Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen

netFiber 9 Outdoor Switch, 4x SFP+, 5x SFP, 1x 1Gb, PoE-In

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

Produkt Anzahl: Gib den gewünschten Wert ein oder benutze die Schaltflächen um die Anzahl zu erhöhen oder zu reduzieren.
Stk
Lagerbestand:
Artikelnummer: CRS310-1G-5S-4S+OUT
Herstellernummer: CRS310-1G-5S-4S+OUT
Herstellerseite: MIKROTIK
  • 4x SFP+ Ports
  • 5x SFP Ports
  • 1x 10/100/1000 Ethernet Ports
  • License level 5
  • PoE In
  • Multiple Powering Options

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

Technische Daten
Hauptgeschwindigkeit:
1 Gbit Fiber
Betriebssystem:
RouterOS
PoE Standard:
IEEE 802.3 af/at
Portanzahl:
8 - 15
PoE Support:
Ja
Managed:
Managed
Bauform:
Desktop
Abmessungen:
304 x 212 x 71 mm
1 GBit Ports, PoE-In:
1
Arbeitsspeicher / RAM:
256 MB DDR3
Betriebstemperatur:
-40°C - +70°C
CPU Kerne:
1
CPU Nominal Frequenz:
800 MHz
Chipsatz:
98DX226S
Lizenz Level:
5
Prozessor:
98DX226S
SFP+ Ports:
4
SFP Ports:
5
Stromversorgung:
18 - 57V DC, PoE
Zertifikate / Zulassungen:
CD, FCC, IC
Ähnliche Artikel
RB960PGS-PB
Produkt Anzahl: Gib den gewünschten Wert ein oder benutze die Schaltflächen um die Anzahl zu erhöhen oder zu reduzieren.
Stk

WIssenswertes zum Thema

Technologies
FLUKE Patch Cord Component Test vs. GHMT Type Approval: Zwei Prüfungen, zwei Aussagen
Ein einzelnes Messergebnis und eine unabhängige Typprüfung liefern nicht dieselbe Aussage. Erfahren Sie, wie sich FLUKE Patch Cord Component Test und GHMT Type Approval unterscheiden und warum beide Prüfungen unterschiedlich zu bewerten sind.
weiterlesen
Distribution
TELTONIKA
Use Case
4G-Router mit autom. System zur Reifenwartung
Goodyear setzt bei seinem automatisierten Reifenanalyse-System CheckPoint auf den Teltonika RUT951. Der industrielle 4G-Router sorgt für eine sichere und zuverlässige Datenübertragung und unterstützt so die vorausschauende Wartung von Fahrzeugflotten.
weiterlesen
Technologies
SICO: Unsere neue Eigenmarke für unkomplizierte Netzwerklösungen
Mit SICO präsentiert TRIOTRONIK eine neue Eigenmarke für industrielle Netzwerktechnik. Der Fokus: Plug & Play, robuste Hardware und unkomplizierte Netzwerklösungen für Anwendungen, bei denen Zuverlässigkeit im Vordergrund steht.
weiterlesen
Technologies
Cleaven neu gedacht: Wenn kleine Handgriffe einen Unterschied machen
Beim Spleißen zählt jeder Handgriff. Erfahren Sie, wie der neue LIGHTWIN LFS AUTO CLEAVER mit automatischer Klingenrotation und integrierter Sammlung von Faserresten für einen effizienteren Arbeitsablauf sorgt.
weiterlesen
Technologies
Mehr Ordnung im Netzwerkschrank mit der richtigen Kabellänge
Ein aufgeräumter Netzwerkschrank erleichtert Wartung, Verwaltung und Erweiterungen. Erfahren Sie, wie schlanke Patchkabel, passende Kabellängen und Farbcodierungen zu mehr Übersicht in der Netzwerkinfrastruktur beitragen.
weiterlesen

TRIOTRONIK - Netzwerke die verbinden.

JETZT KONTAKT AUFNEHMEN

DISTRIBUTION
Von aktiver Netzwerktechnik bis hin zu passiven Komponenten bieten wir ein abgestimmtes Portfolio für professionelle Infrastrukturprojekte.

Über 30 Jahre Erfahrung
Seit mehr als drei Jahrzehnten begleiten wir Partner mit technischer Kompetenz, passenden Produkten und praxisnaher Weiterbildung.

ACADMEY
Mit der TRIOTRONIK Academy verbinden wir theoretisches Fachwissen mit praktischer Anwendung.

Aus der Praxis entwickelt
Unsere Eigenmarken entstehen aus den Anforderungen des Marktes und der täglichen Praxis.

Persönliche Beratung
Unsere Experten begleiten Sie von der Beratung bis zur technischen Unterstützung.

Leistungsfähige Logistik
Hohe Verfügbarkeit und kurze Lieferzeiten durch mehr als 10.000 lagernde Artikel.

TRIOTRONIK Pyramide