Gigabit Ethernet Surge Protector (RBGESP, GESP, GESP+POE-IN)
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable.
The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just don’t make it too tight.
You know what they say – hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
You know what they say – hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection.
Together these two devices offer maximum security and peace of mind.
Available stock:
Article number:
GESP+POE-IN
Manufacturer number:
GESP+POE-IN
Manufacturer page:
MIKROTIK
EAN:
9120117652440
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable.
The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just don’t make it too tight.
You know what they say – hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
You know what they say – hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection.
Together these two devices offer maximum security and peace of mind.
Technical properties
Connector A:
RJ45 male
Connector B:
RJ45 Female Connector
ESD/EMP Protection:
100 V/s 1 kV/us, ESD, IEC 61000-4-2, ±30 kV contact, ±30 kV air
Operating Conditions:
-40°C - +70°C
PoE Standard:
IEEE 802.3 af/at
PoE Support:
IEEE 802.3 af/at
Safety Class:
IP67
Downloads
Datenblatt_en.pdf
WIssenswertes zum Thema
