FTTH Multi Wall Penetration, for 4x 12.5 / 4-8 + 1x 20 mm Pipes
The FttH (Fiber to the home) multiple wall duct is a gas and watertight wall duct system for up to 4 micro pipes or cables.
The cap with the filling opening is placed firmly on the outside of the building by anchoring in the borehole. Additional screwing is not necessary.
The use of PU expansion resin type 2234 ensures a seal against gas and water. The packaging of the casting resin in a 2-chamber mixing bag contains enough casting resin to ensure an optimal seal. After filling in the resin, it expands and fills the entire bushing. Minor damage to the outside of the masonry is compensated for at the same time.
To seal the wall duct from the inside, we recommend using the Fill & Seal sealing paste.
Available stock:
- Universally suitable for up to 4 Micro Tubes or Cables
- Foaming along the borehole and on the outer wall ensures absolute tightness
- Gas and waterproof up to 2.0 bar
- Quick and easy installation without special tools
- No complex core hole drilling necessary
- Also suitable for oblique bushings
- Suitable for sealing bores in the most common wall types with seals according to DIN 18533 as well as walls made of waterproof concrete with stress class 1 and 2 (gas and water tight, test pressure 2 bar).
- Complies with DIN 18322 civil engineering works
- High mechanical strength, resistant to earth movements, shocks and vibrations
- Tried and tested over 30 years, installed in many Telekom / FO networks
The FttH (Fiber to the home) multiple wall duct is a gas and watertight wall duct system for up to 4 micro pipes or cables.
The cap with the filling opening is placed firmly on the outside of the building by anchoring in the borehole. Additional screwing is not necessary.
The use of PU expansion resin type 2234 ensures a seal against gas and water. The packaging of the casting resin in a 2-chamber mixing bag contains enough casting resin to ensure an optimal seal. After filling in the resin, it expands and fills the entire bushing. Minor damage to the outside of the masonry is compensated for at the same time.
To seal the wall duct from the inside, we recommend using the Fill & Seal sealing paste.
Technical properties
Dimensions:
Ø 132 x 30 mm
Pipe Dimension:
4x4-8 mm
Pipe Layout:
4x 4-8 mm
Product Family:
House Entry
Sealing:
up to 2 bar
Single Pipes:
4
WIssenswertes zum Thema
