IP30 Slim Type 5-Port Industrial Fast Ethernet Switch
- 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
Layer 2 Features
- Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
- Supports auto-negotiation and 10/100Mbps half/full duplex mode
- High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- Backplane (switching fabric): 1Gbps
- Integrated address look-up engine, supporting 1K absolute MAC addresses
- Automatic address learning and address aging
Industrial Case & Installation
- IP30-rated metal case
- DIN rail and wall-mount design
- 12 to 48V DC, redundant power with polarity reverse protection function and connective removable terminal block for master and slave power, 24V AC power support
- Lower Power Consumption device in full load operation mode
- Supports EFT protection for 6000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Free fall, shock-proof and vibration-proof for industries
Slim type with more practicability and convenience
After PLANET ISW/IFT Fast Ethernet Switch/Converter series become popular, PLANET has released the advanced industrial hardened Fast Ethernet Switch series with slim type, IP30 metal case. The compact, IP30 standard metal case allows either DIN rail or wall mounting to have the efficient use of cabinet space. The ISW-501T, one of the new models, is equipped with five 10/100Mbps auto negotiation ports and operates reliably in heavy industrial demanding environments.
Stable operating performance under difficult environments
The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.
Robust switch performance
The ISW-501T offers high performance switch architecture. With the five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special-through or crossover cables.
Available stock:
- 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
Layer 2 Features
- Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
- Supports auto-negotiation and 10/100Mbps half/full duplex mode
- High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- Backplane (switching fabric): 1Gbps
- Integrated address look-up engine, supporting 1K absolute MAC addresses
- Automatic address learning and address aging
Industrial Case & Installation
- IP30-rated metal case
- DIN rail and wall-mount design
- 12 to 48V DC, redundant power with polarity reverse protection function and connective removable terminal block for master and slave power, 24V AC power support
- Lower Power Consumption device in full load operation mode
- Supports EFT protection for 6000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Free fall, shock-proof and vibration-proof for industries
Slim type with more practicability and convenience
After PLANET ISW/IFT Fast Ethernet Switch/Converter series become popular, PLANET has released the advanced industrial hardened Fast Ethernet Switch series with slim type, IP30 metal case. The compact, IP30 standard metal case allows either DIN rail or wall mounting to have the efficient use of cabinet space. The ISW-501T, one of the new models, is equipped with five 10/100Mbps auto negotiation ports and operates reliably in heavy industrial demanding environments.
Stable operating performance under difficult environments
The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.
Robust switch performance
The ISW-501T offers high performance switch architecture. With the five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special-through or crossover cables.
Technical properties
100 MBit Ports:
5
Alarm I/O:
Provides one relay output for power failureAlarm relay current carry ability: 3A @ DC 30V
Case material:
metal case
Certificate:
FCC Part 15 Class A, CE
Design:
DIN Rail
Dimensions:
135 x 87 x 32 mm
ESD/EMP Protection:
6KV DC
Flow Control:
Back pressure for half duplex,IEEE 802.3x pause frame for full duplex
LEDs:
3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Green: Power Fault1 x LED for ...
MAC Address Table:
1K
Main Speed:
100 Mbit
Managed:
Unmanaged
Max. Cable Length:
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 m ...
Mounting:
DIN rail kit and wall-mount ear
Network Ports:
5-Port
Number of Ports:
1 - 7
Operating Conditions:
-40°C - +75°C
Operating Humidity:
5 - 95%
PoE Support:
-
Power Consumption:
1.6W / 5.4BTU
Power Supply:
12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Product Family:
Switch Industrial, Fast Ethernet, DIN-Rail
Safety Class:
IP30
Stability Testing:
IEC60068-2-32 (Free Fall)IEC60068-2-27 (Shock)IEC60068-2-6 (Vibration)
Standards & Protocols:
IEEE 802.3 EthernetIEEE 802.3u Fast EthernetIEEE 802.3x Full Duplex Flow ControlIEEE 802.3az Ene ...
Storage Humidity:
5 - 95%, non-condensing
Storage Temperature:
-40°C bis 75°C
Switch Architecture:
Store-and-Forward
Switch Fabric:
1Gbps
Switch Throughput:
0.74Mpps
Downloads
Datenblatt_en.pdf
WIssenswertes zum Thema
