Skip to main content Skip to search Skip to main navigation

8-Port 10/100/1000Mbps + 2-Port SFP Managed Switch

  • 8x 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/MDI-X supported
  • 1x port (Port 8) supports 802.3af/at PoE 48~56V DC in-line power
  • 2x 100/1000Base-X mini-GBIC/SFP slots
 
PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP Managed Desktop Switch specially designed to build a reliable full Gigabit backbone to transmit and forward data to remote network through fiber optic. It provides 8-port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces with dual power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GSD-1002M provides user-friendly but advanced IPv6 / IPv4 management interface and abundant L2 / L4 switching functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure.
  
IPv6 / IPv4 Full-functioned Secure Switch
The GSD-1002M is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data switching and Quality of Service traffic control, Access Control List, network access control and authentication, and Secure Management features to protect building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.
 
Spanning Tree Protocol and Dual Power Input for High Available Network System
The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop protection and dual power input system (PoE In + 12V DC) into customers automation network to enhance system reliability and uptime. In the example below, PoE power has failed with dropped cable and DC power will run hardware failover function automatically to keep powering the switch without any loss.
  
Handheld Size for FTTD Solution
The GSD-1002M provides high-performance edge service and plug-and-play design for FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable and expandable, lower-cost wiring architectures, and long distance capability. The GSD-1002M supports dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be installed in communication closet or major computer room for SMBs.  
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Available stock:
Article number: GSD-1002M
Manufacturer number: GSD-1002M
Manufacturer page: PLANET
EAN: 4711605280082
  • 8x 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/MDI-X supported
  • 1x port (Port 8) supports 802.3af/at PoE 48~56V DC in-line power
  • 2x 100/1000Base-X mini-GBIC/SFP slots
 
PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP Managed Desktop Switch specially designed to build a reliable full Gigabit backbone to transmit and forward data to remote network through fiber optic. It provides 8-port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces with dual power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GSD-1002M provides user-friendly but advanced IPv6 / IPv4 management interface and abundant L2 / L4 switching functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure.
  
IPv6 / IPv4 Full-functioned Secure Switch
The GSD-1002M is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data switching and Quality of Service traffic control, Access Control List, network access control and authentication, and Secure Management features to protect building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.
 
Spanning Tree Protocol and Dual Power Input for High Available Network System
The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop protection and dual power input system (PoE In + 12V DC) into customers automation network to enhance system reliability and uptime. In the example below, PoE power has failed with dropped cable and DC power will run hardware failover function automatically to keep powering the switch without any loss.
  
Handheld Size for FTTD Solution
The GSD-1002M provides high-performance edge service and plug-and-play design for FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable and expandable, lower-cost wiring architectures, and long distance capability. The GSD-1002M supports dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be installed in communication closet or major computer room for SMBs.  
Technical properties
1 GBit Ports:
8
Access Control List:
IPv4/IPv6 IP-based ACL / MAC-based ACL
Basic Management Interfaces:
Web browser / Telnet / SNMP v1, v2cFirmware upgrade by HTTP / TFTP protocol through Ethernet net ...
Case material:
Metal
Certificate:
FCC Part 15 Class A, CE
Design:
Desktop
Dimensions:
191 x 86 x 26 mm
ESD/EMP Protection:
6KV DC
Flow Control:
IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex
IGMP Snooping:
IGMP (v2 / v3) SnoopingIGMP QuerierUp to 256 multicast groups
Jumbo Frame:
10K bytes
LEDs:
System:Power (Green)10/100/1000T RJ45 Interfaces (Port 1 to Port 8):1000Mbps (Orange), LNK/ACT ( ...
Layer2 Port Mirroring:
TX / RX / BothMany-to-1 monitor
Link Aggregation:
IEEE 802.3ad LACP and static trunkSupports 8 groups of 8-port trunk
MAC Address Table:
8K entries
MLD Snooping:
MLD (v1 / v2) Snooping, up to 256 multicast groups
Main Speed:
1 Gbit Copper
Managed:
Managed
Network Ports:
8-Port
Number of Ports:
8 - 15
Operating Conditions:
0°C - +50°C
Operating Humidity:
5 - 95%, non-condensing
PoE Support:
-
Power Consumption:
10.9W / 37.2 BTU
Power Supply:
IEEE 802.3af / at PoE 48V ~ 56V DC in-line power12V DC power adapter
Product Family:
Layer 2/4
QoS:
8 mapping ID to 8 level priority queues - Port number - 802.1p priority- 802.1Q VLAN tag- DSCP f ...
Reset Button:
> 5 sec: Factory default
SFP 100/1000Mbps Ports:
2
SNMP MIBs:
RFC 3635 Ethernet-like MIBRFC 2863 Interface Group MIBRFC 2819 RMON (1, 2, 3, 9)RFC 1493 Bridge MIB
Secure Management Interfaces:
SSH, SSL, SNMP v3
Security Layer2:
IEEE 802.1X – Port-based authenticationBuilt-in RADIUS client to co-operate with RADIUS server ...
Shared Data Buffer:
512 Kilobytes
Spanning Tree Protocol:
STP / RSTP / MSTP
Standards & Protocols:
IEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX/100BASE-FXIEEE 802.3z Gigabit SX/LXIEEE 802.3ab Gigabi ...
Storage Humidity:
5 - 95%, non-condensing
Storage Temperature:
-20°C to 70°C
Switch Architecture:
Store-and-Forward
Switch Fabric:
20Gbps / non-blocking
Switch Throughput:
14.8Mpps
VLAN:
802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs802.1ad Q-in-Q tunnelingVoic ...

WIssenswertes zum Thema

Technologies
FLUKE Patch Cord Component Test vs. GHMT Type Approval: Zwei Prüfungen, zwei Aussagen
Ein einzelnes Messergebnis und eine unabhängige Typprüfung liefern nicht dieselbe Aussage. Erfahren Sie, wie sich FLUKE Patch Cord Component Test und GHMT Type Approval unterscheiden und warum beide Prüfungen unterschiedlich zu bewerten sind.
read more
Distribution
TELTONIKA
Use Case
4G router with an automatic tyre maintenance system
Goodyear relies on the Teltonika RUT951 for its CheckPoint automated tyre analysis system. The industrial 4G router ensures secure and reliable data transmission, thereby supporting the predictive maintenance of vehicle fleets.
read more
Technologies
Our New Brand for Simple Industrial Networking
With SICO, TRIOTRONIK is launching a new in-house brand for industrial networking technology. The focus is on plug-and-play functionality, robust hardware and straightforward networking solutions for applications where reliability is paramount.
read more
Technologies
LIGHTWIN LFS AUTO CLEAVER – Simplifying Fibre Splicing Workflows
Every hand movement counts when splicing. Find out how the new LIGHTWIN LFS AUTO CLEAVER with automatic blade rotation and integrated collection of fibre residues ensures a more efficient workflow.
read more
Technologies
More Structure in the Network Rack with SLIM Patch Cables
A well-organized network cabinet simplifies maintenance, administration, and future expansion. Discover how slim patch cables and precisely matched cable lengths can improve visibility and efficiency throughout your network infrastructure.
read more

TRIOTRONIK
– Networks That Connect

GET IN TOUCH

Netzwerktechnik & Glasfaser
Technische Tiefe statt Bauchladen - spezialisiert auf moderne Netzwerklösungen mit Fokus auf Glasfaser

30 Jahre Erfahrung
Drei Jahrezehnte Know-how - weitergeben in Schulungen der TRIOTRONIK Akademie.

Individuelle Lösungen
Standard reicht nicht? Wir liefern Sonderlösungen - schnell und pragmatisch.

Eigenmarken aus der Praxis
Von Profis entwickelt: praxistauglich, durchdacht und fair kalkuliert.

Persönliche Beratung
Kompetent, verständlich und nahbar - ohne Hotline-Schleifen.

Starke Logistik
25.000 Artikel sofort verfügbar - für planbare, schnelle Projekte.

TRIOTRONIK Pyramidshape