• 24x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• 4x QSFP28 slots, each supports native 100 Gigabit Ethernet, 40G and 4 x 10 Gigabit Ethernet modes
• RJ45 to DB9 console interface for switch basic management and setup

  IP Routing Features:

• Supports maximum 128 static routes and route summarization
• Supports dynamic routing protocol: RIP and OSPF

  Layer 2 Features:

• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
• IEEE 802.3x pause frame flow control in full-duplex mode
• Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
• 32KC MAC address table, automatic source address learning and aging
• Supports VLAN
• IEEE 802.1Q tag-based VLAN
• GVRP for dynamic VLAN management
• Up to 4094 active VLANs
• Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
• Private VLAN Edge (PVE) supported
• GVRP protocol for Management VLAN
• Protocol-based VLAN
• MAC-based VLAN
• Supports Link Aggregation
• Maximum 32 trunk groups with up to 8 ports per trunk group
• IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
• STP, IEEE 802.1D (Classic Spanning Tree Protocol)
• RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
• MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
• BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)

  Quality of Service:

• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
• IEEE 802.1p CoS/ToS
• IPv4/IPv6 DSCP
• Port-based WRR
• Strict priority and WRR CoS policies

  Multicast:

• Supports IPv4 IGMP snooping v1, v2 and v3; and IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)

  Security:

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

  Management:

• Management IP for IPv4 and IPv6
• Switch Management Interface
• Console/Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c and v3 switch management
• SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
• Supports ping, trace route function for IPv4 and IPv6

   

• 24-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management and setup
• 1 RJ45 Ethernet management port for switch basic management and setup
• 1 USB 2.0 for backup/upload configuration and firmware upgrade

  IP Stacking:

• Connects with stack member via both Gigabit TP/SFP interface and 10G SFP+ slots
• Single IP address management, supporting up to 24 units stacked together

  IP Routing Features:

• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
• Routing interface provides per VLAN routing modeVRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution

  Multicast Routing Features:

• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2

  Layer 2 Features:

• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet and IEEE 802.3ae 10Gb/s Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
• IEEE 802.3x pause frame flow control in full-duplex mode
• Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
• 16K MAC address table, automatic source address learning and aging
• Supports VLAN
• IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management
• Up to 256 VLANs groups, out of 4041 VLAN Ids
• Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
• Private VLAN Edge (PVE) supported
• GVRP protocol for Management VLAN
• Protocol-based VLAN
• MAC-based VLAN
• IP subnet VLAN
• Supports Link Aggregation
• Maximum 128 trunk groups with up to 8 ports per trunk group
• IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
• IEEE 802.1D Classic Spanning Tree Protocol (STP)
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
• BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)

  Quality of Service:

• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
• IEEE 802.1p CoS/ToS- IPv4/IPv6 DSCP
• Port-based WRRStrict priority and WRR CoS policies

  Multicast:

• Supports IPv4 IGMP snooping v1, v2 and v3, and IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)

  Security:

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• Supports URPF to avoid IP address clone
• IPv6 ND snooping

  Management:

• Management IP for IPv4 and IPv6
• Switch Management Interface
• Console/Telnet Command Line Interface
• Web switch management- SNMP v1, v2c and v3 switch management
• SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• DHCP relay and option 82
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
• Supports ping, trace route function for IPv4 and IPv6
• User Privilege levels control
• Link Layer Discovery Protocol (LLDP) and LLDP-MED

  Redundant Power System:

• 100~240V AC, -40V~-60V DC (optional) dual redundant power

• 24-port 100/1000BASE-X mini-GBIC/SFP slots
• 16 10/100/1000BASE-T RJ45 copper ports, shared with port-1 to port-16
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• 2 20Gbps Hardware Stacking ports
• RJ45 to DB9 console interface for switch basic management and setup
• 1 RJ45 Ethernet management port for switch basic management and setup
• 1 USB 2.0 for backup/upload configuration and firmware upgrade

  IP Stacking:

• Connects with stack member via both Gigabit TP/SFP interface and 10G SFP+ slots
• Single IP address management, supporting up to 24 units stacked together

  Hardware Stacking:

• Connects with stack member via QSFP+ slots
• Supporting up to 6 units stacked together

  IP Routing Features:

• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution

  Multicast Routing Features:

• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2

  Layer 2 Features:

• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet and IEEE 802.3ae 10Gb/s Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
• IEEE 802.3x pause frame flow control in full-duplex mode
• Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
• 32K MAC address table, automatic source address learning and aging
• Supports VLAN
• IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management
• Up to 256 VLANs groups, out of 4041 VLAN Ids
• Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
• Private VLAN Edge (PVE) supported
• GVRP protocol for Management VLAN- Protocol-based VLAN
• MAC-based VLAN
• IP subnet VLAN
• Supports Link Aggregation
• Maximum 128 trunk groups with up to 8 ports per trunk group
• IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
• IEEE 802.1D Classic Spanning Tree Protocol (STP)
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
• BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)

  Quality of Service:

• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
• IEEE 802.1p CoS/ToS
• IPv4/IPv6 DSCP
• Port-based WRR
• Strict priority and WRR CoS policies

  Multicast:

• Supports IPv4 IGMP snooping v1, v2 and v3, and IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)

  Security:

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• Supports URPF to avoid IP address clone
• IPv6 ND snooping

  Management:

• Management IP for IPv4 and IPv6
• Switch Management Interface
• Console/Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c and v3 switch management
• SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• DHCP relay and option 82
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
• Supports ping, trace route function for IPv4 and IPv6
• User Privilege levels control
• Link Layer Discovery Protocol (LLDP) and LLDP-MED

  Redundant Power System:

• 100~240V AC, -40V~-60V DC (optional) dual redundant power

• 4 open module slots design:
• 2 Management Modules with 2 Standard Modules
• 1 Management Module with 3 Standard Modules
• 160-port Gigabit copper, 156-port Gigabit SFP, 60-port 10G SFP+ and 6-port 40G QSFP+
• Hot-swappable switching modules
• Non-blocking wire-speed Layer 2 and Layer 3 switching
• 1 RJ45 serial console interface on Management Module for switch basic management and setup

 

• Redundant Power System100~240V AC dual power redundant
• 1 default AC power supply
• 1 additional open slot for optional power supply
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply

  IP Stacking:

• IP stacking technology -- connect with stack member via any Gigabit /10G/40G interface
• Single IP address management, supporting up to stackable 24 units

  IP Routing Features:

• IP Routing protocol supports RIP v1/v2, OSPF v2, BGP4
• Routing interface provides VLAN routing mode
• Policy-based Routing(PBR) for IPv4 and IPv6
• VRRP protocol for redundant routing deployment
• Supports route redistribution

  Multicast Routing Features:

• Supports Multicast Routing Protocols:
• PIM-DM (Protocol Independent Multicast - Dense Mode)
• PIM-SM (Protocol Independent Multicast - Sparse Mode)
• PIM-SSM (Protocol Independent Multicast - Source-Specific Multicast Mode)
• DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3

  Layer 2 Features:

• Supports auto-negotiation, auto-MDI/MDI-x and half-duplex/full-duplex modes for all 1000BASE-T ports.
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Supports VLAN
• IEEE 802.1Q tagged VLAN
• Up to 4K VLANs groups, out of 4041 VLAN Ids
• Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
• GVRP protocol for VLAN Management
• Private VLAN Edge (PVE)
• Supports Spanning Tree Protocol
• STP, IEEE 802.1d (Spanning Tree Protocol)
• RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
• MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
• Supports Link Aggregation
• 802.3ad Link Aggregation Control Protocol (LACP)
• Cisco ether-channel (static trunk)
• Maximum 128 trunk groups, up to 8 ports per trunk group
• Up to 16Gbps bandwidth (Duplex Mode)
• Provides Port Mirror (many-to-1)
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port

  Quality of Service:

• 8 priority queues on all switch ports
• Supports strict priority and Weighted Round Robin (WRR) CoS policies
• Ingress Shaper and Egress Rate Limit per port bandwidth control
• Traffic policies based on application

  Multicast:

• Supports IGMP snooping v1, v2 and v3
• Querier mode support

  Security:

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Static MAC

  Management:

• IPv4/IPv6 Switch Management Interfaces
• Console/Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c, and v3 switch management
• SSH ( Secure Shell)/SSL secure access
• Four RMON groups (history, statistics, alarms and events)
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• DHCP/BOOTP relay and Relay Option 82
• DHCP Server
• DNS-Proxy
• Firmware upload/download via FTP/TFTP
• SNTP (Simple Network Time Protocol)
• LLDP (Link Layer Discovery Protocol )
• User Privilege levels control

  XGS3-42000R Serie:

• XGS3-M16C8S
• 24-port Gigabit (16-port TP/SFP Combo + 8-port 100/1000X SFP)/MGMT Module
• XGS3-S20X2Q
• 20-port 10G SFP+ + 2-port 40G QSFP+ Switch Module/Standard Module
• XGS3-S44S4X
• 44-port 100/1000BASE-X SFP + 4-port 10G SFP+ Switch Module/Standard Module
• XGS3-S16C8S4X
• 24-port Gigabit (16-port TP/SFP combo + 8-port 100/1000X SFP) + 4-port 10G SFP+ Switch Module/Standard Module
• XGS3-S48G
• 48-port 10/100/1000BASE-T Switch Module/Standard Module

• 1x 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function
• 1x 10GBASE-X SFP+ slot interface

  Layer 2 Features:

• IEEE 802.3u/802.3ab/802.3bz/802.3ae Ethernet standard compliant
• Supports auto-negotiation and 100Mbps half/full duplex and 1/2.5/5/10Gbps full duplex mode
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• 16K jumbo frame size support
• Automatic address learning and address aging

  Case and Installation:

• External 5V DC, 2A power supply
• DIN-rail and wall-mount design
• Supports 6000 VDC Ethernet ESD protection
• 100 meters over Cat 6A / Cat7 at 10Gbps
• 0 to 50 degrees C operating temperature
• Co-works with PLANET’s 10”/19” Media Converter Chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Plug and Play installation