SHOP

Hersteller PLANET

Breitband Kommunikation
Hersteller
PLANETPLANET
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
Produktfamilie
ADSL / ADSL 2/2+ IP DSLAMADSL / ADSL 2/2+ IP DSLAMADSL / ADSL 2/2+ Modem/RouterADSL / ADSL 2/2+ Modem/RouterEthernet over VDSL2 Converter, RouterEthernet over VDSL2 Converter, RouterInternet Broadband Router, Fiber RouterInternet Broadband Router, Fiber RouterVDSL 2 Switch / IP DSLAMVDSL 2 Switch / IP DSLAM
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, PLANET - GPL-8000
8-Port GPON OLT w/ 4-Port Gigabit TP/SFP Combo + 4x 1000X SFP + 4x 10G SFP+
Preis auf Anfrage
  • 8x GPON OLT SFP slots
  • Up to 2.5Gbps downstream and 1.25Gbps upstream
  • Maximum transfer distance of up to 20km
  • Each PON port supports up to 128 ONT/HGU
  • Compliant with G.984/G.988 
Physical Ports:
  • 4x 10/100/1000BASE-T RJ45 copper ports
  • 8x 100/1000BASE-X SFP slots
  • 4x 10GBASE-SR/LR SFP+ slots
  • RJ45 to DB9 console interface for switch basic management and setup
  • 1x 10/100BASE-TX Management port 
OLT Management:
  • User-friendly GUI management
  • 2 control interfaces
    • Out-of-Band IP – the management RJ45 port
    • In-Band IP – the Gigabit TP, SFP and 10G SFP+ uplink ports
  • Supports ONT/HGU authentication; averts illegal ONT access to network 
ONT/HGU Management:
  • ONT/HGU port control
  • ONT/HGU VLAN mode 
IP Routing Features:
  • Supports dynamic routing protocol: RIP and OSPF
  • IPv4 static routing
  • Routing interface provides per VLAN routing mode 
Layer 2 Features:
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN
    • Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
    • GVRP for dynamic VLAN management
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    • RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    • MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to 1)
  • Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  • Loop protection to avoid broadcast loops
  • Link Layer Discovery Protocol (LLDP) 
Quality of Service:
  • Ingress shaper and egress rate limit per port bandwidth control
  • 8 priority queues on all switch ports
    • IEEE 802.1p CoS/DSCP/Precedence
    • VLAN ID
    • Policy-based ingress and egress QoS 
Multicast:
  • Supports IPv4 IGMP snooping v1, v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • Querier mode support
  • MVR (Multicast VLAN Registration) 
Security:
  • Authentication
    • IEEE 802.1x port-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List (ACL)
    • Time-based ACL
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks 
Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console and Telnet Command Line Interface 
    • HTTP web switch management
    • SNMP v1 and v2c switch management
    • SSHv2, SSLv3, TLSv1.0 and SNMP v3 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events) 
    • SNMP trap for interface Link Up and Link Down notification
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP
    • Reset button for system reboot or reset to factory default
    • Dual images
  • DHCP Functions:
    • DHCP Relay
    • DHCP Option 82
    • DHCP Server
  • User Privilege levels control
  • Network Time Protocol (NTP) and SNTP
  • Network Diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
    • ICMP remote IP ping
  • Syslog remote alarm
  • System Log

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GPN-100
GPON SFU ONT with 1GbE Port1
Preis auf Anfrage
  • 1 SC type GPON port 
  • Up to 2.5Gbps downstream and 1.
  • 25Gbps upstream 
  • Maximum distance of up to 20km
  • Compliant with ITU-T G.984/988 standards
  • LED indicators for link status 
Physical Hardware:
  • 1x 10/100/1000Mbps Gigabit port
  • 1 reset button
  • 1 power switch 
GPN-100 Features:
  • AES128 algorithm encryption
  • Dynamic bandwidth allocation (DBA) support 
  • Service level agreement (SLA) support
  • Four priority queues
  • WRR, strict priority and FIFO queue schedule algorithms
  • Supports IEEE 802.3x flow control

Perfectly Designed for FTTx Applications:
PLANET GPN-100 is a GPON Optical Network Terminal (ONT) equipped with one GPON port and one Gigabit Ethernet RJ45 interface. When functioning with PLANET GPON Optical line Terminal (OLT), the GPN-100 provides highly-effective GPON solutions for FTTx and multi-service networks. The GPN-100 complies with GPON ITU-T G.984/G.988 standards and PRC communications industrial standards for GPON Access technology requirements. With Plug and Play design, it’s easy for the installation and maintenance of GPON deployment. Excellent Access Capacity:
The GPN-100 supports PON downstream and upstream transmission rates of 2.5Gbps and 1.25Gbps, respectively. Connected with PLANET GPON OLT – GPL-8000, it can realize 1:128 split ratio. The covering radius of the network can reach  up to 20km. High-service Control Capability:
The GPN-100 supports advanced DBA (dynamic bandwidth allocation), rate limit and accurate bandwidth limit, which enable users to share 2.5Gbps bandwidth resource appropriately. It also supports QoS function, which guarantees a reliable service quality and service priority. Advanced Energy-saving Technique:
PLANET GPN-100, adopting the advanced green networking technology, consumes very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently. Cost-effective Passive Optical Network Connection Solution:
With increasing network services such as HDTV, IPTV, voice-over-IP (VoIP) and multimedia broadband applications, the demand for broadband communication has grown quickly. PON is the most promising NGN (next generation networking) technology to meet the needs. As compared to other broadband access technologies such as xDSL and cable modem, PON technology offers competitive advantages including a long-term life expectancy of the fiber infrastructure, lower operating costs through the reduction of “active” components, support of long distance of up to 20km between equipment nodes, and most importantly, offer of much greater bandwidth.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GPN-400ACV
GPON HGU with 4-Port GbE, 1200Mbps 802.11AC Wireless and 2-Port FXS (1 x USB)
Preis auf Anfrage
  • 1 x SC/UPC type GPON port
  • Up to 1.25Gbps upstream and 2.5Gbps downstream
  • Up to 20km
  • Supports 128-bit triple churning algorithm 
Ethernet:
  • Supports 802.1Q VLAN, QoS
  • Supports broadcast storm protection
  • Supports bandwidth control
  • Supports IGMP snooping/proxy
  • Supports IPv4/IPv6 
VoIP:
  • Supports G.711 a/u law, G.723, G.729 code/decode 
  • Supports T.38 (G.711 Fax pass-through)
  • Supports SIP/H.248/MGCP 
Wireless:
  • Up to 1200Mbps bandwidth
  • Compatible with 802.11b/g/n/ac
  • Compatible to equipment working on 2.4GHz & 5GHz
Physical Hardware:
  • 4 x 10/100/1000Mbps Gigabit Ethernet port
  • 2 x FXS port
  • 2 x 5dBi 2.4GHz and 2 x 5dBi 5GHz antenna 
Features:
  • Dynamic Bandwidth Allocation (DBA) support 
  • Enhanced IGMP feature
  • Supports Layer 2/3/4 classification rules
  • Supports IEEE 802.3x flow control

Delivering High-Demand Service Connectivity for ISP / Triple Play Devices:
PLANET GPN-400ACV is a GPON Wi-Fi ONU (Optical Network Unit) equipped with one GPON port, four 10/100/1000Mbps RJ45 LAN ports and two FXS RJ11 interfaces. It is also a high-end line with IEEE 802.11ac/n standard multi-terminal product. It provides residential and office users with the ideal solution for sharing an ultra high-speed fiber optic broadband connection. When functioning with PLANET GPON Optical Network Terminal (OLT) GPL-8000, the GPN-400ACV provides highly-effective GPON solutions for FTTH network. Perfectly Designed for Fiber to the Home Applications:
PLANET GPN-400ACV is a fiber to the home (FTTH) broadband access equipment type. With built-in 1.25Gbps GPON fiber interface, the GPN-400ACV supports different optic types for WAN and the distance can be up to 20km through the fiber connection. It can handle multiple high-throughput services such as IPTV, on-line gaming, VoIP and Internet access, and keep the bandwidth usage smoothly via its QoS features. Thus, with advantages of high reliability and scalability, the GPN-400ACV can further be applied in the network of SOHO (small office or home office) or small businesses that provide high-performance access services.  High-Speed 802.11ac Wireless:
PLANET GPN-400ACV Wireless Broadband Router supports IEEE 802.11a/b/g/n/ac standard, dual band, and Gigabit LAN and WAN, thus providing the wireless speed of 867Mbps in the 5GHz frequency band and 300Mbps in the 2.4GHz frequency band at the same time. With its outstanding stability of high-speed wireless transmission and enhanced reliability, the GPN-400ACV can provide users with excellent multimedia streaming through their mobile devices anywhere, anytime in the home and office. Gigabit LAN Throughput Boosts Network Traffic:
Improving communication speed is one of the major requirements of today’s Gigabit local area networks. With throughput up to 10 times faster than the existing 100Mbps solution, the GPN-400ACV fully employs the full functionality of the 802.11ac wireless standards, eliminating the bottleneck of the transmission speed of the megabit wired type. Using the GPN-400ACV to connect your desktop, NAS, media player and game console guarantees extremely high throughput and excellent signal quality. Standard Compliance with FXS Port:
The GPN-400ACV provides two FXS ports that can easily integrate with general voice over IP system. The GPN-400ACV makes it simple for the enterprise featuring voice and data system or expanding voice system to new locations. It helps you to save money on long-distance calls; for example, the remote users can dial in through a Unified VoIP Communication System just like an extension call but no long-distance call charge would occur. IPv6/IPv4 Dual Stack Capability:
With fully supporting both IPv4 and IPv6 protocols, the GPN-400ACV can work with the original IPv4 network structure and also support the new IPv6 network structure now and in the future. As more network devices are growing and the need for larger addressing and higher security becomes critical, the GPN-400ACV is the best choice for ISPs to build the IPv6 FTTx edge service to connect with the IPv6 network.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-231
100/100 Mbps Ethernet to VDSL2 Converter - 30a profile
Preis auf Anfrage
- Kosteneffiziente VDSL2 Profil 17a/30a CO / CPE Brückenlösung
nur kompatibel mit VC-201A/204/231 und 234 - Ein-Gehäuse-Design, CO / CPE wählbar über DIP-Schalter
- Definiert einen symmetrischen Bandplan für die Übertragung von Upstream- und Downstream-Signalen
- Entspricht IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX und IEEE 802.3x, Flow control Ethernet
 Normen
- DMT (Diskreter Mehrton) Leitungscodierung
- Halbduplex-Rückdruck und IEEE 802.3x-Vollduplex-Pausenrahmen-Flusskontrolle
- Ein RJ-11-Anschluss für VDSL-Port mit VDSL-Anschluss, zusätzlicher Splitter für POST-Anschluss
- Sprach- und Datenkommunikation können gleichzeitig auf Basis der vorhandenen Telefonleitung genutzt werden
- Ein 10/100Mbps RJ-45 Anschluss, Auto-Negotiation und Auto-MDI/MDI-X
- Unterstützt bis zu 1536 Bytes Paketgröße, IEEE 802.1Q VLAN Tag transparent
- VDSL2 Stand-Alone-Transceiver für einfache Bridge-Modem-Anwendung
- Vorteil der minimalen Installationszeit (einfach als Plug-and-Play)
- Wählbares Zielprofil und Ziel-SNR-Marge
- Unterstützt umfangreiche LED-Anzeigen zur Netzwerkdiagnose
- Arbeitet mit den Media Chassis der PLANET MC-Familie zusammen (MC-700 / MC-1500/ MC-1500R / MC-1500R48)
- Kompakte Größe, einfache Installation
100/100Mbps Downstream / Upstream, Hochleistungs-Ethernet über VDSL Lösung
PLANET VC-231 ist ein Ethernet-over-VDSL2-Konverter mit hoher Leistung. Er wurde auf der Grundlage von zwei zentralen Netzwerktechnologien entwickelt: Ethernet und VDSL2 (Very-high-data-rate Digital Subscriber Line 2). Die VDSL2-Technologie bietet die absolut schnellste Datenübertragungsgeschwindigkeit über bestehende Kupfertelefonleitungen, ohne dass eine Neuverkabelung erforderlich ist. Der VC-231 unterstützt Ultra-High-Performance für das flächendeckende Telefonleitungsnetz mit bis zu 100/100Mbps symmetrischer Datenrate innerhalb von 300m und 50/2Mbps für 1,4km lange Verbindungen.
Implementierung mit bestehenden Telefon-Kupferdrähten
Der VC-231 ist auch ein Long Reach Ethernet (LRE) Konverter mit einem RJ-45 Ethernet Port und einer RJ-11 Telefonbuchse, die für VDSL2 Verbindungen geeignet ist. Mit dem zusätzlichen Splitter aus dem VC-231-Paket kann der Splitter einen POTS-Splitter bereitstellen, um die vorhandene Telefonleitung mit POTS zu teilen; daher ist es nicht notwendig, die vorhandene Kupferleitung zu ersetzen. Stecken Sie den VC-231 mit zusätzlichem Splitter einfach in die vorhandene RJ-11-Telefonbuchse und schon kann ein leistungsstarkes VDSL2-Netz angeschlossen werden. Der VC-231 ist ideal als Ethernet-Extender für ein bestehendes Ethernet-Netzwerk geeignet.
Bereitstellung von anspruchsvollen Servicekonnektivität für ISP-/Triple-Play-Geräte
Der VC-231 bietet eine exzellente Bandbreite, um Triple-Play-Geräte für Home Entertainment und Kommunikation zu bedienen. Mit der Fähigkeit zur symmetrischen Datenübertragung von 100/100Mbps ermöglicht der VC-231 die Nutzung vieler Multimedia-Dienste über das lokale Internet, wie z.B. VOD (Video on Demand), Voice over IP, Videotelefonie, IPTV, Internet-Caching-Server, Fernunterricht und so weiter.
Einfache und flexible Installation
Der Ethernet-over-VDSL2-Konverter verfügt über ein Plug-and-Play-Design und ist vollständig kompatibel mit allen Arten von Netzwerkprotokollen. Darüber hinaus kann der Betriebsstatus jedes einzelnen Ports und des gesamten Systems über die zahlreichen Diagnose-LEDs an der Vorderseite überwacht werden. Der VC-231 bietet zwei Betriebsarten, CPE und CO, für die Anwendung: Der CPE-Modus wird auf der Client-Seite verwendet und der CO-Modus auf der zentralen Seite. Der CPE- oder CO-Modus kann mit Hilfe eines eingebauten DIP-Schalters eingestellt werden. Für Punkt-zu-Punkt-Verbindungen müssen ein VC-231 im CPE-Modus und ein VC-231 im CO-Modus als ein Wandlerpaar eingerichtet werden, um die Verbindung herzustellen.
Hervorragende Upstream- und Downstream-Übertragungsleistung
Der VC-231 definiert auch einen symmetrischen Bandplan für die Übertragung von Upstream- und Downstream-Signalen, der im symmetrischen Modus eine höhere Übertragungsqualität im Nahbereich für die zentrale Seite (CO) bietet. Wenn der VC-231 im Profil 17a betrieben wird, bietet er Langstreckenübertragung mit Ultra-High-Performance für das weitverzweigte Telefonnetz, und wenn der VC-231 im 30a-Betriebsmodus betrieben wird, bietet er Kurzstreckenübertragung mit Upstream- und Downstream-Übertragung mit Wire Speed Performance.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-231G
10/100/1000 Mbps Ethernet to VDSL2 Bridge - 30a profile w/ G.vectoring
Preis auf Anfrage
  • ITU-T G.993.5 G.vectoring and G.INP
  • DMT-based coding technology
  • Built-in POST splitter to share voice and date
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
  • 1 10/100/1000BASE-TX LAN ports
  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
  • Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
  • One RJ11 connector for VDSL port with VDSL connection
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • Supports a packet size of up to 9K bytes, IEEE 802.1Q VLAN tag transparency
  • VDSL2 standalone transceiver for simple bridge modem application
  • Advantage of minimum installation time (Simply by Plug-and-Play)
  • Supports extensive LED indicators for network diagnosis
  • Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
  • Compact in size and easy to install
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-231GP
1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter
Preis auf Anfrage
  • 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE Injector
  • 1 RJ11, connector for xDSL port with VDSL2 or ADSL2+ connection
     
Power over Ethernet:
  • Complies with IEEE 802.3at/af PoE Plus end-span PSE
  • Supports PoE power up to 30.8 watts per PoE port
  • Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port
  • Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
  • Remote power feeding up to 100m
  • IEEE 802.3at/af splitter devices compatible 
VDSL2 Features:
  • VDSL2 stand-alone transceiver for simple bridge modem application
  • Cost-effective bridge function to connect two Ethernet LANs
  • Point-to-multipoint application: Compatible with PLANET and third-party VDSL2 IP DSLAM for last-mile solution
  • Point-to-point application: LAN to LAN extension over phone wire
  • Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
  • Voice and data communication can be shared simultaneously based on the existing telephone wire with distance up to 1.4km
  • ITU-T G.993.2 VDSL2 standard
  • ITU-T G.993.5 G.Vectoring and G.INP
  • DMT-based coding technology 
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan (symmetric and asymmetric) and SNR margin
  • Supports IEEE 802.1Q VLAN tag transparency
Hardware and Installation:
  • Compact size, wall-mountable design; ideal solution for space-limited locations
  • Advantage of minimum installation time (Simply by Plug and Play)
  • Metal case, good for heat sinking
  • Supports extensive LED indicators for network diagnosis
  • Additional POTS splitter to share voice and data
  • Supports 6KV DC Ethernet ESD protection

PoE Plus High Performance Gigabit Ethernet over Phone Wire Solution: The VC-231GP, a PLANET Long Reach Ethernet (LRE) solution, is a Single-port Gigabit Ethernet-over-VDSL2 Converter with PoE injector function that is installed at a remote location connecting and injecting power to a PoE IP camera, PoE wireless AP, or PoE IP VoIP phone/door phone. It is integrated with three advanced technologies:
  • VDSL2/ADSL2+ Digital Subscriber Line technologies
  • Gigabit Ethernet
  • IEEE 802.3at Power over Ethernet Plus
     
The VC-231GP works with PLANET VDSL2 converters or multiple-channel VDSL2 switches to be able to simultaneously transmit Ethernet data over a distance of up to 1.4km (4,593ft) over phone wire. The VC-231GP forwards the Ethernet data and provides a maximum of 30-watt power output over an additional 100m UTP cable to a remote IP device complied with 802.3af/at PoE PD (powered device) for network deployment. Users have the ability to grow the structure of the current networks simply with even more flexibility. IEEE 802.3at Power over Ethernet Plus: The PoE in-line power following the IEEE 802.3at Power over Ethernet Plus standard makes the VC-231GP able to deliver Gigabit speed Ethernet data and up to 30 watts of power to remote PoE PDs over one Cat.5E/6 Ethernet cable. The VC-231GP provides more flexibility in power requirements for all kinds of PDs at affordable installation costs. 150/150Mbps Downstream/Upstream High Performance Gigabit Ethernet over Phone Wire: Via the latest VDSL2 technology, the VC-231GP offers selectable asymmetric/symmetric band profile capability. It works well with a pervasive telephone line network with a symmetric data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 21/11Mbps over a long distance of 1.4km. PLANET Gigabit Ethernet over VDSL2 series offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.  Versatile, Flexible and Easy Installation: PLANET Gigabit Ethernet-over-VDSL2 converters come with a plug-and-play design. The VC-231GP offers two operation modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, the VC-231GP in the CPE mode and  the VC-231G or VC-234G in the CO mode must be set up as one pair of converters to perform the connection. It gives administrators the ability to reply a fresh local Intranet in various locations by utilizing the original network structure without additional costs. Stable and Reliable DSL Data Connection: With the integrated support for the ITU-T’s new G.993.5 Vectoring technology, the VC-231GP works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure. Implementing with Existing Telephone System: Use the additional splitter from the package of the VC-231GP to share the existing phone line with POTS, thus replacing the existing copper wiring is not necessary. Just plug the VC-231GP with the additional splitter into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. It is ideal for use as an Ethernet extender to an existing Ethernet network.  ADSL2+ Fallback: For those ISPs that still provide ADSL broadband service, the VC-231GP can support transmission rates up to 24Mbps downstream and 1Mbps upstream with the ADSL2+ technology. The VC-231GP establishes a connection with ISP and can be also directly switched over to VDSL2 after the ISP network upgrade.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-234
100/100 Mbps Ethernet (4-Port LAN) to VDSL2 Bridge
Preis auf Anfrage
• Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution • One box design, CO / CPE selectable via DIP Switch • Defines symmetric band plan for the transmission of upstream and downstream signals • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet  standards • DMT (Discrete Multi-Tone) line coding • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control • Built-in POTS splitter to share voice and data • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection • Voice and data communication can be shared simultaneously based on the existing telephone wire • Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent • Hardware IGMP Snooping for Multimedia service • VDSL2 stand-alone transceiver for simple bridge modem application • Advantage of minimum installation time (Simply as Plug-and-Play) • Selectable target profile and target SNR margin • Supports extensive LED indicators for network diagnosis   100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-234 is an Ethernet-over-VDSL2 Bridge with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-234 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 20/4Mbps for 1.4km long range connections.     Implementing with Existing Telephone Copper Wires The VC-234 is also a Long Reach Ethernet (LRE) Bridge providing four RJ-45 Ethernet ports and two RJ-11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234 has built-in POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-234 into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234 is ideal to be used as an Ethernet extender to an existing Ethernet network.   Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-234 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-234 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.   Easy & Flexible Installation The Ethernet-over-VDSL2 Bridge comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-234 and a CO mode VC-234 must be setup as one pair of converters to perform the connection.   Providing Superior Upstream and Downstream Transmission Performance The VC-234 also defines symmetric band plan for the transmission of upstream and downstream signals; the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-234 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-234 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-234G
4-Port 10/100/1000T Ethernet to VDSL2 Bridge - 30a profile w/ G.vectoring, RJ11
Preis auf Anfrage
  • ITU-T G.993.5 G.Vector and G.INP
  • DMT-based coding technology
  • Built-in POST splitter to share voice and date
  • One RJ11 connector for VDSL port with VDSL connection
  • One phone connector for telephone connection
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • Up to 200/100Mbps (G.INP, Asym, 8dB) bandwidth
  • 4 10/100/1000BASE-TX LAN ports
  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
  • Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
  • Supports IEEE 802.1Q VLAN tag transparency
  • VDSL2 stand-alone transceiver for simple bridge modem application
  • Advantage of minimum installation time (Simply Plug-and-Play)
  • Supports extensive LED indicators for network diagnosis
  • Compact in size and easy to install

High Performance Gigabit Ethernet over Phone Wire Solution:
PLANET VC-234G, a new-generation and high-performance Gigabit Ethernet-over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric (downstream/upstream) data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 20/12Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.
With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-234G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper telephone infrastructure. Implementing with Existing Telephone Copper Wires:
The VC-234G is also a Long Reach Ethernet (LRE) Bridge providing four RJ45 Ethernet ports and two RJ11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234G has a built-in POTS splitter to share the existing phone line with POTS; therefore, there is no need to replace the existing copper wiring. Just plug the VC-234G into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234G is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-demand Service Connectivity for ISP/Triple Play Devices:
The VC-234G provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 200/100Mbps (G.INP, Asym, 8dB) asymmetric data transmission, the VC-234G enables many multi-media services to work on the local Internet, such as VoD (video on demand), voice over IP, video phone, IPTV, Internet caching server, distance education, and so on. Easy and Flexible Installation:
The Ethernet-over-VDSL2 Converter comes with a Plug-and-Play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234G offers two modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For the point-to-point connection, a CPE mode and a CO mode must be set up as one pair of converters to perform the connection.   ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the VC-234G can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The VC-234G can also be directly switched over to VDSL2 after the network upgrade.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /