10 Gbit SFP+, 850nm, 300m, DDM, LC-Duplex, Multimode, HP Aruba
Lighwin‘s LWO-SFPP-SR-HPE SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over multi-mode fiber. The module consists of 850nm VCSEL Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
LWO-SFPP-SR-HPE transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
- Up to 11.3Gb/s data links
- 850nm VCSEL laser and PIN receiver
- Up to 300m on 50/125μm MMF
- HP Aruba Coding
- Hot-pluggable SFP+ footprint
- Duplex LC/UPC type pluggable optical interface
- RoHS-10 compliant and leadfree
- Support Digital Monitoring interface
- Compliant with SFF+MSA and SFF-8472
- Single +3.3V power supply
- Metal enclosure, for lower EMI
- Meet ESD requirements, resist
- 8KV direct contact voltage
- Case operating temperature:
- Commercial: 0°C to +70°C
- Industrial: -40°C to +85°C
- 10GBASE-SR/SW & 10G Ethernet
- SDH STM64
- Other Optical Links
Lighwin‘s LWO-SFPP-SR-HPE SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over multi-mode fiber. The module consists of 850nm VCSEL Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
LWO-SFPP-SR-HPE transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
WIssenswertes zum Thema
