SHOP

Hersteller Lightwin

Hersteller, PATCHBOX® - C60MMAOM41133E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, MM OM4, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM411X3E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, MM OM4, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM41233E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, MM OM4, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60MMAOM412X3E
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, MM OM4, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS21133Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, SM, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS211X3Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, SM, LC - LC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS21233Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 2,7m, SM, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - C60SMAOS212X3Y
PATCHBOX®Plus+ Kassette mit HQ Duplex LWL Patchkabel, 1,7m, SM, LC - SC
Preis auf Anfrage
  • PATCHBOX®Plus+ Cassettes with Fiber Patchcord
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cablestopper: hold the cable in needed length
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires.
  • Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - IDLABELW
PATCHBOX® Identifikation Etiketten, 96 Stück
Preis auf Anfrage
  • Insertion labels
  • Usable on both sides
  • Product complies with RoHS and CE
  The labels are simply pushed onto the cable stopper of the cassette. If the PATCHBOX® is mounted above or below a switch, then you already have a logical mapping of the cassettes to the switch ports. With the patch panel port on the label you can see all your connections at a glance.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - P60MMAOM41124E
PATCHBOX®Plus+ mit 24 PATCHBOX® Kassetten/Patchkabel, OM4 LC-LC
Preis auf Anfrage
  • Perfect for all 800 mm deep Cabinets
  • Up to 1.7 m extendable Patchcord, 100% tested
  • Cassettes with clip-in-frame Function
  • Cable stopper keeps the Cable in the extended length
  • Patchcatch the space-saving cable management
  • Direct labeling of the cassettes (eg panel A03)
  • Easy to change and combine the cassettes
  • Tool-less installation
  The PATCHBOX®Plus+ is the state of the art cable management system; fast, neat and installed in all-in-one solution. It replaces conventional cable management and patch cords completely with an all-in-one solution.   The PATCHBOX®Plus+ with its retractable cables, provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can be done remotely further reducing costs.   Included items:
  • 24x Cassettes with Patchcord Multimode 50/125µm OM4 bend insensitive fiber
  • 6x Patchcatch
  • 1x PATCHBOX (R) frame
  • 2x adjustable mounting rails incl. Hexagon nuts
  • 2x DIN A5 tear-off labels (60 labels)
  Fiber Patchcord:
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable: LIGHTWIN® Lifetime Warranty 100% tested, with individual measurement protocol for return loss and insertion loss Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034 All plug combinations and lengths on request at short notice   General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires. Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - P60MMAOM41224E
PATCHBOX®Plus+ mit 24 PATCHBOX® Kassetten/Patchkabel, OM4 LC-SC
Preis auf Anfrage
  • Perfect for all 800 mm deep Cabinets
  • Up to 1.7 m extendable Patchcord, 100% tested
  • Cassettes with clip-in-frame Function
  • Cable stopper keeps the Cable in the extended length
  • Patchcatch the space-saving cable management
  • Direct labeling of the cassettes (eg panel A03)
  • Easy to change and combine the cassettes
  • Tool-less installation
  The PATCHBOX®Plus+ is the state of the art cable management system; fast, neat and installed in all-in-one solution. It replaces conventional cable management and patch cords completely with an all-in-one solution.   The PATCHBOX®Plus+ with its retractable cables, provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can be done remotely further reducing costs.   Included items:
  • 24x Cassettes with Patchcord Multimode 50/125µm OM4 bend insensitive fiber
  • 6x Patchcatch
  • 1x PATCHBOX (R) frame
  • 2x adjustable mounting rails incl. Hexagon nuts
  • 2x DIN A5 tear-off labels (60 labels)
  Fiber Patchcord:
  • Multimode 50/125µm OM4 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable: LIGHTWIN® Lifetime Warranty 100% tested, with individual measurement protocol for return loss and insertion loss Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034 All plug combinations and lengths on request at short notice   General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires. Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - P60SMAOS21124Y
PATCHBOX®Plus+ mit 24 PATCHBOX® Kassetten/Patchkabel, OS2 LC-LC
Preis auf Anfrage
  • Perfect for all 800 mm deep Cabinets
  • Up to 1.7 m extendable Patchcord, 100% tested
  • Cassettes with clip-in-frame Function
  • Cable stopper keeps the Cable in the extended length
  • Patchcatch the space-saving cable management
  • Direct labeling of the cassettes (eg panel A03)
  • Easy to change and combine the cassettes
  • Tool-less installation
  The PATCHBOX®Plus+ is the state of the art cable management system; fast, neat and installed in all-in-one solution. It replaces conventional cable management and patch cords completely with an all-in-one solution.   The PATCHBOX®Plus+ with its retractable cables, provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can be done remotely further reducing costs.   Included items:
  • 24x Cassettes with Patchcord Singlemode 9/125µm OS2 bend insensitive fiber
  • 6x Patchcatch
  • 1x PATCHBOX (R) frame
  • 2x adjustable mounting rails incl. Hexagon nuts
  • 2x DIN A5 tear-off labels (60 labels)
  Fiber Patchcord:
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable: LIGHTWIN® Lifetime Warranty 100% tested, with individual measurement protocol for return loss and insertion loss Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034 All plug combinations and lengths on request at short notice   General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires. Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - P60SMAOS21224Y
PATCHBOX®Plus+ mit 24 PATCHBOX® Kassetten/Patchkabel, OS2 LC-SC
Preis auf Anfrage
  • Perfect for all 800 mm deep Cabinets
  • Up to 1.7 m extendable Patchcord, 100% tested
  • Cassettes with clip-in-frame Function
  • Cable stopper keeps the Cable in the extended length
  • Patchcatch the space-saving cable management
  • Direct labeling of the cassettes (eg panel A03)
  • Easy to change and combine the cassettes
  • Tool-less installation
  The PATCHBOX®Plus+ is the state of the art cable management system; fast, neat and installed in all-in-one solution. It replaces conventional cable management and patch cords completely with an all-in-one solution.   The PATCHBOX®Plus+ with its retractable cables, provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can be done remotely further reducing costs.   Included items:
  • 24x Cassettes with Patchcord Singlemode 9/125µm OS2 bend insensitive fiber
  • 6x Patchcatch
  • 1x PATCHBOX (R) frame
  • 2x adjustable mounting rails incl. Hexagon nuts
  • 2x DIN A5 tear-off labels (60 labels)
  Fiber Patchcord:
  • Singlemode 9/125µm OS2 bend insensitive fiber
  • 2,8mm cable diameter (Figure 8)
  • Special selected ferrule
  • Serial number for every cable
  • LSZH flame retardant coating
  • Measurement protocol for RL & IL
  • Lightwin® Lifetime Warranty
  • Other lengths and customized labeling on request available!
  All LIGHTWIN® fiberoptic patchcords are processed to a high-quality product with certain ferrules and processing methods. These cables are suitable for all fiberoptic applications in a wide range of telecommunications applications. Typical application areas are patches in data centers, server or network cabinets, as well as FTTH (Fiber to the Home). The use of singlemode ferrules for the LIGHTWIN® multimode patch cables and specially selected ferrules with the lowest tolerances for the LIGHTWIN® singlemode patchcables achieves damping values that go far beyond the required standards according to ISO / IEC.   Other advantages of the LIGHTWIN® fiberoptic patchcable:
  • LIGHTWIN® Lifetime Warranty
  • 100% tested, with individual measurement protocol for return loss and insertion loss
  • Use of bend insensitive fibers. Therefore no increase of the damping at a narrow bending radius
  • Aramide yarn reinforced strain relief, halogen- free and flame- retardant coating according to IEC-60754-2, IEC-60332-1 and IEC-61034
  • All plug combinations and lengths on request at short notice
  General information about fiberoptic cables: Identical designations for fiberoptic patchcables may include: jumper cable, adapter cable, connection cable, jumper. Fiber optic cables operate with light, so they do not (or cause) susceptibility to electromagnetic interference, such as comparatively copper wires. Because of the low attenuation of the optical cables, it is also possible to bridge distances of more than 100 km without optical amplification.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - PBCX8K
PATCHBOX®Plus+ Patchkabelringe, Kunststoff, 4-Stück Set
Preis auf Anfrage
  • Mounting without additional cage nuts and screws
  • Space saving
  • Opening on the side
  The Patchcatch™ is a space saving cable management. It is mounted under your existing patch panels, switches or PATCHBOX®Plus+ and does not need any extra cage nuts or rack units. It applies a simple and logical distribution of your patch cords within the cabinet and works with our SLIM Patchcords.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - PBXBLIND
PATCHBOX® Blindpanel für PATCHBOX®Plus+ CASE, Kunststoff, 10-Stück Set
Preis auf Anfrage
  • Blind Panels for not used slots
  • Material: Plastic
  • Color: Black
  • Fixing by means of clip system
 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PATCHBOX® - PBXFRAME
PATCHBOX®Plus+ 19" Chassis für bis zu 24 PATCHBOX® Kassetten, leer, schwarz
Preis auf Anfrage
  • Individual placement of copper and fiber optic patch cables
  • Up to 24 PATCHBOX®Plus+ cassettes
  • Easy insertion and replacement of cartridges
  • Automatic retraction
  • Cable stopper: holds the cable in the desired length
  The PATCHBOX®Plus+ is the state of the art cable management system; fast, neat and installed in all-in-one solution. It replaces conventional cable management and patch cords completely with an all-in-one solution.   The PATCHBOX®Plus+ with its retractable cables, provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can be done remotely further reducing costs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /