• Convert between Modbus TCP and Modbus RTU/ASCII
• 1 Ethernet port and 1 RS-232/422/485 ports
• 16 simultaneous TCP masters with up to 32 simultaneous requests per master
• Easy hardware setup and configuration

   

• Compatible with USB 2.0
• 12 Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows, WinCE, and Linux
• Mini DB9 female to terminal block adapter for easy wiring
• LEDs for indicating USB and TxD/RxD activity
• 2 kV electrical isolation (UPort 1130I and 1150I)

   

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• Standard 19-inch rack-mountable
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• Standard 19-inch rack-mountable
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux

• PCI Express x1 compliant
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip S/W flow control
• Low profile form factor fits small-sized PCs
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux

  Overview: The CP-132EL and CP-132EL-I are 2-port PCI Express boards designed for industrial automation applications that require a long distance, multipoint, PC-based data acquisition solution.   RS-485 multidrop for up to 31 devices within 1.2 km: The CP-132EL/EL-I boards have 2 RS-422/485 serial ports, each of which can achieve data rates up to 921.6 kbps. In RS-485 mode, the boards can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. For long distance RS-485 communication, choose the CP-132EL-I model, which comes with 2 kV electrical isolation protection to prevent equipment damage.   Drivers Provided for Windows, Linux, and Unix Moxa continues to support a wide variety of operating systems, and the CP-132EL/EL-I boards are no exception. Reliable Windows and Linux drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows and Linux
• Supports Fixed-Base COM Utility for setting the initial extended COM port number
• LEDs for easy monitoring

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• 15N high retention type B connector
• Drivers provided for Windows, WinCE, and Linux
• LEDs for easy monitoring
• Locking power jack

• Over 700 kbps data throughput for top performance
• 128-byte FIFO and on-chip H/W, S/W flow control
• Universal PCI compatible with 3.3/5 V PCI and PCI-X
• Serial communication speed up to 921.6 kbps
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Easy maintenance with on-board LED display
• On-board 15 kV ESD and 2 kV electrical isolation
• Wide temperature model available for -40 to 85°C environments

• Over 800 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for super fast data transmission
• ADDC® provides automatic data direction control for RS-485 signals
• Transmit data up to 1.2 km with RS-422/485
• 128-byte FIFO and on-chip S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• MD1 low profile form factor fits small-sized PCs ››Wide temperature model available for -40 to 85°C environments

  Overview: The CP-132UL and CP-132UL-I are 2-port Universal PCI boards designed for industrial automation applications that require a long distance, multipoint, PC-based data acquisition solution.   On-chip Automatic Data Direction Control for precise RS-485 communication: RS-485 communication requires precise timing control to enable and disable the line driver. Moxa’s Turbo Serial Engine™ chip that powers the CP-132UL/UL-I boards comes with on-chip ADDC®, which makes RS-485 as easy to use as RS-232.   RS-485 multidrop for up to 31 devices within 1.2 km: The CP-132UL/UL-I Universal PCI boards have two RS-422/485 serial ports, both of which can achieve data rates up to 921.6 kbps. In RS-485 mode, the boards can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. For long distance RS-485 communication, choose the CP-132UL-I model, which comes with 2 kV electrical isolation protection to prevent equipment damage.   Top Serial Performance: With 20-plus years of experience in serial board design, Moxa is now concentrating on a new high performance serial data transmission chip. The Turbo Serial Engine™ chip provides serial boards with a 128-byte FIFO, on-chip software flow control, and burst data mode. Thanks to the Turbo Serial Engine™, Moxa is able to offer the world’s best performing smart serial boards.   Drivers Provided for Windows, Linux, and Unix: Moxa continues to support a wide variety of operating systems, and the CP-132UL/UL-I boards are no exception. Reliable Windows and Linux/Unix drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Convert between Modbus TCP and Modbus RTU/ASCII
• 1 Ethernet port and 4 RS-232/422/485 ports
• 16 simultaneous TCP masters with up to 32 simultaneous requests per master
• Easy hardware setup and configuration

 

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• Drivers provided for Windows and Linux
• Supports Fixed-Base COM Utility for setting the initial extended COM port number
• LEDs for easy monitoring

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• 2 kV electrical isolation (UPort 1450I only)
• Hassle-free COM port retention
• Drivers provided for Windows/WinCE/Linux
• Choose bus power or external power (UPort 1410/1450 only)
• Locking power jack

• PCI Express x1 compliant
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Low profile form factor fits small-sized PCs
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Easy maintenance with on-board LEDs and management software

  Overview: The CP-104EL-A is a smart, 4-port PCI Express board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even Unix. In addition, each of the board’s 4 RS-232 serial ports supports a super fast 921.6 kbps baudrate. The CP-104EL-A provides full modem control signals to ensure compatibility with a wide range of serial peripherals, and its PCI Express “x1” classification allows it to be installed in any PCI Express slot.   Smaller Form Factor: The CP-104EL-A is a low-profile board that is compatible with any PCI Express slot. The board requires only a 3.3 VDC power supply, which means that the board fits any host computer, ranging from shoebox to standard-sized PCs.   Drivers Provided for Windows, Linux, and Unix: Moxa continues to support a wide variety of operating systems, and the CP-104EL-A board is no exception. Reliable Windows and Linux/Unix drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Over 800 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Wide temperature model available for -40 to 85°C environments

Introduction: The CP-104UL and CP-104JU 4-port universal PCI boards are designed for POS and ATM applications. They are a top choice of industrial automation engineers and system integrators, and support many different operating systems, including Windows, Linux, and even Unix. In addition, each of the boards’ RS-232 serial ports supports a super fast 921.6 kbps baudrate. The CP-104UL and CP-104JU provide full modem control signals to ensure compatibility with a wide range of serial peripherals, and they work with both 3.3 V and 5 V PCI buses, allowing the boards to be installed in virtually any available PC server.

• PCI Express x1 compliant
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Low profile form factor fits small-sized PCs
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux

  Overview The CP-114EL and CP-114EL-I are smart, 4-port PCI Express boards designed for POS and ATM applications. The boards are a top choice of industrial automation engineers and system integrators, and support many different operating systems, including Windows and Linux. In addition, each of the boards’ 4 RS-232/422/485 serial ports supports a super fast 921.6 kbps baudrate. The CP-114EL and CP-114EL-I provide full modem control signals to ensure compatibility with a wide range of serial peripherals, and their PCI Express “x1” classification allows the boards to be installed in any PCI Express slot.   Smaller Form Factor The CP-114EL and CP-114EL-I are low profile boards that are compatible with any PCI Express slot. The boards require only a 3.3 VDC power supply, which means that the boards fit any host computer, ranging from shoebox to standard-sized PCs.   Drivers Provided for Windows, Linux, and Unix Moxa continues to support a wide variety of operating systems, and the CP-114EL/EL-I boards are no exception. Reliable Windows and Linux drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Over 700 kbps data throughput for top performance
• 128-byte FIFO and on-chip H/W, S/W flow control
• Universal PCI compatible with 3.3/5 V PCI and PCI-X
• Serial communication speed up to 921.6 kbps
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Easy maintenance with on-board LED display
• Wide temperature model available for -40 to 85°C environments

  Overview: Moxa’s CP-114UL/UL-I series of multiport serial boards are designed to be used by industrial automation system integrators for long distance, multipoint, PC-based data acquisition applications. On-chip Automatic Data Direction Control for precision RS-485 communication requires precise timing control to enable and disable the line driver. The Moxa Turbo Serial EngineTM chip that powers the CP-114UL/UL-I boards come with on-chip ADDC®, which makes RS-485 as easy to use as RS-232. In RS-485 mode, the serial port can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. For long distance RS-485 communication, 2 kV electrical isolation protections are available to prevent equipment damage.   Drives Provided for Windows, Linux, and Unix: Moxa continues to support a wide variety of operating systems, and the CP-114UL/UL-I boards are no exception. Reliable Windows and Linux/Unix drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• PCI Express 1.0 compliant
• 921.6 kbps maximum baudrate for fast data transmission
• 128-byte FIFO and on-chip S/W flow control
• Variety of connection cables and boxes available for RS-232/422/485
• Drivers provided for a broad selection of operating systems, including Windows, Linux, and UNIX
• Easy maintenance with built-in LEDs and management software

The CP-134EL-A-I is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-134EL-A-I is compatible with all popular operating systems, and each of its eight serial ports supports data rates of up to 921.6 kbps and provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-134EL-A-I works with PCI Express x1, allowing the board to be installed in any PCI Express slot. Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending):
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

• Over 700 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for super fast data transmission
• ADDC® provides automatic data direction control for RS-485 signals
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Added bonus! Ports 1 and 2 support RS-232 and RS-422/485
• Wide temperature model available for -40 to 85°C environments

  Overview: The CP-134U and CP-134U-I 4-port universal PCI boards are designed for industrial automation applications that require a long distance, multipoint, PC-based data acquisition solution.   On-chip Automatic Data Direction Control for precise RS-485 communication: RS-485 communication requires precise timing control to enable and disable the line driver. The Moxa Turbo Serial Engine™ chip that powers the CP-134U board comes with on-chip ADDC®, which makes RS-485 as easy to use as RS-232.   RS-485 multidrop for up to 31 devices within 1.2 km: The CP-134U universal PCI board has 4 RS-422/485 serial ports, each of which can achieve data rates up to 921.6 kbps. In RS-485 mode, the board can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. For long distance RS-485 communication, choose the CP-134U-I, which comes with 2 kV electrical isolation protection to prevent equipment damage.   Drivers Provided for Windows, Linux, and Unix: Moxa continues to support a wide variety of operating systems, and the CP-134U and CP-134U-I boards are no exception. Reliable Windows and Linux/Unix drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux
• Locking power cord

• Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
• 921.6 kbps maximum baudrate for super fast data transmission
• 15N high retention USB type B connector
• 128-byte FIFO and on-chip H/W, S/W flow control
• COM port assignments maintained across different PCs
• Mini DB9 female to terminal block adapter for easy wiring
• Drivers provided for Windows, WinCE, and Linux
• Locking power cord

• Over 700 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including Windows, Linux, and UNIX
• Easy maintenance with built-in LEDs and management software
• Wide-temperature model available for -40 to 85°C environments

The CP-118U and CP-138U are smart, 8-port Universal PCI serial boards designed for POS and ATM applications and for use by industrial automation system manufacturers and system integrators. Both boards are compatible with all major operating systems. In addition, the CP-118U’s 8 RS-232/422/485 ports and the CP-138U’s 8 RS-422/485 ports support data rates up to 921.6 kbps and provide full modem control signals to ensure compatibility with a wide range of serial peripherals. The CP-118U and CP-138U support both 3.3 V and 5 V PCI buses, making them suitable for installation in most PC servers. Drivers Provided for Windows, Linux, and UNIX:
Moxa continues to support a wide variety of operating systems, and the CP-118U and CP-138U serial boards are no exception. Reliable Windows and Linux/UNIX drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.

• Over 700 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Easy maintenance with on-board LED display, and management software
• Wide temperature model available for -40 to 85°C environments

  Overview: The CP-118U and CP-138U are smart, 8-port Universal PCI serial boards designed for POS and ATM applications and for use by industrial automation system manufacturers and system integrators. Both boards are compatible with all major operating systems. In addition, the CP-118U’s 8 RS-232/422/485 ports and the CP-138U’s 8 RS-422/485 ports support data rates up to 921.6 kbps and provide full modem control signals to ensure compatibility with a wide range of serial peripherals. The CP-118U and CP-138U support both 3.3 V and 5 V PCI buses, making them suitable for installation in most PC servers.   Drivers Provided for Windows and Linux: One of Moxa’s highest priorities is to provide drivers for all mainstream operating systems. Reliable, well-tested Windows and Linux/Unix drivers are available for use with the CP-118U and CP-138U serial boards. Other operating systems, such as Windows XP embedded and WEPOS, are also supported to accommodate embedded integration applications.

• PCI Express x1 compliant
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Low profile form factor fits small-sized PCs
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux

  Overview: The CP-102E and low-profile CP-102EL are 2-port PCI Express boards designed for POS and ATM applications. Moxa’s PCI Express boards are a top choice of industrial automation engineers and system integrators, particularly since the boards support many different operating systems, including Windows and Linux. The CP-102E/EL’s 2 RS-232 serial ports support a superfast 921.6 kbps baudrate and provide full modem control signals to ensure compatibility with a wide range of serial peripherals. In addition, the boards’ x1 classification allows them to be installed in any PCI Express slot.   Smaller Form Factor: The CP-102EL is a low-profile board that is compatible with any PCI Express slot. The CP-102EL board only requires a 3.3 VDC power supply, which means that the board fits any host computer, ranging from shoebox to standard-sized PCs.   Drivers Provided for Windows, Linux, and Unix Moxa continues to support a wide variety of operating systems, and the CP-102E/EL boards are no exception. Reliable Windows and Linux drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration applications.

• Excellent data throughput at over 800 kbps
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• MD1 low profile form factor (CP-102UL) fits compact PCs
• Wide temperature model available for -40 to 85°C environments

  Overview The CP-102U and CP-102UL are 2-port universal PCI boards designed for POS and ATM applications. They are designed especially for industrial automation engineers and system integrators to support many different operating systems, including Windows, Linux, and even Unix. In addition, each RS-232 serial port supports up to 921.6 kbps   Designed for Standard and Compact PCs The CP-102UL is a low-profile board requiring a 5 VDC power supply. It is compatible with both a 3.3 V and 5 V PCI bus, allowing the CP-102UL to be tucked inside compact PCs.   Top Serial Performance With 20-plus years of experience in serial board design, Moxa is now concentrating on a new high-performance serial data transmission chip. The Turbo Serial Engine™ chip provides serial boards with a 128-byte FIFO, on-chip hardware and software flow control, and burst data mode. With Turbo Serial Engine™, Moxa is able to offer advanced smart serial boards with unbeatable transmission performance.   Drivers Provided for Windows, Linux, and Unix Moxa continues to support a wide variety of operating systems, and the CP-102U/UL boards are no exception. Reliable Windows and Linux/Unix drivers are provided for all Moxa boards, with support for many operating systems, including WEPOS, for embedded integration.

• Over 700 kbps data throughput for top performance
• 921.6 kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Choose from a wide range of connection cables and boxes
• Compatible with 3.3/5 V PCI and PCI-X
• Drivers provided for a broad selection of operating systems, including the latest Windows and Linux
• Wide temperature model available for -40 to 85°C environments

  Introduction: The CP-168U is a smart, 8-port universal PCI board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even Unix. In addition, each of the board’s 8 RS-232 serial ports supports a superfast 921.6 kbps baudrate. The CP-168U provides full modem control signals to ensure compatibility with a wide range of serial peripherals, and it works with both 3.3 V and 5 V PCI buses, allowing the board to be installed in virtually any available PC server.