Industrial Patch Cord KAT6A, UV resistance PUR heath, S/FTP, orange
Wirewin® Industrial Category 6A Patch Cords comply with the values specified in ISO/IEC 11801 Ed.2. This enables data transmission at 10 Gbit/s. Category 6A is specified at 500 MHz. The cable is double-shielded. Each pair is enclosed in its own foil shielding, which is covered by a braided shield. This design is often referred to as PIMF (Pairs in Metal Foil) or S/FTP. The sheath of these cables is made of flexible and UV-resistant PUR material and offers protection against weather, moisture, and mechanical stress. This makes the patch cables suitable for use in industrial environments.
The RJ45 connector with gold-plated contacts and a grommet to protect the jack from mechanical damage also allows for easy pressing. Power over Ethernet (PoE) transmission is also possible. All Wirewin® KAT6A Industrial Patch Cords come with a lifetime warranty!
- Category 6A patch cord
- For 10 Gigabit data transmission
- Shielding: S/FTP shielded
- RJ45 connector with jack protection sleeve
- 4 twisted pairs
- Cable thickness: AWG26/7
- Flexible PUR outer jacket, UV-resistant, weather protection, moisture protection, and increased mechanical strength
- Complies with European standard EN 14582:2016 (determination of halogens, sulfur, and phosphorus)
- Jacket color: Orange
- Outer diameter: 6 mm
- Temperature range: -40°C to 80°C
- PoE-capable
- Tested with Fluke cable certifier in channel test
- 8 different lengths
- Industrial patch cords are used where UV resistance, weather protection, moisture protection, and increased mechanical resilience are required
- Connection of components located outdoors (e.g., IP cameras)
- Applications in industry or manufacturing where Ethernet connections are required
- PoE connection of outdoor WLAN hotspots, traffic monitoring systems, and toll systems
Wirewin® Industrial Category 6A Patch Cords comply with the values specified in ISO/IEC 11801 Ed.2. This enables data transmission at 10 Gbit/s. Category 6A is specified at 500 MHz. The cable is double-shielded. Each pair is enclosed in its own foil shielding, which is covered by a braided shield. This design is often referred to as PIMF (Pairs in Metal Foil) or S/FTP. The sheath of these cables is made of flexible and UV-resistant PUR material and offers protection against weather, moisture, and mechanical stress. This makes the patch cables suitable for use in industrial environments.
The RJ45 connector with gold-plated contacts and a grommet to protect the jack from mechanical damage also allows for easy pressing. Power over Ethernet (PoE) transmission is also possible. All Wirewin® KAT6A Industrial Patch Cords come with a lifetime warranty!
WIssenswertes zum Thema
