SHOP

Hersteller PLANET

Power over Ethernet
Hersteller
PLANETPLANET
Produktfamilie
PoE Hub/Injector/Splitter, IEEE802.3afPoE Hub/Injector/Splitter, IEEE802.3afPoE Hub/Injector/Splitter, IEEE802.3atPoE Hub/Injector/Splitter, IEEE802.3atPoE Hub/Injector/Splitter, Ultra PoE, 60WPoE Hub/Injector/Splitter, Ultra PoE, 60WPoE Injector, IEEE802.3af/at/bt, Managed/UnmanagedPoE Injector, IEEE802.3af/at/bt, Managed/UnmanagedPoE over Koax-KabelPoE over Koax-KabelSwitch managed, 60W Ultra PoE, IEEE802.3btSwitch managed, 60W Ultra PoE, IEEE802.3btSwitch managed, High Power PoE, IEEE802.3atSwitch managed, High Power PoE, IEEE802.3atSwitch managed, PoE, IEEE802.3afSwitch managed, PoE, IEEE802.3afSwitch unmanaged, High Power PoE, IEEE802.3atSwitch unmanaged, High Power PoE, IEEE802.3atSwitch unmanaged, PoE, IEEE802.3afSwitch unmanaged, PoE, IEEE802.3af
PoE
IEEE 802.3afIEEE 802.3afIEEE 802.3af/atIEEE 802.3af/atIEEE 802.3af/at, Ultra PoEIEEE 802.3af/at, Ultra PoEIEEE 802.3atIEEE 802.3atUltra PoEUltra PoE
1GBit Ports
1110101616222020242428284848668899
100MBit Ports
161624245588
SFP+ Ports
4 (Combo)4 (Combo)
SFP Ports
222 (Combo)2 (Combo)
weitere Filter anzeigen weniger Filter anzeigen
Hersteller
Hersteller, PLANET - FGSD-1008HPS
8-Port 10/100T 802.3at HP POE + 2Port Gbit combo Web Smart
Preis auf Anfrage
  • 8-port 10/100BASE-TX RJ45 copper with PoE in-line supported
  • 2-port 10/100/1000BASE-T RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots to share with Port-9 to Port-10
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 8 IEEE 802.3at / 802.3af devices powered
  • 125 watts PoE budget
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN
- IEEE 802.1Q tag-based VLAN, up to 30 VLANs groups, out of 4094 VLAN IDs - Port-based VLAN, up to 10 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 3 trunk / LACP groups, up to 4 ports per trunk / LACP group
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port, many-to-1
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • Ingress / Egress Rate Limit per port bandwidth control
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 / v2c switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Configuration upload/download through HTTP
  • Hardware reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility
   Ideal Cost-effective Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSD-1008HPS 802.3at PoE Web Smart Switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSD-1008HPS provides cost-effective, non-blocking wire-speed performance and intelligent PoE functions along with 8 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces, supporting high-speed transmission of surveillance images and videos.    Perfectly-integrated Solution for PoE IP Camera and NVR System Being different from the general IT industry PoE switch which usually contains 12 or 24 PoE ports, the FGSD-1008HPS provides eight 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 5.6Gbps high-performance switch architecture and 125-watt PoE power budget, the recorded video files from the 8 PoE IP cameras can be powered by the FGSD-1008HPS and saved in the 8-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSD-1008HPS can be combined with one 8-channel NVR and 8 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSD-1008HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSD-1008HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.    Robust Layer 2 Features The FGSD-1008HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSD-1008HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 30. Via aggregation of supporting ports, the FGSD-1008HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.    Flexible and Extendable Uplink Solution The FGSD-1008HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSD-1022VHP
8-Port 10/100TX 802.3at PoE + 2-Port Gbit TP/SFP combo(120W)
Preis auf Anfrage
  • 8-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 53V DC power to PoE Powered Device
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 12-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 1 silent fan to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSD-1022VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSD-1022VHP is equipped with 8 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 120 watts and non-blocking data switching performance, the FGSD-1022VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSD-1022VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSD-1022VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. The FGSD-1022VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode.   The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.   In the “Extend” operation mode, the FGSD-1022VHP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSD-1022VHP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Furthermore, its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.    Flexible and Extendable Two Gigabit Uplink Solution The FGSD-1022VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for IP surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSD-1022VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSD-1022VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSD-1022VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSD-910HP
13" 8-Port 10/100 Ethernet 802.3at POE+ Switch +1Port Gbit
Preis auf Anfrage
  • 8-Port 10/100Mbps Fast Ethernet Switch
  • 8-Port supports 56V DC power to PoE powered device
  • 1-Port 10/100/1000Mbps Gigabit Ethernet Switch
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
  • Up to 8 IEEE 802.3af devices powered
- Supports PoE Power up to 15.4 watts for each PoE port
  • Up to 3 IEEE 802.3at devices powered
- Supports PoE Power up to 30 watts for each PoE port
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X (Port 1 to Port 8)
  • Hardware based 10/100/1000Mbps auto-negotiation and Auto MDI/MDI-X (Port 9)
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • Automatic address learning and address aging
  Hardware
  • 12-inch desktop size, 1U height
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • 1 silent fan to provide stable and efficient power performance
   Centralized Power Distribution for Ethernet Networking The FGSD-910HP, a new member in the PLANET 802.3at PoE Fast Ethernet Switch family, provides 8-port 10/100Mbps 802.3at / 802.3af Power over Ethernet + 1-Gigabit Port with a total of 120 watts of PoE budget, which is an ideal solution to fulfilling the demand of sufficient PoE power for network applications with Fast Ethernet speed transmission. The eight 802.3af / 802.3at PoE ports feature PoE power injector function which is able to drive 8 IEEE 802.3af compliant powered devices or 3 IEEE 802.3at compliant powered devices. The FGSD-910HP also offers a simple, cost-effective and non-blocking wire-speed performance. It comes with a 12-inch metal compact housing, suitable for desktop deployment in SOHO office or department network application.   Ideal Solution for Securing IP Surveillance Infrastructure Particularly designed for the growing popular IP Surveillance applications, the FGSD-910HP 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FGSD-910HP provides both 802.3af / 802.3at PoE functions along with 8 10/100Base-TX ports featuring 15.4-watt 802.3af / 30-watt 802.3at PoE in RJ-45 copper interfaces and 1 extra Gigabit TP interface supporting high speed transmission of surveillance images and videos.    Perfectly Integrated Solution for IP PoE Camera and NVR System Different from the general IT industrial PoE Switch which usually comes with 12 or 24 PoE ports, the FGSD-910HP provides eight 802.3af / 802.3at PoE ports for catering to small scale of IP Surveillance networks at a lower total cost. The FGSD-910HP comes with high performance switch architecture and 120-watt PoE power budget. The recorded video files from eight PoE IP Cameras can be powered by the FGSD-910HP and saved in the 8-channel NVR system or surveillance software to perform comprehensive security monitoring. For instance, one FGSD-910HP can be combined with one 8-Channel NVR and eight PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.   Stable and High Performance Switch Architecture The FGSD-910HP has a 4K MAC address table, featuring high performance switch architecture capable of providing the non-blocking 3.6Gbps switch fabric and wire-speed throughput as high as 2.67Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x Full-Duplex flow control function of the FGSD-910HP enables PD devices and servers to be directly connected to the switch for wire-speed packet transfer performance without the risk of packet loss. The FGSD-910HP RJ-45 copper interfaces support 10/100Mbps Auto-Negotiation at port 1 to port 8 and 10/100/1000Mbps Auto-Negotiation at port 9 for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.   Easy Cable Connection With data and power over Ethernet from one unit, the FGSD-910HP reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. Providing 8 PoE interfaces, the FGSD-910HP is ideal for small businesses and workgroups requiring deploying the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-1816HPS
16-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Physical Port
  • 16-port 10/100Base-TX RJ-45 copper with PoE in-line supported
  • 2-port 10/100/1000Base-T RJ-45 copper
  • 2 1000Base-X mini-GBIC/SFP slots to share with Port-17 to Port-18
  • Reset button for system management
  PoE
  • Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 16 IEEE 802.3at / 802.3af devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - PoE Power sequential - PoE schedule   Layer 2 Features
  • Auto-MDI/MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN:
- IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs - Port-based VLAN, up to 16 VLAN groups - MTU VLAN (Multi-tenant Unit VLAN)
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (Static Trunk)
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1d Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (Many-to-1)
  • Loopback protection to avoid broadcast loops
  Quality of Service
  • 2 priority queues on all switch ports
  • Traffic classification
- Port-based priority - IEEE 802.1p-based priority - IP TOS / DSCP-based priority - TCP / UDP port-based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v1 and v2
  Security
  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Management
  • Switch Management Interfaces
- Web switch management - SNMP v1 switch management
  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Hardware reset button for system reboot or reset to factory default
  Ideal Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET FGSW-1816HPS 802.3at PoE web smart switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSW-1816HPS provides intelligent PoE functions along with 16 10/100Base-TX ports featuring 30-watt 802.3at PoE+ with RJ-45 copper interfaces and 2 Gigabit TP/SFP combo interfaces supporting high-speed transmission of surveillance images and videos.    Perfectly- integrated Solution for PoE IP Camera and NVR System Being different from the general IT industrial PoE switch which usually contains 12 or 24 PoE ports, the FGSW-1816HPS provides 16 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 7.2Gbps high-performance switch architecture and 220-watt PoE power budget, the recorded video files from 16 PoE IP cameras can be powered by the FGSW-1816HPS and saved in the 8 / 16 / 32-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSW-1816HPS can be combined with one 16-channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Intelligent LED Indicator for Real-time PoE Usage The FGSW-1816HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSW-1816HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 50W, 100W, 150W and 190W of PoE power usage.    PoE Schedule for Energy Saving Besides being used as an IP Surveillance, the FGSW-1816HPS is certainly applicable to constructing any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the FGSW-1816HPS can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function is for you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.    Robust Layer 2 Features The FGSW-1816HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSW-1816HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 32. Via aggregation of supporting ports, the FGSW-1816HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.   Flexible and Extendable Uplink Solution The FGSW-1816HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ-45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-1822VHP
16-Port 10/100TX 802.3at PoE + 2Port Gbit TP/SFP Combo(300W)
Preis auf Anfrage
  • 16-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 54V DC power to PoE Powered Device
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 19-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 2 silent fans to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
    Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-1822VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-1822VHP is equipped with 16 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-1822VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-1822VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-1822VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-1822VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-1822VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-1822VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-1822VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-1822VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-2622VHP
24Port 10/100TX 802.3at PoE + 2Port Gbit TP/SFP Combo (300W)
Preis auf Anfrage
  • 24-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 54V DC power to PoE Powered Device
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode
  Switching
  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging
  Hardware
  • 19-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 2 silent fans to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity
   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-2622VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-2622VHP is equipped with 24 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-2622VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-2622VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-2622VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-2622VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-2622VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-2622VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-2622VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-2622VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FGSW-2624HPS(4)
24-Port 10/100TX 802.3at HP POE + 2Port Gbit Combo Web Smart
Preis auf Anfrage
Verfügbarkeit:
Variationen: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-1600P
16-Port 10/100Mbps unmanaged PoE Fast Ethernet Switch
Preis auf Anfrage
• 16 10/100Mbps Fast Ethernet ports • All ports support 48V DC power to PoE Powered Device   Power over Ethernet • Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE • Up to 16 IEEE 802.3af devices powered • PoE Power Budget 125 watts • Supports PoE Power up to 15.4 watts for each PoE port • Auto detect powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Switching • Hardware based 10/100Mbps auto-negotiation and auto MDI / MDI-X • Flow control for full duplex operation and back pressure for half duplex operation • Integrates address look-up engine, supporting 8K absolute MAC addresses • Automatic address learning and address aging   Hardware • 19-inch size, 1U height • LED indicators for PoE ready and PoE activity • 2 silent fans to support stable and efficient power performance   Centralized Power Distribution for Ethernet Networking To fulfill the demand of sufficient PoE power for network applications with 10/100Mbps wire speed transmission, PLANET introduces a new member in the 802.3af PoE Fast Ethernet Switch family – FNSW-1600P, the 16-Port 10/100Mbps 802.3af Power over Ethernet Switch with 125-watts PoE budget. The 16 Fast Ethernet ports integrated with 802.3af PoE injector function are able to drive at least 9 x IEEE 802.3af 12.95-watt Class 3 compliant powered devices. The FNSW-1600P also provides a simple, cost-effective, and non-blocking wire-speed performance with 19-inch metal shape for deployment in compact housing, SOHO office or department network application.   Great Ethernet Traffic Transmission Ability The FNSW-1600P features high performance switch architecture capable of providing the non-blocking 3.2Gbps switch fabric and wire-speed throughput as high as 2.38Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x full-duplex flow control function of the FNSW-1600P enables PD devices and servers directly connect to the Switch for wire-speed packet transfer performance without risk of packet loss.   Easy and Cost-effective Network Deployment With data and power over Ethernet from one unit, the FNSW-1600P is able to reduce the need of cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 125-watts Power Budget, the FNSW-1600P is ideal for small business and workgroups deploying the PoE for the wireless access points, IP surveillance cameras and IP phones in any places easily and efficiently.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-1608PS©
16-Port 10/100Mbps with 8-Port PoE Web Smart Ethernet Switch
Preis auf Anfrage
Verfügbarkeit:
Variationen: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - FNSW-2400PS
24-Port 10/100 Web/Smart Ethernet POE Switch (125W)
Preis auf Anfrage
• 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector • Reset button for system management   Power over Ethernet • Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE • Up to 24 IEEE 802.3af devices powered • Supports PoE Power up to 15.4 watts for each 802.3af PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Layer 2 Features • Auto-MDI / MDI-X detection on each RJ-45 port • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports VLAN:  –IEEE 802.1Q Tag-based VLAN  –Port-based VLAN  –MTU VLAN (Multi-Tenant Unit VLAN) • Supports Link Aggregation  –up to 2 trunk groups  –up to 4 Fast Ethernet ports per trunk group  –IEEE 802.3ad LACP (Link Aggregation Control Protocol) • Supports Spanning Tree Protocol  –STP, IEEE 802.1D (Classic Spanning Tree Protocol)  –RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)  –Loopback Detection • Port mirroring to monitor the incoming or outgoing traffic on a particular port   Quality of Service • 2 priority queues on all switch ports • Traffic classification:  –Port-based priority  –IEEE 802.1p based priority  –IP TOS / DSCP based priority  –TCP / UDP Port-based QoS • Strict priority and Weighted Round Robin (WRR) CoS policies • In/Out rate limit control on each port • Broadcast Storm Control support   Multicast • Supports IGMP Snooping v1 and v2   Security • MAC address filter • TCP & UDP filter on each port • Management idle time security   Management • Remote Web interface for Switch management and setup • Supports SNMP v1 • Supports DHCP Option 82 and DHCP Relay • Firmware upgrade through Web interface • Configuration upload / download through Web interface • Reset button for system reboot or reset to factory default   Cost-effective Edge Network Connection Solution To provide enhanced network management with cost saving benefit to customers, PLANET has released a new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrated with PoE injector function. With 125-watt PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.   IEEE 802.3af Power over Ethernet Support The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP surveillance cameras. With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in the long run and offer customers the key benefit – energy saving.   Easy Cabling Installation The Power over Ethernet technology enables the Ethernet wire to carry both data and power. Thus, the FNSW-2400PS reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.   Friendly Web-based Management For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allow the FNSW-2400PS to have a maximum of up to 24 port-based VLAN groups or up to 32 IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk to combine multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-504HP
4-Port 10/100Mbps 802.3af/at POE + 1-Port 10/100MBPS (60W)
Preis auf Anfrage
  • Five 10/100Mbps Fast Ethernet ports
  • 4 ports support 51V DC power to PoE powered device
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE
  • Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • 60-watt PoE budget
  • Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in the standard mode
  Switching
  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • 1536bytes packet size support
  • Integrates address look-up engine, supporting 1K absolute MAC addresses
  • Automatic address learning and address aging
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware
  • Desktop palm size
  • LED indicators for PoE ready/activity and LINK/ACT
  • One 51V DC power jack
  Easy Deployment for SOHO and Home Users PLANET FSD-504HP, a 4-port 10/100Mbps 802.3at/af Power over Ethernet + 1-port Fast Ethernet Switch, can be easily and quickly deployed for SOHO and home-use PoE application environment by any users as it is compact in size and simple to install. The FSD-504HP is definitely an ideal solution for SOHO and home users as it has the following advanced features:
    • 4-port PoE, 60-watt PoE budget
    • One 10/100Mbps uplink port
    • 250m distance w/30W power output at speed of 10Mbps in the Extend Mode
    • Desktop palm-size design
   Centralized Power Distribution for Small Ethernet Networking The FSD-504HP has a total PoE budget of 60 watts, which is an ideal solution to meeting the demand for sufficient PoE power for network applications. The four 802.3at/af PoE ports provide PoE power injector function which is able to drive two IEEE 802.3at compliant powered devices or four IEEE 802.3af compliant powered devices. The FSD-504HP also provides a simple, cost-effective and non-blocking wire-speed performance. It comes with a palm-size metal housing, suitable for the desktop deployment of SOHO or home-use network environment.    Ideal Solution for Securing SOHO IP Surveillance Infrastructure Targeting the growing popular IP surveillance applications, the FSD-504HP 802.3at/af PoE Switch is also positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FSD-504HP supports both 802.3at and 802.3af PoE standards along with four 10/100BASE-TX ports featuring up to 30 watts per RJ45 copper interface, and one extra Fast Ethernet TP interface supporting high-speed transmission of surveillance images and videos.    802.3at/af PoE Power and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The FSD-504HP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. In the “Extend” operation mode, the FSD-504HP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-504HP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.    Easy Cable Connection With data switching and power over Ethernet integrated into one unit, the FSD-504HP reduces cabling requirements and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the FSD-504HP is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-804P
10" 8-Port 10/100Mbps with 4-Port PoE Ethernet Switch
Preis auf Anfrage
  • 8x 10/100Mbps Fast Ethernet ports
  • 4-Port support 48VDC power to PoE Powered Device
  • unmanaged
  PoE over Ethernet
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 4 IEEE 802.3af devices powered
  • Supports PoE Power up to 15.4 watts for each PoE ports
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100Mbps Auto-negotiation and Auto MDI / MDI-X
  • Flow control for Full Duplex operation and back pressure for Half Duplex operation
  • Integrates address look-up engine, support 1K absolute MAC addresses
  • Automatic address learning and address aging
  Hardware
  • 10-inch desktop size, rack mountable; 1U height
  • LED indicators for POE ready and POE activity
  • Optional Rack Ear Accessories Kit for 10-inch cabinet (RKE-10A) and 19-inch
   cabinet (RKE-10B)
  • 1 silent FAN to provide stable and efficient power performance
  Cost-effective Centralized Power Distribution For cost saving and flexible use of PoE power provision, half of the 10/100Mbps TP ports of the FSD-804P provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. For SOHO or department network, the Switch also provides a simple, cost-effective and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging Ethernet and Fast Ethernet workgroups or networks.   Easy Cabling Installation With data and power over Ethernet, the FSD-804P can reduce cables and eliminate the need for electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. The key feature of the FSD-804P is energy saving. With more efficient switching power supply, the efficiency of the FSD-804P would be much better than four linear power adapters in the long run.   Providing 4 PoE interfaces, the FSD-804P is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost- effectively.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-804PS
8-Port 10/100Mbps with 4-Port PoE Web Smart Ethernet Switch
Preis auf Anfrage
Interface • 8-port 10/100Mbps Fast Ethernet ports • 4-port supports 48V DC power to PoE Powered Device   PoE • Complies with IEEE 802.3af Power over Ethernet End-Span PSE • Up to 4 IEEE 802.3af devices powered • Supports PoE Power up to 15.4 watts for each PoE ports • Auto detects powered device (PD) • Circuit protection prevents power interference between port • Remote power feeding up to 100m   PoE Management • Total PoE power budget control • Per port PoE function enable / disable • PoE Port Power feeding priority • Per PoE port power limit • PD classification detection   Management • Web interface for remote management • Firmware upgrade through Web interface • PLANET Smart Discovery utility automatically finds PLANET devices on the network • SNMP Trap for alarm notification of events   Switching • Hardware based 10/100Mbps Auto-negotiation and Auto MDI / MDI-X function • Flow control for full duplex operation and back pressure for half duplex operation • Integrates address look-up engine, supporting 1K absolute MAC addresses • Automatic address learning and address aging • IEEE 802.1Q Tag based VLAN and Port-based VLAN • 2 priority queues on all switch ports • Port based, IP DSCP and 802,1p tag priority QoS • Ingress / Egress Bandwidth Control • Port Security   Hardware • 10-inch desktop size, rack mountable; 1U height • Reset button for reset to default setting and system reboot • LED indicators for POE ready and POE activity • Optional rack ear Accessories kit for 10-inch cabinet (RKE-10A) and  19-inch cabinet (RKE-10B) • 1 silent fan to provide stable and efficient power performance   Cost-effective Centralized Power Distribution with Remote Management For cost saving and the flexibility of using PoE power provision, half of the 10/100Mbps TP ports of the FSD-804PS provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices.   For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.    Easy Cabling installation With data and power over Ethernet, the FSD-804PS is able to reduce cable installation and eliminate the need for electrical outlets on the wall, ceiling or any unreachable place. Energy saving is the key feature of the use of PoE in the deployment. With more efficient switching power supply, the efficiency of the FSD-804PS would be much better than four linear power adapters in the long run.   Providing 4 PoE interfaces, the FSD-804PS is ideal for small businesses and workgroups requiring to utilize PoE for the deployment of wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost-effectively.   Friendly / Simple Web Management Interface The Web smart functions make it easy to survey and control the PoE power provision to the devices by the Web interface. Basic switching functions such as VLAN, Bandwidth Control, Storm Control and QoS are available for network management.  
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-808HP
13" 8-Port 10/100 Ethernet Switch with 8-Port 802.3at
Preis auf Anfrage
  • 8-Port 10/100Mbps Fast Ethernet
  • 8-Port supports 52V DC power to PoE Powered Device
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE
  • Up to 8 IEEE 802.3af / IEEE 802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • Auto detect powered device (PD)
  • Circuit protection prevents power interference between each port
  • PoE Usage Alarm LED
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • Automatic address learning and address aging
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
  Hardware
  • 12-inch desktop size, 1U height
  • LED indicators for PoE ready, PoE activity and PoE Usage Alarm
  • Fanless design
  High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Fast Ethernet speed transmission, PLANET 802.3at PoE Fast Ethernet Switch - FSD-808HP is an ideal solution. Each 10/100Mbps port of the FSD-808HP features IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 140-watts power output and data per port over one Cat.5E / 6 Ethernet cable. With totally 140-watt PoE budget on the whole system, the FSD-808HP is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by providing double PoE power, more than the current conventional 802.3af PoE.    Intelligent PoE Management To facilitate power management, the FSD-808HP implements powerful PoE intelligent features:
    • PoE Power Usage Display
The FSD-808HP helps users to monitor current status of PoE power usage easily and efficiently by its intelligent PoE Management feature of LED indication. There are two orange LEDs named “PoE Power Usage” located on left side of the FSD-808HP front panel. Of which, one LED indicates the total power output of Port 1-4 and the other LED shows the total power output of Port 5-8. When Port 1-4 or 5-8 PoE output is over 80%, the LED will be lit up. When Port 1-4 or 5-8 PoE output is over 95%, the LED will blink to notify customers for better PoE allocation.    Energy-Saving Green Design The FSD-808HP uses new engine that incorporates one advanced Green Networking technology:
    • Idle Mode Link Down power saving
The Idle mode Link Down power saving of the FSD-808HP complies with IEEE 802.3az Energy-Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is idled.   Easy Installation Providing data transfer and High Power PoE function in one unit, the FSD-808HP is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort.    All RJ-45 copper interfaces of the FSD-808HP support 10/100Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-16P2S
16-Port Managed Gbit 802.3at POE+ + 2Port 100/1000 SFP
Preis auf Anfrage
  • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • 1 RJ45 console interface for switch basic management and setup
  Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
  • Intelligent PoE features
    • PoE usage threshold control
    • PD alive check
    • PoE schedule
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN Ids
    • Protocol VLAN
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  Quality of Service:
  • Ingress/Egress Rate Limit per port bandwidth control
  • Storm Control support
    • Broadcast, Unknown Unicast, and Unknown Multicast
  • Traffic classification
    • IEEE 802.1p CoS
    • DSCP/IP Precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security:
  • Authentication
    • IEEE 802.1X port-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • DHCP Option 82
    • RADIUS/TACACS+ login user access authentication
  • Access Control List
    • IPv4 IP-based ACL
    • IPv4 IP-based ACE
    • MAC-based ACL
    • MAC-based ACE
  • MAC Security
    • Static MAC
    • MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  Management:
  • Switch Management Interface
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1, v2c and v3
    • HTTPs secure access
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Configuration upload/download through HTTP/TFTP
    • Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
   
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-16P4C
16-Port Managed Gbit 802.3at POE+ + 4Port Combo Switch/220W
Preis auf Anfrage
  • 20-port 10/100/1000BASE-T Gigabit RJ45 copper with 16-port IEEE 802.3at/af PoE injector
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with port-17 to port-20 compatible with 100BASE-FX SFP
  • RJ45 console interface for switch basic management and setup
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
- Total PoE power budget control - Per port PoE function enable/disable - PoE Port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
- EEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 4 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
- Broadcast/Unknown unicast/Unknown multicast
  • Traffic classification
- IEEE 802.1p CoS - TOS/DSCP/IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports IPv4 IGMP snooping v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to cooperate with the RADIUS servers - RADIUS/TACACS+ login user access authentication
  • Access control list
- IPv4/IPv6 IP-based ACL - MAC-based ACL
  • MAC security
- Static MAC - MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL
  • IPv4 and IPv6 dual stack management
  • Switch management interface
- Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance
- Firmware upload/download via HTTP / TFTP - Configuration upload / download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface link up and link down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET smart discovery utility
  • Smart fan with speed control
   A Perfect PoE+ Managed Switch with Advanced L2/L4 Switching and Security The GS-4210-16P4C is a new generation of PLANET Gigabit PoE+ Managed Switch series featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 16 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 220 watts for different kinds of PoE applications, the GS-4210-16P4C provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Built-in Unique PoE Functions for Powered Devices Management As the PoE managed switch for surveillance, wireless and VoIP networks, the GS-4210-16P4C features special PoE management functions:
    • PD alive check
    • Scheduled power recycling
    • PoE schedule
    • PoE usage monitoring
  Intelligent Powered Device Alive-Check The GS-4210-16P4C can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-16P4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-16P4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-16P4C can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-16P4C enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Smart Fan Design for Silent Operation The GS-4210-16P4C features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-16P4C is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the GS-4210-16P4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-16P4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-16P4C allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-16P4C is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security The powerful unit offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-16P4C also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-16P4C is equipped with console, web, telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-16P4C offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via telnet and the console port. Moreover, the GS-4210-16P4C offers secure remote management by supporting SSH, SSL and SNMPv3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The GS-4210-16P4C provides 4 extra Gigabit TP interfaces supporting 10/100/1000BASE-T RJ45 copper that connects with surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 100BASE-FX/1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to be uplinked to the backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-16P4C supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-16UP4C
16Port 10/100/1000 Ultra PoE +4Port Gbit SFP managed Switch
Preis auf Anfrage
  • 20x 10/100/1000BASE-T Gigabit RJ45 copper ports with 6-Port IEEE 802.3at/af/Ultra PoE injector
  • 4x 100/1000BASE-X mini-GBIC/SFP slots, shared with port-17 to port-20 compatible with 100BASE-FX SFP
  • RJ45 console interface for switch basic management and setup
  • Power over Ethernet•Complies with IEEE 802.3at Power over Ethernet Plus, end-span/mid-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • VLAN
  • Supports Spanning Tree Protocol
  • Quality of Service (QoS)
  • Multicast
  • Management
  A New Generation Ultra PoE Managed Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-16UP4C is a cost-optimized, 1U, Gigabit Ultra PoE Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 16 10/100/1000BASE-T ports featuring 60-watt Ultra PoE and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 400 watts for different kinds of PoE applications, respectively, the GS-4210-16UP4C provides a quick, safe and cost-effective Ultra PoE network solution for small businesses and enterprises.    60 Watts of Power over 4-pair UTP The GS-4210-16UP4C Ultra PoE solution adopts the IEEE 802.3at/af standard. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pin 1, 2, 3 and 6) or mid-span (Pin 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat.5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs. It can offer more PoE applications, such as:  
    • PoE PTZ speed dome
    • Any network device that needs higher PoE power to work normally
    • Thin-client
    • AIO (All-in-One) touch PC
    • Remote digital signage display
   Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the GS-4210-16UP4C features the following special PoE management functions:
    • PD alive check
    • Scheduled power recycling
    • PoE schedule
    • PoE usage monitoring
  Intelligent Powered Device Alive Check The GS-4210-16UP4C can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-16UP4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-16UP4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-16UP4C can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-16UP4C enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-16UP4C features a desktop-sized metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-16UP4C is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-16UP4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-16UP4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-16UP4C allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-16UP4C is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-16UP4C offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-16UP4C also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-16UP4C is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-16UP4C offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-16UP4C offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The four mini-GBIC slots built in the GS-4210-16UP4C support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-16UP4C supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-24P(L)4C
24-Port 10/100/1000T 802.3at PoE + 4Port Gbit SFP
Preis auf Anfrage
Verfügbarkeit:
Variationen: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-24P2S
24-Port Managed 802.3at POE+ Gbit Ethernet + 2-Port SFP
Preis auf Anfrage
  • 24-port 10/100/1000Base-T Gigabit RJ-45 copper
  • 2 100/1000Base-X mini-GBIC/SFP slots
  • RJ-45 console interface for switch basic management and setup
  • Reset button for system factory default and reboot
  • Complies with IEEE 802.3at High Power over Ethernet
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
- Total PoE power budget control - Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limitation - PoE delay - PD classification detection
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs - Protocol VLAN
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Maximum 8 LACP groups, up to 16 ports per LACP group - Cisco ether-channel (Static Trunk) - Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Ingress / Egress Rate Limit per port bandwidth control
  • Storm Control support
- Broadcast / Unknown-Unicast / Unknown-Multicast
  • Traffic classification
- IEEE 802.1p CoS - DSCP / IP Precedence of IPv4 / IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports IGMP Snooping v2 and v3
  • IGMP Querier mode support
  • IGMP Snooping port filtering
  • Up to 256 multicast groups
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - DHCP Option 82 - RADIUS / TACACS+ login user access authentication
  • Access Control List
- IPv4 IP-based ACL - IPv4 IP-based ACE - MAC-based ACL - MAC-based ACE
  • MAC Security
- Static MAC - MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  • Switch Management Interface
- Local Command Line Interface - Web switch management - Telnet Command Line Interface - SNMP v1, v2c and v3 - HTTPs secure access
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
- Firmware upload / download via HTTP / TFTP - Configuration upload / download through HTTP / TFTP - Dual Images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
  Cost-Optimized Managed PoE+ Switch for Small and Medium Businesses PLANET GS-4210-24P2S is an ideal Gigabit PoE Switch which provides cost-effective advantage to local area network and is widely accepted in the SMB office network. It offers intelligent Layer 2 data packet switching and management functions, friendly web user interface and stable operation. The model complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price. The GS-4210-24P2S is equipped with 24 10/100/1000Base-T Gigabit Ethernet ports and 2 100/1000Base-X SFP interfaces with inner power system. Its 24 Gigabit Ethernet ports integrated with 802.3at PoE+ injector function on all ports. It offers a rack-mountable, affordable, safe and reliable power solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data security and network traffic management.    IEEE 802.3at/af Compliant Power Source Switch The PoE in-line power following the IEEE 802.3at/af standard makes the GS-4210-24P2S able to deliver Gigabit speed data and up to 30 watts of power per port to 24 PoE compliant powered devices (PDs) with a combined power output budget of up to 300 watts. The GS-4210-24P2S provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.    Robust Layer 2 Features The GS-4210-24P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Spanning Tree protocol (STP), Rapid Spanning Tree protocol (RSTP) and Multiple Spanning Tree protocol (MSTP), IGMP Querier and IGMP Snooping. Via aggregation of supporting ports, the GS-4210-24P2S allows the operation of a high-speed trunk to combine with multiple ports such as a 32Gbps fat pipe and supports fail-over as well. The Link Layer Discovery Protocol (LLDP) feature is also included and used to discover basic information about neighboring devices on the local broadcast domain.   Efficient Traffic Control The GS-4210-24P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast / unicast storm control, per port bandwidth control, 802.1p / CoS / IP DSCP QoS priority and remarking. It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantages of the limited network resources.   Enhanced and Secure Management For efficient management, the GS-4210-24P2S is equipped with console, Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the GS-4210-24P2S offers secure remote management by supporting HTTPS and SNMPv3 connections which encrypt the packet content at each session.   Powerful Security PLANET GS-4210-24P2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. The Port Security allows limiting the number of users on a given port. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.   Flexible Extension Solution The two mini-GBIC slots built in the GS-4210-24P2S are compatible with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitor center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber) up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-24UP4C
24-Port Managed 60W Ultra PoE Gbit Ethernet + 4x Combo SFP
Preis auf Anfrage
  • 28x 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3at/af/Ultra PoE injector
  • 4x 100/1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP
  • RJ45 console interface for switch basic management and setup
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span/mid-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE devices powered
  • Supports PoE power up to 60 watts for each ultra PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • Layer 2 Features
  • QoS (Strom control support, Traffic classification)
  • Multicast (IPv4,IPv6, IGMP, MLD)
  • Security( Access Control List, Authentication, MAC security)
  • Management
  A New Generation Ultra PoE Managed Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-24UP4C is a cost-optimized, 1U, Gigabit Ultra PoE Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 24 10/100/1000BASE-T ports featuring 60-watt Ultra PoE and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 600 watts for different kinds of PoE applications, respectively, the GS-4210-24UP4C provides a quick, safe and cost-effective Ultra PoE network solution for small businesses and enterprises   60 Watts of Power over 4-pair UTP The GS-4210-24UP4C Ultra PoE solution adopts the IEEE 802.3at/af standard. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pin 1,2,3 and 6) or mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat.5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs. It can offer more PoE applications, such as:  
  •  PoE PTZ speed dome
  •  Any network device that needs higher PoE power to work normally
  •  Thin-client
  •  AIO (All-in-One) touch PC
  •  Remote digital signage display
  Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the GS-4210-24UP4C features the following special PoE management functions:  
  •  PD alive check
  •  Scheduled power recycling
  •  PoE schedule
  •  PoE usage monitoring
  Intelligent Powered Device Alive Check The GS-4210-24UP4C can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-24UP4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.   Scheduled Power Recycling The GS-4210-24UP4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.   PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-24UP4C can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.   PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-24UP4C enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-24UP4C features a desktop-sized metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-24UP4C is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24UP4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-24UP4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24UP4C allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.   Efficient Traffic Control The GS-4210-24UP4C is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-24UP4C offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-24UP4C also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.   Friendly and Secure Management For efficient management, the GS-4210-24UP4C is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-24UP4C offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-24UP4C offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The four mini-GBIC slots built in the GS-4210-24UP4C support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-24UP4C supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.  
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-48P4S
48-Port 802.3at POE+ Gbit + 4Port SFP Managed Switch 440W
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at/af PoE injector
  • 4x 100/1000BASE-X mini-GBIC/SFP slots
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
- Total PoE power budget control - Per port PoE function enable/disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
- Broadcast/Unknown unicast/Unknown multicast
  • Traffic classification
- IEEE 802.1p CoS - TOS/DSCP/IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports IPv4 IGMP snooping v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS/TACACS+ login user access authentication
  • Access control list
- IPv4/IPv6 IP-based ACL - MAC-based ACL
  • MAC security
- Static MAC - MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter untrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL
  • IPv4 and IPv6 dual stack management
  • Switch management interface
- Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance
- Firmware upload/download via HTTP/TFTP - Configuration upload/download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface link up and link down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET smart discovery utility
  • Smart fan with speed control 
  Cost-effective, High-density PoE Solution Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-48P4S is a cost-optimized, high-density PoE+ Managed Gigabit Ethernet Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 48 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 4 additional Gigabit SFP slots. With a total power budget of up to 440 watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Premium VoIP Networks for Medium- to Large-scale Deployments The GS-4210-48P4S has 48 IEEE 802.3at PoE+ ports, 104Gbps switch fabric and advanced QoS functionality for deploying medium- to large-scale VoIP or wireless networks at a low total cost. One GS-4210-48P4S can power up 48 PoE VoIP phones and delivers HD (high-definition) voice to VoIP network with high priority, resulting in higher quality voice and clearer communication. From now on, customers only need fewer units of the GS-4210-48P4S than before to achieve the goal of cost-effectiveness, thereby saving setup time and human resource.   Built-in Unique PoE Functions for Powered Device Management As it is the managed PoE switch for VoIP, wireless and surveillance networks, the GS-4210-48P4S features the following special PoE management functions:
    • PoE schedule
    • PD alive check
    • Scheduled power recycling
    • PoE usage monitoring
  PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-48P4S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    Intelligent Powered Device Alive-Check The GS-4210-48P4S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-48P4S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-48P4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-48P4S features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-48P4S is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-48P4S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.   Robust Layer 2 Features The GS-4210-48P4S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-48P4S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-48P4S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-48P4S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-48P4S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-48P4S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-48P4S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-48P4S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The four mini-GBIC slots built in the GS-4210-48P4S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-48P4S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-8P2S
8-Port Managed 802.3at POE+ Gbit + 2Port SFP Managed Switch
Preis auf Anfrage
Physical Port
  • 8 10/100/1000BASE-T Gigabit RJ45 copper ports with 8-port IEEE 802.3at/af PoE injector
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  Power over Ethernet
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
- Total PoE power budget control - Per port PoE function enable/disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule   Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  Quality of Service
  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
- Broadcast / Unknown unicast / Unknown multicast
  • Traffic classification
- IEEE 802.1p CoS - TOS / DSCP / IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IPv4 IGMP snooping v2 and v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  Security
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS / TACACS+ login user access authentication
  • Access control list
- IPv4 / IPv6 IP-based ACL - MAC-based ACL
  • MAC security
- Static MAC - MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL
  Management
  • IPv4 and IPv6 dual stack management
  • Switch management interface
- Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance
- Firmware upload/download via HTTP / TFTP - Configuration upload / download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface link up and link down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET smart discovery utility
  • Smart fan with speed control
         A Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-8P2S is a cost-optimized, desktop-size Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 2 additional Gigabit SFP slots. With a total power budget of up to 120 watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the GS-4210-8P2S features the following special PoE management functions:
  •   PD alive check
  •   Scheduled power recycling
  •   PoE schedule
  •   PoE usage monitoring
   Intelligent Powered Device Alive-Check The GS-4210-8P2S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-8P2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-8P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-8P2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-8P2S enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-8P2S features a desktop-sized metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-8P2S is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6 / IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-8P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-8P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-8P2S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-8P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-8P2S offers comprehensive IPv4 / IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-8P2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-8P2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-8P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-8P2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the GS-4210-8P2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-8P2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-8P2T2S
IPv4/IPv6, 8-Port Managed 802.3at POE+ Gigabit Ethernet
Preis auf Anfrage
Physical Port
  • 10-Port 10/100/1000Base-T Gigabit RJ45 copper with 8-Port IEEE 802.3at/af PoE Injector (Port-1 to Port-8)
  • 2 100/1000Base-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  Power over Ethernet
  • Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 8 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
- Total PoE power budget control - Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (Static Trunk) - Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  Quality of Service
  • Ingress / Egress Rate Limit per port bandwidth control
  • Storm Control support
- Broadcast / Unknown-Unicast / Unknown-Multicast
  • Traffic classification
- IEEE 802.1p CoS - TOS / DSCP / IP Precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast
  • Supports IGMP Snooping v2 and v3
  • Supports MLD Snooping v1, v2
  • IGMP Querier mode support
  • IGMP Snooping port filtering
  • MLD Snooping port filtering
  Security
  • Authentication
- IEEE 802.1X Port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS / TACACS+ login user access authentication
  • Access Control List
- IPv4 / IPv6 IP-based ACL - MAC-based ACL
  • MAC Security
- Static MAC - MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • DoS Attack Prevention
  • SSH/SSL
  Management
  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
- Web switch management - Telnet Command Line Interface - SNMP v1, v2c and v3 - SSH / SSL secure access
  • User Privilege Levels Control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
- Firmware upload/download via HTTP / TFTP - Configuration upload / download through Web interface - Dual Images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Cable Diagnostics
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms, and events)
  • PLANET Smart Discovery Utility
  • Smart fan with speed control
  A Perfect Managed PoE+ Switch with Full PoE+ Power Budget The GS-4210-8P2T2S is the new generation of PLANET Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 8 10/100/1000Base-T ports featuring 30-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra 100/1000Base-X SFP fiber slots. Each of the eight Gigabit ports provides 30 watts of power, which means a total power budget of up to 240 watts can be utilized simultaneously without considering the different types of PoE applications being employed. It provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises.    Built-in Unique PoE Functions for Powered Devices Management As a managed PoE Switch for surveillance, wireless and VoIP networks, the GS-4210-8P2T2S features special PoE Management functions:
  •   PD Alive Check
  •   Scheduled Power Recycling
  •   PoE Schedule
  •   PoE usage monitoring
  Intelligent Powered Device Alive-Check The GS-4210-8P2T2S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-8P2T2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.   PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-8P2T2S enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-8P2T2S features a desktop-sized metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology to automatically control the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-8P2T2S is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6 / IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the GS-4210-8P2T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not to be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the GS-4210-8P2T2S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-8P2T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-8P2T2S offers comprehensive IPv4 / IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-8P2T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.   Friendly and Secure Management For efficient management, the GS-4210-8P2T2S is equipped with console, Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the GS-4210-8P2T2S offers secure remote management by supporting SSH, SSL and SNMPv3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The GS-4210-8P2T2S provides 2 extra Gigabit TP interfaces supporting 10/100/1000Base-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-5220-8P2T2S
L2+Managed 8-Port 802.3at PoE + 2-Port SFP Managed Switch
Preis auf Anfrage
  • 10-Port 10/100/1000BASE-T RJ45 copper with 8-Port IEEE 802.3at/af Power over Ethernet Injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for basic management and setup
  • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
  • Complies with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
- Total PoE power budget control - Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limitation - PD classification detection - PD alive check - PoE schedule - PD power recycling schedule
  • Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
- Broadcast / Multicast / Unknown unicast
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups, out of 4094 VLAN IDs - Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) - Private VLAN Edge (PVE) - Protocol-based VLAN - MAC-based VLAN - Voice VLAN
  • Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN - BPDU Guard
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 6 trunk groups, up to 8 ports per trunk group - Up to 16Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Layer 3 IP Routing Features
  • Supports maximum 32 static routes and route summarization
  • Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
- IEEE 802.1p CoS - TOS/DSCP/IP Precedence of IPv4/IPv6 packets - IP TCP/UDP port number - Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking
  • Multicast
  • Supports IGMP Snooping v1, v2 and v3
  • Supports MLD Snooping v1 and v2
  • Querier mode support
  • IGMP Snooping port filtering
  • MLD Snooping port filtering
  • Multicast VLAN Registration (MVR) support
  • Security
  • Authentication
- IEEE 802.1x Port-based/MAC-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - TACACS+ login users access authentication - RADIUS/TACACS+ users access authentication
  • Access Control List
- IP-based Access Control List (ACL) - MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP Snooping to filter un-trusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • Auto DoS rule to defend DoS attack
  • IP address access management to prevent unauthorized intruder
  • Management
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
- Console/Telnet Command Line Interface - Web switch management - SNMP v1, v2c, and v3 switch management - SSH/SSL secure access
  • IPv6 IP Address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
- Firmware upload/download via HTTP/TFTP - Reset button for system reboot or reset to factory default - Dual Images
  • DHCP Relay
  • DHCP Option82
  • User Privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network Diagnostic
- ICMPv6/ICMPv4 Remote Ping - Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  • SMTP/Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface Linkup and Linkdown notification
  • System Log
  • PLANET Smart Discovery Utility for deployment management 
  A Perfect Managed PoE+ Switch with Full PoE+ Power Budget PLANET GS-5220-8P2T2S is a Layer 2+ Managed Gigabit Switch, which supports both IPv4 and IPv6 protocols and Layer 3 static routing capability, and provides 8 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra 100/1000BASE-X SFP fiber slots. Each of the eight Gigabit ports provides 30 watts of power, which means a total power budget of up to 240 watts can be utilized simultaneously without considering the different types of PoE applications being employed. It provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises.    Centralized Power Management for Gigabit Ethernet PoE Networking To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the GS-5220-8P2T2S features high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all ports. It perfectly meets the power requirement of PoE VoIP phone and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater for high power consumption.   The GS-5220-8P2T2S’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time.   Built-in Unique PoE Functions for Surveillance Management As a managed PoE Switch for surveillance network, the GS-5220-8P2T2S features intelligent PoE management functions:  ■ PD Alive Check  ■ Scheduled Power Recycling  ■ SMTP/SNMP Trap Event Alert  ■ PoE Schedule    Intelligent Powered Device Alive Check The GS-5220-8P2T2S can be configured to monitor a connected PD (Powered Device) status in real time via ping action. Once the PD stops working and it is without response, the GS-5220-8P2T2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source, thus reducing administrator management burden.    Scheduled Power Recycling The GS-5220-8P2T2S allows each of the connected PDs to reboot at a specified time each week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow.    SMTP/SNMP Trap Event Alert Though most NVR or camera management software offers SMTP email alert function, the GS-5220-8P2T2S further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process.    PoE Schedule for Energy Saving Besides being used for IP surveillance, the GS-5220-8P2T2S is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the GS-5220-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget.    Solution for IPv6 Networking With the support for IPv6/IPv4 protocol, and easy and friendly management interfaces, the GS-5220-8P2T2S is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network.    IPv4 and IPv6 VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the GS-5220-8P2T2S not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application.   Robust Layer2 Features The GS-5220-8P2T2S can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The GS-5220-8P2T2S allows the operation of a high-speed trunk combining multiple ports. Supporting 6 trunk groups, it enables a maximum of up to 8 ports per trunk and supports connection fail-over as well.   Powerful Security The SGS-5220-8P2T2S offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.   Enhanced Security and Traffic Control The GS-5220-8P2T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now build highly-secure corporate networks with considerably less time and effort than before.   User-friendly Secure Management For efficient management, the GS-5220-8P2T2S is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, theGS-5220-8P2T2S offers an easy-to-use, platform independent management and configuration facility. The GS-5220-8P2T2S supports SNMP and it can be managed via any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the GS-5220-8P2T2S offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the GS-5220-8P2T2S offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session.    Flexible and Extendable Solution The 2 mini-GBIC SFP slots built in the GS-5220-8P2T2S support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-5220-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-1002VHP
8-Port 10/100/1000T 802.at PoE + 2Port Gbit Switch (120W)
Preis auf Anfrage
  • 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 52V DC power to PoE Powered Device
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode, 250m with extended mode
  Switching
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware
  • 12-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 1 silent fan to provide stable and efficient power performance
  • Support Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
  Ideal, High-performance Integration Solution for Secure IP Surveillance Infrastructure PLANET GSD-1002VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The GSD-1002VHP is equipped with 8 10/100/1000BASE-T ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 extra 10/100/1000BASE-T uplink ports with inner power system. With a total PoE power budget of up to 120 watts and non-blocking data switching performance, the GSD-1002VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small businesses and system integrators deploying Power over Ethernet networks.   LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the GSD-1002VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the GSD-1002VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.   VLAN and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. The GSD-1002VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.   In the “Extend” operation mode, the GSD-1002VHP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GSD-1002VHP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.   Two Gigabit Uplink Ports The GSD-1002VHP provides 2 extra Gigabit ports supporting 10/100/1000BASE-T RJ45 copper for IP surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management. With up to 1000Mbps transfer rate, it ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential.   Robust Protection The GSD-1002VHP protects against the ESD 4KV surge to improve product stability and also protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Easy Installation and Cable Connection As data transfer and High Power PoE are transmitted over a cable, the GSD-1002VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the GSD-1002VHP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-604HP
4-Port 10/100/1000T 802.3at POE + 2-Port 10/100/1000T (55w)
Preis auf Anfrage
  • 6x 10/100/1000Mbps Gigabit Ethernet ports
  • 4x ports support 54V DC power to PoE powered device
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 4 IEEE 802.3af/at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • 55-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • 9216 bytes jumbo packet size support
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • Automatic address learning and address aging
  • Supports port-based VLAN and loop protection
  Hardware
  • LED indicators for PoE ready and LINK/ACT
  • One 55V DC power jack
  Centralized Power Distribution for HD IP Surveillance System Solution PLANET GSD-604HP provides four 802.3at PoE+ ports for catering to small-scale IP surveillance networks at a lower total cost. With Dual 10/100/1000BASE-T uplink ports, the recorded HD video files from the 4 PoE IP cameras can be powered by the GSD-604HP and saved in the 4-channel NVR systems or surveillance software to perform comprehensive security monitoring and manage the surveillance system in the local LAN or the remote site via Internet. The GSD-604HP’s advanced features are as follows:  
    • 4-port PoE+, 55-watt PoE budget
    • Two 10/100/1000Mbps uplink ports
    • Port-based VLAN and Loop Protection features
    • Compact size, fanless design
      Two Gigabit Uplink Ports The GSD-604HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the four PoE+ ports can be used to their full potential.   Innovative Port-based VLAN and Loop Protection features The GSD-604HP features “Port-based VLAN and Loop Protection” whose ports can be isolated from each other via one DIP switch. This can help to prevent the IP camera’s multicast or broadcast storm from influencing each other. Even more, the GSD-604HP can block and protect the loop network storm from the client, thus fully meeting the requirements of the IP surveillance systems and Ethernet projects.    Environment-friendly, Fanless Design for Silent Operation The GSD-604HP comes with a desktop-sized, compact metal housing, making the placement of the unit convenient. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Moreover, the GSD-604HP is able to operate reliably and stably in any environment without affecting its performance. The deployment of PoE PDs with constant power feeding can be easily and quickly done.   Robust Protection The GSD-604HP protects against the ESD 6kV surge to improve product stability and also protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Ideal Solution for SOHO Having Secure IP Surveillance Infrastructure Targeting the growing popular IP surveillance applications, the GSD-604HP PoE+ Switch is also positioned as a Surveillance Switch for a quick and easy PoE IP camera deployment with power feeding. The GSD-604HP supports both 802.3at and 802.3af PoE standards along with 4 10/100/1000BASE-T ports featuring up to 30 watts per RJ45 copper interface, and 2 extra Gigabit Ethernet TP interfaces supporting high-speed transmission of surveillance images and videos.    Easy Cable Connection With data switching and power over Ethernet integrated into one unit, the GSD-604HP reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the GSD-604HP is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-804P
10" 8-Port 10/100/1000 + 4-Port PoE Gbit Switch unmanaged
Preis auf Anfrage
• 8-Port 10/100/1000Mbps Gigabit Ethernet ports • 4-Port supports 48V DC power to PoE Powered Device   PoE • Complies with IEEE 802.3af Power over Ethernet End-Span PSE • Up to 4 IEEE 802.3af devices powered • Supports PoE Power up to 15.4 watts for each PoE port • Auto detect powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Switching • Hardware based 10/100/1000Mbps Auto-negotiation and Auto MDI/MDI-X • Flow control for full duplex operation and back pressure for half duplex operation • Integrates address look-up engine, supporting 8K absolute MAC addresses • 9K Jumbo Frame supports at all speed (10/100/1000Mbps) • Automatic address learning and address aging   Hardware • 10-inch desktop size, rack mountable; 1U height • LED indicators for PoE ready and PoE activity • Optional Rack Ear Accessories Kit for 10-inch cabinet (RKE-10A) and 19-inch cabinet (RKE-10B) • 1 silent fan to provide stable and efficient power performance • Energy-Saving technology  - Link down power saving  - Intelligent scales power based on cable length   Centralized Power Distribution for Gigabit Ethernet Networking To fulfill the demand of sufficient PoE power for network applications with Gigabit speed transmission, PLANET has come out with a new member in the 802.3af PoE Gigabit Ethernet Switch family -- GSD-804P, the 8-Port 10/100/1000Mbps with 4-Port 802.3af Power over Ethernet Switch which features high performance Gigabit IEEE 802.3af PoE (Up to 15.4 watts) and totally 55-watt PoE budget on half of the 10/100/1000Mbps TP ports of GSD-804P. The four 802.3af PoE ports provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. The GSD-804P also provides a simple, cost-effective and non-blocking wire-speed performance with 10-inch metal shape for desktop deployment in compact housing, SOHO office or department network application.    Lead PoE Device into High-Speed Generation of Gigabit Ethernet Providing data transfer and PoE, the GSD-804P can reduce the need of extension cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. Besides, the key feature is energy saving. With more efficient switching power supply, the efficiency of the GSD-804P would be much better than four linear power adapters in the long run. Furthermore, it is the ideal device for bridging among Fast Ethernet and Gigabit Ethernet workgroups and networks. With Gigabit throughput and four 802.3af PoE interfaces supported, the GSD-804P is ideal for small business and workgroups to efficiently deploy the PoE network for the wireless access points, IP-based surveillance camera or IP phones in any places.   Excellent Ethernet Traffic Transmission Ability The GSD-804P features high performance switch architecture capable of providing the non-blocking 16Gbps switch fabric and wire-speed throughput as high as 11.9Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x Full-Duplex flow control function of the GSD-804P enables PD devices and servers directly connect to the Switch for wire-speed packet transfer performance without risk of packet loss.   Energy-Saving The GSD-804P uses new engine that provides energy saving up to 40% less energy than the normal switch and remains the superior performance. The GSD-804P incorporates two advanced Green Networking technologies:
    • Idle Mode Link Down power saving
    • Intelligent Scales Power based on cable length
The Idle mode Link Down power saving of the GSD-804P complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent Scales Power technology actively determines the appropriate power level based on the cable length. When connecting to the GSD-804P with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSD-804P would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce overall power consumption, which makes a significant contribution to energy saving.   Easy Cable Connection. All RJ-45 copper interfaces in the GSD-804P support 10/100/1000Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-808HP
13"8-Port 10/100/1000bps 802.3at PoE Desktop Switch
Preis auf Anfrage
  • 8 10/100/1000Mbps Gigabit Ethernet ports
  • 8-Port supports 52V DC power to PoE Powered Device
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE
  • Up to 8 IEEE 802.3af / IEEE 802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • PoE Usage Alarm LED
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • 9K Jumbo Frame supports all speeds (10/100/1000Mbps)
  • Automatic address learning and address aging
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
  Hardware
  • 12-inch desktop size, 1U height
  • LED indicators for PoE ready, PoE activity and PoE Usage Alarm
  • Fanless design
  • Ethernet Link Energy-Saving technology
- Link down power saving - Intelligent scales power based on cable length   High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit transmission, PLANET GSD-808HP.3at PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the GSD-808HP features IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) that combine up to 130-watt PoE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling PoE power, more than the current conventional 802.3af PoE.    Automatic PoE Management To facilitate power management, the GSD-808HP implements powerful PoE intelligent features:
    • PoE Power Usage Threshold Alarm
    • PoE Power Budget Control
The GSD-808HP is equipped with two orange LEDs located on the left side of the GSD-808HP front panel. These are PoE Power Usage indicators. 1-4 means that it is counting from port 1 to 4 of PoE output, while 5-8 means that it is counting from port 5 to 8 of PoE output. The LED will light up to show 80% when 1-4 or 5-8 PoE output is over 80%, and if 1-4 or 5-8 PoE output is over 95%, the LED will blink to warn customers. With these LED indications, you can monitor the current PoE power usage status of the GSD-808HP easily and efficiently.    Energy-Saving The GSD-808HP uses new engine that incorporates advanced Green Networking technologies:
    • Idle Mode Link Down power saving
    • Intelligent Scales Power based on cable length
The Idle Mode Link Down power saving of the GSD-808HP complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked.   Easy Installation & Cable Connection Providing data transfer and High Power PoE in one unit, the GSD-808HP is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort.    All RJ45 copper interfaces of the GSD-808HP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSD-908HP
8-Port 10/100/1000 Gbit 802.3at POE +1Port Gbit
Preis auf Anfrage
  •  Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
  • 9-Port 10/100/1000Mbps Gigabit Ethernet Switch
  • 8-Port supports 51V DC power to PoE Powered Device (Port 1 to port 8)
  Power over Ethernet
  • Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
  • 120-watt PoE budget
  • Up to 8 IEEE 802.3af devices powered
  • Supports PoE Power up to 15.4 watts for each PoE port
  • Up to 4 IEEE 802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  Switching
  • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • 192 KB packet buffer
  • 9K Jumbo frame supports at 1000Mbps duplex mode
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
  Hardware
  • Made of metal, desktop size and wall-mount design
  • LED indicators for system power, PoE usage 100%, per port PoE In-Use (Port 1 to port 8), per port Link / Act (10/100/1000Mbps,
   port 1 to port 9).
  • 51V DC, 2.5A external power adapter
  • FCC, CE Class A compliant
      Centralized Power Distribution for Ethernet Networking The GSD-908HP, a new member in the PLANET 802.3af / 802.3at PoE Unmanaged Gigabit Ethernet Switch family, is an 8-port 10/100/1000T 802.3at Power over Ethernet + 1-port 10/100/1000T Desktop Switch with a total of 120 watts of PoE budget, which is an ideal solution to fulfilling the demand of sufficient PoE power for network applications with Gigabit Ethernet speed transmission. The eight 802.3af / 802.3at PoE Gigabit ports provide PoE power injector function which is able to drive 8 IEEE 802.3af compliant powered devices or 4 IEEE 802.3at compliant powered devices. The GSD-908HP also provides a simple, cost-effective and non-blocking Gigabit wire-speed performance. It comes with a metal compact housing, suitable for desktop deployment in SOHO office or department network application.    Perfectly Integrated Solution for PoE IP Camera and NVR System Different from the general PoE Switch which usually comes with 12 or 24 PoE ports, the GSD-908HP provides eight 802.3af / 802.3at PoE Gigabit ports for catering to small scale of IP surveillance networks at a lower total cost. The GSD-908HP comes with high performance switch architecture and 120-watt PoE power budget. The recorded video files from 8 PoE IP cameras can be powered by the GSD-908HP and saved in the 8-channel NVR system or surveillance software to perform comprehensive security monitoring. For instance, one GSD-908HP can be combined with one 8-channel NVR and 8 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.    Stable and High Performance Switch Architecture The GSD-908HP has a 4K MAC address table, featuring high performance switch architecture capable of providing the non-blocking 18Gbps switch fabric and wire-speed throughput as high as 13.3Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x full-duplex flow control function of the GSD-908HP enables PD devices and servers to be directly connected to the switch for wire-speed packet transfer performance without the risk of packet loss.   Easy Cable Connection With data and power over Ethernet from one unit, the GSD-908HP reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. Providing 8 PoE interfaces, the GSD-908HP is ideal for small businesses and workgroups requiring the PoE deployment of wireless access points, IP-based surveillance camera or IP phones in any places with ease, efficiency and cost-effectiveness.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - GSW-1222VUP
8-Port 10/100/1000T 60W UltraPoE + 2-Port 10/100/1000T + 2-Port 1000X SFP Switch
Preis auf Anfrage
  • 8 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
  • 2 10/100/1000BASE-T TP ports
  • 2 1000BASE-X mini-GBIC SFP interfaces
  Power over Ethernet:
  • Ultra Power over Ethernet end-span/mid-span PSE
  • Up to 60 watts of power on 4-pair UTP
  • Backward compatible with IEEE 802.3at/af PD device
  • Up to 8 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE devices powered
  • 54V DC, 60-watt PoE power output at maximum on each port
  • 380-watt PoE budget
  • Auto-detection of IEEE 802.3at/af PoE equipment and device to avoid possible damage by incorrect installation
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  Hardware:
  • 19-inch size, 1U height, rack mounting
  • LED indicators for system power, per port PoE ready and PoE activity, speed Link/Act
  • LCD monitor for system status and PoE usage status display
  • 3 silent smart fans designed to provide stable and efficient power performance
  Ready to Deploy Next Generation Power over Ethernet: PLANET has recently announced a complete 60W Ultra PoE Solution, such as 60W Ultra PoE Injector/Splitter, 60W Ultra PoE Extender and 60W Ultra PoE Injector Hub. One of them in the PLANET ultra PoE product series family is the GSW-1222VUP.   A new family member of PLANET 60W Ultra PoE Solution, the GSW-1222VUP is an 8-port 10/100/1000T Ultra PoE + 2-port 10/100/1000T + 2-port 1000X SFP Gigabit Ethernet Switch with a total of 380 watts of PoE budget. One special feature that this unit has is the LCD display for PoE work status monitoring. Each PoE port can deliver up to 60-watt power over Cat.5e/6 Ethernet UTP cables which allow data and power to transmit simultaneously to a remote 60W or standard 802.3at compatible powered device (PD) for different kinds of PoE applications, respectively.   The GSW-1222VUP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.    60 Watts of Power over 4-pair UTP System: The GSW-1222VUP Ultra PoE solution adopts the IEEE 802.3at PoE standard. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat.5e/6 Ethernet cabling. In the new 4-pair system, the GSW-1222VUP is able to deliver per port 60watts of power to each remote PoE compliant powered device.    The amount of power capability that the GSW-1222VUP possesses doubles that of the conventional 802.3at PoE, thus making an ideal solution to meeting the growing demand for higher power consuming network PDs, such as:  
  • PoE PTZ speed dome
  • Any network device that needs higher PoE power to work normally
  • Thin-client
  • AIO (all-in-one) touch PC, point of sale (POS) and information kiosks
  • Remote digital signage display
     LCD Monitor for Real-time PoE Usage and System Status Display: The LCD monitor of the GSW-1222VUP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the GSW-1222VUP directly. Also the Power Budget Control function helps to prevent power budget overloading.    Flexible and Extendable Two Gigabit Uplink Solution: The GSW-1222VUP provides two extra Gigabit TP ports and two extra Gigabit SFP interfaces. The two Gigabit TP ports support 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server and NAS to facilitate surveillance management. Or through two Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), or even going up to 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Smart Fan Design for Silent Operation: The GSW-1222VUP features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically activates 3 fans once the PoE budget reaches 126 watts and maintains the temperature of the GSW-1222VUP for optimal power output capability. The GSW-1222VUP is able to operate reliably, stably and quietly in any environment without affecting its performance.   Robust Protection: The GSW-1222VUP provides contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Quick and Easy PoE Network Deployment: As data transfer and high power PoE are transmitted over a cable, the GSW-1222VUP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the GSW-1222VUP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Verfügbarkeit:
mehr Informationen
zu Favoriten