Standard

• Complies with IEEE 802.3 10Base-T
• Complies with IEEE 802.3u 100Base-TX
• Complies with IEEE 802.3ab 1000Base-T
• Complies with IEEE 802.3z 1000Base-SX / LX
• IEEE 802.3x Full-duplex Flow-Control, Back-Pressure in Half-duplex eliminate packets loss

  Interface

• Dual 1000Base-SX / LX SFP Fiber-Optic Slots
• One 10/100/1000Base-T Copper, auto MDI/MDIX function
• Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, Full-duplex for 1000Mbps
• Supports maximum frame size up to 1522 bytes
• IEEE 802.1Q Tag VLAN Transparent, Multicast pass-through

  Redundancy

• Link status auto-detecting and redundant on Dual ports with the same connector type
• Allows only the Primary-Port or the Backup-Port active at a time

- When the Primary-Port link fail occurs, the traffic swaps to Backup-Port automatically - Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port

• Hardware fiber port redundant

  Mechanical

• External 5V / 2A DC power supply
• LED indicators for easy network diagnose
• DIP switch for 3-port operation with Gigabit switch mode or redundant mode
• Compact in size, easy installation
• Co-works with PLANET 10”/19” Media Converter Chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
• Wall mounting and DIN-Rail installation supported

  PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit SFP slots, strengthened redundant function, and other features shown below:

• DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode
• Hardware Fiber Port Redundant

  Highly Convenient and Distance Extendable The GT-1205A is equipped with one 10/100/1000Base-T port and dual Gigabit SFP slots to support conversion between 10/100/1000Base-T and 1000Base-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m, 10km or longer, depending on the optional 1000Base-SX / LX SFP transceiver modules.      Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port Redundant Media converter. With the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.    Easy Deployment Standalone or with Chassis The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function.   Plug & Play Installation As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature 　–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 　–Supports auto MDI/MDI-X function 　–Store-and-Forward mechanism 　–Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: 　–Multi-mode fiber using SC/LC/WDM connector; 　–Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base 　SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature 　–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 　–Supports auto MDI/MDI-X function 　–Store-and-Forward mechanism 　–Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: 　–Multi-mode fiber using SC/LC/WDM connector; 　–Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base 　SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate   • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector   • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.