SHOP

Aktive Komponenten xPON/VDSL

xPON/VDSL
Hersteller
PLANETPLANETUbiquitiUbiquitiZTEZTE
weitere Filter anzeigen weniger Filter anzeigen
Hersteller
Aktive Komponenten, PLANET - ADE-SPT
VDSL Splitter, 1:2 RJ11
Preis auf Anfrage
  • 1x RJ11 für Telefonleitung
  • 2x RJ11 für LAN
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - ADN-4102A
150Mbps 11N WLAN, ADSL/ADSL2/2+ Router with 4-Port
Preis auf Anfrage
  • Shared Internet Access through a single external IP address
  • Supports NAT (Network Address Translation)
  • Built-in ADSL 2/2+ Modem for all common ADSL connections
  • Various WAN connections - PPPoE, PPPoA, Direct Connection
  • Supports Fixed and Dynamic IP Address
  Built-in Firewall to Have Safe Internet Surfing PLANET ADN-4102 is a Wireless ADSL 2/2+ Router compliant with 802.11n and features 1T1R MIMO antenna technology. The ADN-4102’s built-in parental controls is to limit children’s online time – be it computing or gaming, thus creating a safer computing environment for children. In Annex M mode, the ADN-4102 provides transmission rates up to 24Mbps downstream and 3.5Mbps upstream with ADSL 2+ support. Through integration with single chipset to reduce boot time, the ADN-4102 brings more powerful performance to users. The ADN-4102 also supports PPPoA (RFC 2364 -- PPP over ATM Adaptation Layer 5), RFC 2684 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1483) to establish a connection with ISP.    High-speed 802.11n Wireless Access With built-in IEEE 802.11b/g and 802.11n wireless network capabilities, the ADN-4102 allows any computer and wireless-enabled network device to connect it without additional cabling. Smart phones also jump on the bandwagon of wireless networking. Its 802.11n wireless capability gives you a high-speed wireless transmission up to 150Mbps. With a compatible wireless LAN card installed in your PC, any file can be transferred at a very high speed. The radio coverage is also doubled than before, offering you the high-speed wireless connection, even in a spacious office or house.    One-touch Secure Wireless Connection To secure the wireless communication, the ADN-4102 features the most up-to-date encryptions like WEP, WPA-PSK and WPA2-PSK. The ADN-4102 also supports WPS configuration with PBC/PIN type for users to easily connect to a secured wireless network with no need of complicated settings.    4-in-1 (4 Multiple SSIDs) Wireless Networking Infrastructures Up to four wireless networking with management can be established by the ADN-4102. This flexibility makes it the best choice for SOHO wireless networking in restaurants, hotels, bookstores and more.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - C320 CHASSIS
ZTE GEPON OLT Chassis, ohne Netzteil und Karten, 2 Modulmöglichkeiten
Preis auf Anfrage
The ZXA10 C320 is the industry’s first compact FTTx CO (central office) equipment that is widely used in low-density, enterprise access, outdoor deployment and limited space scenarios.   The ZXA10 C320 is an integrated platform that supports GPON, XG-PON1 and P2P access. A single system supports 32*GPON ports, 16*XG-PON1 ports and 96/48*P2P ports.   The ZXA10 C320 has a low requirement for equipment room resources such as power supply and installation space, saves auxiliary construction investments by using redundant racks and power systems in equipment rooms, and supports being deployed in outdoor cabinets when equipment rooms are unavailable.   Under the same user capacity configuration, the ZXA10 C320 requires an installation space of 2U, saving 85% installation space compared with large-capacity OLTs that require an installation space of 16U. The ZXA10 C320 uses 1:64 splitters, supports the access of 2048 FTTH subscribers, and provides 100Mbps bandwidth for each user at 25% concurrent rate.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPL-2000
2-Port GEPON OLT with 2-Port 1000Base-X SFP Uplink
Preis auf Anfrage
  • 2 x SC-type GEPON OLT port
  • Up to 1.25Gbps data rate in both upstream and downstream directions
  • Maximum distance of up to 20km
  • Each OLT port supports up to 64 ONUs
  • Fully compliant with IEEE 802.3ah
  • Point-to-multipoint network topology
  • LED indicators for link status 
  Perfectly Designed for FTTx Applications PLANET EPL-2000 is a GEPON Optical Line Terminal (OLT) designed especially for Point to Multipoint (PtMP) FTTx applications. The EPL-2000 is equipped with two GEPON ports, two Gigabit SFP uplink Interfaces and one management port in the 1U height case. With friendly centralized GUI management, it is easy for installation and maintenance of GEPON deployment. When functioning with PLANET GEPON Optical Network Units (ONU) EPN series, the EPL-2000 provides highly effective GEPON solutions for broadband network.    High-speed and Long-distance Coverage for Triple Play Services The EPL-2000 is in the PLANET Gigabit Ethernet Passive Optical Network (GEPON) solution family that provides a high bandwidth of up to 1.25Gbps for both upstream and downstream, and a long-distance coverage of up to 20km between equipment nodes for network deployment. It can fulfill the increasing demand for the home multimedia and entertainment areas. The EPL-2000 makes many multimedia services come true on FTTx network such as:  
    • IPTV, Smart TV and HDTV  
    • On-line Game
    • VOD (Video on Demand)  
    • Internet Radio / On-line Music
    • Voice over IP
    • Long-distance Education
    • Video Conferencing / Video Phone   
    The EPL-2000 offers an excellent bandwidth of the reliable and scalable network to satisfy the triple play devices for home entertainment and communication.    High Split Ratio / Cost-effective Network Connection Solution With high split ratio at 1:64 and two PON ports equipped, the EPL-2000 supports the deployment of up to 128 PLANET ONUs which can minimize the investment cost for carriers. GEPON is a point to multipoint communications protocol based on Gigabit Ethernet. It allows a Gigabit Ethernet communications fiber to be shared by multiple end users using a passive optical splitter. Each PON port of the EPL-2000 is available for a maximum of 1:64 WDM to transmit data based on forming fiber web via fiber and 64 GEPON long-distance ONU equipment. Therefore, the EPL-2000 offers the network users the benefits of great capacity, excellent secrecy, web-grouping flexibility and saving the line resources as well as the quantity of end equipment.    Excellent Traffic Control By integrating the advanced technology in the telecommunication industry, the EPL-2000 provides strong functionalities for Ethernet features such as VLAN, Multicast, DBA (Dynamic Bandwidth Allocation), and Access Control List. The EPL-2000 is an ideal solution for FTTx applications.   High Scalability and Flexible OLT Maintenance For efficient management, the EPL-2000 supports remote management functions. Via its user-friendly GUI utility, the administrators can manage and configure the OLT and ONU equipment on the central side. The GUI utility supports up to 32 EPL-2000 OLTs to be centrally managed through one control screen. The built-in Element Management System (EMS) offers an easy-to-use management and configuration facility to add to or remove PLANET OLTs and ONUs from the network architecture easily and economically. Its great flexibility is perfect for deployment among different network architectures. The EPL-2000 also supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software.    Robust ONUs Management The EPL-2000 supports many operating and monitoring functions for efficient ONUs management, such as ONU auto-detection, auto-registration, testing link connection, binding MAC address and filtration, bandwidth control, flow control, and multicast stream control.   Flexible and Extendable Solution The two uplink mini-GBIC slots of the EPL-2000 are compatible with 1000BASE-SX/LX and WDM SFP (Small Form Factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (Multi-mode fiber cable) up to 10/30/50/70/120 kilometers (Single-mode fiber or WDM fiber cable). They are well suited for FTTx applications to distributions data link.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPL-SPT-32
GEPON Splitter (1x32 PLC Splitter, Wavelength 1260 ~ 1650 nm)
Preis auf Anfrage
  • 1 : 32 High Split Ratio
  • Low Insertion Loss
  • Low PDL (Polarization Dependent Loss)
  • High Reliability and Stability
  • Wide Operating Wavelength 1260 to 1650nm
  • Wide Operating Temperature -40°C to 85°C
   
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPL-SPT-64
GEPON Splitter (1x64 PLC Splitter, Wavelength 1260 ~ 1650 nm)
Preis auf Anfrage
  • 1 : 64 High Split Ratio
  • Low Insertion Loss
  • Low PDL (Polarization Dependent Loss)
  • High Reliability and Stability
  • Wide Operating Wavelength 1260 to 1650nm
  • Wide Operating Temperature -40°C to 85°C
 
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPL-SPT-8
GEPON Splitter (1x8 PLC Splitter, Wavelength 1260 ~ 1650 nm)
Preis auf Anfrage
  • 1 : 8 High Split Ratio
  • Low Insertion Loss
  • Low PDL (Polarization Dependent Loss)
  • High Reliability and Stability
  • Wide Operating Wavelength 1260 to 1650nm
  • Wide Operating Temperature -40°C to 85°C
 
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPN-103
GEPON ONU with 1-Port Fast Ethernet + 1-Port Gigabit
Preis auf Anfrage
  • 1 x SC type GEPON Port
  • Up to 1.25Gbps data rate in both upstream and downstream directions
  • Maximum distance of up to 20km
  • Compliant with IEEE 802.3ah
  • LED indicators for link status
  Perfectly Designed for FTTx Applications PLANET EPN-103 is a GEPON Optical Network Unit (ONU) equipped with one GEPON port, one Gigabit and one Fast Ethernet RJ-45 interface. When functioning with PLANET GEPON Optical Network Terminal (OLT) EPL-2000, the EPN-103 provides highly effective GEPON solutions for FTTx network. With friendly centralized GUI management, it is easy for installation and maintenance of GEPON deployment.    Cost-effective Passive Optical Network Connection Solution With increasing network services such as HDTV, IPTV, voice-over-IP (VoIP) and Multimedia broadband applications, the demand of broadband communication has grown quickly. Passive Optical Network (PON) is the most promising NGN (Next Generation Networking) technology to meet the needs. As compared to other broadband access technologies such as xDSL and cable modem, Passive Optical Network (PON) technology offers competitive advantages including a long-term life expectancy of the fiber infrastructure, lower operating costs through the reduction of “active” components, support of up to 20km long distance between equipment nodes, and most importantly, offer of much greater bandwidth.    Robust ONUs Management The EPN-103 is designed to work with PLANET 2-Port OLT EPL-2000 to provide robust FTTx applications. With the Element Management System (EMS) built in the EPL-2000, the administrators can manage and configure the facilities such as adding or removing PLANET OLTs and ONUs to or from the network architecture easily and economically. The EMS also supports many operating and monitoring functions for efficient ONUs management including ONU auto-detection, auto-registration, testing link connection, binding MAC address, loopback test and filtration, bandwidth control, flow control, and multicast stream control.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - EPN-402NV
GEPON WiFi ONU (1-Port PON interface, 4-Port FE, 2-Port FXS, USB, 802.11n)
Preis auf Anfrage
  • Supports 802.3ah CTC external OAM
  • 1 x SC type GEPON port
  • Up to 1.25Gbps upstream and downstream
  • Up to 20km
  • Supports 128-bit triple churning algorithm
  • Supports dying gasp
  Delivering High-Demand Service Connectivity for ISP / Triple Play Devices PLANET EPN-402NV is a GEPON Wi-Fi ONU (Optical Network Unit) equipped with one GEPON port, four 10/100Mbps RJ-45 LAN ports and two FXS RJ-11 interfaces. It is also a high-end line with IEEE 802.11b/g/n standard multi-terminal product. It provides residential and office users with the ideal solution for sharing an ultra high-speed fiber optical broadband connection. When functioning with PLANET GEPON Optical Network Terminal (OLT) EPL-2000, the EPN-402NV provides highly-effective GEPON solutions for FTTH network. With friendly-centralized GUI management, it is easy for installation and maintenance of GEPON deployment.    Perfectly Designed for Fiber to the Home Applications PLANET EPN-402NV is a fiber to the home (FTTH) broadband access equipment type. With built-in 1.25Gbps GEPON fiber interface, the EPN-402NV supports different optic types for WAN and the distance can be up to 20km through the fiber connection. It can handle multiple high-throughput services such as IPTV, on-line gaming, VoIP and Internet access, and keep the bandwidth usage smoothly via its QoS features. Thus, with the advantages of high reliability and scalability, the EPN-402NV can further be applied in the network of SOHO (small office or home office) or small businesses that provide high-performance access services.    High-Speed 802.11n Wireless With built-in IEEE 802.11b/g and 802.11n wireless network capabilities, the EPN-402NV allows any computer and wireless-enabled network device to connect to it without additional cabling. 802.11n wireless capability brings users the speed of wireless data transmission rate to as high as 300Mbps. The radio coverage is also doubled to offer strong wireless connection even in widely spacious offices or houses.    Standard Compliance with FXS Port The EPN-402NV provides two FXS ports that can easily integrate with general voice over IP system. The EPN-402NV makes it simple for the enterprise featuring voice and data system or expanding voice system to new locations. It helps you to save money on long-distance calls; for example, the remote users can dial in through a Unified VoIP Communication System just like an extension call but no long-distance call charge would occur.   IPv6/IPv4 Dual Stack Capability With fully supporting both IPv4 and IPv6 protocols, the EPN-402NV can work with the original IPv4 network structure and also support the new IPv6 network structure now and in the future. As more network devices are growing and the need for larger addressing and higher security becomes critical, the EPN-402NV is the best choice for ISPs to build the IPv6 FTTx edge service to connect with the IPv6 network.   Superior Management Functions The EPN-402NV provides user-friendly management interface to be managed easily through standard web browsers. For networking management features, the EPN-402NV not only provides basic router functions such as DHCP server, virtual server, DMZ, QoS, and UPnP, but also firewall functions including Network Address Translation (NAT), URL/Port/MAC filtering and DoS protection. Furthermore, the EPN-402NV serves as an Internet firewall to protect your network from being accessed by unauthorized users.   Robust ONU Management The EPN-402NV is designed to work with PLANET OLT EPL-2000 to provide robust FTTx applications. With the Element Management System (EMS) built in the EPL-2000, the administrators can manage and configure the facilities such as adding or removing PLANET OLTs and ONUs to or from the network architecture easily and economically. The EMS also supports many operating and monitoring functions for efficient ONU management including ONU auto-detection, auto-registration, testing link connection, binding MAC address, loopback test and filtration, bandwidth control, flow control, and multicast stream control.    TR-069 Remote Management To reduce the service provider’s manpower needed for on-site maintenance, the EPN-402NV supports TR-069 (WAN Management Protocol) standard that allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device remotely.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - GTGH/B+
16 ports GPON OLT line card (mit 16x B+ Transceiver/Receiver Modulen)
Preis auf Anfrage
  • High density
    • 16 GPON ports per card, up to 1: 128 split ratio
  • GPON  function
    • Support ONU power saving management defined in G.987.3
  • 1024 T-CONTs per PON port, 4096 GEM ports per PON port
  • High TM performance
    • Support H-QOS
    • 1024 queues and 256 schedulers per PON port
    • Support color-sensitive RED and WRED discard algorithm
  • Clock/time function
  • Receive 1PPS+TOD signals  and send  them to the ONU through a PON channel
  • Low power consumption
    • Newly-developed lower power  GPON MAC chip
Reduce 30% power consumption on industry average
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - GTGO(G)/B+
8 ports GPON OLT line card (mit 8x B+ Transceive/Receive Modulen)
Preis auf Anfrage
  • High density
    • 8 GPON ports per card, up to 1: 128 split ratio
  • GPON  function
    • Support ONU power saving management defined in G.987.3
  • 1024 T-CONTs per PON port, 4096 GEM ports per PON port
  • High TM performance
    • Support H-QOS
    • 1024 queues and 256 schedulers per PON port
    • Support color-sensitive RED and WRED discard algorithm
  • Clock/time function
  • Receive 1PPS+TOD signals  and send  them to the ONU through a PON channel
  • Low power consumption
    • Newly-developed lower power  GPON MAC chip
Reduce 30% power consumption on industry average
Verfügbarkeit:
mehr Informationen
zu Favoriten
Aktive Komponenten, ZTE - HUVQ
2 ports 10GE & 2 ports GE optical interface card-HUVQ für C300 OLT
Preis auf Anfrage
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - IDL-2402
24-Port ADSL/ADSL2/2+ IP DSLAM with 1000Base-T Gigabit Uplink, Annex A
Preis auf Anfrage
  • 24-Port ADSL/ADSL2/ADSL2+ subscriber interface with built-in POTS splitter
  • DMT data rate: Downstream up to 25 Mbps / Upstream up to 3 Mbps
  • 1000Base-T uplink interface
  • Web GUI based management
  • Local RS-232 CLI and Ethernet SNMP / Telnet / SSH management
  • Firmware upgradable via FTP
  • Configuration backup and restoration via TFTP
  • Supports IPSec / L2TP / PPTP VPN pass-through
  • Supports 4K MAC address
  • Supports IEEE 802.1q Tag-based VLAN and Protocol-based VLAN
  • Layer 2 / 3 filtering based on MAC, IP, Protocol, Port number and Ether Type
  • Access Control List by MAC / IP / Protocol / Port number
  • Traffic prioritization (802.1p)
  • Supports IGMP snooping / proxy per IGMP v1, v2, and v3
  • Fan alarm indication
  • Temperature monitoring and system overheating trap functionality
  PLANET IDL-2402 is a 24-Port ADSL2/ADSL2+ mini IP DSLAM with one 1000Base-T uplink Interface offering scalable and easy deployment for the network with small ADSL environment. With the built-in POTS splitter subscriber ports, the IDL-2402 has developed a cost-effective solution for network service providers to offer multiple subscribers excellent services.   Moreover, the IDL-2402 supports local and remote managed capabilities of CLI, SNMP, Telnet via RS-232 Console Port and Web GUI management interface. Via the user-friendly Web GUI, the IDL-2402 can be managed by workstations running standard web browsers that provide the easy-to-use operation and convenient maintenance.   To enhance the network security, PLANET IDL-2402 also provides features such as QoS, VLAN, Multicast, Bandwidth Management, Traffic Prioritization, and Access Control List. With the advanced QoS features, the IDL-2402 is an ideal solution for next generation broadband network to deliver rich video contents, DSL, POTS, and VoIP service over ADSL2+ connection.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - IDL-4802
48-Port ADSL/ADSL2/2+ IP DSLAM with 1000Base-T Gigabit UpLink, Annex A
Preis auf Anfrage
  • 48-Port ADSL / ADSL2 / ADSL2+ Subscriber Interface with Built-in POTS Splitter
  • DMT data rate: Downstream up to 25 Mbps / Upstream up to 3Mbps
  • 2 x 1000Base-T or 2 x mini-GbE Uplink Interfaces
  • Web-based GUI Management
  • Local RS-232 CLI and Ethernet SNMP / Telnet / SSH Management
  • Firmware Upgradeable via FTP
  • Configuration Backup and Restoration via TFTP
  • Supports IPSec / L2TP / PPTP VPN Pass-through
  • Supports 4K MAC address
  • Supports IEEE 802.1q Tag-based VLAN and Protocol-based VLAN
  • Layer 2 / 3 Filtering Based on MAC, IP, Protocol, Port Number and Ether Type
  • Access Control List by MAC / IP / Protocol / Port number
  • Traffic prioritization (802.1p)
  • Supports IGMP Snooping / Proxy per IGMP v1, v2, and v3
  • Fan Alarm Indication
  • Temperature Monitoring and System Overheating Trap Functionality
  • Supports IEEE 802.1d Spanning Tree Protocol and IEEE 802.3ad Link Aggregation
  PLANET IDL-4802 is a 48-Port ADSL/ADSL2/ADSL2+ mini IP DSLAM which equips with combo electrical (RJ-45) and fiber optical (SFP) uplink interfaces offering scalable and easy deployment for the network with small ADSL environment. With the built-in POTS splitter subscriber ports, the IDL-4802 has developed a cost-effective solution for network service providers to offer multiple subscribers excellent services.   Moreover, the IDL-4802 supports local and remote managed capabilities of CLI, SNMP, and Telnet via RS-232 console port and Web GUI management interface. Via user-friendly Web GUI, the IDL-4802 can be managed by workstations running standard web browsers that provide the easy-to-use operation and convenient maintenance.   To enhance the network security, PLANET IDL-4802 also provides features such as QoS, VLAN, Multicast, Bandwidth Management, Traffic Prioritization, and Access Control List. With the advanced QoS features, the IDL-4802 is an ideal solution for next generation broadband network to deliver rich video contents, DSL, POTS, and VoIP service over ADSL2+ connection.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - PRAM
ZTE Stromversorgungseinschub für C320 Chassis, Wechselstromanschluss
Preis auf Anfrage
  • One AC power input interface
  • One DC power output interface
  • One battery interface
  • One temperature sensor interface 
Verfügbarkeit:
mehr Informationen
zu Favoriten
Aktive Komponenten, ZTE - PRWH
H-type 4.5U Power Interface Card
Preis auf Anfrage
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - SCTM
System Kontroll-/Switching Karte für C300 OLT
Preis auf Anfrage
  • Switching Capacity: 2,56T
  • Largest switching capacity
    • 4*10GE uplink ports
    • Supports 16-port GPON card and 8-port XG-PON1 card simultaneously
  • Clock/time features
    • Supports IEEE1588 v2  & Sync-E
  • IP/MPLS  features
    • IPv4/IPv6 dual-stack
    • DHCP relay, IPv6 source guard, IPv6 ND forwarding control,Ipv6 multicast
    • Support MPLS wire forwarding
  • Multiple services
    • Supports MEF based OpenAccess solution
    • Supports 3G/LTE/5G/Wi-Fi Mobile backhaul and fronthaul solution
Supports L2 VPN solution
Verfügbarkeit:
mehr Informationen
zu Favoriten
Aktive Komponenten, ZTE - SCXN
System Kontroll-/Switching Karte für C300 OLT
Preis auf Anfrage
  • Switching Matrix Capacity: 480G
  • High switching capacity
    • 4*GE uplink ports
    • Supports 16/8 port GPON card
    • Support 8 port XG-PON1 card
  • Clock/time function
    • Level-3 clock synchronization
    • IEEE1588 v2 and time synchronization
  • IP  function
IPv4/IPv6 dual-stack
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - SMXA/1
Haupt Kontrollkarte für ZTE GEPON C320 OLT, 1x GE Uplink
Preis auf Anfrage
  • Function:
  • Controls the system and switches services.
  • Provides power supply to the system.
  •  
  • Interface:
  • One out-of-band Network Management (NM) interface
  • One debugging serial port
  • One GE optical interface
  • One GE electrical interface
  • One environment monitoring interface
  • One -48 V DC power interface 
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, ZTE - SMXA/3
Haupt Kontrollkarte für ZTE GEPON C320 OLT
Preis auf Anfrage
  • unterstützt 10 GE Uplinks
  Function: Controls the system and switches services. Provides power supply to the system.   Interface: One out-of-band Network Management (NM) interface One debugging serial port One 10GE optical interface (can be configured as one GE optical interface) One GE optical interface One GE electrical interface One environment monitoring interface One -48 V DC power interface
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - UF-NANO
U®Fiber GPON Optical Network Unit
Preis auf Anfrage
  • High-Performance GPON CPE
  • Bis zu 2.4 Gbps Downstream
  • Bis zu 1.2 Gbps Upstream
  • Bis zu 20 km GPON Links
  • GPON WAN Port
  • Stromversorgung: 24V Passiv PoE
  • Montage: Wandmontage (Indoor)
  Der UFiber Nano G ist ein robustes, Hochleistungs-GPON CPE, das über eine integrierte Informations-LED-Anzeige verfügt. Außerdem kommt der Nano G in einem modernen und kompakten Gehäuse. Die leicht ablesbare LED-Anzeige liefert Statusinformationen: IP-Adresse, Signalstärke und Stromaufnahme. Des Weiteren ist der Nano G mit folgenden Features ausgestattet:  
  • WAN: (1) GPON Port
  • LAN: (1) Gigabit Ethernet Port
  • Datendurchsatz: 2.488 Gbps/1.244 Gbps
  • Digitale LED Status Anzeige
  • Max. Stromaufnahme: 7W
  • Stromversorgung: 24V Passive PoE
  • Wandmontage möglich
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - UF-OLT
U®Fiber GPON Optical Line Terminal
Preis auf Anfrage
  • 8x GPON SFP Ports, 2x SFP + Ports
  • Gleichzeitige Clients: 1024 ONUs
  • GPON Reichweite: Bis zu 20 km Link
  • GPON Geschwindigkeit: 2.488 Gbps Upstream (TX), 1.244 Gbps Downstream (RX)
  • Wellenlängen: 1490nm Upstream (TX), 1310nm Downstream (RX)
  • Max. Leistungsaufnahme: 40W
  • Stromversorgung:
    • AC / DC Power Module
    • DC / DC Power Module (optional)
  • 1HE Rack-montierbar (optional)
  • GPON End-to-End-Lösung
  • Hochleistungs-, Provider OLT
  • Low-Cost, robuste ONU CPE
  Die UFiber OLT bietet acht GPON-Ports und unterstützt bis zu 1024 gleichzeitige Clients mit physischen Verbindungen von bis zu 20 km Entfernung. Zwei SFP+ Ports bieten 10G Uplink-Konnektivität.   Der UF-OLT bietet flexible Stromversorgungsoptionen mit zwei modularen Netzadaptern, die entweder AC/DC- oder DC/DC-Leistungsmodule aufnehmen können. Ein AC / DC-Modul ist enthalten; zusätzliche Module können separat erworben werden.   Das Konfigurieren eines Faser-Netzwerks wurde so einfach wie das Einrichten eines Smartphones. Verabschieden Sie sich von Kommandozeilen, Handbüchern und bezahlten Supportlizenzen. Der UFiber OLT - eine Faserlösung, die jeder einsetzen kann.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-201A©
100Mbps Ethernet to VDSL2 Converter - 17a
Preis auf Anfrage
Verfügbarkeit:
Variationen: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-202A
100Mbps Ethernet to Coaxial (BNC) Converter - 17a
Preis auf Anfrage
• Defines Asymmetric (Plan 998) and Symmetric for the transmission of upstream and downstream signals • Cost-effective Profile 17a CO / CPE bridge solution • One box design, CO / CPE selectable via DIP Switch • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards • DMT (Discrete Multi-Tone) line coding • Half duplex back-pressure and IEEE 802.3x full duplex pause frame flow control • Supports up to 1,536 bytes packet size, IEEE 802.1Q VLAN tag transparent • Standalone transceiver for simple bridge modem application • Advantage of minimum installation time (simply by Plug-and-Play) • Selectable target band plan and target SNR margin • Supports extensive LED indicators for network diagnostics • Co-work with PLANET MC family Media Chassis (MC-700 / 1500 / 1500R / 1500R48) • Compact in size, easy installation   Ethernet Distance Extension via Coaxial PLANET VC-202A is a high-performance Ethernet-over-Coaxial extender that converts between twisted pair (UTP) and coaxial cable for every kind of IP Ethernet application. It offers the absolutely fastest data transmission speed over existing coaxial cable without the need of rewiring. On the UTP side, the VC-202A uses a modular EIA / TIA 568 RJ-45 connector that supports CAT-5/5e or above wiring with the distance up to 100 meters (328 feet). On the coaxial cable side, the VC-202A utilizes a BNC connector that supports 50ohm or 75ohm coaxial cable with the distance up to 3km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable for any type of IP network device such as IP camera, wireless access point, NVR and digital signage.    Cost-effective / Quick Upgrade Legacy Devices to All IP Networks PLANET VC-202A Ethernet extender provides a quick replacement and smooth migration solution from existing analog system to full digital system. For example:
    • Upgrade analog camera to digital IP Camera
    • IP Digital Signage deployment
    • Cable TV to IPTV
  The VC-202A is equipped with one RJ-45 and one BNC port to transmit the Ethernet data over the most widespread coaxial cable. Therefore, it is very suitable and costless for upgrading legacy devices to new digital devices of IP-based network because almost every house or block on the street could use the existing coaxial cable to transmit data to the Internet and the whole building could share the Internet line in the wide network area at a minimum cost. Reusing the existing cable instead of new wire can save extra wiring cost as the coaxial cable and Ethernet line are already available.   Easy Installation There are two selectable models of the VC-202A, one is used for client side (CPE) and the other is for central side (CO). The VC-202A converter is a plug and play device without the need of configuring by software and is also compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of individual port and the whole system.   Providing Superior Upstream and Downstream Transmission The VC-202A defines asymmetric (Plan 998) and symmetric mode for the transmission of upstream and downstream signals. The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range for central side (CO). In all, when the VC-202A is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance.  
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-203PR
IEEE802.3 at POE+ over Coaxial Receiver
Preis auf Anfrage
  • 1 x 10/100Base-TX RJ-45 copper interface (802.3at/af PoE Out)
  • 1 x BNC connector (Power and data receiver)
  • 1 x 2 Pin Terminal Block for 12/24V DC output
Power over Ethernet
  • Supports Power over Ethernet PD, PoE Injector and PoE Splitter
  • Eliminates power cabling with PoE over Coaxial
  • Ethernet over coaxial up to 1km with 5C2V/RG6 75Ωcable
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 port
  • Supports PoE Power up to 30.8 watts (Vary on Power Source and Coaxial Distance)
  • Auto detects remote powered device (PD)
  • Supports adjustable two different output voltage options (12V / 24V) to fit various non-PoE devices
Layer 2 Features
  • Supports auto-negotiation and 10/100Mbps half / full duplex
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
VDSL2 Features
  • One box design, Master / Slave selectable via DIP Switch
  • Defines Asymmetric (Band Plan 998) and Symmetric band plans for the transmission of Upstream and Downstream signals
Industrial Case / Installation
  • Supports extensive LED indicators for network diagnostics
  • IP30 metal case protection
  • Compact size, DIN rail and wall mount design
  • Power Input: External DC or PoC (Power over Coaxial) power input
  • Supports EFT 2000V DC protection for power line
  • Supports ESD 2000V DC Ethernet protection
  • -40 to 75 degrees C operating temperature
    PLANET VC-203Px PoE over Coaxial Extender series is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE wireless AP and any 802.3af/at complied powered device (PD).   The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter anywhere on your network infrastructure. The solution contains two brand-new products:
    • VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
    • VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
   It is a perfect solution for sending IP Video links and power to remote PoE IP camera installation that is beyond the 100 meters distance limit of Ethernet.    Power over Coaxial Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.   IEEE 802.3at/af PoE Injector and Splitter in one box design The VC-203PR is a Single-Port, 802.3at High Power over Ethernet Injector providing maximum up to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously through the cable to PoE PD (Powered Device). In addition, the VC-203PR also features PoE splitter function with selectable 12V/24V DC power output which makes non-PoE equipment power up as well.    Stable Operating Performance under Difficult Environments The VC-203PT and VC-203PR extender is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-231
100/100 Mbps Ethernet to VDSL2 Converter - 30a profile
Preis auf Anfrage
• Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
  • only compatible with VC-201A/204/231 and 234
• One box design, CO / CPE selectable via DIP Switch • Defines symmetric band plan for the transmission of upstream and downstream signals • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet  standards • DMT (Discrete Multi-Tone) line coding • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control • One RJ-11 connector for VDSL port with VDSL connection, additional Splitter for POST connection • Voice and data communication can be shared simultaneously based on the existing telephone wire • One 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent • VDSL2 stand-alone transceiver for simple bridge modem application • Advantage of minimum installation time (Simply as Plug-and-Play) • Selectable target profile and target SNR margin • Supports extensive LED indicators for network diagnosis • Co-work with PLANET MC family Media Chassis (MC-700 / MC-1500/ MC-1500R / MC-1500R48) • Compact in size, easy installation   100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections.   Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network.   Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.   Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection.   Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-231G
10/100/1000 Mbps Ethernet to VDSL2 Bridge - 30a profile w/ G.vectoring
Preis auf Anfrage
  • ITU-T G.993.5 G.vectoring and G.INP
  • DMT-based coding technology
  • Built-in POST splitter to share voice and date
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
  • 1 10/100/1000BASE-TX LAN ports
  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
  • Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
  • One RJ11 connector for VDSL port with VDSL connection
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • Supports a packet size of up to 9K bytes, IEEE 802.1Q VLAN tag transparency
  • VDSL2 standalone transceiver for simple bridge modem application
  • Advantage of minimum installation time (Simply by Plug-and-Play)
  • Supports extensive LED indicators for network diagnosis
  • Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
  • Compact in size and easy to install
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-234
100/100 Mbps Ethernet (4-Port LAN) to VDSL2 Bridge
Preis auf Anfrage
• Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution • One box design, CO / CPE selectable via DIP Switch • Defines symmetric band plan for the transmission of upstream and downstream signals • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet  standards • DMT (Discrete Multi-Tone) line coding • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control • Built-in POTS splitter to share voice and data • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection • Voice and data communication can be shared simultaneously based on the existing telephone wire • Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent • Hardware IGMP Snooping for Multimedia service • VDSL2 stand-alone transceiver for simple bridge modem application • Advantage of minimum installation time (Simply as Plug-and-Play) • Selectable target profile and target SNR margin • Supports extensive LED indicators for network diagnosis   100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-234 is an Ethernet-over-VDSL2 Bridge with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-234 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 20/4Mbps for 1.4km long range connections.     Implementing with Existing Telephone Copper Wires The VC-234 is also a Long Reach Ethernet (LRE) Bridge providing four RJ-45 Ethernet ports and two RJ-11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234 has built-in POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-234 into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234 is ideal to be used as an Ethernet extender to an existing Ethernet network.   Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-234 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-234 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.   Easy & Flexible Installation The Ethernet-over-VDSL2 Bridge comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-234 and a CO mode VC-234 must be setup as one pair of converters to perform the connection.   Providing Superior Upstream and Downstream Transmission Performance The VC-234 also defines symmetric band plan for the transmission of upstream and downstream signals; the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-234 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-234 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VC-820M
8-Port VDSL2 + 2G TP/SFP Managed Switch
Preis auf Anfrage
  • 8 x RJ11 connectors for VDSL2 connection
  • 8 x RJ11 connectors for POTS connection
  •  Built-in POTS splitter for each VDSL port
  • Auto-speed function for VDSL2 link (by distance and cable quality)
  Ethernet Interface:
  • 2 Gigabit TP and SFP shared combo interfaces
  • Auto-MDI/MDI-X detection on Gigabit RJ45 port
  VDSL2 Features:
  • Cost-effective VDSL2 link and central management solution
  • ITU-T G.993.2 VDSL2 standard
  • DMT (Discrete Multi-Tone) line coding VDSL
  • Up to 100/100Mbps symmetric data rate
  • Copper wiring distance up to 1km
  • Selectable target data rate and target SNR margin
  • Built-in surge protection against surge damage from high energy spike
  • Voice and data communication can be shared on the existing telephone wire simultaneously
  • Supports downstream/upstream rate control on each port
  Layer 2 Features:
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Broadcast/multicast/unicast storm control
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN
    • Port-based VLAN
    • Q-in-Q tunneling (VLAN stacking)
    • GVRP for dynamic VLAN management
    • Private VLAN edge (PVE/protected port)
  • Link Aggregation
    • IEEE 802.3ad LACP (Link Aggregation Control Protocol)
    • Cisco ether-channel (static trunk)
  • Spanning Tree Protocol
    • STP, IEEE 802.1D
    • MSTP, IEEE 802.1s
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  Quality of Service:
  • 4 priority queues on all switch ports
  • Traffic classification:
    • IEEE 802.1p CoS- IP ToS/DSCP
    • Port-based priority
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  Multicast:
  • Supports IGMP snooping v1 and v2
  • IGMP querier mode support
  Security:
  • IEEE 802.1X port-based network access control protocol
  • RADIUS users access authentication
  • L2/L3/L4 Access Control List (ACL)
  • MAC filtering and source IP-MAC/port-binding
  • Port security for source MAC address entries filtering
  Management:
  • Switch Management Interface
    • Telnet command line interface
    • Web switch management
    • SNMP v1, v2c, v3 switch management
    • SSL switch management
  • DHCP client for IP address assignment
  • Link Layer Discovery Protocol (LLDP) for easy network management
  • DHCP option82 and DHCP relay
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Firmware upgrade via TFTP or HTTP
  • Configuration upload/download via TFTP or HTTP
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
  • SNMP trap for interface Link Up and Link Down notification
  • Reset button for system management
  • RJ45 console interface for switch basic management and setup
Verfügbarkeit:
mehr Informationen
zu Favoriten
Hersteller, PLANET - VDR-300NU
802.11N Dual-band Wireless VDSL2 Router (4xLAN, 2xUSB, 1xVDSL2/RJ11), 30a
Preis auf Anfrage
Internet Access Features
  • Shared Internet Access: All users on the LAN can access the Internet through the VDR-300NU using only one single external IP address. The local (invalid) IP addresses are hidden from external sources. This process is called NAT (Network Address Translation).
  • Built-in VDSL2 Modem: The VDR-300NU provides VDSL2 modem and supports all common VDSL2 connections.
  • G. Vectoring: G.993.5 (G.Vector) support for significant reduction of crosstalk levels and improvement of VDSL2 line performance
  • Multiple WAN Connections: Upon the Internet (WAN port) connection, the VDR-300NU supports ADSL2+, VDSL2, and 3G with USB port.
  • 3G WAN Backup: 3G USB dongle for backup network connectivity.
  Advanced Internet Functions
  • Virtual Servers: This feature allows Internet users to access Internet servers on your LAN. The setup is also quick and easy.
  • Firewall: The VDR-300NU supports simple firewall with NAT technology.
  • Universal Plug and Play (UPnP): UPnP allows automatic discovery and configuration of the Broadband Router. UPnP is supported by Windows ME, XP, or later.
  • DMZ Support: The VDR-300NU can translate public IP addresses into private IP address to allow unlimited 2-way communication with the servers or individual users on the Internet. It provides the most flexible way to run programs smoothly for programs that might be restricted in NAT environment.
  • RIPv1/v2 Routing: It supports RIPv1/v2 routing protocol for routing capability.
  • IGMP Snooping: IGMP can be used for one-to-many networking applications such as online streaming video and gaming, and allows more efficient use of resources when supporting these types of applications.
  • IPsec: IPsec has been developed to implement VPN.
  LAN Features
  • 4-Port Switch: The VDR-300NU incorporates a 4-Port 10/100Base-TX switching hub, making it easy to create or extend your LAN.
  • DHCP Server Support: Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices upon request. The VDR-300NU can act as a DHCP Server for devices on your local LAN.
  Wireless Features
  • Supports IEEE 802.11a/b/g/n Dual Band Wireless Standards: The VDR-300NU supports the selectable 2.4GHz and 5GHz wireless
  connection. 802.11n standard provides backward compatibility with the 802.11b and 802.11g standard, so 802.11b, 802.11g, and      802.11n can be used simultaneously. IEEE 802.11n wireless technology is capable of up to 300Mbps data rate.
  • WPS Push Button Control: The VDR-300NU supports WPS (Wi-Fi Protected Setup) for users to easily connect to wireless network  
   without configuring the security.
  • Advanced Security: supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK(TKIP/AES encryption), and 802.1x.
  • Wireless MAC Access Control: The Wireless Access Control feature can check the MAC address (hardware address) of wireless
  stations to ensure that only trusted wireless stations can access your LAN.
  • Dual-SSID: It allows users to access different networks through a single AP.
  Management Features
  • TR-069 compliant: Support for centralized management node of multiple VDSL2 CPE.
  • DLNA Media Server: DLNA support to share multimedia content such as video, music and photo in a home network
      PLANET VDR-300NU 802.11n Wireless VDSL2 Router is a multi-function home gateway designed to establish a high-speed VDSL2 broadband network for triple play applications. It is backward compatible with ADSL2+ fixed line over existing phone wire. The VDR-300NU is developed with five core networking technologies in one unit: VDSL2 (Very High Speed Digital Subscriber Line 2), ADSL2+, 3G, IEEE 802.11a/b/g/n dual band wireless connectivity and IPv6/IPv4 dual stack. It provides residential and office users with the ideal solution for sharing an ultra high-speed VDSL2 broadband connection.      High Performance Ethernet over VDSL2 Via the latest VDSL2 technology with 30a profile supported, the VDR-300NU offers very high performance access to Internet, up to 100Mbps for both downstream and upstream data transmission. VDSL2 absolutely offers the fastest data transmission speed over the existing copper telephone lines without the need for rewiring. With integrated support for the ITU-T’s new G.993.5 Vectoring technology, the VDR-300NU works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure.    Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VDR-300NU provides excellent bandwidth to meet the demand of the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VDR-300NU enables many multi-media services to work on local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.   ADSL2+ Fallback For those ISPs that still provide ADSL broadband service, the VDR-300NU can support transmission rates up to 24Mbps downstream and 3.5Mbps upstream with ADSL2+ technology. The VDR-300NU supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 2684 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IP over ATM (IPoA, RFC 1483) to establish a connection with ISP and it can be also directly switched over to VDSL2 after the ISP network upgrade.   3G WAN Backup Connections With interface for 3G USB dongle, the VDR-300NU provides users with a reliable and cost-effective “Always online” solution by featuring 3G / xDSL WAN backup Internet access. The 3G USB capability of the VDR-300NU features activating Internet connection anytime and the redundant WAN interface to ensure the most reliable connection.   Dual Band High-Speed 802.11n Wireless Connectivity The VDR-300NU applies 2T2R MIMO antenna technology and provides two modes for network applications -- Router and Bridge. With built-in 2.4GHz IEEE 802.11b/g/n or 5GHz 802.11a/n wireless network capability, the VDR-300NU allows any computer and wireless-enabled network device to connect to it without additional cabling. 802.11n wireless capability brings users the data transmission rate as high as 300Mbps. The radio coverage is also doubled to offer high speed wireless connection even in spacious offices or houses.   IPv6/IPv4 Dual Stack Capability With fully supporting both IPv4 and IPv6 protocols, the VDR-300NU can work with original IPv4 network structure and also support the new IPv6 network structure now and in the future. As more network devices are growing and the need for larger addressing and higher security becomes critical, the VDR-300NU is the best choice for ISPs to build the IPv6 FTTx edge service and for SMBs to connect with the IPv6 network.   Robust TR-069 Remote Management To reduce the service provider’s manpower needed for on-site maintenance, the VDR-300NU supports TR-069(WAN Management Protocol) standard that allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device remotely.   Secure Wireless Access Control To secure wireless communication, the VDR-300NU supports most up-to-date encryptions including WEP, WPA-PSK and WPA2-PSK. Moreover, the VDR-300NU supports WPS configuration with PBC/PIN type for users to easily connect to a secured wireless network.    Superior Management Functions The VDR-300NU provides user-friendly management interface to be managed easily through standard web browsers. For networking management features, the VDR-300NU not only provides basic router functions such as DHCP server, virtual server, DMZ, QoS, and UPnP, but also provides full firewall functions including Network Address Translation (NAT), IP/Port/MAC Filtering and Content Filtering. Furthermore, the VDR-300NU serves as an Internet firewall to protect your network from being accessed by unauthorized users.
Verfügbarkeit:
mehr Informationen
zu Favoriten