Industrial NTP Server, 10/100 Mbit, RS232, RS485, I/Os
The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.
NTP:
- Supported modes: Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485)
- Daytime Protocol: TCP/UDP
- Date over Serial: RS232/RS485
- NTP: NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode
- Protocol: NTP Stratum 1 Time Server (NTPv4)
- NTP Accuracy: Ethernet NTP ±1ms overall
- NTP Performance: >300 NTP requests per second (wire speed)
- Synchronization Accuracy: LAN synchronization typically 1–10ms
MODBUS:
- Supported modes: Server, Client
- Supported connection types: RTU (RS232, RS485), TCP
- Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
- Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway:
- Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker
Available stock:
Article number:
NTP001
Manufacturer number:
NTP001000000
Manufacturer page:
TELTONIKA
EAN:
4779051843275
- Network Time Synchronization
- Accurate & low-cost NTP server
- Multiple Interfaces featuring RJ45, RS232, RS485 & I/Os
- Security: Authentication, access control & more
- Plug-and-Play: Simple installation & configuration at
- minimum effort
The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.
NTP:
- Supported modes: Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485)
- Daytime Protocol: TCP/UDP
- Date over Serial: RS232/RS485
- NTP: NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode
- Protocol: NTP Stratum 1 Time Server (NTPv4)
- NTP Accuracy: Ethernet NTP ±1ms overall
- NTP Performance: >300 NTP requests per second (wire speed)
- Synchronization Accuracy: LAN synchronization typically 1–10ms
MODBUS:
- Supported modes: Server, Client
- Supported connection types: RTU (RS232, RS485), TCP
- Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
- Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway:
- Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker
Technical properties
100 MBit Ports:
1
Antenna Connector:
1x SMA (GNSS)
CPU:
Mediatek, 580 MHz, MIPS 24KEc
Case material:
Anodized Aluminum
Certificate:
CE, UKCA, CB, UCRF, EAC, WEEE
Dimensions:
82.6 x 25 x 83 mm
Flash Memory:
16 MB, NOR Flash
GPS:
GPS, GLONASS, BeiDou, Galileo, QZSS
Input digital:
3
Management:
WEB UI, SSH, SNMP, JSON-RPC, MODBUS
Mounting:
DIN-Rail, wall-mount
Operating Conditions:
-40°C - +75°C
Operating Humidity:
10 - 90%, non-condensing
Operating System:
RutOS (OpenWrt based Linux OS)
Output digital:
3
Port Speed, RJ45:
10 Mbit/100 Mbit
Power Consumption max.:
<3.5 W
Power Jack:
2-Pin in 16-Pin Industrial Terminal Block
Power Supply:
9 - 30V DC
Safety Class:
IP30
Serial Interface Type:
RS-232 & RS-485
Size of RAM:
128 MB DDR2
WIssenswertes zum Thema
