Single Port PoE Injector, IEEE 802.3af, 15W, EU
The Teltonika EU Single Port Gigabit PoE Injector PR322EU7 combines network data and power delivery over a single Ethernet connection. Its RJ45 data input supports 10/100/1000 Mbps, while the second RJ45 port provides Gigabit Ethernet and active power delivery compliant with IEEE 802.3af. Power is supplied using Mode A, with pins 1/2 carrying positive voltage and pins 3/6 carrying negative voltage. The PoE output is rated at 52 VDC with a maximum current of 0.35 A.
The injector accepts 100–240 VAC at 50/60 Hz and uses a European Type E/F mains connection. It measures 118.2 × 52.9 × 33.3 mm, includes a 1,200 mm mains cable and weighs 365 g. A specified MTBF of 100,000 hours, RoHS compliance and EN 62368-1:2014+A11:2017 safety certification make it a dependable solution for professional PoE network installations.
- Active single-port PoE injector compliant with IEEE 802.3af
- Gigabit data transmission at 10/100/1000 Mbps
- 52 VDC PoE output with up to 0.35 A
- Mode A power delivery via pins 1/2 and 3/6
- Dedicated RJ45 ports for data input and PoE output
- Wide-range 100–240 VAC input at 50/60 Hz
- European Type E/F mains connection
- Specified MTBF of 100,000 operating hours
- RoHS compliant and certified to EN 62368-1:2014+A11:2017
The Teltonika PR322EU7 enables a compatible IEEE 802.3af powered device to receive Gigabit data and electrical power through a single Ethernet cable. Typical applications include suitably specified wireless access points, IP cameras, gateways and other network devices installed where a separate power outlet is unavailable or inconvenient. The injector is suitable for system integrators, IT departments, network technicians and installation professionals upgrading existing Gigabit Ethernet connections with standards-based active PoE. The connected device’s PoE compatibility and power requirements must be verified before installation.
The Teltonika EU Single Port Gigabit PoE Injector PR322EU7 combines network data and power delivery over a single Ethernet connection. Its RJ45 data input supports 10/100/1000 Mbps, while the second RJ45 port provides Gigabit Ethernet and active power delivery compliant with IEEE 802.3af. Power is supplied using Mode A, with pins 1/2 carrying positive voltage and pins 3/6 carrying negative voltage. The PoE output is rated at 52 VDC with a maximum current of 0.35 A.
The injector accepts 100–240 VAC at 50/60 Hz and uses a European Type E/F mains connection. It measures 118.2 × 52.9 × 33.3 mm, includes a 1,200 mm mains cable and weighs 365 g. A specified MTBF of 100,000 hours, RoHS compliance and EN 62368-1:2014+A11:2017 safety certification make it a dependable solution for professional PoE network installations.
WIssenswertes zum Thema
