Wirewin CAT6A Securelock Patch Cord, S/FTP, LSZH, grey with black connector
The special Wirewin Securlock plug prevents unintentional unplugging of the patchcord connection. This will increase your network security on the lowest layer, the cabling layer. You need to use a special key to open the connector (not included with the cable).
Wirewin® patch cables of category 6A comply with the values according to ISO / IEC 11801 Ed.2. This allows a data transfer of 10 GBit / s. Category 6A is specified with 500MHz. The cable for these patch cables is double shielded. Each pair is in its own foil shielding and above is again a braid shielding. This structure is often referred to as PIMF (pairs in metal foil / pairs in metal foil) or as S / FTP. The jacket of these cables is made of halogen-free material and therefore is flame-resistant. All Wirewin® KAT6A patch cables are equipped with a lifetime warranty!
Article number:
PKW-SL-SFTP-KAT6A 0.3 SW
Manufacturer number:
PKW-SL-SFTP-KAT6A 0.3 SW
Manufacturer page:
WIREWIN
EAN:
9120072488382
More variants:
Wirewin CAT6A Securelock Patch Cord, S/FTP, LSZH, grey with black connector
- Category 6A patchcable
- Shield: S/FTP shielded
- 4- pairs twisted
- Wires: AWG26 100% copper
- 50 µm Gold coating on the Connector
- Outer Diameter: 6.0 mm
- Coating: LSZH
- DSX 8000 Fluke Channel tested (ISO/IEC channel)
Typical usage
- Increases network security
- Ideal for critical connections that should not be unplugged under any circumstances
- For server connections, NAS, storage or central router connections but also for all other important network ports
- Prevents unintentional disconnetions
The special Wirewin Securlock plug prevents unintentional unplugging of the patchcord connection. This will increase your network security on the lowest layer, the cabling layer. You need to use a special key to open the connector (not included with the cable).
Wirewin® patch cables of category 6A comply with the values according to ISO / IEC 11801 Ed.2. This allows a data transfer of 10 GBit / s. Category 6A is specified with 500MHz. The cable for these patch cables is double shielded. Each pair is in its own foil shielding and above is again a braid shielding. This structure is often referred to as PIMF (pairs in metal foil / pairs in metal foil) or as S / FTP. The jacket of these cables is made of halogen-free material and therefore is flame-resistant. All Wirewin® KAT6A patch cables are equipped with a lifetime warranty!
Technical properties
AWG-size:
26.0
Anti-kink sleeve:
moulded-on
Cable Constuction:
4x2xAWG26/7
Cable Length:
0.3 m
Cable construction:
4x2
Category:
CAT.6A (IEC)
Certificate:
0.3
Coating:
LSZH
Color anti-kink sleeve:
Black
Color outer sheath:
Grey
Colour:
Schwarz
Fire retardant version:
Yes
Halogen free according to EN IEC 60754-1:
Yes
Halogen free according to EN IEC 60754-2:
Yes
Halogen free according to EN IEC 60754-3:
Yes
Locking lever:
Yes
Oil resistant according to EN IEC 60811-404:
No
Pin assignment:
1:1
Pining:
TIA/EIA 568 B
Product Family:
Secure Lock Series
Shield:
S/FTP shielded
Type of Cable:
S/FTP
Type of Connector Connection 1:
RJ45 8(8)
Type of Connector Connection 1:
RJ45 8(8)
WIssenswertes zum Thema
