance stability.
Available stock:
Article number:
UBB-SINGLE
Manufacturer number:
UBB-SINGLE
Manufacturer page:
UBIQUITI
EAN:
0810177169246
- Low-Interference 60 GHz Radio Band
- 5 GHz Radio for Backup
- Pre-Paired Radios for Quick Setup Using UniFi App
The UniFi Building-to-Building Bridge, model UBB, is the ideal solution for high-throughput connectivity with a range of up to 500 m. Integration with the UniFi Controller makes bridging two networks seamless.
Comprised of two pre-paired endpoint devices, the UBB delivers a Point-to-Point (PtP) link – up to 1+ Gbps – using 802.11ad technology on the low-interference 60 GHz radio band. For backup, a 5 GHz radio using 802.11ac technology is available.
60 GHz Operating Frequency:
The 60 GHz band attenuates quickly due to atmospheric absorption. When a 60 GHz radio – such as the UBB – uses a highly directional antenna, inteference from other directions is also attenuated. The 60 GHz band thus offers extremely high transmission capacity as a wireless wire.
Wireless Link Redundancy:
60 GHz is highly directional and any obstacle in the line of sight – even rain – can drop signal levels.
To maintain connectivity, the UBB can fail over to the 5 GHz radio. The 5 GHz radio band propagates better and uses radio wave reflections and refractions more effectively, although it offers lower maximum throughput.
Pre-Paired Configuration:
Setup is quick and easy: the UBB radios are pre-paired out of the box so you can use the UniFi app for simultaneous adoption.
The UniFi Controller software enables intuitive management of individual UniFi devices and site-wide deployments.
Sleek Industrial Design:
The UBB is designed with a compact form factor for discreet integration into any environment.
Convenient Alignment:
The UBB pivots on its ball joint 3-axis mount for easy aiming.
Mounting Versatility:
No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. A wall mount kit, model NBE-WMK, is available as an optional accessory to enhance stability.
Technical properties
1 GBit Ports:
1
Antenna Gain dBi:
2.4 GHz: 2 dBi, 5 GHz: 10 dBi, 60 GHz: 17.2 dBi
Beamwidth:
30°
Bluetooth:
Management
Case material:
UV-Resistant Polycarbonate
Certificate:
CD, FCC, IC
Dimensions:
14 x 140 x 90mm
ESD/EMP Protection:
± 24kV Contact/Air
Field of application:
Outdoor
Frequency:
60 Ghz
GPS:
Yes
Max. TX Power:
5 GHz: 25 dBm, 60 GHz: 32 - 36.5 dBm
Mounting:
Pole-Mount, Wall Mount
Operating Conditions:
-40°C - +60°C
Operating Humidity:
5 - 95%, non-condensing
PoE Standard:
IEEE 802.3 af/Passive PoE
PoE Support:
IEEE 802.3 af, Passive-PoE
Power Consumption:
11 W
Power Supply:
PoE
Product Family:
Building Bridge
WLAN Standard:
IEEE 802.11ad
Wind load resistance:
56N @ 200km/h
Wireless Clients:
1
Downloads
Datenblatt_en.pdf
WIssenswertes zum Thema
