Skip to main content Skip to search Skip to main navigation
New

100 GBit QSFP28 LR4, 10km, DFB, LC-Duplex, Singlemode, Enterprise Version

The 100G QSFP28 LR4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four lasers with 1295.5, 1300.0, 1304.5, and 1309.1nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Available stock:
Article number: LWO-QSFP28-LR4
Manufacturer number: LWO-QSFP28-LR4
Manufacturer page: LIGHTWIN OPTICS
EAN: 9120117657605
  • Hot-pluggable QSFP28 MSA form factor
  • Duplex LC receptacle optical interface
  • Transmitter: cooled 4x25Gb/s DML laser
  • Receiver: 4x25Gb/s PIN receiver
  • Compliant with CEI-28G-VSR
  • Single +3.3V power supply
  • Low power dissipation (max: 4.0W)
  • Built in digital diagnostic function
  • Operating case temperature range 0°C to 70°C
Typical usage
  • 100GBASE-LR4
  • InfinibandQDR and DDR interconnects
  • Client-side 100G Telecom connections

The 100G QSFP28 LR4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four lasers with 1295.5, 1300.0, 1304.5, and 1309.1nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.

Technical properties
Bandwidth:
103.125 Gbps
Bandwidth per Lane:
25.78125 Gbps
Communication:
Singlemode
Compatibility:
Universal
Compatiblity w/o special Coding:
-
Compliance Code:
100G QSFP28 LR4
Connector:
LC Duplex
DDM:
Yes
Extinction Ratio:
4 dB
Form Factor:
QSFP28
Lane Count:
4
Laser:
DFB
Max. Distance Fiber:
10 km
Modulation:
NRZ
Operating Conditions:
0°C - +70°C
Operating Humidity:
0 - 85%, non-condensing
Power Consumption max.:
4.0 W
Power Supply:
3.3 V
Product Family:
100 Gbit QSFP28
RX Wavelength:
1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
RX Wavelength (Range):
1294.53 nm - 1296.59 nm, 1299.02 nm - 1301.09 nm, 1303.54 nm - 1305.63 nm, 1308.09 nm - 1310.19 nm
Receiver Type:
PIN
SFP Power Budget:
6.3 dB
Supported Protocols:
IEEE 802.3 100GBASE-LR4, QSFP28 MSA, SFF-8665, SFF-8636
TX Wavelength:
1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
TX Wavelength (Range):
1294.53 nm - 1296.59 nm, 1299.02 nm - 1301.09 nm, 1303.54 nm - 1305.63 nm, 1308.09 nm - 1310.19 nm
Warranty:
3 Years

WIssenswertes zum Thema

Technologies
FLUKE Patch Cord Component Test vs. GHMT Type Approval: Zwei Prüfungen, zwei Aussagen
Ein einzelnes Messergebnis und eine unabhängige Typprüfung liefern nicht dieselbe Aussage. Erfahren Sie, wie sich FLUKE Patch Cord Component Test und GHMT Type Approval unterscheiden und warum beide Prüfungen unterschiedlich zu bewerten sind.
read more
Distribution
TELTONIKA
Use Case
4G router with an automatic tyre maintenance system
Goodyear relies on the Teltonika RUT951 for its CheckPoint automated tyre analysis system. The industrial 4G router ensures secure and reliable data transmission, thereby supporting the predictive maintenance of vehicle fleets.
read more
Technologies
Our New Brand for Simple Industrial Networking
With SICO, TRIOTRONIK is launching a new in-house brand for industrial networking technology. The focus is on plug-and-play functionality, robust hardware and straightforward networking solutions for applications where reliability is paramount.
read more
Technologies
LIGHTWIN LFS AUTO CLEAVER – Simplifying Fibre Splicing Workflows
Every hand movement counts when splicing. Find out how the new LIGHTWIN LFS AUTO CLEAVER with automatic blade rotation and integrated collection of fibre residues ensures a more efficient workflow.
read more
Technologies
More Structure in the Network Rack with SLIM Patch Cables
A well-organized network cabinet simplifies maintenance, administration, and future expansion. Discover how slim patch cables and precisely matched cable lengths can improve visibility and efficiency throughout your network infrastructure.
read more

TRIOTRONIK
– Networks That Connect

GET IN TOUCH

Netzwerktechnik & Glasfaser
Technische Tiefe statt Bauchladen - spezialisiert auf moderne Netzwerklösungen mit Fokus auf Glasfaser

30 Jahre Erfahrung
Drei Jahrezehnte Know-how - weitergeben in Schulungen der TRIOTRONIK Akademie.

Individuelle Lösungen
Standard reicht nicht? Wir liefern Sonderlösungen - schnell und pragmatisch.

Eigenmarken aus der Praxis
Von Profis entwickelt: praxistauglich, durchdacht und fair kalkuliert.

Persönliche Beratung
Kompetent, verständlich und nahbar - ohne Hotline-Schleifen.

Starke Logistik
25.000 Artikel sofort verfügbar - für planbare, schnelle Projekte.

TRIOTRONIK Pyramidshape