SHOP

Video-Sicherheits-Systeme Zubehör

Hersteller, Hikvision - 302701858
DS-1471ZJ-155 - Hängebefestigung / Deckenhalterung für Dome Kamera, 565mm
Preis auf Anfrage
  • Aluminum alloy with surface spray treatment
  • Easy to install

Note:
  • The mount should be installed on the flat surface.
  • Waterproof rubber is necessary for outdoor application.
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera and the mount.
  • The mount’s maximum load capacity is 3 Kg (6.6 lb.).
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701859
DS-1473ZJ-155 - Wandmontage für Dome Kamera, Ø 155 × 183.5 × 240 mm
Preis auf Anfrage
  • Aluminiumlegierung mit Oberflächenspray-Behandlung
  • Die Kappe erleichtert die Installation
  • Wasserfestes Design
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701860
DS-1475ZJ-SUS - Vertikale Masthalterung, Hik Weiss, rostfreier Stahl
Preis auf Anfrage

Anwendung:
Masthalterung
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701861
DS-1476ZJ-SUS - Eckmontage (Corner Mount), 250 x 126 x 105mm
Preis auf Anfrage

Anwendung:
Eckmontage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701862
DS-1471ZJ-135 - Hängebefestigung / Deckenhalterung für Dome Kamera, 565 mm
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701863
DS-1473ZJ-135 - Wandbefestigung für Dome Kamera
Preis auf Anfrage
  • Alloy with surface spray treatment
  • The cable hole design facilitates cable routing
  • The cap design facilitates the installation

Note:
  • The mount should be installed on a flat surface.
  • The waterproof rubber is necessary for the outdoor application.
  • The wall should be capable of supporting at least 3 times as much as the total weight of the camera, and the mount.
  • The maximum load capacity of the mount is 3 kg (6.6 lb.).
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701868
DS-1667ZJ-P - Halterung für hängende Deckenmontage, Ø 200 x 1500-2500 mm
Preis auf Anfrage
  • Verzinkter Stahl mit Oberflächenbehandlung
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Kamera
  • Die Halterung kann zwischen 1500 mm und 2500 mm eingestellt werden
  Hinweise:
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Die Abdichtungsmaßnahmen sind für die Außenanwendung erforderlich
  • Die Wand muss mindestens das 3-fache des Gesamtgewichts von Kamera und Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701870
DS-1662ZJ-P - Halterung für hängende Deckenmontage, Ø 116.5 x 500 mm
Preis auf Anfrage
  • Aluminum alloy with surface spray treatment
  • Applies to both indoor conditions and outdoor conditions
  Notes
  • The mount should be installed on the flat surface
  • The waterproofing measures are necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera and the mount
  • The mount’s maximum load capacity is 10 kg (22 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701881
DS-1707ZJ-Y - Wandhalterung für explosionsgeschütze Box/Bullet/Zoom Kamera
Preis auf Anfrage
  • SUS316L
  • Stainless steel
  • Waterproof design

Notes:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 8 times as much as the total weight of the camera and the mount
  • The mount’s maximum load capacity is 50 Kg (110 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701921
DS-2665ZJ-P - Halterung für Mast / Säulenkopf, Schwenkwinkel 60°
Preis auf Anfrage
  • Plastic with surface spray treatment
  • Install the mount on pole, or column top
  • Adjustable pan angle for 60°
  • Applies to target capture camera
  Notes:
  • The mount should be installed on the flat surface
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 5 kg (11 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701922
DS-1603ZJ-Pole-P - Masthalterung vertikal für PanoVu Kamera
Preis auf Anfrage
  • Aluminum alloy, steel, and stainless steel with surface spray treatment
  • The hook for safety rope facilitates camera’s installation
  • Adjustable diameter from 67 mm to 127 mm
  • Applies to both indoor conditions, and outdoor conditions
  Notes:
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera and the mount
  • The mount’s maximum load capacity is 20 kg (44 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701932
DS-1660ZJ-P - Wandhalterung für Dome Kamera
Preis auf Anfrage
  • Aluminum alloy with surface spray treatment
  • Install the mount on the edge of the wall
  Notes:
  • The mount should be installed on the flat surface
  • The waterproofing measures are necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera and the mount
  • The mount’s maximum load capacity is 10 kg (22 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701933
DS-1604ZJ-BOX-POLE-P - Vertikale Masthalterung für Speed Dome mit Junction Box
Preis auf Anfrage
  • Vertikale Masthalterung mit Anschlussdose / Junction Box
  • Aluminiumlegierung und Stahl mit Oberflächenbehandlung
  • Einstellbarer Durchmesser von 100 mm bis 200 mm
  • Bodenauslass und Hinterauslass
  • Platzierung des Netzadapter (AC 24 V, 3 A) in der Anschlussdose möglich
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Speed Dome
   Hinweise
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Wasserdichter Gummi ist für die Außenanwendung erforderlich
  • Die Wand muss mindestens dreimal so viel wie das Gesamtgewicht des Speed Dome und der Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701934
DS-1604ZJ-BOX-CORNER-P - Eckhalterung für Speed Dome mit Junction Box
Preis auf Anfrage
  • Eckhalterung mit der Anschlussdose
  • Aluminiumlegierung und Stahlmaterial mit Oberflächenbehandlung
  • Unterstützt den unteren Ausgang und den hinteren Ausgang
  • Platzierung des Netzadapter (AC 24 V, 3 A) in der Anschlussdose möglich
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Speed Dome
  Hinweise
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Wasserdichter Gummi ist für die Außenanwendung erforderlich
  • Die Wand muss mindestens dreimal so viel wie das Gesamtgewicht des Speed Dome und der Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701935
DS-1604ZJ-BOX-P - Wandhalterung für Speed Dome mit Junction Box
Preis auf Anfrage
  • Wandhalterung mit Anschlussdose / Junction Box
  • Aluminiumlegierungsmaterial mit Oberflächenspraybehandlung
  • Unterstützt den unteren Ausgang und den hinteren Ausgang
  • Platzierung des Netzadapter (AC 24 V, 3 A) in der Anschlussdose möglich
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Speed Dome
  Hinweise
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Wasserdichter Gummi ist für die Außenanwendung erforderlich
  • Die Wand muss mindestens dreimal so viel wie das Gesamtgewicht des Speed Dome und der Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701936
DS-1604ZJ-CORNER-P - Eckhalterung für Speed Dome
Preis auf Anfrage
  • Eckhalterung mit der Anschlussdose
  • Aluminiumlegierung und Stahlmaterial mit Oberflächenbehandlung
  • Wasserdichtes Design
  • Unterstützt den unteren Ausgang und den hinteren Ausgang
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Speed Dome
  Hinweise
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Wasserdichter Gummi ist für die Außenanwendung erforderlich
  • Die Wand muss mindestens dreimal so viel wie das Gesamtgewicht des Speed Dome und der Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701937
DS-1604ZJ-Pole-P - Vertikale Masthalterung für Speed Dome
Preis auf Anfrage
  • Befestigungshalterung für den vertikalen Mast mit der Anschlussdose
  • Aluminiumlegierung und Stahlmaterial mit Oberflächenbehandlung
  • Einstellbarer Durchmesser von 67 mm bis 127 mm
  • Unterstützt den unteren Ausgang und den hinteren Ausgang
  • Der Haken für das Sicherheitsseil erleichtert die Installation der Speed Dome
  Hinweise
  • Die Halterung sollte auf der flachen Oberfläche installiert werden
  • Wasserdichter Gummi ist für die Außenanwendung erforderlich
  • Die Wand muss mindestens dreimal so viel wie das Gesamtgewicht des Speed Dome und der Halterung tragen können
  • Die maximale Tragfähigkeit der Halterung beträgt 10 kg
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701950
DS-1294ZJ-TRL - Wandhalterung für Dome Kamera, 161.1 x 241.5 x 80 mm
Preis auf Anfrage
  • Toughened plastic with surface spray treatment
  • Convenient installation
  • Apply to PanoVu Mini Series Network Indoor PTZ Camera
  Notes:
  • The mount should be installed on the flat surface
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 5 times of the camera
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701970
DS-1604ZJ-P - Wandhalterung für Speed Dome
Preis auf Anfrage
  • Wall mounting bracket with the junction box
  • Aluminum alloy material with surface spray treatment
  • Waterproof design
  • Junction box supports bottom outlet and back outlet
  • The hook for safety rope facilitates speed dome’s installation
  Note:
  • The bracket should be installed on the flat surface.
  • Waterproof rubber is necessary for the outdoor application.
  • The wall must be capable of supporting at least 3 times as much as the total weight of the speed dome and the bracket.
  • The bracket’s maximum load capacity is 10 KG (22 lb.).
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302701980
DS-1473ZJ-155B - Wandbefestigung für Dome Kamera mit Junctionbox
Preis auf Anfrage
  • Aluminiumlegierung mit Oberflächenspray-Behandlung
  • Die Kappe erleichtert die Installation
  • Wasserfestes Design

Hinweis:
  • Die Halterung sollte auf einer ebenen Fläche installiert werden.
  • Der wasserdichte Gummi ist für die Außenanwendung notwendig.
  • Die Wand muss mindestens das 3-fache des Gesamtgewichts der Kamera und der Halterung tragen können.
  • Die maximale Tragfähigkeit der Montierung beträgt 3 kg (6,61 lb.).
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702004
DS-1694ZJ-X - Halterung für Hängemontage, SUS304 rostfreier Stahl
Preis auf Anfrage
  • Natural Stainless Steel ColorStainless steel with surface spray treatment
  • Cable hole design facilitates the installation
  • Applies to both indoor conditions and outdoor conditions
  Notes:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 15 kg (33 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702005
DS-1695ZJ-X - Wandhalterung für Hängemontage, SUS304 rostfreier Stahl
Preis auf Anfrage
  • Stainless steel with surface spray treatment
  • Cable hole design facilitates the installation
  • Applies to both indoor conditions and outdoor conditions
  Notes:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 15 kg (33 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702008
DS-1696ZJ-X - Halterung für Hängemontage, SUS316L rostfreier Stahl
Preis auf Anfrage
  • Natural Stainless Steel ColorStainless steel with surface spray treatment
  • Cable hole design facilitates the installation
  • Applies to both indoor conditions and outdoor conditions
  Notes:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 15 kg (33 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702009
DS-1697ZJ-X - Wandhalterung für Hängemontage, SUS316L rostfreier Stahl
Preis auf Anfrage
  • Stainless steel with surface spray treatment
  • Cable hole design facilitates the installation
  • Applies to both indoor conditions and outdoor conditions
  Notes:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 15 kg (33 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702015
DS-1260ZJ(Black) - Bracket Black Aluminum alloy F105 mm
Preis auf Anfrage
  • Aluminum alloy material with surface spray treatment
  • Appearance: Black
  • Material: Aluminum Alloy
  • Dimension: Ø 105 mm
  • Weight: 251g
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702026
DS-1473ZJ-155(Black) - Wandmontage für Dome Kamera, Ø 155x183.5x240mm, Schwarz
Preis auf Anfrage
  • Aluminiumlegierung mit Oberflächenspray-Behandlung
  • Die Kappe erleichtert die Installation
  • Wasserfestes Design
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702036
DS-1281ZJ-DM45 - Geneigte Deckenhalterung für Dome-Kamera
Preis auf Anfrage
  •  Ø 139.67 x 48.26 mm

  • Aluminum alloy with surface spray treatment
  • Side inlet, and bottom inlet
  • Applies to both indoor conditions, and outdoor conditions
  Notes:
  • The mount should be installed on the flat surface.
  • The waterproof rubber is necessary for the outdoor application.
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount.
  • The maximum load capacity of the mount is 3 kg (6.6 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702037
DS-1280ZJ-DM45 - Junction Box für Dome Kameras, Ø 140 x 40 mm
Preis auf Anfrage
  • Aluminum alloy with surface spray treatment
  • Side inlet, and bottom inlet
  • Interchangeable bottom waterproof cover, and side gland nut
  • Applies to both indoor conditions, and outdoor conditions
  Notes:
  • The junction box should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the junction box
  • The maximum load capacity of the junction box is 3 kg (6.6 lb.)
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702038
DS-1273ZJ-140-DM45 - Wandhalterung für Dome Kamera
Preis auf Anfrage
  • Aluminum alloy with surface spray treatment
  • The cap design facilitates the installation
  • Applies to both indoor conditions, and outdoor conditions
  Notice:
  • The mount should be installed on the flat wall
  • Waterproof rubber is necessary for the outdoor application.
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount.
  • The mount’s maximum load capacity is 3 kg (6.6 lb.).
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Hikvision - 302702039
DS-1271ZJ-140-DM45 - Halterung für hängende Deckenmontage
Preis auf Anfrage
  • Color: Hik White
  • Indoor/Outdoor: Yes
  • Material: Aluminum Alloy
  Notice:
  • The mount should be installed on the flat surface
  • The waterproof rubber is necessary for the outdoor application
  • The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount
  • The mount’s maximum load capacity is 3 kg (6.61 lb
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten