• RS-232 to RS-422 conversion with RTS/CTS support
• RS-232 to 2-wire or 4-wire RS-485 conversion
• 2 kV isolation protection (TCC-100I)
• Wall and DIN-Rail mounting
• Plug-in terminal block for easy RS-422/485 wiring
• LED indicators for power, Tx, Rx
• Wide temperature model available (-40 to 85°C)

• Boost serial signal to extend transmission distance
• Wall or DIN-Rail mounting
• Terminal block for easy wiring
• Power input from terminal block
• DIP switch setting for built-in terminator (120 ohm)
• Boost RS-422 or RS-485 signal, or convert RS-422 to RS-485
• 2 kV isolation protection (TCC-120I)

• External power source supported but not required
• Compact size
• Converts RS-422, and both 2-wire and 4-wire RS-485
• RS-485 automatic data direction control
• Automatic baudrate detection
• 15 kV serial ESD protection
• Built-in 120-ohm termination resistors
• 2.5 kV isolation (for TCC-80I only)
• LED port power indicator

• 4 channels of 4 kV RMS isolation for 1 minute
• External power source supported but not required
• 15 kV serial ESD protection
• Automatic baudrate detection ››Compact size

• “Ring” and “Point- to-Point” transmission
• Extends RS-232/422/485 transmission up to:
• 40 km with single-mode—TCF-142-S
• 5 km with multi-mode—TCF-142-M
• Decreases signal interference
• Protects against electrical interference and chemical corrosion
• Supports baudrates up to 921.6 kbps
• Wide temperature models available (-40 to 75°C)

 

• Extends RS-232 transmission up to:
•  40 km with single-mode—TCF-90-S
•  5 km with multi-mode—TCF-90-M
• Reduces signal interference
• Protects against electrical interference or chemical corrosion
• 15 kV ESD protection for serial signals
• Compact size

 

• 10/100BaseT(X), 4-pin M12 (D-coded), F/H duplex mode, and auto MDI/MDI-X connection
• IP67-rated housing protection
• Power input: 12 to 45 VDC, 18 to 30 VAC
• Complies with all EN 50155 mandatory test items 
• -40 to 75°C operating temperature range (-T models)

The TN-5305 Series Ethernet switches are IP67-rated for tough industrial applications. By using M12 connectors, you can rest assured that Ethernet cables will connect tightly to the switch, and will be robust enough to protect your applications from external disturbances, such as the vibration and shock encountered in the transportation industry. The space-saving TN-5305 switches can be mounted virtually anywhere, and wide operating temperature (-40 to 75°C) models are also available for use in the most extreme weather conditions. TN-5305 Series Ethernet switches comply with a portion of EN 50155 specifications, covering operating temperature, power input voltage, surge, ESD, and vibration, making the switches suitable for a variety of industrial applications.

• M12 connectors and IP40 metal housing
• Up to 8 IEEE 802.3af compliant PoE and Ethernet combo ports
• Supports IEEE 802.3/802.3u/802.3x
• Complies with all EN 50155 mandatory test items 
• -40 to 75°C operating temperature range (-T models)

The ToughNet TN-5308 Series M12 unmanaged Ethernet switches are designed for industrial applications in harsh environments. TN-5308 Series switches use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The TN-5308 Series Ethernet switches provide 8 Fast Ethernet M12 ports, support IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network. Models with an extended operating temperature range of -40 to 75°C are also available. TN-5308 Ethernet switches comply with those EN 50155 requirements that make products more suitable for rolling stock applications, including operating temperature, power input voltage, surge, ESD, and vibration, making the switches suitable for a variety of industrial applications. TN-5308 PoE Ethernet switches provide 4 or 8 IEEE 802.3af compliant PoE ports. These switches are classified as power source equipment (PSE) and provide up to 15.4 watts of power per port.

• Compatible with USB 2.0
• 12 Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows, WinCE, and Linux
• Mini DB9 female to terminal block adapter for easy wiring
• LEDs for indicating USB and TxD/RxD activity
• 2 kV electrical isolation (UPort 1130I and 1150I)

   

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• 15N high retention type B connector
• Drivers provided for Windows, WinCE, and Linux
• LEDs for easy monitoring
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• Standard 19-inch rack-mountable
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux
• Locking power cord

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• Standard 19-inch rack-mountable
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux
• Locking power cord

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows and Linux
• Supports Fixed-Base COM Utility for setting the initial extended COM port number
• LEDs for easy monitoring

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows and Linux
• Supports Fixed-Base COM Utility for setting the initial extended COM port number
• LEDs for easy monitoring