Skip to main content Skip to search Skip to main navigation

netFiber 9 Outdoor Switch, 4x SFP+, 5x SFP, 1x 1Gb, PoE-In

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Available stock:
Article number: CRS310-1G-5S-4S+OUT
Manufacturer number: CRS310-1G-5S-4S+OUT
Manufacturer page: MIKROTIK
  • 4x SFP+ Ports
  • 5x SFP Ports
  • 1x 10/100/1000 Ethernet Ports
  • License level 5
  • PoE In
  • Multiple Powering Options

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

Technical properties
1 GBit Ports, PoE-In:
1
CPU:
98DX226S
CPU core count:
1
CPU nominal frequency:
800 MHz
Certificate:
CD, FCC, IC
Chipset:
98DX226S
Design:
Desktop
Dimensions:
304 x 212 x 71 mm
Licence Level:
5
Main Speed:
1 Gbit Fiber
Managed:
Managed
Number of Ports:
8 - 15
Operating Conditions:
-40°C - +70°C
Operating System:
RouterOS
PoE Standard:
IEEE 802.3 af/at
PoE Support:
Yes
Power Supply:
18 - 57V DC, PoE
SFP+ Ports:
4
SFP Ports:
5
Size of RAM:
256 MB DDR3
Similar articles
RB960PGS-PB
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

WIssenswertes zum Thema

Technologies
FLUKE Patch Cord Component Test vs. GHMT Type Approval: Zwei Prüfungen, zwei Aussagen
Ein einzelnes Messergebnis und eine unabhängige Typprüfung liefern nicht dieselbe Aussage. Erfahren Sie, wie sich FLUKE Patch Cord Component Test und GHMT Type Approval unterscheiden und warum beide Prüfungen unterschiedlich zu bewerten sind.
read more
Distribution
TELTONIKA
Use Case
4G router with an automatic tyre maintenance system
Goodyear relies on the Teltonika RUT951 for its CheckPoint automated tyre analysis system. The industrial 4G router ensures secure and reliable data transmission, thereby supporting the predictive maintenance of vehicle fleets.
read more
Technologies
Our New Brand for Simple Industrial Networking
With SICO, TRIOTRONIK is launching a new in-house brand for industrial networking technology. The focus is on plug-and-play functionality, robust hardware and straightforward networking solutions for applications where reliability is paramount.
read more
Technologies
LIGHTWIN LFS AUTO CLEAVER – Simplifying Fibre Splicing Workflows
Every hand movement counts when splicing. Find out how the new LIGHTWIN LFS AUTO CLEAVER with automatic blade rotation and integrated collection of fibre residues ensures a more efficient workflow.
read more
Technologies
More Structure in the Network Rack with SLIM Patch Cables
A well-organized network cabinet simplifies maintenance, administration, and future expansion. Discover how slim patch cables and precisely matched cable lengths can improve visibility and efficiency throughout your network infrastructure.
read more

TRIOTRONIK
– Networks That Connect

GET IN TOUCH

Netzwerktechnik & Glasfaser
Technische Tiefe statt Bauchladen - spezialisiert auf moderne Netzwerklösungen mit Fokus auf Glasfaser

30 Jahre Erfahrung
Drei Jahrezehnte Know-how - weitergeben in Schulungen der TRIOTRONIK Akademie.

Individuelle Lösungen
Standard reicht nicht? Wir liefern Sonderlösungen - schnell und pragmatisch.

Eigenmarken aus der Praxis
Von Profis entwickelt: praxistauglich, durchdacht und fair kalkuliert.

Persönliche Beratung
Kompetent, verständlich und nahbar - ohne Hotline-Schleifen.

Starke Logistik
25.000 Artikel sofort verfügbar - für planbare, schnelle Projekte.

TRIOTRONIK Pyramidshape