SHOP

Aktive Komponenten Switche

(26 Treffer)
Switche
Hersteller
MikroTikMikroTikMoxaMoxaPLANETPLANETUbiquitiUbiquiti
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
Netzwerk Ports
101010-Port10-Port12-Port12-Port14-Port14-Port15-Port15-Port16-Port16-Port2-Port2-Port20-Port20-Port242424-Port24-Port24-Ports24-Ports28-Port28-Port3-Port3-Port444-Port4-Port48-Port48-Port5-Port5-Port666-Port6-Port7-Port7-Port8-Port8-Port9-Port9-Port
1GBit Ports
11101012121313161616 / 8 modular16 / 8 modular1818222 (Combo)2 (Combo)20202424282833444 (Combo)4 (Combo)4848556677888 (Combo)8 (Combo)99bis zu 160bis zu 160Ø 119 x 90 mmØ 119 x 90 mm
1GBit/SFP Kombi Ports
1116162224244488
100MBit Ports
111212141415151616222424334448485566777 + 17 + 18899
SFP+ Ports
1112121616222 (Combo)2 (Combo)2424444 (Combo)4 (Combo)4 Combo4 Combo484888up to 60up to 60
SFP Ports
1110101212161616 / 8 modular16 / 8 modular222 (Combo)2 (Combo)2424444 (Combo)4 (Combo)4 Combo mit 10Gb RJ454 Combo mit 10Gb RJ4548485588
SFP 100/1000Mbps Ports
111616222 (Combo)2 (Combo)20202424444 (Combo)4 (Combo)48485588bis zu 156bis zu 156SFP 100/1000Mbps Ports [ports_sfp_100_1000mb]SFP 100/1000Mbps Ports [ports_sfp_100_1000mb]
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, MikroTik - CRS305-1G-4S+IN
CRS305-1G-4S+IN Desktop Switch 1x Gbit, 4x SFP+ 10Gbps
Preis auf Anfrage
  • 1 Port Gigabit Switch
  • 4x SFP+ 10Gbit Anschluss
  • PoE In
  • MikroTik RouterOS / SwitchOS
  • Lizenz level 5
  • Metallgehäuse, lüfterlos
  • Redudante Stromversorgung
  Der CRS305 ist ein kompakter, aber sehr leistungsfähiger Switch mit vier SFP+ Ports für bis zu 10 GBit pro Port. Das Gerät verfügt über einen 1 Gbit Kupfer-Ethernet-Port für den Management-Zugriff und zwei DC-Buchsen für die Stromredundanz. Das Gerät ist ein sehr schlankes und kompaktes Metallgehäuse ohne Lüfter für geräuscharmen Betrieb.   Das Gerät verfügt über eine "Dual Boot"-Funktion, mit der Sie zwischen zwei Betriebssystemen wählen können - RouterOS oder SwOS. Wenn Sie ein vereinfachtes Betriebssystem mit nur Switch-spezifischen Funktionen bevorzugen, verwenden Sie SwOS. Wenn Sie Routing- und andere Layer 3-Funktionen in Ihrem CRS verwenden möchten, verwenden Sie RouterOS. Sie können das gewünschte Betriebssystem von RouterOS, von SwOS oder von den RouterBOOT Loader-Einstellungen auswählen. All das Feature-Set kommt mit einem disruptiven Preis und bietet das beste Preis- / Leistungsverhältnis auf dem Markt.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-205A / EDS-208A
EDS-205A/208A Serie, unmanaged Ethernet Switche
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 22
mehr Informationen
zu Favoriten
Hersteller, Moxa - EDS-305 / EDS-308
EDS-305/308 Serie, unmanaged Ethernet Switche
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 23
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-G205-1GTXSFP(-T)
Unmanaged full Gigabit Ethernet switch with 4 10/100/
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-G205A-4POE(-1GSFP)
EDS-G205A-4PoE Serie, Gigabit unmanaged Switche, PoE Ports
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 4
mehr Informationen
zu Favoriten
Aktive Komponenten, Moxa - EDS-P206A-4POE©
EDS-P206A-4PoE Serie, unmanaged Switche, PoE Ports
Preis auf Anfrage
Verfügbarkeit:
nicht lagernd
Login für mehr Info
Varianten: 14
mehr Informationen
zu Favoriten
Hersteller, PLANET - FSD-504HP
4-Port 10/100Mbps 802.3af/at POE + 1-Port 10/100MBPS (60W)
Preis auf Anfrage
  • Five 10/100Mbps Fast Ethernet ports
  • 4 ports support 51V DC power to PoE powered device
  • unmanaged
  Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE
  • Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • 60-watt PoE budget
  • Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m in the standard mode
  Switching
  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • 1536bytes packet size support
  • Integrates address look-up engine, supporting 1K absolute MAC addresses
  • Automatic address learning and address aging
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Hardware
  • Desktop palm size
  • LED indicators for PoE ready/activity and LINK/ACT
  • One 51V DC power jack
  Easy Deployment for SOHO and Home Users PLANET FSD-504HP, a 4-port 10/100Mbps 802.3at/af Power over Ethernet + 1-port Fast Ethernet Switch, can be easily and quickly deployed for SOHO and home-use PoE application environment by any users as it is compact in size and simple to install. The FSD-504HP is definitely an ideal solution for SOHO and home users as it has the following advanced features:
    • 4-port PoE, 60-watt PoE budget
    • One 10/100Mbps uplink port
    • 250m distance w/30W power output at speed of 10Mbps in the Extend Mode
    • Desktop palm-size design
   Centralized Power Distribution for Small Ethernet Networking The FSD-504HP has a total PoE budget of 60 watts, which is an ideal solution to meeting the demand for sufficient PoE power for network applications. The four 802.3at/af PoE ports provide PoE power injector function which is able to drive two IEEE 802.3at compliant powered devices or four IEEE 802.3af compliant powered devices. The FSD-504HP also provides a simple, cost-effective and non-blocking wire-speed performance. It comes with a palm-size metal housing, suitable for the desktop deployment of SOHO or home-use network environment.    Ideal Solution for Securing SOHO IP Surveillance Infrastructure Targeting the growing popular IP surveillance applications, the FSD-504HP 802.3at/af PoE Switch is also positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FSD-504HP supports both 802.3at and 802.3af PoE standards along with four 10/100BASE-TX ports featuring up to 30 watts per RJ45 copper interface, and one extra Fast Ethernet TP interface supporting high-speed transmission of surveillance images and videos.    802.3at/af PoE Power and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The FSD-504HP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. In the “Extend” operation mode, the FSD-504HP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-504HP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.    Easy Cable Connection With data switching and power over Ethernet integrated into one unit, the FSD-504HP reduces cabling requirements and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the FSD-504HP is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-5225-4P2S
Industrial 4-Port Gbit 802.3at PoE + 2x SFP managed Switch, IP30, -40°C - 75°C
Preis auf Anfrage
  • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
  • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
  • One RJ45 console interface for basic management and setup
  Power over Ethernet:
  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 4 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE management features
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority- Per PoE port power limit
    • PD classification detection
  • Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PD alive check
    • PoE schedule
  Industrial Protocol:
  • Modbus TCP for real-time monitoring in a SCADA system
  • IEEE 1588v2 PTP (Precision Time Protocol)
  Industrial Case and Installation:
  • IP40 metal case
  • DIN-rail and wall-mount designs
  • 48~56V DC, redundant power with polarity reverse protect function
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Layer 2 Features:
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4094 VLAN Ids
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • Voice VLAN
    • GVRP (GARP VLAN Registration Protocol)Supports
  • Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 2 trunk groups with 2 ports per trunk group
    • Up to 4Gbps bandwidth (duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)
  • Compatible with Cisco Uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
  • Link Layer Discovery Protocol (LLDP)
  Layer 3 IP Routing Features:
  • Supports maximum 32 static routes and route summarization
  Quality of Service:
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • IP TOS/DSCP/IP precedence
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic policing on the switch port
  • DSCP remarking
  Multicast:
  • Supports IPv4 IGMP snooping v1, v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security:
  • Authentication
    • IEEE 802.1x Port-based/MAC-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console/Telnet Command Line Interface
    • Web switch management
    • SNMP v1 and v2c switch management
    • SSH/SSL and SNMP v3 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events)
    • SNMP trap for interface Link Up and Link Down notification
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual Images
  • DHCP Relay and DHCP Option 82
  • DHCP Server
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • SFP-DDM (Digital Diagnostic Monitor)
  • Network Diagnositc
    • ICMPv6/ICMPv4 Remote Ping
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • PLANET Smart Discovery Utility for deployment management
   
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-5225-4T2S
Industrial L2+/4 4Port Gbit + 2Port 100/1000X SFP managed Switch
Preis auf Anfrage
Physical Port
  • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
  • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
  • One RJ45 console interface for basic management and setup
  Industrial Case and Installation
  • IP30 metal case
  • DIN rail and wall-mount design
  • 12~48V DC, redundant power with polarity reverse protect function
  • 24V AC power input acceptable
  • Supports 5000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Layer 2 Features
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
- Broadcast/Multicast/Unicast
  • Supports VLAN
- IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups, out of 4094 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Private VLAN Edge (PVE) - Protocol-based VLAN- MAC-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP) - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN - BPDU Guard
  • Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 4 trunk groups with 4 ports per trunk group - Up to 8Gbps bandwidth (duplex mode) - Provides port mirror (1-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loopsv
  • Supports ERPS (Ethernet Ring Protection Switching)
  Layer 3 IP Routing Features
  • Supports maximum 32 static routes and route summarization
  Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
- IEEE 802.1p CoS - IP TOS/DSCP/IP precedence - IP TCP/UDP port number - Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking
  Multicast
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security
  • IEEE 802.1X Port-based/MAC-based network access authentication
  • Built-in RADIUS client to cooperate with the RADIUS servers
  • TACACS+ login users access authentication
  • RADIUS/TACACS+ users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Source MAC/IP address binding
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management
  • Switch Management Interfaces
- Console/Telnet Command Line Interface - Web switch management - SNMP v1 and v2c switch management - SSH/SSL and SNMP v3 secure access
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via HTTP/TFTP
  • DHCP Relay
  • DHCP Option 82
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP)
  • SFP-DDM (Digital Diagnostic Monitor)
  • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • Reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility for deployment management
        An Ideal Fiber Switch with Limited Space PLANET IGS-5225-4T2S is the smallest, fully-managed Gigabit fiber switch in the industrial networking industry that features 4 10/100/1000Mbps copper ports, 2 100/1000X SFP ports and redundant power system in an IP30 rugged but compact-sized case, can be installed in any difficult environment without space limitation. Within such slim enclosure, it provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. The IGS-5225-4T2S can operate stably under the temperature range from -40 to 75 degrees C and allows either DIN rail or wall mounting for efficient use of cabinet space. With 2 dual-speed SFP fiber slots, it can be flexibly applied to extend the connection distance.   Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms.   SMTP/SNMP Trap Event Alert The IGS-5225-4T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.   Effective Alarm Alert for Better Protection The IGS-5225 series supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.   Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application.   Robust Layer 2 Features The IGS-5225 series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225 series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 8 ports per trunk group, and supports fail-over as well.   Efficient Management For efficient management, the IGS-5225 Managed Ethernet Switch series is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225 series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225 series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session.   Powerful Security The IGS-5225 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.   Flexibility and Extension Solution The additional two mini-GBIC slots built in the IGS-5225-4T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The IGS-5225 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.   1588 Time Protocol for Industrial Computing Networks The IGS-5225 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.   Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-604HPT-M12
IP67-rated Industrial L2+ 4-Port 10/100/1000T, M12, IEEE 802.3at
Preis auf Anfrage
6-port 10/100/1000BASE-T waterproof and dustproof M12 connectors with 4-port IEEE 802.3at/af Power over Ethernet Injector function   Hardware Conformance:
  • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
  • Complies with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
    • Total PoE power budget controlPer port PoE function enable/disable
    • PoE Port Power feeding priority- Per PoE port power limitation
    • PD classification detection
    • PD alive check- PoE schedule- PD scheduled power recycling
  Hardware Conformance:
  • IP67-rated aluminum case
  • Redundant power design
    • -48 to 56V DC, redundant power with polarity reverse protect function
    • Active-active redundant power failure protection
    • Backup of catastrophic power failure on one supply
    • Fault tolerance and resilienceDIN-rail and wall-mount design
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Layer 3 IP Routing Features:
  • Supports maximum 32 static routes and route summarization
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Storm control support
    • Broadcast/Multicast/UnicastSupports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4095 VLAN Ids
    • Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • IP subnet-based VLAN
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 3 trunk groups, with 2 ports for each trunk
    • Up to 4Gbps bandwidth (full duplex mode) Provides port mirror (many-to-1)
  • Port mirroring monitors the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports E.R.P.S. (Ethernet Ring Protection Switching)
  • IEEE 1588 and synchronous Ethernet network timing
  Quality of Service:
  • Ingress shaper and egress rate limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS- ToS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic-policing policies on the switch port
  • DSCP remarking
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security t:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • IEEE 802.1x authentication with guest VLAN
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List (ACL)
  • Source MAC/IP address binding
  •  DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Telnet command line interface
    • Web switch management
    • SNMP v1, v2c, and v3 switch management
    • SSH/SSL secure access
  • IPv6 address/NTP management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual images
  • DHCP relay and option 82
  • User privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network diagnostic
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • ICMPv6/ICMPv4 remote ping
  • SMTP/Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface link up and link down notification
  • System Log
  • PLANET Smart Discovery Utility for deployment management
   
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-604HPT-RJ
IP67-rated Industrial L2+ 4-Port 10/100/1000T, IEEE 802.3at
Preis auf Anfrage
  • 6-port 10/100/1000BASE-T waterproof and dustproof RJ45 copper
  • 4-port IEEE 802.3at/af Power over Ethernet Injector function
  Hardware Conformance:
  • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
  • Complies with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE Port Power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • PD alive check
    • PoE schedule
    • PD scheduled power recycling
  Hardware Conformance:
  • IP67-rated aluminum case
  • Redundant power design
    • 48 to 56V DC, redundant power with polarity reverse protect function
    • Active-active redundant power failure protection
    • Backup of catastrophic power failure on one supply
    • Fault tolerance and resilience
  • DIN-rail and wall-mount design
  • Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Layer 3 IP Routing Features:
  • Supports maximum 32 static routes and route summarization
  Layer 2 Features:
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Storm control support
    • Broadcast/Multicast/Unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4095 VLAN Ids
    • Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • IP subnet-based VLAN
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D Spanning Tree Protocol
    • RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    • MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 3 trunk groups, with 2 ports for each trunk
    • Up to 4Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring monitors the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports E.R.P.S. (Ethernet Ring Protection Switching)
  • IEEE 1588 and Synchronous Ethernet network timing
  Quality of Service:
  • Ingress shaper and egress rate limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • ToS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network applicationStrict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic-policing policies on the switch port
  • DSCP remarking
  Multicast:
  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)
  Security:
  • Authentication
    • IEEE 802.1x port-based/MAC-based network access authentication
    • IEEE 802.1x authentication with guest VLAN
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List (ACL)
  • Source MAC/IP address binding
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder
  Management:
  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Telnet command line interface
    • Web switch management
    • SNMP v1, v2c, and v3 switch management
    • SSH/SSL secure accessIPv6 address/NTP management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual imagesDHCP relay and option 82
  • User privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network diagnostic
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • ICMPv6/ICMPv4 remote pingSMTP/Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface link up and link down notification
  • System Log
  • PLANET Smart Discovery Utility for deployment management
   
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-620TF
Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Switch
Preis auf Anfrage
  • 4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function (unmanaged)
  • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Fiber Port Redundancy
  • Link status auto-detect and redundant on Dual ports with the same connector type
  • Only Primary-Port is active at a time, the Backup-Port is blocked
  • When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
  Layer 2 Features
  • Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
  • 9K Jumbo Frame Size support
  • Backplane (Switching Fabric): 12Gbps
  • Integrated address look-up engine, support 1K absolute MAC addresses
  • Automatic address learning and address aging
  • CSMA/CD Protocol
Industrial Case / Installation
  • Slim IP30 metal case protection
  • DIN Rail and Wall Mount Design
  • Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function - AC 24V power adapter acceptable
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Flexible, Reliable and Industrial-grade Network Distance Extension Solution The PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port 10/100/1000Base-T RJ-45 copper and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-620TF is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.   Fiber-Optical Link Capability Enables Extension of Network Deployment The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber cable), also the Fast Ethernet distance can be extended from 2km (Multi-Mode fiber cable) up to 20/40/60 kilometers (Single-Mode fiber cable). They are well suited for applications within the factory data centers and distributions   Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode The two SFP slots allow to change the operation mode with its built-in DIP switch. Via the built-in DIP switch, the IGS-620TF can be configured as 6-port Ethernet switch or 4+2 fiber redundant mode. With the 6-port switch mode, the IGS-620TF can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.    Environmentally Hardened Design The IGS-620TF is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-620TF provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-620TF can be placed in almost any difficult environment. The IGS-620TF also allows either DIN rail or wall mounting for efficient use of cabinet space.   Convenient and Reliable Power System To enhance the operation reliability and flexibility, the IGS-620TF is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IGS-624HPT
Industrial 4Port Gbit PoE+ + 2Port Gbit SFP Switch
Preis auf Anfrage
  • 4-port 10/100/1000Base-T RJ-45 with IEEE 802.3af / 802.3at PoE Injector
  • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Power over Ethernet
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Plus End-Span PSE
  • Up to 4 IEEE 802.3af / 802.3at devices powered
 
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Provides DC 52V power over RJ-45 Ethernet cable to PD with Ethernet port
  • Auto-detects EEE 802.3af/at equipment and protects devices from being damaged by incorrect installation
  • Remote power feeding up to 100m
Layer 2 Features
  • Supports Auto-Negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control (full-duplex)
  • Automatic address learning and address aging
Industrial Case / Installation
  • IP30 aluminum metal case protection
  • Dual SFP Ports Auto Link Redundant Mode Support
  • DIN Rail and Wall Mount Design
  • 48V DC redundant power with polarity reverse protect function and removable terminal block for master and slave power
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  Long Distance High Power PoE and Gigabit Data Extension Solution The PLANET IGS-624HPT is an Industrial Gigabit 802.3at PoE+ Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port 10/100/1000Base-T copper with 802.3af/at PoE injector and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-624HPT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.   High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications, the IGS-624HPT provides 4 10/100/1000Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30-watt of power output and data per port over one Cat.5E / 6 Ethernet cable. With totally 120-watt PoE output capability on the whole system, the IGS-624HPT is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.    Intelligent LED Indicator for Real-time PoE Usage The IGS-624HPT helps users to monitor current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the Industrial Gigabit PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.    Convenient and Reliable Power System To facilitate the 802.3at High Power PoE usage with the commonly used 48V DC power input in transportation and industrial-level applications, the IGS-624HPT adopts 48V DC to 52V DC power boost technology to solve power source issue which is not required for special power supplies to achieve the level of High Power PoE+ output. To enhance the operation reliability and flexibility, the IGS-624HPT is equipped with two DC power input connectors for redundant power supply installation.      High Power Budget for PoE Extension With 30-watt PoE output capability, the IGS-624HPT can extend much longer distance by using PLANET PoE Extender for powering up the IEEE 802.3af PoE PD devices which can be installed over more than 100 meters away. By daisy-chaining multiple PLANET PoE Extenders, it offers the great flexibility of doubling, tripling or quadrupling the distance of PoE network.    Environmentally Hardened Design The IGS-624HPT is equipped with the rugged IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-624HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-624HPT can be placed in almost any difficult environment. The IGS-624HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.   Fiber-Optical Link Capability Extend the Range of Network Deployment The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber or WDM fiber).      Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode Via the built-in DIP switch, the IGS-624HPT can be configured as 6-port Ethernet switch or 4+2 fiber redundant mode. With the 6-port switch mode, the IGS-624HPT can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link down, it will forward the packet to the other port of the backup pair.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-511
IP30 Slim Type 4-Port Industrial Switch + 1x 100FX SFP
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511
  • 1-port 100Base-FX interface for up to 15km (Single-mode fiber 9µm/125µm) on ISW-511S15
  Layer 2 Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1Gbps
  • Integrated address look-up engine, support 2K absolute MAC addresses
  • 1 Mbit on-chip frame buffer
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  Industrial Case / Installation
  • IP-30 metal case / protection
  • DIN rail and wall mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -10 to 60 degrees C operating temperature 
    New slim type with more practicability and convenience PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.   Stable Operating Performance under Difficult Environments The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-511S15
IP30 Slim Type 4-Port Industrial Switch + 1x 100FX SFP
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511
  • 1-port 100Base-FX interface for up to 15km (Single-mode fiber 9µm/125µm) on ISW-511S15
  Layer 2 Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1Gbps
  • Integrated address look-up engine, support 2K absolute MAC addresses
  • 1 Mbit on-chip frame buffer
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  Industrial Case / Installation
  • IP-30 metal case / protection
  • DIN rail and wall mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -10 to 60 degrees C operating temperature
    New slim type with more practicability and convenience PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.   Stable Operating Performance under Difficult Environments The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-511T
IP30 Slim 4-Port Industrial Ethernet Switch + 1Port FX SFP
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI / MDI-X function for ISW-511T series
• 1-port 100Base-FX interface on ISW-511T for up to 2km (multi-mode fiber 62.5/125μm, 50/125µm) transmission distance • 1-port 100Base-FX interface on ISW-511TS15 for up to 15km (single-mode fiber 9/125µm) transmission distance   Layer 2 Features • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port • High performance Store and Forward architecture • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Backplane (Switching Fabric): 1Gbps • Integrated address look-up engine, supports 2K absolute MAC addresses • 1Mbit on-chip frame buffer • Automatic address learning and address aging • CSMA / CD Protocol   Industrial Case / Installation • IP-30 metal case / protection • DIN rail and wall mount design • 12 to 48V DC, redundant power with polarity reverse protection and connective removable  terminal block for master and slave power • Supports EFT protection 6000V DC for power line • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C wide operating temperature  
Highly Convenient and Feasible Industrial Robust Switch PLANET has upgraded two models named ISW-511T and ISW-511TS15 for use in environments with wide operating temperature. The capital ‘T’ (ISW-511T and ISW-511TS15) shown in the model names means that they can support and operate under WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know the temperature in many places and countries of the world are lower than -10 degrees C, these two new models, ISW-511T and ISW-511TS15, will be the right products for Transportation, Manufacturing, Security and Surveillance network deployments in those harsh environments. The ISW-511T / ISW-511TS15 also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.   Distance Extendable and Flexibility The ISW-511T and ISW-511TS15 each includes four 10/100Base-TX auto-negotiation ports and one 100Base-FX port. The ISW-511T is equipped with 100Base-FX multi-mode SC interfaces for transmission distance up to 2km and ISW-511TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission distance up to 15km. Users can choose the suitable model for network deployment either for long distance (ISW-511TS15) or short distance (ISW-511T) transmission.   Easy Installation and Wide Range of Power Usage The ISW-511T and ISW-511TS15 are designed with a compact case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-511TS15
IP30 Slim 4-Port Industrial Ethernet Switch + 1Port FX SFP
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI / MDI-X function for ISW-511T series
• 1-port 100Base-FX interface on ISW-511T for up to 2km (multi-mode fiber 62.5/125μm, 50/125µm) transmission distance • 1-port 100Base-FX interface on ISW-511TS15 for up to 15km (single-mode fiber 9/125µm) transmission distance   Layer 2 Features • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port • High performance Store and Forward architecture • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Backplane (Switching Fabric): 1Gbps • Integrated address look-up engine, supports 2K absolute MAC addresses • 1Mbit on-chip frame buffer • Automatic address learning and address aging • CSMA / CD Protocol   Industrial Case / Installation • IP-30 metal case / protection • DIN rail and wall mount design • 12 to 48V DC, redundant power with polarity reverse protection and connective removable  terminal block for master and slave power • Supports EFT protection 6000V DC for power line • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C wide operating temperature     Highly Convenient and Feasible Industrial Robust Switch PLANET has upgraded two models named ISW-511T and ISW-511TS15 for use in environments with wide operating temperature. The capital ‘T’ (ISW-511T and ISW-511TS15) shown in the model names means that they can support and operate under WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know the temperature in many places and countries of the world are lower than -10 degrees C, these two new models, ISW-511T and ISW-511TS15, will be the right products for Transportation, Manufacturing, Security and Surveillance network deployments in those harsh environments. The ISW-511T / ISW-511TS15 also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.   Distance Extendable and Flexibility The ISW-511T and ISW-511TS15 each includes four 10/100Base-TX auto-negotiation ports and one 100Base-FX port. The ISW-511T is equipped with 100Base-FX multi-mode SC interfaces for transmission distance up to 2km and ISW-511TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission distance up to 15km. Users can choose the suitable model for network deployment either for long distance (ISW-511TS15) or short distance (ISW-511T) transmission.   Easy Installation and Wide Range of Power Usage The ISW-511T and ISW-511TS15 are designed with a compact case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-514PSF
4Port 10/100Mbps PoE + 1-Port Fiber(SFP) Industrial Switch
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE Injector
  • 1-port 100Base-FX SFP interface
  IEEE 802.3af PoE • Complies with IEEE 802.3af Power over Ethernet End-Span PSE • Up to 4 IEEE 802.3af devices powered • Supports PoE Power up to 15.4 watts for each PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m   Layer 2 Features   • Supports auto negotiation and 10/100Mbps half / full duplex and auto MDI/MDI-X • High performance Store and Forward architecture, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Automatic address learning and address aging   Industrial Case / Installation   • IP-30 aluminum metal case protection • DIN rail and wall mount design • 24 or 48V DC, redundant power with polarity reverse protect function • Supports EFT 6000V DC protection for power line • Supports Ethernet ESD 6000V DC protection • -40 to 75 degrees C operating temperature     PLANET ISW-514PS series, a Web Management Industrial PoE Switch, is designed to transmit power and data over single Ethernet cable to remote PoE capable devices and performs intelligent PoE control, power usage monitoring and smart Layer 2 switching management in industrial harsh environments. The ISW-514PS series provides four 10/100Mbps copper ports supporting IEEE 802.3af Power over Ethernet injector and one 100Base-FX fiber optic interface delivered in an IP30 rugged strong case. Supporting up to 15.4-watt power per port for any remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN access point, the ISW-514PS series is an ideal solution to deploying surveillance system and wireless service in climatically demanding wide temperature range (-10 to 60 degrees C) environments.   IEEE 802.3af Power over Ethernet Industrial Switch   PoE feature is more often supported in the industrial Ethernet devices for efficient operation in harsh environments. The ISW-514PS series in-line power follows standard IEEE 802.3af and able to give power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With Data and Power over Ethernet from one unit, the ISW-514PS series can reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power lowers the installation costs, simplifies the installation effort and eliminates the need for electricians or extension cords. Furthermore, as there is only 24V DC input in some industrial environments, the ISW-514PS series supports 24V DC or 48V DC dual voltages input and is able to provide more wide-ranging industrial IEEE 802.3af PoE applications.   Fiber Optic Link Capability for Flexible Distance Extension   The ISW-514PS series is equipped with one 100Base-FX port that provides more flexibility for Transportation, Manufacturing, Security and Surveillance on distance extension without any limitation. The ISW-514PS series offers high performance switch architecture as shown below:
    • ISW-514PS: comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 2km)
    • ISW-514PS15: comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 15km)
    • ISW-514PSF: comes with 4 10/100Mbps UTP ports and 1 100FX (LC interface within optional of Single / multi-mode SFP module)
  Excellent Web Smart Features   For efficient management, the ISW-514PS series is built with Web-based management design to offer a user-friendly configuration interface. It makes the ISW-514PS series easy to survey and control the PoE power provision to the devices via the Web interface. The ISW-514PS series features Web Smart functions including 802.1Q VLAN, bandwidth control, QoS, PoE Configuration, Port Management, Alert Trap Configuration and more. These features provide a cost-effective way to manage the network devices through the Internet whenever you are at work or at home.   Environmentally Hardened Design   With IP30 industrial case protection, the ISW-514PS series provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. The aluminum metal case helps cooling much faster and enables the Industrial PoE Switch to operate stably under the harsh temperature environment ranging from -10 to 60 degrees C. Therefore, the web management Industrial PoE Switch can be placed in almost any difficult environment. It also offers dual-redundant, reversible polarity 24V DC or 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-514PTF©
4Port 10/100Mbps PoE + 1-Port Fiber(SFP) Industrial Switch
Preis auf Anfrage
  • 4-Port 10/100Base-TX RJ-45 with IEEE 802.3af PÜoE injector
  • 1-port 100Base-FX SFP interface
 
IEEE 802.3af PoE
  • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  • Up to 4 IEEE 802.3af devices powered
  • Supports PoE Power up to 15.4 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
 
Layer 2 Features 
  • Supports auto negotiation and 10/100Mbps half / full duplex and auto MDI/MDI-X
  • High performance Store and Forward architecture, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Automatic address learning and address aging
 
Industrial Case / Installation 
  • IP-30 aluminum metal case protection
  • DIN rail and wall mount design
  • 24 or 48V DC, redundant power with polarity reverse protect function
  • Supports EFT 6000V DC protection for power line
  • Supports Ethernet ESD 6000V DC protection
  • -40 to 75 degrees C operating temperature
 
PLANET ISW-514PT PoE Industrial Ethernet Switch is designed to transmit power and data over single Ethernet cable to remote PoE capable devices and operates reliably in heavy industrial demanding environments. The ISW-514PT series provides four 10/100Mbps copper ports supporting IEEE 802.3af Power over Ethernet injector and one 100Base-FX fiber optic interface delivered in an IP-30 rugged strong case. Supporting up to 15.4-watt power per port for any remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN access point, the ISW-514PT series is an ideal solution to deploying surveillance system and wireless service in climatically demanding wide temperature range (-40 to 75 Degree C) environments. The 100Base-FX fiber optic uplink port provides long distance, high speed and stable data transmission to remote core network.
 
IEEE 802.3af Power over Ethernet PSE Industrial Switch
PoE feature is more often supported in the industrial Ethernet devices for efficient operation in harsh environments. The ISW-514PT series in-line power follows standard IEEE 802.3af and allows to supply power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With Data and Power over Ethernet from one unit, the ISW-514PT series can reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power results in lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords.Furthermore,there is only 24V DC input in some industrial environments, the ISW-514PT series supports 24V DC or 48V DC dual voltages input and able to provide more wide range of industrial IEEE 802.3af PoE applications.
 
Fiber Optic Link Capability for Flexible Distance Extension
The ISW-514PT series is equipped with one 100Base-FX port that provides more flexibility for Transportation, Manufacturing, Security and Surveillance on distance extension without any limitation. The ISW-514PT series offers high performance switch architecture as shown below:
  • ISW-514PT:comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 2km)
  • ISW-514PT15:comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 15km)
  • ISW-514PTF. comes with 4 10/100Mbps UTP ports and 1 100FX (LC interface within optional of Single / Multi-Mode SFP module)
Fiber optic uplink capability makes the ISW-514PT series a suitable model for long distance network deployment. Users can choose the suitable model for network deployment if required.
 
Wide Temperature Makes Installation Suitable for Harsh Environments
The ISW-514PT series provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 Degree C, the ISW-514PT series can be placed in almost any difficult environment. It also offers dual-redundant, reversible polarity 24V DC or 48V DC power inputs for high availability applications requiring or backup power inputs.
 
Robust Switch performance
The ISW-514PT series provides non-blocking switch fabric, wire-speed throughput as high as 1Gbps and the 2K MAC Address table. It also performs wire-speed packets transfer without risk of packet loss and the Flow Control function is default enabled to provide fast and reliable data transfer. All of the RJ-45 copper interfaces support 10/100Mbps auto-negotiation for optimal speed detection through RJ-45 Category 3, 4, 5, 5e or 6 cable. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-621
IP30 4-Port 10/100Base +Port 100Base-FX Ethernet Switch
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 2-port 100Base-FX interfaces for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-621
  • 2-port 100Base-FX interfaces for up to 15km (Single-mode fiber 9µm/125µm) on ISW-621S15
  Layer 2 Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1.2Gbps
  • Integrated address look-up engine, support 2K absolute MAC addresses
  • 1 Mbit on-chip frame buffer
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  Industrial Case / Installation
  • IP-30 metal case / protection
  • DIN rail and wall mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for      master    
   and slave power
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -10 to 60 degrees C operating temperature 
  New slim type with more practicability and convenience PLANET has released the ISW-621/ISW-621S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. Each of them is equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-621 has 2 100Base-FX multi-mode SC interfaces for transmission distance up to 2km, and the ISW-621S15 has 2 100Base-FX single-mode SC interfaces for transmission distance up to 15km, both of them operate reliably in Heavy Industrial demanding environments. Meanwhile, the compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.   Stable operating performance under difficult environments The ISW-621 / ISW-621S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-621/ISW-621S15 can be placed in almost any difficult environment. The ISW-621/ISW-621S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The ISW-621/ISW-621S15 each provides 4 10/100Base-TX Ethernet ports and 2 100Base-FX optic-fiber SC interfaces, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The flow control function allows the ISW-621/ISW-621S15 to have fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-621/ISW-621S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-621S15
IP30 Slim Type 4-Port Industrial Ethernet Switch
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 2-port 100Base-FX interfaces for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-621
  • 2-port 100Base-FX interfaces for up to 15km (Single-mode fiber 9µm/125µm) on ISW-621S15
  Layer 2 Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1.2Gbps
  • Integrated address look-up engine, support 2K absolute MAC addresses
  • 1 Mbit on-chip frame buffer
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  Industrial Case / Installation
  • IP-30 metal case / protection
  • DIN rail and wall mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and
  • connective removable terminal block for master and slave power
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -10 to 60 degrees C operating temperature  
  New slim type with more practicability and convenience PLANET has released the ISW-621/ISW-621S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. Each of them is equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-621 has 2 100Base-FX multi-mode SC interfaces for transmission distance up to 2km, and the ISW-621S15 has 2 100Base-FX single-mode SC interfaces for transmission distance up to 15km, both of them operate reliably in Heavy Industrial demanding environments. Meanwhile, the compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.   Stable operating performance under difficult environments The ISW-621 / ISW-621S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-621/ISW-621S15 can be placed in almost any difficult environment. The ISW-621/ISW-621S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The ISW-621/ISW-621S15 each provides 4 10/100Base-TX Ethernet ports and 2 100Base-FX optic-fiber SC interfaces, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The flow control function allows the ISW-621/ISW-621S15 to have fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-621/ISW-621S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-621T
IP30 Slim Type 4-Port Industrial Ethernet Switch
Preis auf Anfrage
4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function for ISW-621T series • 2-port 100Base-FX interface on ISW-621T for up to 2km (multi-mode fiber 62.5/125μm, 50/125µm) transmission distance • 2-port 100Base-FX interface on ISW-621TS15 for up to 15km (single-mode fiber 9/125µm) transmission distance   Layer 2 Features • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port • High performance Store and Forward architecture • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Backplane (Switching Fabric): 1.2Gbps • Integrated address look-up engine, supporting 2K absolute MAC addresses • 1Mbit on-chip frame buffer • Automatic address learning and address aging • CSMA/CD Protocol   Industrial Case / Installation • IP30 metal case / protection • DIN rail and wall mount design • 12 to 48V DC, redundant power with polarity reverse protection and connective removable  terminal block for master and slave power • Supports EFT protection 6KV DC for power line • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C wide operating temperature   Highly Convenient and Feasible Industrial Robust Switch PLANET has upgraded two models named ISW-621T and ISW-621TS15 for use in environments with wide operating temperature. The capital ‘T’ (ISW-621T and ISW-621TS15) shown in the model names means that they can support and operate under WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know the temperature in many places and countries of the world are lower than -10 degrees C, these two new models, ISW-621T and ISW-621TS15, will be the right products for Transportation, Manufacturing, Security and Surveillance network deployments in those harsh environments. The ISW-621T / ISW-621TS15 also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.   Flexibly Extendable Distance They(the ISW-621T and ISW-621TS15) each include four 10/100Base-TX auto-negotiation ports and two 100Base-FX ports. The ISW-621T is equipped with 100Base-FX multi-mode SC interfaces for transmission distance up to 2km while the ISW-621TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission distance up to 15km. The two 100Base-FX ports provide more flexibility for Transportation, Manufacturing, Security and Surveillance with distance extension without any limitation, making the ISW-621T / ISW-621TS15 suitable either for long distance (ISW-621TS15) or short distance (ISW-621T) network deployment.   Easy Installation and Wide Range of Power Usages The ISW-621T and ISW-621TS15 are designed with a compact case that allows either DIN rail or panel mounting for the efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-621TF
IP30 Slim 4-Port Industrial Ethernet + 2Port 100Base-FX SFP
Preis auf Anfrage
  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 2-port 100Base-FX SFP interface
Layer 2 Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1.2Gbps
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 1Mbit on-chip frame buffer
  • Automatic address learning and address aging
  • CSMA/CD Protocol
  • Industrial Case / Installation
  • IP30 metal case protection
  • DIN rail and wall mount design
  • 12 to 48V DC, redundant power with polarity reverse protection and connective removable terminal
  • block for master and slave power
  • Supports EFT protection 6KV DC for power line
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C wide operating temperature 
  Highly Convenient and Distance Extendable Industrial Robust Switch PLANET ISW-621TF is a new Industrial Ethernet Switch that can operate under WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C and is equipped with two 100Base-FX SFP slots. With two mini-GBIC 100Base-FX SFP (Small-Form Factor Pluggable) interfaces supported, the deployed distance of the ISW-621TF can be extended from 2 kilometers (via multi-mode fiber) up to above 60 kilometers (via single-mode fiber), respectively. In other words, the ISW-621TF provides more flexibility for Transportation, Manufacturing, Security and Surveillance with distance extension without any limitation and is a suitable model either for long or short distance network deployment.   Hardened Design The ISW-621TF can operate stably in harsh environment with wide operating temperature support. It also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.   Easy Installation and Wide Range of Power Usages The ISW-621TF is designed with a compact case that allows either DIN rail or panel mounting for the efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - ISW-621TS15
IP30 Slim Type 4-Port Industrial Ethernet Switch
Preis auf Anfrage
4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function for ISW-621T series • 2-port 100Base-FX interface on ISW-621T for up to 2km (multi-mode fiber 62.5/125μm, 50/125µm) transmission distance • 2-port 100Base-FX interface on ISW-621TS15 for up to 15km (single-mode fiber 9/125µm) transmission distance   Layer 2 Features • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard • Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port • High performance Store and Forward architecture • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Backplane (Switching Fabric): 1.2Gbps • Integrated address look-up engine, supporting 2K absolute MAC addresses • 1Mbit on-chip frame buffer • Automatic address learning and address aging • CSMA/CD Protocol   Industrial Case / Installation • IP30 metal case / protection • DIN rail and wall mount design • 12 to 48V DC, redundant power with polarity reverse protection and connective removable  terminal block for master and slave power • Supports EFT protection 6KV DC for power line • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C wide operating temperature   Highly Convenient and Feasible Industrial Robust Switch PLANET has upgraded two models named ISW-621T and ISW-621TS15 for use in environments with wide operating temperature. The capital ‘T’ (ISW-621T and ISW-621TS15) shown in the model names means that they can support and operate under WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know the temperature in many places and countries of the world are lower than -10 degrees C, these two new models, ISW-621T and ISW-621TS15, will be the right products for Transportation, Manufacturing, Security and Surveillance network deployments in those harsh environments. The ISW-621T / ISW-621TS15 also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.   Flexibly Extendable Distance They(the ISW-621T and ISW-621TS15) each include four 10/100Base-TX auto-negotiation ports and two 100Base-FX ports. The ISW-621T is equipped with 100Base-FX multi-mode SC interfaces for transmission distance up to 2km while the ISW-621TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission distance up to 15km. The two 100Base-FX ports provide more flexibility for Transportation, Manufacturing, Security and Surveillance with distance extension without any limitation, making the ISW-621T / ISW-621TS15 suitable either for long distance (ISW-621TS15) or short distance (ISW-621T) network deployment.   Easy Installation and Wide Range of Power Usages The ISW-621T and ISW-621TS15 are designed with a compact case that allows either DIN rail or panel mounting for the efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - IVC-2002
Ind. Ethernet Extender 4-Port 10/100Base + 1Port BNC / RJ11
Preis auf Anfrage
• Cost-effective VDSL2 Master / Slave bridge solution • -40 to 75 degrees C operating temperature • Redundant Power Design: 12~48V DC redundant power with polarity reverse protect function • IP-30 metal case protection • One box design, Master / Slave selectable via DIP Switch • Selectable BNC and RJ-11 mode for the data transmission • Defines Asymmetric (Band Plan 998) and Symmetric band plans for transmission of Upstream  and Downstream signals • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards • DMT (Discrete Multi-Tone) line coding • Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control • Supports up to 1536 bytes packet size, 802.1Q VLAN tag transparent • Integrated address look-up engine, supports 2K absolute MAC addresses • VDSL2 Standalone transceiver for simple bridge modem application • Selectable Target Band Plan and Target SNR Margin • Supports extensive LED indicators for network diagnostics • DIN rail and wall mount design   Ideal integration of Industrial Ethernet Extender To fulfill the market demand, PLANET has released one amazing product named IVC-2002. The IVC-2002 is positioned as an Industrial Ethernet Extender. It has a switching architecture with 4 RJ-45 10/100Mbps Ethernet ports and one asymmetric or symmetric Ethernet over VDSL port – the VDSL port can be RJ-11 or BNC connector. Customers can use either BNC or RJ-11 for their network deployment and it offers the absolutely fastest data transmission speed over existing coaxial cable and telephone wire without the need of rewiring. Furthermore, the IVC-2002 is also compatible with PLANET VC-201A and VC-202A. Without spending extra cost, users can easily re-deploy a new local Internet in the apartment, hotel, campus and hospitality environment by applying the IVC-2002 on the original network structure.   Environmentally Hardened Design for Industrial Networks The IVC-2002 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments like plant floors or in curb side traffic control cabinets. The Industrial Ethernet Extender can operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location. The IVC-2002 is packaged in a compact, IP-30 metal case that allows either DIN or panel mounting for efficient use of cabinet space. The Extender provides an integrated power supply with a wide range of voltages (12 ~ 48V DC) for worldwide operability or for dual-redundant, reversible polarity, 12 ~ 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   Efficient Usage, Cost Effectiveness and Great Performance The Ethernet over VDSL2 combines the Ethernet and VDSL technology to transmit the Ethernet format data by using VDSL signaling over the existing coaxial cable and telephone wire. Therefore, it is ideal for deploying network by using the existing coaxial cable and telephone wire to transmit data to the Internet at a minimum cost. The IVC-2002 can be adjusted to Master or Slave mode via a DIP switch. When the IVC-2002 (RJ-11) is connected with the other IVC-2002 device, the performance will be up to 99/63Mbps for asymmetric data rate within 200m and up to 28/2Mbps for asymmetric data rate at 1.4km. The IVC-2002 (BNC) performance is up to 99/65Mbps for asymmetric data rate within 200m and up to 31/4Mbps for asymmetric data rate at 2.4km. This capability is ideal for use as an Ethernet extender for your existing Ethernet network.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Ubiquiti - N-SW
NanoSwitch, Outdoor 4-Port Gigabit Switch, PoE passthrough
Preis auf Anfrage
  • 1x Gigabit, 24V passiver PoE im Port
  • 3x Gigabit, 24V passiver PoE-Ausgang
  • wetterfestes  Outdoor Gehäuse
  Wir stellen den Ubiquiti Networks® NanoSwitch ™ vor, einen unmanaged Switch mit vier Gigabit-Ethernet-Ports. Für seine gesamte non-blocking Linerate unterstützt der NanoSwitch bis zu 4 Gbit/s.   Mit einem langlebigen, wetterfesten Gehäuse ist der NanoSwitch ideal für den Einsatz im Freien. Für eine schnelle Installation kann der kompakte NanoSwitch einfach an einem Mast oder an einer Wand montiert werden.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Seite /