Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen

ICF-1150 Serie, Industrie RS-232/422/485 zu Fiber Konverter

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

Three-Way Communication:
The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Produkt Anzahl: Gib den gewünschten Wert ein oder benutze die Schaltflächen um die Anzahl zu erhöhen oder zu reduzieren.
Stk
Lagerbestand:
Artikelnummer: ICF-1150I-M-ST-IEX
Herstellernummer: ICF-1150I-M-ST-IEX
Herstellerseite: MOXA
  • 3-way communication: RS-232, RS-422/485, and fiber
  • Rotary switch to change the pull high/low resistor value
  • Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
  • -40 to 85°C wide-temperature range models available
  • C1D2, ATEX, and IECEx certified for harsh industrial environments

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

Three-Way Communication:
The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Technische Daten
Industrial:
Ja
Schnittstellen:
RS-232

WIssenswertes zum Thema

Technologies
Spleißbox vs. PRETERM BOX: Zwei Installationswege, drei Lösungen
Spleißbox und PRETERM BOX erfüllen nicht denselben Zweck. Erfahren Sie, wie sich beide 19"-Lösungen unterscheiden und welche Komponente für Ihren jeweiligen Installationsweg die richtige Wahl ist.
weiterlesen
TRIOTRONIK
Ein neuer Standort für die Zukunft von TRIOTRONIK
Mit dem offiziellen Spatenstich startet eines der bedeutendsten Projekte der Unternehmensgeschichte von TRIOTRONIK. In Preding bei Weiz entsteht ein neues Netzwerktechnik-Kompetenzzentrum mit Raum für Wachstum, Innovation und neue Möglichkeiten.
weiterlesen
Technologies
FLUKE Patch Cord Component Test vs. GHMT Type Approval: Zwei Prüfungen, zwei Aussagen
Ein einzelnes Messergebnis und eine unabhängige Typprüfung liefern nicht dieselbe Aussage. Erfahren Sie, wie sich FLUKE Patch Cord Component Test und GHMT Type Approval unterscheiden und warum beide Prüfungen unterschiedlich zu bewerten sind.
weiterlesen
Distribution
TELTONIKA
Use Case
4G-Router mit autom. System zur Reifenwartung
Goodyear setzt bei seinem automatisierten Reifenanalyse-System CheckPoint auf den Teltonika RUT951. Der industrielle 4G-Router sorgt für eine sichere und zuverlässige Datenübertragung und unterstützt so die vorausschauende Wartung von Fahrzeugflotten.
weiterlesen
Technologies
SICO: Unsere neue Eigenmarke für unkomplizierte Netzwerklösungen
Mit SICO präsentiert TRIOTRONIK eine neue Eigenmarke für industrielle Netzwerktechnik. Der Fokus: Plug & Play, robuste Hardware und unkomplizierte Netzwerklösungen für Anwendungen, bei denen Zuverlässigkeit im Vordergrund steht.
weiterlesen

TRIOTRONIK - Netzwerke die verbinden.

JETZT KONTAKT AUFNEHMEN

DISTRIBUTION
Von aktiver Netzwerktechnik bis hin zu passiven Komponenten bieten wir ein abgestimmtes Portfolio für professionelle Infrastrukturprojekte.

Über 30 Jahre Erfahrung
Seit mehr als drei Jahrzehnten begleiten wir Partner mit technischer Kompetenz, passenden Produkten und praxisnaher Weiterbildung.

ACADMEY
Mit der TRIOTRONIK Academy verbinden wir theoretisches Fachwissen mit praktischer Anwendung.

Aus der Praxis entwickelt
Unsere Eigenmarken entstehen aus den Anforderungen des Marktes und der täglichen Praxis.

Persönliche Beratung
Unsere Experten begleiten Sie von der Beratung bis zur technischen Unterstützung.

Leistungsfähige Logistik
Hohe Verfügbarkeit und kurze Lieferzeiten durch mehr als 10.000 lagernde Artikel.

TRIOTRONIK Pyramide