SHOP

Hersteller PLANET

(13 Treffer)
Power over Ethernet
Hersteller
PLANETPLANET
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
Produktfamilie
Layer 2/4Layer 2/4Layer 2+/4Layer 2+/4PoE Hub/Injector/Splitter, IEEE802.3afPoE Hub/Injector/Splitter, IEEE802.3afPoE Hub/Injector/Splitter, IEEE802.3atPoE Hub/Injector/Splitter, IEEE802.3atPoE Hub/Injector/Splitter, Ultra PoE, 60WPoE Hub/Injector/Splitter, Ultra PoE, 60WPoE Injector, IEEE802.3af/at/bt, Managed/UnmanagedPoE Injector, IEEE802.3af/at/bt, Managed/UnmanagedPoE over Koax-KabelPoE over Koax-KabelSoHo / DesktopSoHo / DesktopSwitch managed, 60W Ultra PoE, IEEE802.3btSwitch managed, 60W Ultra PoE, IEEE802.3btSwitch managed, High Power PoE, IEEE802.3atSwitch managed, High Power PoE, IEEE802.3atSwitch managed, PoE, IEEE802.3afSwitch managed, PoE, IEEE802.3afSwitch unmanaged, High Power PoE, IEEE802.3atSwitch unmanaged, High Power PoE, IEEE802.3atSwitch unmanaged, PoE, IEEE802.3afSwitch unmanaged, PoE, IEEE802.3afUnmanaged FE SwitchesUnmanaged FE Switches
PoE
IEEE 802.3 afIEEE 802.3 afIEEE 802.3 af/atIEEE 802.3 af/atIEEE 802.3 af/at/btIEEE 802.3 af/at/btIEEE 802.3 af/btIEEE 802.3 af/btIEEE 802.3 atIEEE 802.3 atIEEE 802.3 at/btIEEE 802.3 at/btIEEE 802.3 btIEEE 802.3 bt
1GBit Ports
111010161622202024242828444848668899
100MBit Ports
16162224245588
SFP+ Ports
4 (Combo)4 (Combo)
SFP Ports
11222 (Combo)2 (Combo)4 (Combo)4 (Combo)
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, PLANET - FGSW-2511P
24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP Combo Ethernet Switch
Preis auf Anfrage
  • 24x 10/100BASE-TX RJ45 copper ports
  • 1x 10/100/1000BASE-T Gigabit RJ45 copper port
  • 1x shared 1000BASE-X SFP interface
  • Hardware-based DIP switch for “Standard”, “VLAN”, “QoS” or “Extend” mode selection
Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
  • Up to 24 IEEE 802.3af/at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • 190-watt PoE budget
  • Each PoE port supports 52V DC power to PoE powered device
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in standard mode
  • The “Extend” mode features 25-watt PoE transmit distance of 250m at speed of 10Mbps 
Switching:
  • Hardware-based 10/100Mbps and 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 16K absolute MAC addresses
  • Automatic address learning and address aging
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing 
Hardware:
  • 19-inch rack-mount size, 1U height
  • LED indicators for PoE ready/activity and LINK/ACT
  • Internal AC power supply
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

Centralized Power Distribution for HD IP Surveillance System:
The FGSW-2511P, a new PLANET 802.3at PoE Fast Ethernet Switch, provides 24 10/100BASE-TX 802.3at PoE+ ports with a total of 190 watts of PoE budget, one 10/100/1000BASE-T uplink port, and one shared 1000BASE-X SFP slot. Its PoE power is more than enough for those network applications with Fast Ethernet speed transmission.  The 24 802.3at PoE+ ports feature PoE power injector function which is able to drive 24 IEEE 802.3at compliant powered devices. The FGSW-2511P also offers a simple, cost-effective and non-blocking wire-speed performance. It comes with a 19-inch metal housing, suitable for desktop deployment in SOHO office or department network application. Distance Extended for Transmission of Power and Data:
The built-in solid DIP switch provides "Standard", "VLAN", “QoS” and "Extend" operation modes. 
  • In the "Standard" operation mode, the FGSW-2511P operates as a normal IEEE 802.3at PoE+ Switch.
  • The "VLAN" operation mode features port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.
  • The "QoS" operation mode features port-based QoS function. Port 1 to Port 8 supports port priority; optimize port cache.
  • In the "Extend" operation mode, PoE Port-1 to Port-8 of the FGSW-2511P can support 25-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the FGSW-2511P provides an additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “VLAN” operation mode. Gigabit Uplink Port:
The FGSW-2511P comes with one combo uplink interface with a transfer rate of 1000Mbps to ensure high-speed data and video transmission, and reliable assurance for connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential. Fiber-Optic Link Capability Enables Extension of Network Deployment:
The mini-GBIC slot built in the FGSW-2511P supports 1000BASE-SX/LX SFP (small form-factor pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver based on the transmission distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and monitoring center in long distance. Robust Protection:
The FGSW-2511P protects against the ESD 4kV surge to improve product stability and also protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. Easy Installation and Cable Connection:
As data transfer and high PoE are transmitted over a cable, the FGSW-2511P is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-2511P support 10/100Mbps or 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-16P2S
16-Port Managed Gbit 802.3at POE+ + 2Port 100/1000 SFP
Preis auf Anfrage
  • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • 1 RJ45 console interface for switch basic management and setup
  Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
  • Intelligent PoE features
    • PoE usage threshold control
    • PD alive check
    • PoE schedule
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN Ids
    • Protocol VLAN
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  Quality of Service:
  • Ingress/Egress Rate Limit per port bandwidth control
  • Storm Control support
    • Broadcast, Unknown Unicast, and Unknown Multicast
  • Traffic classification
    • IEEE 802.1p CoS
    • DSCP/IP Precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security:
  • Authentication
    • IEEE 802.1X port-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • DHCP Option 82
    • RADIUS/TACACS+ login user access authentication
  • Access Control List
    • IPv4 IP-based ACL
    • IPv4 IP-based ACE
    • MAC-based ACL
    • MAC-based ACE
  • MAC Security
    • Static MAC
    • MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  Management:
  • Switch Management Interface
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1, v2c and v3
    • HTTPs secure access
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Configuration upload/download through HTTP/TFTP
    • Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
   
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-2022P
16-Port 1Gbit 802.3at PoE + 2-Port 1Gbit + 2-Port SFP Desktop Switch, 120W
Preis auf Anfrage
  • 16-port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ injector function
  • 2 10/100/1000BASE-T Gigabit RJ45 copper interfaces
  • 2 1000BASE-X SFP interfaces 
     
    Power over Ethernet:
    Complies with IEEE 802.3at Power over Ethernet end-span PSE
    Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1~16)
    Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W.
    Each port supports 54V DC power to PoE powered device
    Auto detects powered device (PD)
    Supports PD alive function
    Circuit protection prevents power interference between ports
    Remote power feeding up to 100m in standard mode with 250m in extend mode
     
    Switching:
    Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
    Supports IEEE 802.3x flow control in full-duplex mode and backpressure in half-duplex mode
    Integrates address look-up engine, supporting 8K absolute MAC addresses
    9K jumbo frame supports all speeds (10/100/1000Mbps)
    Hardware DIP switch for Standard, VLAN and Extend mode selection; 
    VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP ports 19 to 20
    Extend mode: Ports1 to 8 have data rate of 10Mbps. The farthest transmission distance of up to 250 meters and all ports can communicate with each other.
    VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
    Automatic address learning and address aging
    Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
     
    Hardware:
    12-inch desktop size, 1U height
    LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
    1 silent fan to provide stable and efficient power performance
    Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection 
    Supports ±6KV surge immunity 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IPOE-260 Serie
Industrial 2-port 10/100/1000T 802.3at PoE+ Injector Hub
Preis auf Anfrage
  • 4x 10/100/1000BASE-T RJ45 interfaces
    • 2-port Data + Power output
    • 2-port Data input
  • 1 terminal block for master and slave power input with reverse polarity protection
  • Power Range: 48 ~ 56V DC redundant power (IPOE-260)
  • Power Range: 12 ~ 56V DC redundant power (IPOE-260-12V)
  • LED indicators for power LED and PoE-in-use  
PoE:
  • Gigabit Power over Ethernet Plus mid-span PSE
  • IEEE 802.3at PoE+ compliant 
  • IEEE 802.3at splitter devices compatible
  • Supports PoE Power up to 36 watts for PoE port
  • Provides DC 54V power over RJ45 Ethernet cable to device 
  • Auto-detection of PoE IEEE 802.3af/at devices 
  • Remote power feeding up to 100m 
Industrial Case and Installation:
  • IP30 slim metal case
  • DIN-rail, wall-mount or side wall-mount design
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

Advanced 802.3at PoE+ Network Solution:
PLANET IPOE-260 2-Port, Mid-span Industrial IEEE 802.3at Power over Ethernet Plus Injector Hub series provides a maximum of up to 36 watts of power output over Ethernet cables. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall or ceiling, and most of all, it reduces installation time. 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - IPOE-E174
1Port Ultra Gbit PoE to 4Port 802.3af/at Extender Industrial, IP30
Preis auf Anfrage
  • 5-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input - 4-port data + power output   Power over Ethernet
  • 1-port data + power input
- Complies with ultra Power over Ethernet end-span and mid-span PD - Complies with IEEE 802.3at High Power over Ethernet end-span / mid-span PD - Supports PoE input power up to 60 watts
  • 4-port data + power output
- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet / end-span PSE - Up to 4 IEEE 802.3af / 802.3at devices powered - Supports PoE power up to 30.8 watts for each PoE port - Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device
  Layer 2 Features
  • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • 9K jumbo frame support in 1000Mbps duplex mode
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  Industrial Case / Installation
  • IP30 metal case
  • DIN rail and wall-mount design
  • Supports EFT protection for 6000V DC power, and 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • No external power cable required for installation
  • Plug and Play installation
  • LED indicators for each port in use and PoE power usage (25%, 50% and 75% )
  Standards Compliance
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3x Flow Control
  • IEEE 802.3at High Power over Ethernet
  • IEEE 802.3af Power over Ethernet
  • FCC Part 15 Class A, CE
  PoE Solution for Long-reach Distance PLANET IPOE-E174 is an industrial 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 60-watt PoE power from ultra PoE input port and supplies a maximum of 50-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at / 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT. 5/5e/6 UTP cable to 200m up to 4 powered devices at the same time. The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.    Environmentally Hardened Design With industrial-level IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.    Intelligent LED Indicator for Real-time PoE Usage The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 25, 50 and 75 percent of PoE power usage. With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.    Plug and Play, Easy Cabling Installation The IPOE-E174 is quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD). The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact mini box containing 5 RJ45 ports, of which the 1 "PoE IN" port functions as PoE (Data and Power) input and the 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector to transmit DC voltage over the Cat. 5/5e/6 cable and transfer data and power simultaneously between the PSE and PD.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-161
IEEE 802.3at Gbit High Power PoE Injector - 30W
Preis auf Anfrage
  • 2-Port RJ-45 interfaces
  –1-Port Data + Power output   –1-Port Data input
  •  1 DC 56V input power socket
  PoE
  •   Complies with IEEE 802.3at Gigabit High Power over Ethernet standard, Mid-Span PSE
  •   Provides DC 56V power over RJ-45 Ethernet cable to devices with Ethernet port
  •   Provides PoE power to 1 IEEE 802.3at compliant device
  •   Supports PoE Power up to 30 watts for PoE port
  •   Auto-detects PoE IEEE 802.3at equipment, protecting the devices from being damaged by
  incorrect installation
  •   Remote power feeding up to 100m
  •   IEEE 802.3af Splitter devices compatible
  Hardware
  •  Plastic case
  •  LED indicators for Power LED and PoE In-use
  Standard Compliance
  •   IEEE 802.3 10Base-T
  •   IEEE 802.3u 100Base-TX
  •   IEEE 802.3ab 1000Base-T
  •   IEEE 802.3at Power over Ethernet
  •   FCC Part 15 Class A, CE 
  PLANET Technology has announced a complete IEEE 802.3af Power over Ethernet Injector solution to filling flexible powering demand from various Ethernet environments where power outlets are hard to find. Now, PLANET has releases the next generation Power over Ethernet Injector, POE-161, with brand-new IEEE 802.3at High Power over Ethernet technology applied. The POE-161 provides the following key features:
    • IEEE 802.3at Power over Ethernet stanard compliant
    • Maximum 30W output power support
    • 10/100/1000Mbps duplex mode support
  The POE-161 is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet Injector with maximum up to 30 watts of power output over Ethernet cables. It is designed specifically to fill the demand of the growing higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen / video and voice over IP (VoIP) telephones, multi-channel (11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The POE-161 High Power Injector is an ideal solution to delivering data and power to network devices directly via the RJ-45 Port interface without the need of installing extra power outlets and electrical cabling.   Quick and Easy High Power PoE Network Deployment The POE-161 is a Mid-Span IEEE 802.3at Gigabit High Power over Ethernet Injector which provides DC 56V over Ethernet cables. The POE-161 inserts DC voltage into Cat.5/5e/6 cable, allowing the cable between the Injector (POE-161) and Splitter (POE-162S) to transfer data and power simultaneously for up to 100 meters. The POE-161 delivers the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit High Power over Ethernet Injector, and the connected IEEE 802.3at Gigabit High Power over Ethernet splitter will spilt the digital data and the power into two selectable DC outputs (12VDC / 24VDC).   Cost effective and Easy Cabling Installation With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator can use only one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, by connecting to the high power PoE splitter POE-162S, the POE-161 can offer benefits of cost saving, easy networking planning and high reliability. Upon the installation of IEEE 802.3at compliant devices, the POE-161, when functioning with the POE-162S, can keep the connection while migrating or splitting the power and the Ethernet digital packets. It thus reduces cables, eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place, and most of all, reduces installation time. The high Power over Ethernet solution frees the Security IP Camera and wireless AP deployment from restrictions of power outlet locations.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-161S
IEEE 802.3at Gbit High Power PoE Splitter - 5V/12V
Preis auf Anfrage
  • 2 RJ45 interfaces
    • 1-port PoE Power + Data input
    • 1-port Data output
  • 1 DC out plug connector
  PoE:
  • Complies with IEEE 802.3at Power over Ethernet Plus PD
  • Splits the 52~56V DC power over RJ45 Ethernet cable into 5V/12V DC output
  • Up to 1 non-IEEE 802.3at device powered
  • Auto detects IEEE 802.3at PoE compliant equipment, protects devices from being damaged by incorrect installation
  • Adjustable two different output voltage options (5V, 4.5A; 12V, 2A) to fit various devices
  • Distance up to 100 meters
  • IEEE 802.3af PoE injector devices compatible
  Hardware:
  • Plastic case
  • 5V/12V DIP switch
  • LED power input indicators
  Standard Compliance:
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3at Power over Ethernet Plus standard
  • FCC Part 15 Class A, CE
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-162S
IEEE 802.3at Gbit High Power PoE Splitter - 12V/24V
Preis auf Anfrage
  • 2-Port RJ-45 interfaces
    • 1-Port PoE Power+ Data input
    • 1-Port Data output
  • 1 DC output plug connector
  PoE:
  • Complies with IEEE 802.3at Power over Ethernet PD
  • Splits the 52 ~ 56V DC power over RJ-45 Ethernet cable into DC 12V / 24V output
  • Up to 1 non-IEEE 802.3at device can be powered
  • Auto-detects of PoE IEEE 802.3at equipment and protects devices from being damaged by incorrect installation
  • Adjustable two different output voltage options (12V / 2A, 24V / 1A) to fit various devices
  • Distance up to 100 meters
  Hardware:
  • Plastic case
  • 12V / 24V DIP switch
  • LED indicators power input indication
  Standard Compliance:
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3at Power over Ethernet standard
  • FCC Part 15 Class A, CE
  PLANET has released a next-generation Power over Ethernet Splitter product, POE-162S, compliant with brand-new IEEE 802.3at High Power over Ethernet standard that supports a maximum of 25.5 watts of input power. The POE-162S provides the following key features:
    • IEEE 802.3at Power over Ethernet Standard Compliance
    • 12V / 24V DC Power Output Through DIP Switch
    • Passive 10/100/1000Mbps Duplex Mode Support
    • Quick and Easy High Power PoE Network Deployment
  The POE-162S is the IEEE 802.3at High Power over Ethernet Splitter that can split the 52 ~ 56V DC over the Ethernet cable into selectable 12V or 24V DC power output. It is designed specifically to meet the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome camera, color touch-screen / video and voice over IP (VoIP) telephones, multi-channel (11a / b / g / n) wireless LAN access points and other network devices that need to work normally by higher power feeding than power via current IEEE 802.3af PoE standard. The POE-162S High Power Splitter is an ideal solution to transfering power to the network device with high power demand directly via the RJ-45 port interface without the need to install power outlets and electrical cabling.    Quick and Easy High Power PoE Network Deployment The POE-162S (Splitter) can work with the IEEE 802.3at Gigabit Power over Ethernet devices like the POE-161, High Power PoE Switch and Media Converter (Injector, insert DC voltage into Cat.5/5e/6 cable) to transfer data and power simultaneously into the end device. The POE-161, High Power Switch and Media Converter, can combine the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit Power over Ethernet Injector. The POE-162S separates the digital data and the power into 12V / 24V DC power outputs. The maximum distance between the high power PoE injector and the splitter (POE-162S) is 100 meters. Unlike the current Power over Ethernet Splitter, the POE-162S also supports passive 10/100/1000Mbps Ethernet connection ability.    With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, to connect through the high power PoE injector and the POE-162S, you could also have benefits including cost saving, easier for networking planning and higher reliability. Upon IEEE 802.3at compliant devices are installed, the high power PoE injector working together with the POE-162S can make the connection while migrating or splitting the power and the Ethernet digital packets.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-163
IEEE 802.3at Gigabit High Power over Ethernet Injector
Preis auf Anfrage
  • 2-port RJ45 interfaces
- 1-port Data + Power output - 1-port Data input
  • 1 AC 100-240V input power socket
  Power over Ethernet
  • 1-port Gigabit High Power over Ethernet Mid-span PSE
  • IEEE 802.3at Power over Ethernet Plus compliant
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Supports PoE Power up to 30 watts for PoE port
  • Up to 1 IEEE 802.3at device powered
  • Provides DC 50-54V power over RJ45 Ethernet cable to device with Ethernet port
  • Auto-detection of PoE IEEE 802.3at/af equipment and devices that could be damaged by incorrect installation
  • Remote power feeding up to 100m
  Hardware
  • All-in-one design with internal power supply
  • Compact-size plastic case
  • LED indicators for Power LED and Active LED (PoE ready-in-use)
  PoE with High Power, Security, Stability and Easy Installation Features As the applications of Power over Ethernet have expanded to home users from the IT industry. PLANET has developed a new Single-Port PoE+ Injector which meets the requirements of both the IT industry and home users for high wattage output and easy installation, respectively.   The POE-163 is a wall-mountable, single-port Gigabit 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-163 helps users to utilize just one Ethernet cable to easily install and deploy IP camera, wireless AP or VoIP phone networking in environments where power outlet is hard to find.    It offers an affordable, safe and reliable power solution for cost-conscious business and home users deploying Power over Ethernet networks.   30-watt Power over Ethernet Capability The PoE in-line power following the IEEE 802.3at/af Power over Ethernet Plus standard makes the POE-163 able to deliver Gigabit speed Ethernet data and up to 30 watts of power to remote PoE compliant powered devices (PDs) over one Cat.5E/6 Ethernet cable. The POE-163 provides more flexibility in power requirement for all kinds of PDs at affordable installation costs. Designed especially for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) speed-dome camera, high power outdoor AP can be powered and work normally just through a single UTP cable with PoE power injector, the POE-163.   All-in-One and Compact-size Design With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-163 is an all-in-one, single-port PoE+ injector with internal power supply. In the compact size housing, the POE-163 provides one 100-240V AC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE ) on the top side and two RJ45 ports (POE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and the POE-163 is ready to provide high-speed network communication and high power PoE+ injector functions simultaneously with no need of software configuration.    Quick and Easy Cabling Installation for PoE Network Deployment Complying with both 802.3af and 802.3at PoE+ standards, the POE-163 allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The POE-163 frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-164
IEEE 802.3at High Power PoE+ Fast Ethernet Injector (30watts)
Preis auf Anfrage
  • 2-port RJ45 interfaces
- 1-port Data + Power output - 1-port Data input
  • 1 AC 100-240V input power socket
  Power over Ethernet
  • 1-port High Power over Ethernet Mid-span PSE
  • IEEE 802.3at Power over Ethernet Plus compliant
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Supports PoE Power up to 30 watts for PoE port
  • Up to 1 IEEE 802.3at device powered
  • Provides DC 53V power over RJ45 Ethernet cable to device with Ethernet port
  • Auto-detection of PoE IEEE 802.3at/af equipment and devices that could be damaged by incorrect installation
  • Remote power feeding up to 100m
  Hardware
  • All-in-one design with internal power supply
  • Compact-size plastic case
  • LED indicators for Power LED and Active LED (PoE ready-in-use)
    PoE with High Power, Security, Stability and Easy Installation Features As the applications of Power over Ethernet have expanded to home users from the IT industry, PLANET has developed a new Single-Port PoE+ Injector which meets the requirements of both the IT industry and home users for high wattage output and easy installation, respectively.   The POE-164 is a wall-mountable, single-port 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-164 helps users to utilize just one Ethernet cable to easily install and deploy IP camera, wireless AP or VoIP phone networking in environments where power outlet is hard to find.networking in environments where power outlet is hard to find.    It offers an affordable, safe and reliable power solution for cost-conscious business and home users deploying Power over Ethernet networks.   30-watt Power over Ethernet Capability The PoE in-line power following the IEEE 802.3at/af Power over Ethernet Plus standard makes the POE-164 able to deliver Ethernet data and up to 30 watts of power to remote PoE compliant powered devices (PDs) over one Cat.5E/6 Ethernet cable. The POE-164 provides more flexibility in power requirement for all kinds of PDs at affordable installation costs. Designed especially for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) speed-dome camera, high power outdoor AP can be powered and work normally just through a single UTP cable with PoE power injector, the POE-164.   All-in-One and Compact-size Design With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-164 is an all-in-one, single-port PoE+ injector with internal power supply. In the compact-size housing, the POE-164 provides one 100-240V AC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE ) on the top side and two RJ45 ports (POE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and the POE-164 is ready to provide high-speed network communication and high power PoE+ injector functions simultaneously with no need of software configuration.    Quick and Easy Cabling Installation for PoE Network Deployment Complying with both 802.3af and 802.3at PoE+ standards, the POE-164 allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The POE-164 frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-171
Single Port 1Gbit Ultra POE Injector (60 Watts), external Power Adapter
Preis auf Anfrage
  • 2-Port RJ-45 interface
- 1-Port Data + Power output - 1-Port Data input
  • 1 DC 52~56V input power socket
Power over Ethernet
  • Ultra Power over Ethernet End-Span/Mid-Span PSE
  • IEEE 802.3at/af PoE standard compliant
  • Compatible with All IEEE 802.3at/af powered devices
  • Supports 56VDC, 60-watt PoE power output at maximum
  • Auto-detection of PoE IEEE 802.3at/af equipment and device for possible damage by incorrect installation
  • Automatic detection and protection of non–standard Ethernet terminals
  • Remote power feeding up to 100 meters
Hardware
  • Compact size metal case
  • LED indicators for power LED and PoE In-use LED
Standard Compliance
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3at High Power over Ethernet
  • IEEE 802.3af Power over Ethernet
  • FCC Part 15 Class A, CE
  Quick and Easy Gigabit High Power PoE Network Deployment The POE-171 is a single port ultra Power over Ethernet Injector with maximum up to 60 watts of power output over Ethernet cable. It is designed specifically to fill the demand of growing higher power required network equipment. If the POE-171 co-works with PLANET POE-171S (60-watt IEEE 802.3at PoE splitter), it can offer more PoE applications, such as:  
    • PoE PTZ Speed Dome
    • Other Network devices that need higher PoE power to work normally
    • Thin-client
    • AIO(All-in-One) touch PC
    • Remote digital signage display
   The POE-171 delivers the Ethernet digital data with DC 56V power over the twisted pair cables as an IEEE 802.3at Gigabit High Power over Ethernet Injector, and it supports distance from POE-171 to a PoE device up to 100 meters.   60 watts of Power over 4-Pair UTP The POE-171 ultra PoE solution uses cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.    Cost-effective and Easy Cabling Installation With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-171 is in the compact size housing, and it provides one 52~56V DC input power jacket at its right side, one power LED and two PoE In-use LEDs (802.3at End-span and 802.3at Mid-span) at top side. Two RJ-45 ports -- Ethernet port and Ethernet+DC port -- are at side panel. Simply plug in the Ethernet cables and DC power cord, and the POE-171 is ready to provide high speed network communication and 60-watt ultra power PoE injector functions simultaneously with no need of software configuration.    The POE-171 Ultra PoE Injector is an ideal solution that enables network device with high power demand to be powered directly via the RJ-45 Port interface without the need to install power outlets and electrical cabling.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-171S
Single Port 1Gbit Ultra POE Spliter (12V/19V/24V)
Preis auf Anfrage
Interface
  • 2-Port RJ-45 interfaces
- 1-Port Data + Power input - 1-Port Data output
  • 1-Port DC output power socket
  • 1 DC 12V/19V/24V DIP switch
Power over Ethernet
  • Ultra Power over Ethernet End-Span / Mid-Span PSE
  • IEEE 802.3at/af PoE standard compliant
  • Compatible with All IEEE 802.3at/af Powered Devices
  • Supports 56VDC, 50pwatt PoE power output
  • Splits the 56V DC power over RJ-45 Ethernet cable into DC 12V/19V/24V output
  • Remote power feeding up to 100 meters
Hardware
  • Metal case
  • All-in-one compact size design
  • LED indicators for Power LED and POE input
  • Three-mode DC output DIP switch for 12V/19V/24V
Standard Compliance
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3at High Power over Ethernet
  • IEEE 802.3af Power over Ethernet
  • FCC Part 15 Class A, CE
  Quick and Easy Gigabit High Power PoE Network Deployment PLANET POE-171S Gigabit ultra Power over Ethernet splitter delivers the Ethernet digital data with DC 56V power over the twisted pair cables as an IEEE 802.3at/af Gigabit high Power over Ethernet splitter, and it separates the digital data and the power into three optional outputs (12V / 19V /24V DC) and distance up to 100 meters. If the POE-171S co-works with PLANET POE-171 (60-watt IEEE 802.3at PoE injector), it can offer more PoE applications, such as:    ■ PoE PTZ Speed Dome  ■ Other Network devices that need higher PoE power to work normally  ■ Thin-client  ■ AIO(All-in-One) touch PC  ■ Remote digital signage display    The POE-171S frees the device deployment from restrictions due to power outlet locations, which eliminates the costs for additional AC wiring and reduces the installation time.   50 watts of Power over 4-Pair UTP The POE-171S and POE-171 ultra PoE solution use cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 50 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.    Cost-effective and Easy Cabling Installation In the IEEE 802.3at Gigabit high Power over Ethernet devices installed, the system administrator only has to connect one single RJ-45 Ethernet cable to carry both power and data from an IEEE 802.3at/af PoE injector to POE-171S, and then the POE-171S splits data and DC power to any of IP networking devices. Besides, to connect through IEEE 802.3at Power over Ethernet injector and POE-171S, you can also have the benefits of cost saving, easy networking planning and higher reliability. Upon the completion of the installation of IEEE 802.3at compliant devices, the POE-171S, when functioning with the POE-171, can make the connection while migrating or splitting the power and the Ethernet digital packets, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other Network devices that need 50-watt high power to work normally.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - POE-E202
1Port IEEE 802.3at PoE+ to 2-Port 802.3af/at Gbit PoE Extender
Preis auf Anfrage
  • 3-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input - 2-port data + power output   Power over Ethernet
  • 1-port data + power input
- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD - Supports PoE input power up to 30.8 watts
  • 2-port data + power output
- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE - Up to 2 IEEE 802.3af/802.3at devices powered - Supports PoE power up to 25 watts for each PoE port - Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device
  Layer 2 Features
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  Case and Installation
  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
  PoE Solution for Breaking RJ45 100m Limitation PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.   Plug and Play Installation The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.  
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /