NPort® 5100A, 1-port RS-232/422/485 Serial Device Servers
- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts
Available stock:
Article number:
NPORT 5150A
Manufacturer number:
NPORT 5150A
Manufacturer page:
MOXA
EAN:
NPort 5150A/EU V1.0.2
- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts
Technical properties
100 MBit Ports:
1
Automatic Reboot Trigger:
Built-in WDT (watchdog timer)
Case material:
Metal
Connector Serial:
8-pin RJ45
Data Rate:
50 bps - 921.6 kbps
Dimensions:
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x ...
Driver Support Fixed TTY:
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, ...
Driver Support Linux Real TTY:
Linux 2.4.x, 2.6.x, 3.x
Driver Support Windows Real COM:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/ ...
EMC Standards:
EN 55022/24
EMI Standards:
CISPR 22, FCC Part 15B Class A
EMS Standards:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m ...
Ethernet port magnetic insulation protection:
1.5 kV built-in
Input Current:
92.4 mA @ 12 VDC
Interfaces:
Ethernet / RS-232
MTBF:
2,231,530 hrs, Telcordia (Bellcore) Standard TR/SR
Main Speed:
100 Mbit
Operating Conditions:
0 - +60°C (32 - 140°F)
Operating Humidity:
5 to 95% not condensing
Protocol:
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP
Pull High/Low Resistor for RS-485:
1 kOhm, 150 kOhm
RS-485 Data Direction Control:
ADDC™
Security Standards:
UL 60950-1
Serial Interfaces:
1
Serial Parameter: Data Bits:
5, 6, 7, 8
Serial Parameter: Flow Control:
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Serial Parameter: Parity:
None, Even, Odd, Space, Mark
Serial Parameter: Stop Bits:
1, 1.5, 2
Serial Ports Protection:
Level 1 surge, EN 61000-4-5
Serial Signals RS-232:
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Serial Signals RS-422:
Tx+, Tx-, Rx+, Rx-, GND
Serial Signals RS-485-2w:
Data+, Data-, GND
Serial Signals RS-485-4w:
Tx+, Tx-, Rx+, Rx-, GND
Serial Standards:
RS-232/422/485
Storage Temperature:
-40 to 75°C (-40 to 167°F)
Supported Input Voltage:
12 to 48 VDC
System Configuration:
Web Console (with new Quick Setup), Serial Console (NPort 5110A/5150A only), Telnet Console, Win ...
WLAN:
No
Warranty:
5 years
Downloads
Datenblatt_en.pdf
WIssenswertes zum Thema
