16-Port 10/100/1000Mbps unmanaged Gigabit Ethernet Switch
- 16x10/100/1000BASE-T Gigabit Ethernet ports
- Supports auto MDI/MDI-X function
- Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- Integrated address look-up engine, supporting 8K absolute MAC addresses
- 10K jumbo packet support
- Power Saving ability for Green networking
- IEEE 802.1Q VLAN packet transparency support
- IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
- Hardware based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode, flow control, and auto-negotiation
- Automatic address learning and address aging
- Supports CSMA/CD protocol
- 100~240V AC, 0.3A, 50~60Hz universal power input
- FCC, CE Class A compliant
Cost-Effective Gigabit Solution for Enterprise Backbone and Data Center Networking
PLANET GSW-1601 provides 16 RJ-45 10/100/1000Mbps ports for high-speed network connectivity. It can automatically identify and determine the correct transmission speed and half / full duplex mode of the attached devices with its 16 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-1601 can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers.
High Performance
The GSW-1601 provides high performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 32Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the Flow Control function of the GSW-1601 enables routers and servers directly connect to the Switch for fast and reliable data transfer.
All RJ-45 copper interfaces of the GSW-1601 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Excellent Traffic Transmission
The GSW-1601 supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the GSW-1601 could recognize up to 8K different MAC address. The high data throughput and 32Gbps internal switching fabric makes it ideal for most Gigabit environments, especially when network upgrades to a Gigabit environment.
Available stock:
- 16x10/100/1000BASE-T Gigabit Ethernet ports
- Supports auto MDI/MDI-X function
- Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- Integrated address look-up engine, supporting 8K absolute MAC addresses
- 10K jumbo packet support
- Power Saving ability for Green networking
- IEEE 802.1Q VLAN packet transparency support
- IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
- Hardware based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode, flow control, and auto-negotiation
- Automatic address learning and address aging
- Supports CSMA/CD protocol
- 100~240V AC, 0.3A, 50~60Hz universal power input
- FCC, CE Class A compliant
Cost-Effective Gigabit Solution for Enterprise Backbone and Data Center Networking
PLANET GSW-1601 provides 16 RJ-45 10/100/1000Mbps ports for high-speed network connectivity. It can automatically identify and determine the correct transmission speed and half / full duplex mode of the attached devices with its 16 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-1601 can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers.
High Performance
The GSW-1601 provides high performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 32Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the Flow Control function of the GSW-1601 enables routers and servers directly connect to the Switch for fast and reliable data transfer.
All RJ-45 copper interfaces of the GSW-1601 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Excellent Traffic Transmission
The GSW-1601 supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the GSW-1601 could recognize up to 8K different MAC address. The high data throughput and 32Gbps internal switching fabric makes it ideal for most Gigabit environments, especially when network upgrades to a Gigabit environment.
Technical properties
1 GBit Ports:
16
Certificate:
FCC Part 15 Class A, CE
Design:
19" Rackmountable
Dimensions:
440 x 180 x 45 mm, 1U height
Flow Control:
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Jumbo Frame:
9K
MAC Address Table:
8K entries
Main Speed:
1 Gbit Copper
Managed:
Unmanaged
Network Ports:
16-Port
Number of Ports:
16 - 23
Operating Humidity:
5 - 95% degrees C
PoE Support:
-
Power Consumption:
13W / 44 BTU
Power Supply:
100-240V AC, 0.6A, 50/60Hz
Product Family:
Unmanaged
Standards & Protocols:
IEEE 802.3 Ethernet IEEE 802.3u Fast EthernetIEEE 802.3abGigabit EthernetIEEE 802.3x Full-duplex ...
Switch Architecture:
Store-and-Forward
Switch Fabric:
32Gbps / non-blocking
Switch Throughput:
23.8Mpps
Downloads
Datenblatt_en.pdf
WIssenswertes zum Thema
