CAT6 Light Patch Cord round, U/UTP, Ø 2,8mm, grey
The LIGHTpatchcords from the trademark SLIM® are the solution for many problems of structured cabling. Even if they look quite similar to a usual copper patchcable, they reach a category 6 performance and are suitable to all 10BASE-T-, 100BASE-TX- und 1000BASE-T applications, including gigabit ethernet. 3 LIGHTpatchcords do have the same diameter as a usual category 6 copper patchcord. Despite the extremely thin design, the cable has a twisting of the individual wire pairs. In addition, it has a wide, flexible latch protection as well as a practical length print on both ends and supports Power over Ethernet (PoE IEEE802.3af).
Article number:
PKW-LIGHT-K6 2.0
Manufacturer number:
PKW-LIGHT-K6 2.0
Manufacturer page:
SLIM
EAN:
9120064015565
More variants:
CAT6 Light Patch Cord round, U/UTP, Ø 2,8mm, grey
- Category 6 patchcord
- Tested with Fluke Cable-Certifier in Channel Test
- GHMT certified
- Shield: U/UTP unshielded
- Colour: Grey, similar RAL7032
- 4- pairs twisted
- Wires: AWG36 100% copper
- Coating: PVC
- 9 different length
- New innovative boot design
Typical usage
Typical application areas for the LIGHTpatchcords:
- Overfilled server or network cabinets or cable channels
- Telephone system or switches with high port densities. With very short cables, you could easily patch from switch to switch or switch to panel without cable routing
- Connection of VoIP telephones because they are extremely flexible and therefore not so difficult to lay on a desk
- Applications in industry and manufacturing where ethernet connections are required, but only little space is available
- As a patch cable in the notebook bag for technicians and field staff
- In the private environment to lay a patch cable under the carpet or the edge strip
The LIGHTpatchcords from the trademark SLIM® are the solution for many problems of structured cabling. Even if they look quite similar to a usual copper patchcable, they reach a category 6 performance and are suitable to all 10BASE-T-, 100BASE-TX- und 1000BASE-T applications, including gigabit ethernet. 3 LIGHTpatchcords do have the same diameter as a usual category 6 copper patchcord. Despite the extremely thin design, the cable has a twisting of the individual wire pairs. In addition, it has a wide, flexible latch protection as well as a practical length print on both ends and supports Power over Ethernet (PoE IEEE802.3af).
Technical properties
AWG-size:
36.0
Anti-kink sleeve:
moulded-on
Cable Constuction:
4x2xAWG36/7
Cable Length:
2.0 m
Cable Structure:
Ø 2,8mm
Cable construction:
4x2
Category:
CAT.6
Certificate:
GHMT certified
Coating:
PVC
Color anti-kink sleeve:
Grey
Colour:
Grau
Fire retardant version:
No
Halogen free according to EN IEC 60754-1:
No
Halogen free according to EN IEC 60754-2:
No
Halogen free according to EN IEC 60754-3:
No
Locking lever:
Yes
Oil resistant according to EN IEC 60811-404:
No
Pin assignment:
1:1
Pining:
TIA/EIA 568 B
Product Family:
Light Series (Round)
Shield:
U/UTP unshielded
Type of Cable:
U/UTP
Type of Connector Connection 1:
RJ45 8(8)
Type of Connector Connection 1:
RJ45 8(8)
WIssenswertes zum Thema
