• 3-in-1-Router: Integrierter Router, PoE-Switch und Omada-Controller.
• Professionelle Hardware: Dual-Core-1,2-GHz-CPU mit 1 GB DDR3-Speicher bietet hervorragende Leistung für bis zu 12 × Gigabit-Ports.
• Bis zu 4 × WAN-Ports:
  • Ausgestattet mit 2 × Gigabit-SFP-WAN/LAN-Ports
  • 1 × Gigabit-RJ45-WAN-Port
  • 1 × Gigabit-RJ45-WAN/LAN-Port.
• 110 W PoE-Budget: 8 × 802.3at/af-konforme PoE+ RJ45-LAN-Ports ergeben eine Gesamtstromversorgung von 110 W*.
• Zentralisierte Verwaltung: Cloud-Zugriff und die Omada-App bieten Komfort und einfache Verwaltung.
• Hochsicheres VPN: Unterstützt IPsec-VPN-, OpenVPN- und L2TP/PPTP-VPN-Verbindungen.
• Einfache Installation: Lüfterloses und kompaktes Design für Tisch- und Wandmontage

Integrierter PoE+-Switch
Dedizierte 8× PoE+-Ports (110 W Gesamt-PoE-Leistungsbudget*) für PoE-unterstützte Geräte wie Access Points, IP-Kameras und IP-Telefone, wodurch die Infrastrukturkosten für kleine Unternehmen gesenkt werden. Eingebetteter Omada-SDN-Controller
Mit dem integrierten Omada SDN-Controller müssen Sie keine zusätzlichen Verwaltungsgeräte mit ER7212PC konfigurieren. Sie benötigen nur ein Gerät, um andere Geräte in großen Mengen zu verwalten und zu aktualisieren. *PoE-Budgetberechnungen basieren auf Labortests. Das tatsächliche PoE-Leistungsbudget wird nicht garantiert und variiert aufgrund von Endgerätbeschränkungen und Umgebungsfaktoren.
§ER7212PC kann als VPN-Client arbeiten und sich mit bis zu 10 VPN-Servern verbinden
Bilder und Informationen dienen nur als Referenz. Die tatsächlichen Produkte können abweichen.

• 24x 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3af/at PoE+ injector
• 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• RS-232 RJ45 console interface for switch basic management and setup   

Wireless LAN AP Management:

• Dashboard: provides at-a-glance view of system and wireless network status
• AP Discovery: one key to discover the managed APs on the managed LAN
• Customized Profile: allows multiple wireless profiles creation and maintenance
• Auto Provision: multi-AP provisioning with one click
• Cluster Management: simplifies high-density AP management
• Zone Plan: optimizes AP deployment with actual signal coverage
• Analysis: real-time AP status monitoring
• Scalability: free system upgrade and AP firmware bulk upgrade capability 

Power over Ethernet:

• Up to 24 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
  
  • PoE Port Status monitoring
  • Total PoE power budget control
  • Over temperature protection
  • PoE usage threshold
  • Temperature threshold
  • Per port PoE function enable/disable
  • PoE Port Power feeding priority
  • Per PoE port power limit
  • PD classification detection
  • Sequence port PoE 

Layer 2 Features:

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
  
  • Broadcast/Multicast/Unknown unicast
• Supports VLAN
  
  • IEEE 802.1Q tagged VLAN
  • Up to 255 VLANs groups, out of 4095 VLAN IDs
  • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
  • Private VLAN Edge (PVE)
  • Protocol-based VLAN
  • MAC-based VLAN
  • Voice VLAN
• Supports Spanning Tree Protocol
  
  • IEEE 802.1D Spanning Tree Protocol
  • IEEE 802.1w Rapid Spanning Tree Protocol
  • EEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
  • BPDU Guard
• Supports Link Aggregation
  
  • 802.3ad Link Aggregation Control Protocol (LACP)
  • Cisco ether-channel (static trunk)
  • Maximum 14 trunk groups, up to 4 ports per trunk group
  • Up to 80Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching) 

Layer 3 IP Routing Features:

• Supports maximum 128 static routes and route summarization
• IP dynamic routing protocol supports OSPFv2
• Routing interface provides per VLAN routing mode  

Quality of Service:

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
  
  • IEEE 802.1p CoS
  • TOS/DSCP/IP Precedence of IPv4/IPv6 packets
  • IP TCP/UDP port number
  • Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic policing on the switch port
• DSCP remarking 

Multicast:

• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• Multicast VLAN Registration (MVR) support 

Security:

• Authentication
  
  • IEEE 802.1x Port-based/MAC-based network access authentication
  • Built-in RADIUS client to co-operate with the RADIUS servers
  • TACACS+ login users access authentication
  • RADIUS/TACACS+ users access authentication
• Access Control List
  
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder 

Management:

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
  
  • Console/Telnet Command Line Interface
  • 2.4” inch LCD touch screen
  • Web switch management
  • SNMP v1, v2c, and v3 switch management
  • SSH/SSL secure access
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
  • Firmware upload/download via HTTP/TFTP
  • Reset button for system reboot or reset to factory default
  • Dual Images
• DHCP Relay
• DHCP Option82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
  • ICMPv6/ICMPv4 Remote Ping
  • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events) 
• SNMP trap for interface Linkup and Linkdown notification
• System Log
• PLANET Smart Discovery Utility for deployment management