FTTH Single Wall Penetration + 90° bend Pipe Entry
- Universally suitable for micro tubes and cables
- Foaming along the borehole and on the outer wall ensures absolute tightness
- Gas and waterproof up to 2.0 bar
- Quick and easy installation without special tools
- No complex core hole drilling necessary
- Also suitable for oblique bushings
- Suitable for sealing bores in the most common wall types with seals according to DIN 18533 as well as walls made of waterproof concrete with stress class 1 and 2 (gas and water tight, test pressure 2 bar).
- Complies with DIN 18322 civil engineering works
- High mechanical strength, resistant to earth movements, shocks and vibrations
- Tried and tested over 30 years, installed in many Telekom / FO networks
The FttH (Fiber to the home) is a gas and watertight wall duct system for micro pipes and cables.
The cap with the filling opening is placed firmly on the outside of the building by anchoring in the borehole. Fastening with additional screwing is not necessary.
By using the PU expansion resin, a seal against gas and water is guaranteed. The packaging of the casting resin contains a sufficient amount to ensure an optimal seal. After filling the resin, it foams and fills the entire bushing. The resin is cured in no time. Minor damage to the outside of the masonry is compensated for at the same time.
To seal the wall duct from the inside, we recommend using the MD + sealing paste or our above-ground house entry, the FttH 90 ° entry element. It has an integrated bending radius for the safe bending of FttH micro tubes or cables and thus enables the fibers to be blown in even after installation.
Available stock:
- Universally suitable for micro tubes and cables
- Foaming along the borehole and on the outer wall ensures absolute tightness
- Gas and waterproof up to 2.0 bar
- Quick and easy installation without special tools
- No complex core hole drilling necessary
- Also suitable for oblique bushings
- Suitable for sealing bores in the most common wall types with seals according to DIN 18533 as well as walls made of waterproof concrete with stress class 1 and 2 (gas and water tight, test pressure 2 bar).
- Complies with DIN 18322 civil engineering works
- High mechanical strength, resistant to earth movements, shocks and vibrations
- Tried and tested over 30 years, installed in many Telekom / FO networks
The FttH (Fiber to the home) is a gas and watertight wall duct system for micro pipes and cables.
The cap with the filling opening is placed firmly on the outside of the building by anchoring in the borehole. Fastening with additional screwing is not necessary.
By using the PU expansion resin, a seal against gas and water is guaranteed. The packaging of the casting resin contains a sufficient amount to ensure an optimal seal. After filling the resin, it foams and fills the entire bushing. The resin is cured in no time. Minor damage to the outside of the masonry is compensated for at the same time.
To seal the wall duct from the inside, we recommend using the MD + sealing paste or our above-ground house entry, the FttH 90 ° entry element. It has an integrated bending radius for the safe bending of FttH micro tubes or cables and thus enables the fibers to be blown in even after installation.
Technical properties
Pipe Dimension:
1x10–12 mm
Single Pipes:
1
WIssenswertes zum Thema
