Omada 4G+ Cat6 AX3000 Wi-Fi 6 Outdoor/Indoor Gateway
The TP-Link Omada ER703WP-4G-Outdoor is a 4G+ Cat6 AX3000 Wi-Fi 6 outdoor/indoor gateway for cellular and wired network deployment. For the EU region, LTE Cat6 supports LTE-FDD bands B1/B3/B5/B7/B8/B20/B28/B32 and LTE-TDD bands B38/B40/B41. Cellular data rates reach up to 300 Mbps downlink and 50 Mbps uplink. A Nano SIM card slot is provided for mobile network access.
For wireless networking, the gateway provides AX3000 Wi-Fi 6 with up to 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. Supported WiFi features include OFDMA, beamforming, MU-MIMO, airtime fairness, rate limiting, WPA/WPA2/WPA3 Personal and Enterprise, and up to 16 SSIDs. The built-in WiFi antennas provide 4.0 dBi gain on 5 GHz and 2.3 dBi on 2.4 GHz, while LTE connectivity uses two detachable 4.0 dBi omnidirectional antennas.
The hardware includes three Gigabit WAN/LAN ports, with one PoE-in port and two PoE-out ports. Power can be supplied via 802.3at/bt PoE or a 12 V DC / 2 A power adapter. Maximum power consumption is 14.5 W without PoE and 63 W with PoE. The IP55-rated, UV-resistant enclosure is designed for pole or wall mounting and operates from -30 to +60 °C. With proper installation, grounding and cable shielding, 4 kV lightning protection is supported.
For professional networks, the ER703WP-4G-Outdoor supports 802.1Q VLAN, static routing, policy routing, RIP, OSPF, NAT, DHCP, IPv6, IPTV, access control, DPI, web and URL filtering, ARP inspection, and protection against TCP/UDP/ICMP flooding and WAN ping. VPN functions include IPsec, PPTP, L2TP, OpenVPN, WireGuard, SSL VPN and GRE in standalone mode. Management is available via Omada Cloud Essentials, Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller, Omada app, web interface, SNMP v1/v2c/v3, remote management, syslog and diagnostic tools.
- 4G+ Cat6 with up to 300 Mbps
- AX3000 Wi-Fi 6 with 2402 + 574 Mbps
- 3× Gigabit WAN/LAN ports
- 1× PoE in and 2× PoE out
- 1× Nano SIM card slot
802.3at/bt PoE or 12 V DC - 4G and Ethernet WAN with failover
- IPsec, OpenVPN, WireGuard and SSL VPN
- IP55 weatherproof enclosure for outdoor use
- Centralized management via Omada SDN
The TP-Link Omada ER703WP-4G-Outdoor is designed for flexible internet connectivity at remote sites, outdoor areas, construction sites, holiday facilities, agricultural locations, temporary installations, IP surveillance and backup connection scenarios. The gateway combines 4G+ Cat6 cellular access, AX3000 Wi-Fi 6 and three Gigabit WAN/LAN ports in a single device. This allows wired and wireless clients, as well as PoE-powered devices such as IP cameras, to be connected in outdoor environments.
Automatic backup and load balancing between 4G and Ethernet WAN make the router suitable for installations where connection stability is important even if one access link fails. Power input via 802.3at/bt PoE or 12 V DC supports flexible deployment scenarios, including use with solar power systems. Through Omada Cloud SDN, the device can be centrally managed, supporting system integrators, MSPs, IT departments and operators of distributed sites with deployment, remote maintenance and monitoring.
The TP-Link Omada ER703WP-4G-Outdoor is a 4G+ Cat6 AX3000 Wi-Fi 6 outdoor/indoor gateway for cellular and wired network deployment. For the EU region, LTE Cat6 supports LTE-FDD bands B1/B3/B5/B7/B8/B20/B28/B32 and LTE-TDD bands B38/B40/B41. Cellular data rates reach up to 300 Mbps downlink and 50 Mbps uplink. A Nano SIM card slot is provided for mobile network access.
For wireless networking, the gateway provides AX3000 Wi-Fi 6 with up to 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. Supported WiFi features include OFDMA, beamforming, MU-MIMO, airtime fairness, rate limiting, WPA/WPA2/WPA3 Personal and Enterprise, and up to 16 SSIDs. The built-in WiFi antennas provide 4.0 dBi gain on 5 GHz and 2.3 dBi on 2.4 GHz, while LTE connectivity uses two detachable 4.0 dBi omnidirectional antennas.
The hardware includes three Gigabit WAN/LAN ports, with one PoE-in port and two PoE-out ports. Power can be supplied via 802.3at/bt PoE or a 12 V DC / 2 A power adapter. Maximum power consumption is 14.5 W without PoE and 63 W with PoE. The IP55-rated, UV-resistant enclosure is designed for pole or wall mounting and operates from -30 to +60 °C. With proper installation, grounding and cable shielding, 4 kV lightning protection is supported.
For professional networks, the ER703WP-4G-Outdoor supports 802.1Q VLAN, static routing, policy routing, RIP, OSPF, NAT, DHCP, IPv6, IPTV, access control, DPI, web and URL filtering, ARP inspection, and protection against TCP/UDP/ICMP flooding and WAN ping. VPN functions include IPsec, PPTP, L2TP, OpenVPN, WireGuard, SSL VPN and GRE in standalone mode. Management is available via Omada Cloud Essentials, Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller, Omada app, web interface, SNMP v1/v2c/v3, remote management, syslog and diagnostic tools.
WIssenswertes zum Thema
