SHOP

Aktive Komponenten Switche

(27 Treffer)
Managed
Hersteller
Extreme NetworksExtreme NetworksPLANETPLANETReyeeReyeeTP-LinkTP-LinkUbiquitiUbiquiti
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
Netzwerk Ports
10-Port10-Port12-Port12-Port16-Port16-Port18-Port18-Port2-Port2-Port20-Port20-Port24-Port24-Port26-Port26-Port28-Port28-Port4-Port4-Port48-Port48-Port555-Port5-Port52-Port52-Port666-Port6-Port888-Port8-Port9-Port9-Port
10 Gigabit Ports
--16162224244488
1GBit Ports
--111010121216161818222020242428283232444 (Combo)4 (Combo)4848556677888 (Combo)8 (Combo)99
1GBit Ports, PoE
1112121616222424323244484888
100MBit Ports
11161624244488
100MBit Ports, PoE
161624244488
SFP+ Ports
--111010121216162224242x fix, 2x optional2x fix, 2x optional444 (Combo)4 (Combo)4 (Lizenz erforderlich)4 (Lizenz erforderlich)48486688
SFP 100/1000Mbps Ports
--111616222 (Combo)2 (Combo)2424444 (Combo)4 (Combo)484888
SFP Ports
--1110101616222 (Combo)2 (Combo)20202424444 (Combo)4 (Combo)48485588
PoE
--IEEE 802.3 afIEEE 802.3 afIEEE 802.3 af/atIEEE 802.3 af/atIEEE 802.3 af/at, Passiv-PoEIEEE 802.3 af/at, Passiv-PoEIEEE 802.3 af/at/btIEEE 802.3 af/at/btIEEE 802.3 af/btIEEE 802.3 af/btIEEE 802.3 atIEEE 802.3 atIEEE 802.3 at/btIEEE 802.3 at/btIEEE 802.3 btIEEE 802.3 btPassiv-PoEPassiv-PoE
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, Ubiquiti - ES-48-500W
EdgeSwitch, 48-Port, 500W
Preis auf Anfrage
  • Layer-2 Switch mit erweiterten Features
  • Layer-3 Routing (Static & Policy-Based)
  • 48 Ports Gigabit PoE (Active / Passive)
  • 2 SFP Ports (je 1 Gbit/s) und 2 SFP+ Ports (je 10 Gbit/s)
  • 500 Watt PoE Leistung
  • Rackmontagefähig
  Ubiquiti EdgeSwitch: Manged PoE+ (active/passive) Gigabit Swich mit SFP-Modulen Der Ubiquiti EdgeSwitch ist ein PoE+ Gigabit Switch, der sowohl über vielfältige Layer-2 Features und Protokollen verfügt, als auch Layer-3 Routing unterstützt. Der Switch ermöglicht die simultane Verarbeitung von Traffic mit 26 Gbps (24 Port Modell) und 70Gbps (48 Port Modell) auf allen Ports ohne Paketverlust. Der Switch verfügt über eine automatische Erkennung von IEEE 802.3af/at Geräten, um automatisch PoE zu aktivieren. Bei der Verwendung von passiven POE-Geräten, muss PoE über das Interface aktiviert werden, damit die Geräte mit Strom versorgt werden.   Glasfaserverbindungen Der 24 Port EdgeSwitch hat 2x SFP-Ports und ermöglicht Übertragungsraten von bis zu 1 Gbps. Der 48 Port EdgeSwitch hat 2x SFP und 2x SFP+ Ports und ermöglicht Übertragungsraten von bis zu 10 Gbps.   Umfangreiches User Interface Das User Interface ist Intuitive gestaltet und ermöglicht die Administration und Konfiguration durch ein Graphisches Interface. Für Erfahrende User ist die Konfiguration auch per Command-Line Interface (CLI) per telnet oder SSH möglich.   Vollgepackt mit Funktionen Die Edgeswitch Serie hat eine vielzahl an Features und unterstützt unteranderem folgende Protokolle und Funktionen:
  • MSTP/RSTP/STP
  • VLAN, Private VLAN, Voice VLAN
  • DHCP Snooping, IGMP Snooping
  • TACACS+, RADIUS, 802.1x, MAC Filtering, ACL
  • DiffServ, CoS
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-48-750W
EdgeSwitch, 48-Port, 750W
Preis auf Anfrage
  • Layer-2 Switch Features & Protokolle
  • Layer-3 Routing Unterstützung
  • 48 Ports Gigabit PoE
  • 2 SFP Ports und 2 SFP+ Ports
  • 750W PoE Leistung
  • Rack Montierbar
  Was ist Ubiquiti EdgeSwitch? Der Ubiquiti EdgeSwitch ist ein PoE+ Gigabit Switch, der sowohl über vielfältige Layer-2 Features und Protokollen verfügt, als auch Layer-3 Routing unterstützt. Der Switch ermöglicht die simultane Verarbeitung von Traffic mit 26 Gbps (24 Port Modell) und 70Gbps (48 Port Modell) auf allen Ports ohne Paketverlust. Der Switch verfügt über eine automatische Erkennung von EEE 802.3af/at Geräten, um automatisch PoE zu aktivieren.   Leistungsstarke Hardware Der 48 Port EdgeSwitch hat 2 SFP Ports und 2  SFP+ Ports welche Glasfaserverbindungen mit bis zu 1 Gbps und 10 Gbps Unterstützen.   Vollgepackt mit Funktionen Die Edgeswitch Serie hat eine vielzahl an Features und unterstützt unteranderem folgende Protokolle und Funktionen:
  • MSTP/RSTP/STP
  • VLAN, Private VLAN, Voice VLAN
  • DHCP Snooping, IGMP Snooping
  • TACACS+, RADIUS, 802.1x, MAC Filtering, ACL
  • DiffServ, CoS
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - ES-48-LITE
EdgeSwitch, 48-port, Lite, Non-POE
Preis auf Anfrage
  • Layer-2 Switch Features & Protokolle
  • Layer-3 Routing Unterstützung
  • 48 Gigabit Ports
  • 2 Gigabit SFP Ports
  • 2 SFP+ Ports
  • Rack Montierbar
  • Mit redundantem Netzteil erweiterbar
  Was ist Ubiquiti EdgeSwitch? Der Ubiquiti EdgeSwitch ist ein Gigabit Switch, der sowohl über vielfältige Layer-2 Features und Protokollen verfügt, als auch Layer-3 Routing unterstützt. Der Switch ermöglicht die simultane Verarbeitung von Traffic mit 26 Gbps (24 Port Modell) und 70Gbps (48 Port Modell) auf allen Ports ohne Paketverlust.   Leistungsstarke Hardware Der 48 Port EdgeSwitch hat 2 SFP Ports und 2  SFP+ Ports, welche Glasfaserverbindungen mit bis zu 1 Gbps und 10 Gbps unterstützen.   Vollgepackt mit Funktionen Die Edgeswitch Serie hat eine vielzahl an Features und unterstützt unteranderem folgende Protokolle und Funktionen:
  • MSTP/RSTP/STP
  • VLAN, Private VLAN, Voice VLAN
  • DHCP Snooping, IGMP Snooping
  • TACACS+, RADIUS, MAC Filtering, ACL
  • DiffServ, CoS
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching 210
ExtremeSwitching 210 Serie, managed Gigabit-Switches für Unternehmen & KMUs
Preis auf Anfrage
  • 12, 24 oder 48 Gigabit-Ethernet-Port Modelle
  • 12, 24 oder 48 IEEE 802.3at PoE-Port Modelle
  • 2 oder 4 1000 Base-X SFP Anschlüsse
  • Line Rate Performance an allen Ports
  • Umfassender Layer 2 Edge-Funktionsumfang
  • Statisches Layer3-Routing mit 60 Routen für die Netzwerksegmentierung
  • Zugriffssteuerungslisten für eine detaillierte Sicherheitskontrolle
  • Begrenzte lebenslange Garantie Flexible Verwaltungsoptionen
  • Cloud-basiertes Management von ExtremeCloud
  • Zentralisierte Unternehmensverwaltung über ExtremeManagement
  • Webbrowser-basierte Verwaltung
  • Industriestandard-Befehlszeilenschnittstelle (CLI) mit Skriptfunktionen
  Flexible Verwaltungsoptionen:
  • ExtremeCloud basiertes Management
  • Zentralisierte Netzwerkverwaltung über ExtremeManagement
  • Webbrowser-basierte Verwaltung
  • Industriestandard-Befehlszeilenschnittstelle (CLI) mit Scripting-Funktionen
  Garantie:
  • Garantiedauer: Produktlebensdauer
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 6
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching 220
ExtremeSwitching 220 Serie, stackbare managed Layer3 Gigabit-Switches für KMUs
Preis auf Anfrage
  • 12, 24 oder 48 Gigabit-Ethernet-Ports
  • 12, 24 oder 48 IEEE 802.3at PoE-Port Modelle
  • 2 oder 4x 10GBase-X SFP+ Anschlüsse
  • Non Blocking Switch
  • Layer 2 Edge Switch
  • Layer 3 statisches und RIP-Routing mit 64 Routen zur Netzwerksegmentierung
  • Zugriffskontrolllisten für die granulare Sicherheitskontrolle
  • Optionale redundante Stromversorgung
  • Begrenzte lebenslange Garantie
  Flexible Verwaltungsoptionen:
  • ExtremeCloud basiertes Management
  • Zentralisierte Netzwerkverwaltung über ExtremeManagement
  • Webbrowser-basierte Verwaltung
  • Industriestandard-Befehlszeilenschnittstelle (CLI) mit Scripting-Funktionen
  Garantie:
  • Garantiedauer: Produktlebensdauer
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 7
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching X440-G2
ExtremeSwitching X440-G2, skalierbarer Edge Switch mit ExtremeXOS
Preis auf Anfrage
  • 12, 24 und 48 Port Gigabit Modelle
  • 4 x 1GbE verfügbare Uplink-Ports, die per Softwarelizenz auf 10GbE aktualisiert werden können. (außer bei Modellen mit erweiterter Temperatur)
  • SFP, Kupfer PoE-Plus, Non-PoE und 100Base-FX Modelle
  • Erweiterter Temperaturbereich von 0°c bis 60°c
  • Zwei SummitStack-V StackPorts (außer für die erweiterte Temperaturbereich Modelle) ermöglichen es, bis zu 8 Switches übereinander zu stacken.
  • Alle Modelle Non-blocking full duplex
  • 10GbE LRM-SupPort bei 48-Port-Modellen
  Features:
  • Luftstrom von links nach rechts und von rechts nach links
  • Optionale redundante Stromversorgung
  • Volle PoE+ 30W Leistung bei 48-Port Modellen
  • Optional Gleichstromversorgung
  • Energieeffizientes Ethernet
  • 10MB/100MB Halbduplex-Unterstützung
  • Rollenbasierte Policy Funktionen ermöglichen einen individuellen Zugriff auf bestimmte Anwendungen oder Dienstleistungen
  • Extremecloud™ Cloud-basiertes Management
  • Extreme Management Center Unterstützung
  Garantie:
  • Garantiedauer: Produktlebensdauer
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 7
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching X450-G2
ExtremeSwitching X445-G2, skalierbarer Aggregations Switch mit ExtremeXOS
Preis auf Anfrage
  • 24-Port- oder 48-Port-Gigabit-Ethernet-Modelle
  • Alle Modelle Non-blocking full duplex
  • PoE-Plus oder nicht PoE Modelle
  • Eingebaute 21 Gbps Stacking-Ports an der Rückseite für alle Modelle (SummitStack-V84)
  • Optionaler SummitStack-V 40 Gbps Stack über zwei 10Gb Frontplatten mit 40 Gbps Ports
  Features:
  • Sicherer Netzwerkzugriff durch rollenbasierte Richtlinie oder Identity Management
  • Luftstrom Front to Back Airflow
  • Modulare PoE-Netzteile
  • 850W PoE-Plus Budget mit einem Netzteil
  • 1440W PoE-Plus Budget mit 2 Netzteilen
  • Y.1731OAM Messung in Hardware für Genauigkeit
  • Energieeffizientes Ethernet - IEEE 802.3az
  • Im laufenden Betrieb austauschbare Lüfter und Netzteile
  Garantie:
  • Garantiedauer: Produktlebensdauer
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 8
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching X460-G2
ExtremeSwitching X460-G2, stackbare managed Layer3 Gigabit-Switche
Preis auf Anfrage
  • 28 oder 48 Port GbE-Modelle
  • 4 Port SFP+ 10GbE oder 4 Port SFP 1GbE auf der Frontplatte
  • 16-Port-Multi-Rate (100Mb/1G/ 2,5G) PoE+ Switch mit 32 10/100/1000 PoE+ Ports
  • Alle Konfigurationen Non-blocking full duplex
  • Zwei neue 48-Port-Switches mit 10GbE-Uplinks, die 24-Port-Switche unterstützen Halb/Vollduplexbetrieb
  • Kupfer-, Glasfaser- und PoE+ Modelle
  • Optionale 10 GbE Glasfaser- und Kupferoptionen mit zwei Ports, um zusätzliche Möglichkeiten zu bieten. 10Gbps Streams der Uplink-Bandbreite
  • Optional 2 Port mit 40GbE zur Bereitstellung von 80 Gbps Uplinks oder Summit Stack-V160 Stackable
  • 40 Gbps Stackable über 10Gb Ethernet-Ports an der Vorderseite oder optionale Summit-Stack
  Bauform:
  • 1HE mit 1 Erweiterungssteckplatz für zusätzliche Schnittstellen und 1 Erweiterungssteckplatz für Timing-Optionen
  Features:
  • Sicherer Netzwerkzugriff durch rollenbasierte Richtlinien oder Identitätsmanagement
  • Front to Back und Back to Front Luftstrom
  • Synchronisation von G.8232 und IEEE 1588 PTP Timing
  • 850W PoE-Plus Budget mit einem Netzteil
  • 1440W PoE-Plus Budget mit 2 Netzteilen
  • Multispeed-Ethernet (100Mb/ 1/ 2,5Gb) Unterstützung
  • Y.1731OAM Messungen in Hardware für Genauigkeit
  • Energieeffizientes Ethernet. IEEE 802.3az auf 10/100/1000 Ports
  • Hot-Swap-fähige Netzteile und Lüftereinschübe
  Garantie:
  • Garantiedauer: Produktlebensdauer
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Extreme Networks - ExtremeSwitching X690
ExtremeSwitching X690, 48-Port 10Gb Aggregation und Spine-Leaf Switch
Preis auf Anfrage
Familie von 10Gb/100Gb Switches mit einem Erweiterte Unternehmensfunktionen:
  • Voll ausgestattetes ExtremeXOS®-Betriebssystem mit erweiterten Funktionen, unterstützt Switching, Routing, SDN und VXLAN
  • Steuerung des Aggregationsswitches für V400-Edge-Geräte.
  • Hochdichte 10Gb Aggregations- und Spine-Leaf Awendungen
  • Non-blocking 1,76 Tbps Vermittlungskapazität pro System
  Benutzerfreundlichkeit - Flexible Verwaltungsoptionen:
  • Anwendungsunterstützung für das Enterprise Extreme Management Center
  • Erweiterte Befehlszeilenschnittstelle
  • Zero Touch Provisionierung (ZTP+)
  • Integrierte webbasierte Verwaltungsanwendung
  Flexible Systemkonfigurationen:
  • Breites Spektrum an Portgeschwindigkeiten von 1Gb, 10Gb, 25Gb, 40Gb, 50Gb und 100Gb
  • LWL SFP+ und Kupfer 10GBASE-T Modelle
  • Hot-Swap-fähige modulare Stromversorgung und Lüfter
  • Optionen für Wechselstrom- und Gleichstromversorgung
  • Optionen für die Luftführung Front to Back oder Back to Front
  • Redundanzoption für Hochverfügbarkeit
  Garantie:
  • Garantiedauer: 1 Jahr
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-2240-48T4X
48-port 10/100/1000T + 4-port 10G SFP+ Web Smart Manageable
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to RS232 DB9 console interface for basic management and setup
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • VLAN
  • Spanning Tree Protocol
  • Link Aggregation
  • Provit port mirror (many-to-1)
  • Supports Ingress/Egress Rate Limit per port bandwidth control
  • IGMP snooping v1,v2,v3
  • DCHP snooping filter
  • Storm control
  • IPv4 management
  • Switch management interface
  • Link Layer Discovery Protocol (LLDP)
  • Ping diagnostics
  • Trace-route
  • SNMP trap for interface linkup and linkdown notification
  • Log management
          High-Density, Resilient Deployment Switch Solution for Gigabit Networking of Enterprise, Campus and Data Center For the growing Gigabit network and IoT (Internet of Things) demand, PLANET has launched a new-generation Web Smart 1/10 Gigabit Switch solution, the GS-2240 switch series, to meet the needs of enterprises, telecoms and campuses for a large-scale network deployment. The GS-2240-48T4X is a Layer 2 Web Smart Switch, which comes with 48 10/100/1000Mbps Gigabit Ethernet ports and 4 10G SFP+ uplink slots. The GS-2240 switch series also provides a quick, safe and cost-effective 1/10G network solution for small and medium-sized businesses.    Cost-effective 10Gbps Uplink Capacity PLANET has made a big leap in the evolution of Ethernet with its launch of the GS-2240-48T4X whose four 10G SFP+ slots support dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose a suitable SFP/SFP+ transceiver according to the transmission distance or speed required to extend the network efficiently. They greatly support an SMB network to achieve 10Gbps high performance in a cost-effective way because 10GbE interface usually could be available in Layer 3 Switch, which could be too expensive to SMBs.    Robust Layer 2 Features The GS-2240 switch series can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), SNMP, bandwidth control, LLDP, DHCP snooping, IGMP snooping and L2 MAC security control. The GS-2240 switch series provides IEEE 802.1Q tagged VLAN and private VLAN. With the supporting port aggregation, they allow the operation of a high-speed trunk by combining multiple ports and support fail-over as well.   Efficient Traffic Control The GS-2240 switch series is loaded with powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast, multicast and unknown unicast storm control, and per port bandwidth control. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.    Friendly and Secure Management For efficient management, the GS-2240 switch series is equipped with web, console, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-2240 switch series offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-48P4S
48-Port 802.3at POE+ Gbit + 4Port SFP Managed Switch 440W
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at/af PoE injector
  • 4x 100/1000BASE-X mini-GBIC/SFP slots
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
- Total PoE power budget control - Per port PoE function enable/disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP
  • Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
- Broadcast/Unknown unicast/Unknown multicast
  • Traffic classification
- IEEE 802.1p CoS - TOS/DSCP/IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports IPv4 IGMP snooping v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • Authentication
- IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS/TACACS+ login user access authentication
  • Access control list
- IPv4/IPv6 IP-based ACL - MAC-based ACL
  • MAC security
- Static MAC - MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter untrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL
  • IPv4 and IPv6 dual stack management
  • Switch management interface
- Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance
- Firmware upload/download via HTTP/TFTP - Configuration upload/download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface link up and link down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET smart discovery utility
  • Smart fan with speed control 
  Cost-effective, High-density PoE Solution Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-48P4S is a cost-optimized, high-density PoE+ Managed Gigabit Ethernet Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 48 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 4 additional Gigabit SFP slots. With a total power budget of up to 440 watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Premium VoIP Networks for Medium- to Large-scale Deployments The GS-4210-48P4S has 48 IEEE 802.3at PoE+ ports, 104Gbps switch fabric and advanced QoS functionality for deploying medium- to large-scale VoIP or wireless networks at a low total cost. One GS-4210-48P4S can power up 48 PoE VoIP phones and delivers HD (high-definition) voice to VoIP network with high priority, resulting in higher quality voice and clearer communication. From now on, customers only need fewer units of the GS-4210-48P4S than before to achieve the goal of cost-effectiveness, thereby saving setup time and human resource.   Built-in Unique PoE Functions for Powered Device Management As it is the managed PoE switch for VoIP, wireless and surveillance networks, the GS-4210-48P4S features the following special PoE management functions:
    • PoE schedule
    • PD alive check
    • Scheduled power recycling
    • PoE usage monitoring
  PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-48P4S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    Intelligent Powered Device Alive-Check The GS-4210-48P4S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-48P4S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-48P4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-48P4S features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-48P4S is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-48P4S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.   Robust Layer 2 Features The GS-4210-48P4S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-48P4S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-48P4S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-48P4S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-48P4S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-48P4S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-48P4S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-48P4S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The four mini-GBIC slots built in the GS-4210-48P4S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-48P4S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-4210-48T4S
48-Port 10/100/1000T + 4-Port SFP Managed Gigabit Switch
Preis auf Anfrage
  • 48-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 4x 100/1000BASE-X mini-GBIC/SFP slots
  • Reset button for system factory default
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports VLAN
  • Supports Spanning Tree Protocol
  • Supports Link Aggregation
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops 
  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
  • Traffic classification
  • Authentication
  • Access Control List
  • MAC Security
  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
  Cost-optimized High-density Managed Gigabit Switch for Small and Medium Businesses PLANET GS-4210-48T4S Gigabit Managed Switch is perfectly designed for SMB and enterprise network infrastructures. Besides the IPv6 / IPv4 management and abundant L2 / L4 switching functions, the GS-4210-48T4S comes with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. It benefits the SMB and enterprise users as it provides Gigabit network performance but it comes at the cost of a Fast Ethernet switch. The GS-4210-48T4S is quite suitable for the next-generation network deployment and offers the lowest total cost of ownership. It is the best investment for business expansion or upgrading its network infrastructure.    High Performance The GS-4210-48T4S provides 48 10/100/1000BASE-T Gigabit Ethernet RJ45 ports and 4 additional 100/1000BASE-X SFP slots. It boasts a high-performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 104Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.    Fanless Design Adopting the latest chip process and green technology, the GS-4210-48T4S successfully reduces substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-48T4S is able to operate stably and quietly in any environment without affecting its performance.    IPv6 / IPv4 Dual Stack By supporting both IPv6 and IPv4 protocols, the GS-4210-48T4S helps the SMBs to step in the IPv6 era with the lowest investment as network facilities do not need to be fully replaced. Thus, the IPv4 network can be easily upgraded by ISPs to the IPv6 FTTx edge network.    Robust Layer 2 Features The GS-4210-48T4S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, and IGMP Snooping. Via the aggregation of supporting ports, the GS-4210-48T4S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe and supports fail-over as well.    Efficient Traffic Control The GS-4210-48T4S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance of VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.    Enhanced and Secure Management For efficient management, the GS-4210-48T4S is equipped with Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-48T4S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet port. Moreover, the GS-4210-48T4S offers secure remote management by supporting SSH and SSL connections which encrypt the packet content at each session.    Powerful Security PLANET GS-4210-48T4S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Port Security allows to limit the number of users on a given port. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.    Flexible Extension Solution The four mini-GBIC slots built in the GS-4210-48T4S are compatible with 1000BASE-SX/LX and WDM SFP (small form-factor pluggable) fiber-optic modules. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). The GS-4210-48T4S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. It is well suited for applications in the enterprise data centers and distributions.    Green Networking In line with the energy-saving trend worldwide, the GS-4210-48T4S adopts the new-generation green technology which brings both benefits of energy saving and Gigabit performance. The new engine provides up to 60% less energy consumption without reducing the performance, and particularly it offers flexible power-saving mode to meet various demands.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-5220-48P4X(R)
L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3af/at PoE+ injector
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup
  Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/IEEE 802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
    • Total PoE power budget control- Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • Temperature threshold control
    • PD alive check
    • PoE schedule

Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unknown unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4094 VLAN Ids
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol
    • IEEE 802.1w Rapid Spanning Tree Protocol
    • IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 26 trunk groups with 4 ports for each trunk group
    • Up to 80Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  Layer 3 Features:
  • IP interfaces (Max. 8 VLAN interfaces)
  • Routing table (Max. 32 routing entries)
  • Routing Protocols (IPv4/IPv6 static routing)
  Quality of Service:
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • TOS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing on the switch port
  • DSCP remarking
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • Multicast VLAN Registration (MVR) support
  Security:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP Snooping to filter untrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1, v2c, and v3 switch management
    • SSH/SSL secure access
  • IPv6 IP Address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual images
  • DHCP Relay
  • DHCP Option 82
  • User Privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network Diagnostic
    • ICMPv6/ICMPv4 remote ping
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • SMTP/Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface Link Up and Link Down notification
  • System Log
  • PLANET Smart Discovery Utility for deployment management
  • Smart fan with speed control
  Redundant Power System (GS-5220-48P4XR):
  • Redundant 100~240V AC/36-60V DC dual power
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-5220-48PL4X(R)
L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch, 600 Watt
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3af/at PoE+ injector
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup
  Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/IEEE 802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
    • Total PoE power budget control- Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • Temperature threshold control
    • PD alive check
    • PoE schedule
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unknown unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4094 VLAN Ids
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol
    • IEEE 802.1w Rapid Spanning Tree Protocol
    • IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 26 trunk groups with 4 ports for each trunk group
    • Up to 80Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  Layer 3 Features:
  • IP interfaces (Max. 8 VLAN interfaces)
  • Routing table (Max. 32 routing entries)
  • Routing Protocols (IPv4/IPv6 software static routing)
  Quality of Service:
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • TOS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing on the switch port
  • DSCP remarking
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • Multicast VLAN Registration (MVR) support
  Security:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP Snooping to filter untrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1, v2c, and v3 switch management
    • SSH/SSL secure access
  • IPv6 IP Address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual images
  • DHCP Relay
  • DHCP Option 82
  • User Privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network Diagnostic
    • ICMPv6/ICMPv4 remote ping
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • SMTP/Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface Link Up and Link Down notification
  • System Log
  • PLANET Smart Discovery Utility for deployment management
  • Smart fan with speed control
  Redundant Power System (GS-5220-48PL4XR):
  • Redundant 100~240V AC/36-60V DC dual power
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - GS-6320-46S2C4XR
L3 46-Port 1Gbit SFP + 2-Port Gbit TP/SFP + 4-Port 10Gbit SFP+ Managed Switch
Preis auf Anfrage
  • 48x 100/1000BASE-X mini-GBIC/SFP slots
  • 2x 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-2
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RS-232 RJ45 console interface for switch basic management and setup 
Layer 3 IP Routing Features:
  • IP dynamic routing protocol supports OSPFv2
  • Routing interface provides per VLAN routing mode
  • Supports maximum 128 static routes and route summarization
  • Supports hardware-based wire-speed VLAN routing 
Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unknown unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4095 VLAN IDs
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Port Isolation
    • MAC-based VLAN
    • IP Subnet-based VLAN
    • Protocol-based VLAN
    • VLAN Translation
    • Voice VLAN
    • GVRP (GARP VLAN Registration Protocol)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D Spanning Tree Protocol
    • RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    • MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 26 trunk groups, up to 16 ports per trunk group
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops 
  • Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
  • Supports G.8032 ERPS (Ethernet Ring Protection Switching) 
Quality of Service:
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • TOS/DSCP/IP Precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic policies on the switch port
  • DSCP remarking 
Multicast:
  • Supports IPv4 IGMP Snooping v1, v2 and v3
  • Supports IPv6 MLD Snooping v1 and v2
  • Querier mode support
  • IPv4 IGMP Snooping port filtering
  • IPv6 MLD Snooping port filtering
  • Multicast VLAN Registration (MVR) support
Security:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • IEEE 802.1x authentication with guest VLAN
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • RADIUS/TACACS+ users access authentication
    • Guest VLAN assigns clients to a restricted VLAN with limited services
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP Snooping to filter un-trusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder 

Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Web switch management 
    • Console/Telnet Command Line Interface 
    • SNMP v1 and v2c switch management
    • SSHv2, TLSv1.2 and SNMP v3 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events) 
    • SNMP trap for interface Link Up and Link Down notification
  • IPv6 IP Address/NTP/DNS management
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP
    • Reset button for system reboot or reset to factory default
    • Dual Images
  • DHCP Relay
  • DHCP Option82
  • DHCP Server
  • User Privilege levels control
  • NTP (Network Time Protocol)
  • UPnP
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • IEEE 802.3ah OAM
  • Network Diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
    • ICMPv6/ICMPv4 Remote Ping
    • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  • SMTP/Syslog remote alarm
  • System Log
  • PLANET NMS System and Smart Discovery Utility for deployment management
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Reyee - RG-NBS3200-48GT4XS
48-Port Gigabit Layer 2 Cloud Managed Switch, 4x SFP+
Preis auf Anfrage
  • Unternehmen, Gastgewerbe, Fabriken, Bildungswesen, Einzelhandel usw.
  • 48-Port Gigabit Layer 2 managed non-PoE Switch, 4 SFP+ Uplink
  • Qualität der Unternehmensklasse garantiert hohe Leistung
  • IP-Kamera-Erkennung, einzigartiger Wert für CCTV-Netzwerke
  • Mehrere Sicherheitsrichtlinien schützen Ihr Netzwerk
  • Lifetime-Management über Ruijie Cloud jederzeit und überall

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Reyee - RG-NBS3200-48GT4XS-P
48-Port Gigabit Layer 2 Cloud Managed PoE Switch, PoE+, 4x SFP+, 370W
Preis auf Anfrage
  • Unternehmen, Gastgewerbe, Fabriken, Bildungswesen, Einzelhandel usw.
  • 48-Port Gigabit Layer 2 managed PoE Switch, 4 SFP+ Uplink
  • Qualität der Unternehmensklasse garantiert hohe Leistung
  • IP-Kamera-Erkennung, einzigartiger Wert für CCTV-Netzwerke
  • Mehrere Sicherheitsrichtlinien schützen Ihr Netzwerk
  • Lifetime-Management über Ruijie Cloud jederzeit und überall

Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Reyee - RG-NBS5200-48GT4XS
48-Port Gigabit Layer 3 Switch, 48x Gbit, 4x SFP+
Preis auf Anfrage
  • Unternehmen, Gastgewerbe, Fabriken, Bildungswesen, Einzelhandel usw.
  • 48-Port Gigabit Layer 3 managed non-PoE Switch, 4 SFP+ Uplink
  • Qualität der Unternehmensklasse garantiert hohe Leistung
  • 6KV-Überspannungsschutz reduziert die
  • Möglichkeit von Portbeschädigungen
  • Mehrere Sicherheitsrichtlinien schützen Ihr Netzwerk
  • Lifetime-Management über Ruijie Cloud jederzeit und überall

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Reyee - RG-NBS5200-48GT4XS-UP
48-Port Gigabit Layer 3 PoE Switch, 48x Gbit, 4x SFP+, 740W
Preis auf Anfrage
  • Unternehmen, Gastgewerbe, Fabriken, Bildungswesen, Einzelhandel usw.
  • 48-Port Gigabit Layer 3 managed PoE Switch, 4 SFP+ Uplink
  • Qualität der Unternehmensklasse garantiert hohe Leistung
  • 6KV-Überspannungsschutz reduziert die
  • Möglichkeit von Portbeschädigungen
  • Mehrere Sicherheitsrichtlinien schützen Ihr Netzwerk
  • Lifetime-Management über Ruijie Cloud jederzeit und überall

Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, TP-Link - SG6654XHP
Omada 48-Port Gigabit Stackable L3 Managed PoE+ Switch mit 6x 10G Slots
Preis auf Anfrage
  • 48× Gigabit RJ45 PoE+ Anschlüsse
  • 6× 10 Gbps SFP+-Slots
  • Bis zu 1440 W PoE-Gesamtbudget*
  • Physikalisches Stacking für integrierte Redundanz und Leistung
  • L3-Funktionen: RIP, OSPF, ECMP, VRRP, PIM-DM, DHCP Server/Relay
  • Sicherheits-Strategien: ACL, Port-Sicherheit, DoS-Verteidigung, 802.1X
  • Hochverfügbar mit zwei vor Ort austauschbaren Netzteilen,** VRRP und ERPS
  • Zentralisierte Cloud-Verwaltung über den Omada SDN-Controller
  • Eigenständige Verwaltung über Web, CLI, SNMP und RMON

Was dieses Produkt leistet:
Der Omada SG6654XHP, ein fortschrittlicher L3-Managed-PoE+-Switch, wurde für die Anforderungen der Konvergenzebene entwickelt und bietet Funktionen wie L3-Routing, schnelle kabelgebundene 10-Gbit/s-Konnektivität, Stacking und redundante Netzteile. Er bietet ein beeindruckendes PoE-Budget von 1440 W*, 48 Gigabit-RJ45-PoE+-Ports, 6 SFP+-Steckplätze mit 10 Gbit/s und physisches Stacking. Kombiniert mit zentraler Verwaltung, starker Sicherheit und umfassenden Verwaltungsfunktionen ist der SG6654XHP eine ideale, zuverlässige Netzwerklösung für KMUs, Unternehmen und ISPs. IEEE 802.3at/af-konformes Power over Ethernet:
48× IEEE 802.3at/af-konforme PoE-Ports liefern bis zu 1440 W Gesamtleistung für 802.3at- und 802.3af-Geräte,* wobei jeder Port bis zu 30 W Leistung liefert. Richten Sie drahtlose Zugangspunkte, Überwachungskameras, IP-Telefone und andere PoE-Geräte schnell und einfach ein, ohne den Aufwand und die Kosten für die Installation von Stromkabeln in Kauf nehmen zu müssen. Perpetual PoE sorgt für eine unterbrechungsfreie Stromversorgung der angeschlossenen Geräte, auch wenn der Switch neu gestartet wird. Außerdem behält der Switch dank der schnellen PoE-Funktionalität die PoE-Stromversorgungseinstellungen über Neustarts hinweg bei. Hochgeschwindigkeits-Konnektivität und leistungsstarkes Stacking:
48 Gigabit-RJ45-Ports und 6× 10-Gbit/s-SFP+-Steckplätze bieten eine Switching-Kapazität von bis zu 216 Gbit/s pro Einheit. Bis zu 4 physische Stacking-Einheiten mit einer Switching-Kapazität von bis zu 864 Gbit/s verstärken die Netzwerkstruktur mit integrierter Redundanz und Leistung. Reichhaltige Layer-3-Fähigkeiten:
Enthält zahlreiche Layer-3-Routing-Protokolle, die ein skalierbares Netzwerk unterstützen. Statisches Routing, RIP, OSPF, ECMP, VRRP, DHCP-Server und DHCP-Relay werden unterstützt. Das Multicast-Routing-Protokoll PIM-DM garantiert ein effizientes Routing für Multicast-Gruppen. Hochverfügbar:
Optionale vor Ort austauschbare und im laufenden Betrieb austauschbare redundante Netzteile und VRRP machen ihn zur idealen Wahl für eine zuverlässige Netzwerkarchitektur.** ERPS unterstützt schnellen Schutz und schnelle Wiederherstellung in einer Ringtopologie. Erhöhte Sicherheitsfunktionen:
Schutz vor einer Reihe von Netzwerkbedrohungen mit ACL-Unterstützung (IPv4 & IPv6), dynamischer ARP-Inspektion, IEEE 802.1X, MAB, Port Security und Secure Shell. Omada SDN:
Die Integration in das Omada-System bringt ein zentralisiertes Cloud-Management und eine Reihe von Management-Funktionen wie Zero-Touch Provisioning (ZTP).‡ Die Omada Software Defined Networking (SDN)-Plattform integriert Netzwerkgeräte, einschließlich Access Points, Switches und Router, und bietet ein 100 % zentralisiertes Cloud-Management - alles gesteuert von einer einzigen Schnittstelle. Der SG6654XHP kann nicht nur zentral über das Web oder die Omada-App verwaltet werden, sondern lässt sich auch über eine intuitive webbasierte grafische Benutzeroberfläche (GUI) oder eine branchenübliche Befehlszeilenschnittstelle (CLI) einfach verwalten. Bei beiden Verwaltungsmethoden ist der Datenverkehr durch SSL- oder SSH-Verschlüsselung geschützt. SNMP (v1/v2c/v3) und RMON-Unterstützung ermöglichen die Abfrage wertvoller Statusinformationen und das Senden von Traps bei anormalen Ereignissen an den Switch. *Das PoE-Gesamtbudget variiert mit den Stromversorgungsmodulen.
**Standardmäßig wird ein PSM900-AC-Modul mitgeliefert. Ein weiteres, vor Ort austauschbares, redundantes Netzteil muss separat erworben werden.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - SGS-5240-48T4X
L2+ 48Port 10/100/1000T + 4Port 10G SFP+ Stackable Managed Switch
Preis auf Anfrage
  • 48x 10/100/1000BASE-T RJ45 copper ports
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • One 10/100BASE-TX Management port 
Stacking Features:
  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 16 IP units stacked together
  • Hardware Stacking
    • Virtualized multiple SGS-5240 switch series stacked into one logical device
    • Connects with stack member via assigned 10G SFP+ interfaces
    • Single IP address stack management, supporting up to 6 hardware units stacked together
    • Stacking architecture supports redundant ring mode
IP Routing Features:
  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode 
Layer 2 Features:
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN
    • Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
    • GVRP for dynamic VLAN management
    • Protocol-based VLAN
    • MAC-based VLAN
    • IP subnet-based VLAN
    • Voice VLAN
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    • RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    • MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    • Supports BPDU & root guard
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to one)
  • Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  • Loop protection to avoid broadcast loops
  • Link Layer Discovery Protocol (LLDP)
  • Compatible with Cisco uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices 
Quality of Service:
  • Input and output rate limit per port bandwidth control
  • 8 priority queues on all switch ports
    • IEEE 802.1p CoS/DSCP/IP Precedence
    • VLAN ID
    • ACL
    • Policy-based ingress and egress QoS 
Multicast:
  • Supports IPv4 IGMP snooping v1, v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • Querier mode support
  • IPv4 IGMP snooping port filtering
  • IPv6 MLD snooping port filtering
  • MVR (Multicast VLAN Registration) 
Security:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • IEEE 802.1x authentication with guest VLAN
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • RADIUS/TACACS+ users access authentication
    • Guest VLAN assigns clients to a restricted VLAN with limited services
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List (ACL)
    • Time-based ACL
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder 
Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console and Telnet Command Line Interface 
    • HTTP web switch management
    • SNMP v1 and v2c switch management
    • SSHv2, SSLv3 and SNMP v3 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events) 
    • SNMP trap for interface Link Up and Link Down notification
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP
    • Reset button for system reboot or reset to factory default
    • Dual images
  • DHCP Functions:
    • DHCP Relay
    • DHCP Option 82
    • DHCP Server
  • User Privilege levels control
  • Network Time Protocol (NTP) and SNTP
  • Network Diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • ICMPv6/ICMPv4 remote ping
  • Syslog remote alarm
  • System Log 

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - SGS-6341-48T4X
Layer3 48Port 10/100/1000T + 4Port 10Gbit SFP+ managed Switch, stackable
Preis auf Anfrage
  • 48x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
  • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  IP Stacking:
  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together
  IP Routing Features:
  • IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
  • Routing interface provides per VLAN routing mode
  • VRRPv1/v3 protocol for redundant routing deployment
  • Supports route redistribution
  Multicast:
  • Routing FeaturesSupports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2
  Layer 2 Features:
  • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
  • Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss flow control
    • IEEE 802.3x pause frame flow control in full-duplex mode
    • Back-pressure flow control in half-duplex mode
  • High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
  • 16K MAC address table, automatic source address learning and aging
  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management
    • Up to 256 VLANs groups, out of 4041 VLAN Ids
    • Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
    • Private VLAN Edge (PVE) supported
    • GVRP protocol for Management VLAN- Protocol-based VLAN
    • MAC-based VLAN
    • IP subnet VLAN
  • Supports Link Aggregation
    • Maximum 12 trunk groups, up to 8 ports per trunk group
    • IEEE 802.3ad LACP (Link Aggregation Control Protocol)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    • RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    • MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    • Supports BPDU & root guard
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
  • Provides port mirror (many-to-1)
  Quality of Service:
  • 8 priority queues on all switch ports
  • Support for strict priority and WRR (Weighted Round Robin) CoS policies
  • Traffic classification
    • IEEE 802.1p CoS/ToS- IPv4/IPv6 DSCP- Port-based WRR
  • Strict priority and WRR CoS policies
  Multicast:
  • Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping
  • Querier mode support
  • Supports Multicast VLAN Register (MVR)
  Security:
  • IEEE 802.1x port-based network access authentication
  • MAC-based network access authentication
  • Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
  • TACACS+ login users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Supports DHCP snooping
  • Supports ARP inspection
  • IP Source Guard prevents IP spoofing attacks
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  Management:
  • Management IP for IPv4 and IPv6
  • Switch Management Interface
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1, v2c, and v3 switch management
    • SSH/SSL secure access
  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
  • SNTP (Simple Network Time Protocol) for IPv4 and IPv6
  • User privilege levels control
  • Syslog server for IPv4 and IPv6
  • Supports DDM
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
  • Supports sFlow
  • Supports ULDP
  • Supports ULPP (Uplink Protection Protocol)
  • Supports ULSM (Uplink State Monitor protocol)
  • Supports LLDP/LLDP MED
  • Supports DHCP Option82, Option37/38
  • Supports ping, trace route function for IPv4 and IPv6
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, TP-Link - TL-SG3452
JetStream™ 48-Port Gigabit L2 Managed Switch mit 4 Gigabit SFP Slots
Preis auf Anfrage
  • 48x Gigabit RJ45-Ports
  • 4x Gigabit-SFP-Slots
  • RJ45/Micro-USB-Konsolenanschluss
  • 1HE 19-Zoll-Rack-montierbares Stahlgehäuse
  • Features:
    • Statisches Routing, 802.1Q VLAN, QinQ, STP/RSTP/MSTP, IGMP Snooping, 802.1p/DSCP QoS, ACL, 802.1x, Radius/Tacacs+ Authentifizierung, LACP, CLI, SNMP, Dual Image/Konfiguration, IPv6

  • Full Gigabit Ports: 48× gigabit RJ45-Ports und 4× gigabit SFP-Slots bieten Hochgeschwindigkeitsverbindungen.
  • In Omada integriert: Zero-Touch Provisioning (ZTP)*, zentrales Cloud Management und intelligentes Monitoring.
  • Zentrales Management: Cloudzugriff und Omada App für eine ultra einfache und praktische Verwaltung.
  • Statisches Routing: Hilft bei der Weiterleitung von internen Datenübertragungen für eine effizientere Nutzung der Netzwerkressourcen.
  • Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication und mehr.
  • Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
  • Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON und Dual Image liefern leistungsstarke Managementkapazitäten
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, TP-Link - TL-SG3452P
JetStream™ 52-Port Gigabit L2+ Managed Switch mit 48-Port PoE+
Preis auf Anfrage
  • 48x Gigabit PoE+ Ports
  • 4x Gigabit-SFP-Steckplätze
  • RJ45/Micro-USB-Konsolenanschluss
  • 802.3at/af, 384 W PoE-Leistung
  • 1HE 19-Zoll-Rack-montierbares Stahlgehäuse
  • Features:
    • Integration mit Omada SDN Controller, Statisches Routing, 802.1Q VLAN, QinQ, STP/RSTP/MSTP, IGMP Snooping, 802.1p/DSCP QoS, ACL, 802.1x, Radius/Tacacs+ Authentifizierung, LACP, CLI, SNMP, Dual Image/Configuration , IPv6

  • 384 W PoE-Budget: 48× 802.3at/af-konforme PoE+-Ports mit einer Gesamtstromversorgung von 384 W*.
  • Vollständige Gigabit-Ports: 48 × Gigabit-RJ45-Ports und 4 × Gigabit-SFP-Steckplätze bieten Hochgeschwindigkeitsverbindungen.
  • Integriert in Omada SDN: Zero-Touch Provisioning (ZTP)**, zentralisiertes Cloud-Management und intelligente Überwachung.    
  • Zentralisierte Verwaltung: Cloud-Zugriff und Omada-App für höchsten Komfort und einfache Verwaltung.  
  • Statisches Routing: Hilft beim Weiterleiten des internen Datenverkehrs für eine effizientere Nutzung der Netzwerkressourcen.  
  • Robuste Sicherheitsstrategien: IP-MAC-Portbindung, ACL, Portsicherheit, DoS Defend, Storm Control, DHCP-Snooping, 802.1X, Radius-Authentifizierung und mehr.  
  • Optimieren Sie Sprach- und Videoanwendungen: L2/L3/L4 QoS und IGMP-Snooping.  
  • Eigenständige Verwaltung: Web, CLI (Konsolenport, Telnet, SSH), SNMP, RMON und Dual Image bieten leistungsstarke Verwaltungsfunktionen.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - US-48-750W
UniFi Switch, 48-Port, 750W
Preis auf Anfrage
  • Optimiert für UniFi
  • 48 Ports Gigabit PoE+
  • 2 SFP+ und 2 SFP Ports
  • max 750 Watt Output
  • Rackmontage
  Ubiquiti UniFi Switch Der Ubiquiti UniFi Switch ist ein PoE+ Gigabit Switch. Der Switch ermöglicht die simultane Verarbeitung von Traffic mit 26 Gbps (24 Port Modell) und 70Gbps (48 Port Modell) auf allen Ports ohne Paketverlust.   PoE+ Funktionalität Der Switch unterstützt sowohl Active- als auch Passive-POE (IEEE 802.af / IEEE 802.3at / 24 Volt passive) und versorgt Geräte dieser Standards mit Strom.   Leistungsstarke Hardware mit 10-Gbit Uplink (SFP) Der 48 Port UniFi Switch hat 2 SFP+ Ports welche Glasfaserverbindungen mit bis zu 10 Gbps ermöglichen.   Der UniFi Controller Die UniFi Controller Software ermöglicht den Administratoren die Verwaltung des UniFi Switches und aller anderen UniFi Geräte über eine graphische Oberfläche. Die Software ist frei erhältlich und kann über www.ubnt.com heruntergeladen werden.   Multi-Site Management Eine Instanz des UniFi Controllers in der Cloud ermöglicht die zentralisierte Verwaltung von mehreren UniFi Instanzen von verschiedenen Standorten. Jede Instanz hat sein eigenes Netzwerk Monitoring.   Switch Konfiguration Die Konfiguration des Switches erfolgt über die UniFi Software, so lassen sich verschiedene Features nutzen wie z.B.:
  • PoE Einstellung für jeden einzelnen Port
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - USW-PRO-MAX-48
UniFi USW Pro Max PoE 48-Port Gigabit Layer 3 Etherlighting™ Switch
Preis auf Anfrage
  • Layer-3-Etherlighting™-Switch mit 48 Ports 
  • Etherlighting™-Ports, die zur Anzeige von Portposition, Geschwindigkeit/Link und nativem VLAN/Netzwerk leuchten*
  • 16x 2,5 GbE
  • 32x GbE-Anschlüsse
  • 4x 10G SFP+-Anschlüsse
  • DC Power Backup ready
  • Verwaltet mit UniFi Network 8.0.24 und höher

*in Kombination mit UniFi Etherlighting Patch-Kabeln für optimale Helligkeit.
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - USW-PRO-MAX-48-POE
UniFi USW Pro Max PoE 802.3at/bt 48-Port Gigabit Layer 3 Etherlighting™ Switch
Preis auf Anfrage
  • Layer-3-Etherlighting™-Switch mit 48 Ports und PoE++-Ausgang mit hoher Leistung.
  • Etherlighting™-Ports, die zur Anzeige von Portposition, Geschwindigkeit/Link und nativem VLAN/Netzwerk leuchten*
  • 16x 2,5 GbE-PoE++-Ports
  • 32x GbE-Anschlüsse, einschließlich 24x PoE+ und 8x PoE++
  • 4x 10G SFP+-Anschlüsse
  • DC Power Backup ready
  • 720 W PoE-Gesamtverfügbarkeit

*in Kombination mit UniFi Etherlighting Patch-Kabeln für optimale Helligkeit.
Verfügbarkeit:
im Zulauf
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /