• 1 x 10/100 Mbit/s HiPoE-Anschluss
• 7 x 10/100 Mbit/s PoE-Ports
• 2 x 10/100/1000 Mbit/s RJ45-Anschlüsse.
• IEEE 802.3at/af/bt-Standard für HiPoE-Port (max. 60 W Portleistung).
• IEEE 802.3at/af für PoE-Ports.
• IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab und IEEE 802.3z.
• PoE-Port mit 6 KV Überspannungsschutz.
• Die AF / AT-Kamera kann im Ausfahrmodus bis zu 250 m erreichen. HiPoE-Kamera kann bis zu 150 m erreichen.
• PoE-Ausgangsleistungsverwaltung.
• Dual-Uplink-Netzwerkdesign.
• Drahtgeschwindigkeits-Weiterleitung und blockierungsfreies Design.
• Store-and-Forward-Umschaltung.
• Solide hochfeste Metallhülle.
• Lüfterloses Design mit hoher Zuverlässigkeit.

  DS-3E0310HP-E-Switches sind Layer-2-PoE-Switches mit einer Reichweite von 100 Mbit/s, die 1 x 10/100 Mbit/s-HiPoE-Port, 7 x 10/100 Mbit/s-PoE-Ports und 2 x 10/100/1000 Mbit/s-RJ45-Ports bieten. Die Switches bieten fortschrittliche HiPoE/PoE-Technologie und unterstützen den Extend-Modus mit einer Reichweite von bis zu 250 m. In der Zwischenzeit garantieren die 2 x 10/100/1000 Mbps RJ45-Uplink-Ports den Einsatz mehrerer Netzwerklösungen.
Anwendung:
8-Port 100 Mbps Long-Range PoE Switch, IEEE 802.3af/at/bt, 110W

• 12 x Gigabit PoE-Ports
• 4 x Gigabit Hi-PoE-Ports
• 2 x Gigabit RJ45 Ports
• 2 x Gigabit Glasfaseranschlüsse.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Ports (max. 90 W PoE-Ausgang).
• IEEE 802.3at/af-Standard für PoE-Ports (max. 30 W PoE-Ausgang).
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab und IEEE 802.3z.
• 6-kV-Überspannungsschutz für PoE-Ports.
• Bis zu 300 m Fernübertragung.
• PoE-Watchdog zum automatischen Erkennen und Neustarten von Kameras, die nicht reagieren.
• Portisolation zur Verbesserung der Netzwerksicherheit.
• Gigabit-Netzwerkzugriffsdesign.
• Weiterleitung mit Drahtgeschwindigkeit.
• Store-and-Forward-Umschaltung.
• Massive hochfeste Metallgehäuse

  DS-3E0520HP-E-Switches sind Layer-2-Hi-PoE-Switches, die fortschrittliche PoE-Stromversorgungstechnologie und Gigabit-Netzwerkdesign auf der Basis eines Hochleistungszugriffs bieten, um einen stabilen Daten-Upload zu gewährleisten. Die Switches unterstützen Hi-PoE, Fernbereich, Portisolation und PoE-Watchdog-Funktion.

• 8x 10/100Mbps PoE-Ports
• 2x Gigabit RJ45 Port
• IEEE 802.3at/af-Standard für PoE-Ports (max. 60 W PoE-Ausgang)
• Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z und IEEE 802.3ab
• 6-kV-Überspannungsschutz für PoE-Ports
• Bis zu 300 m Long-Range-Distanz
• Wire-Speed Forwarding
• Store-and-Forward-Switching
• Massive hochfeste Metallgehäuse
• Zuverlässiges lüfterfreies Design

  DS-3E0310P-E/M-Switches sind unmanaged Layer2 PoE-Switches und bieten fortschrittliche PoE-Stromversorgungstechnologie auf der Grundlage eines Hochleistungszugriffs, um einen stabilen Daten-Upload zu gewährleisten. Die Switche unterstützen die Long-Range-Funktion.

• 8-port 10/100BASE-TX Fast Ethernet RJ45 copper
• 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces
• unmanaged

  Power over Ethernet

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Each port supports 53V DC power to PoE Powered Device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m with standard mode

  Switching

• Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 4K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging

  Hardware

• 12-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• LCD monitor for system status and PoE usage status display
• 1 silent fan to provide stable and efficient power performance
• Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
• Supports ±4KV Surge Immunity

   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSD-1022VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSD-1022VHP is equipped with 8 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 120 watts and non-blocking data switching performance, the FGSD-1022VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSD-1022VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSD-1022VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and Ethernet Data Transmit Distance Extension The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. The FGSD-1022VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode.   The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.   In the “Extend” operation mode, the FGSD-1022VHP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSD-1022VHP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Furthermore, its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.    Flexible and Extendable Two Gigabit Uplink Solution The FGSD-1022VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for IP surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSD-1022VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.   Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSD-1022VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSD-1022VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

• 16x 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector function (ports 1~16)
• 2x 10/100/1000BASE-T Gigabit RJ45 ports interfaces (ports 17~18)
• 1x 1000BASE-X SFP interface (port 17)

Power over Ethernet:

• Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
• Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1~16)
• Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W
• Each port supports 55 DC power to PoE powered device
• Auto detects powered device (PD)
• Supports PD alive function
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode with 250m in extend mode 

Switching:

• Hardware-based 10/100Mbps and 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Supports IEEE802.3x flow control in full-duplex mode and backpressure in half-duplex mode
• Integrates address look-up engine, supporting 16K absolute MAC addresses
• 16K jumbo frame supports 1000Mbps speed
• Hardware-based DIP switch for Standard, VLAN or Extend mode selection
  
  • VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP port 17
  • Extend mode: Ports 1 to 8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other
• VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) 

Hardware:

• 11-inch desktop size, 1U height
• LED indicators for system power, per port PoE ready and PoE activity, speed, link/act
• 1 silent fan to provide stable and efficient power performance
• Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection
• Supports ±6KV surge immunity

Cost-optimized, Multi-mode Ethernet Switch for PoE Networking:
To facilitate 32W PoE power network applications with the transmission, PLANET FGSD-1821P is equipped with 16 10/100BASE-TX Fast Ethernet ports, 2 extra Gigabit TP ports and 1 1000BASE-X SFP combo interface ideally suitable for centralized power management. With a total of 185 watts of PoE budget, it features high-performance Gigabit uplink and IEEE 802.3at PoE+ (up to 32W) capabilities. Two Gigabit Uplink Ports:
The FGSD-1821P provides two extra Gigabit TP ports and one 1000BASE-X SFP combo interface  that enable the network administrators to increase their network bandwidth to relieve traffic congestion when the two 10/100/1000BASE-T or one 1000BASE-X uplink port are used to connect devices, such as NVR, video streaming server, NAS and more. With the combo design, the administrators can easily connect network devices no matter how large the network expansion is. Perfect Integrated Solution for PoE IP Surveillance:
The FGSD-1821P brings you an ideally secure surveillance system at a lower total cost. The FGSD-1821P provides 16 10/100Mbps 802.3at PoE+ ports able to feed sufficient PoE power to 16 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites. Ethernet Data Transmission Distance Extension:
The DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. 

• The FGSD-1821P operates as a normal IEEE 802.3at PoE+ switch in the “Standard” operation mode. 
• The “VLAN” operation mode features port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
• In the “Extend” operation mode, the FGSD-1821P operates on a per-port basis at 10Mbps duplex operation but supports 20-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.  

With this brand-new feature, the FGSD-1821P provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation. Powered Device Alive Check:
The FGSD-1821P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status. The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. Flexible Extension Solution:
The two mini-GBIC slots built in the FGSD-1821P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

• 16-port 10/100BASE-TX Fast Ethernet RJ45 copper
• 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces

  Power over Ethernet

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Each port supports 54V DC power to PoE Powered Device
• 300-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m with standard mode

  Switching

• Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 4K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging

  Hardware

• 19-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• LCD monitor for system status and PoE usage status display
• 2 silent fans to provide stable and efficient power performance
• Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
• Supports ±4KV Surge Immunity

    Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-1822VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-1822VHP is equipped with 16 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-1822VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-1822VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-1822VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-1822VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-1822VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-1822VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-1822VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-1822VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

• 24-port 10/100BASE-TX Fast Ethernet RJ45 copper
• 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces

  Power over Ethernet

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 24 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Each port supports 54V DC power to PoE Powered Device
• 300-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m with standard mode

  Switching

• Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 4K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Automatic address learning and address aging

  Hardware

• 19-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• LCD monitor for system status and PoE usage status display
• 2 silent fans to provide stable and efficient power performance
• Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
• Supports ±4KV Surge Immunity

   Cost-effective Integration Solution for Secure IP Surveillance Infrastructure PLANET FGSW-2622VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.   The FGSW-2622VHP is equipped with 24 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-2622VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.    LCD Monitor for Real-time PoE Usage and System Status Display The LCD monitor of the FGSW-2622VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-2622VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.    802.3at PoE+ Power and VLAN Isolation Operation Mode The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-2622VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.    Flexible and Extendable Two Gigabit Uplink Solution The FGSW-2622VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.   Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.    Robust Protection The FGSW-2622VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.    Easy Installation and Cable Connection As data transfer and high power PoE are transmitted over a cable, the FGSW-2622VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-2622VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

• 8x 10/100/1000BASE-T with 72W PoE injector
• 2x 1/10G BASE-X SFP+
• RS-232 RJ45 console interface for switch basic management and setup

  Power over Ethernet:

• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 72 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
• PoE Port Status monitoring
• Total PoE power budget control
• Over Temperature Protection
• PoE usage threshold- Temperature threshold
• Per port PoE function enable/disable
• PoE Port Power feeding priority
• Per PoE port power limit
• PD classification detection
• Sequence port PoE

  Layer 2 Features:

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
• Broadcast/Multicast/Unknown unicast
• Supports VLAN
• IEEE 802.1Q tagged VLAN
• Up to 255 VLANs groups, out of 4094 VLAN Ids
• Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
• Private VLAN Edge (PVE)
• Protocol-based VLAN
• MAC-based VLAN
• Voice VLAN
•  GVRP
• Supports Spanning Tree Protocol
• STP, IEEE 802.1D Spanning Tree Protocol
• RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
• MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
• BPDU Guard
• Supports Link Aggregation
• 802.3ad Link Aggregation Control Protocol (LACP)
• Cisco ether-channel (static trunk)
• Maximum 6 trunk groups, up to 4 ports per trunk group
• Up to 44Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)

  Layer 3 IP Routing Features:

• Supports maximum 128 static routes and route summarization

  Quality of Service:

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
• IEEE 802.1p CoS
• TOS/DSCP/IP Precedence of IPv4/IPv6 packets
• IP TCP/UDP port number
• Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

  Multicast:

• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• Multicast VLAN Registration (MVR) support

  Security:

• Authentication
• IEEE 802.1x Port-based/MAC-based network access authentication
• Built-in RADIUS client to co-operate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• Access Control List
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder

  Management:

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Console/Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c, and v3 switch management
• SSH/SSL secure accessIPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP/TFTP
• Reset button for system reboot or reset to factory default
• Dual Images
• DHCP Relay
• DHCP Option82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
• ICMPv6/ICMPv4 Remote Ping
• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Linkup and Linkdown notification
• System Log
• PLANET Smart Discovery Utility for deployment management

• 8x 10/100/1000BASE-T Gigabit RJ45 copper
• 2x 1000BASE-X mini-GBIC SFP interfaces
• 2x 10/100/1000BASE-T TP interfaces

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 32 watts for each PoE port
• Each port supports 54V DC power to PoE powered device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode and 250m in extend mode

  Smart LCD:

• The LCD switch features “Standard”, “VLAN” and  “Extend”  mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• The LCD switch is able to isolate ports to prevent broadcast storm and defend DHCP spoofing
• Power low-voltage, power over-voltage and PSE over-temperature protection
• Screen saver, fan control, factory default and save configuration
• PoE management
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limitation
• PD alive check

  Switching:

• Hardware-based  10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• 9216bytes packet size
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging

  Hardware:

• 12-inch desktop size, 1U height, rack mountable
• 2-inch color LCD with smart management functions
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• 1 silent fan to provide stable and efficient power performance
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
• Supports contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection
• Supports ±6KV surge immunity

• 16-port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ injector function
• 2 10/100/1000BASE-T Gigabit RJ45 copper interfaces
• 2 1000BASE-X SFP interfaces 
   
  Power over Ethernet:
  Complies with IEEE 802.3at Power over Ethernet end-span PSE
  Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1~16)
  Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W.
  Each port supports 54V DC power to PoE powered device
  Auto detects powered device (PD)
  Supports PD alive function
  Circuit protection prevents power interference between ports
  Remote power feeding up to 100m in standard mode with 250m in extend mode
   
  Switching:
  Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  Supports IEEE 802.3x flow control in full-duplex mode and backpressure in half-duplex mode
  Integrates address look-up engine, supporting 8K absolute MAC addresses
  9K jumbo frame supports all speeds (10/100/1000Mbps)
  Hardware DIP switch for Standard, VLAN and Extend mode selection; 
  VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP ports 19 to 20
  Extend mode: Ports1 to 8 have data rate of 10Mbps. The farthest transmission distance of up to 250 meters and all ports can communicate with each other.
  VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
  Automatic address learning and address aging
  Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
   
  Hardware:
  12-inch desktop size, 1U height
  LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  1 silent fan to provide stable and efficient power performance
  Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection 
  Supports ±6KV surge immunity 

• 8 10/100BASE-TX Fast Ethernet RJ45-Ports mit IEEE 802.3at/af PoE+ Injector (Port-1 bis Port-8)
• 2 10/100/1000BASE-T Gigabit Ethernet RJ45-Ports (Port-9 und Port-10)
• 2 1000BASE-X Mini-GBIC/SFP-Slots mit automatischer SFP-Erkennung (Port-9 und Port-10)

  Power over Ethernet:

• Entspricht IEEE 802.3at Power over Ethernet Plus, PSA mit Endbereich
• Rückwärtskompatibel mit IEEE 802.3af Power over Ethernet
• Bis zu 8 Ports von IEEE 802.3af/802.3at Geräten versorgt
• 240-Watt-PoE-Budget
• Unterstützt PoE Power bis zu 30 Watt für jeden PoE Port
• Automatische Erkennung der PoE Geräte (PD)
• Der Schaltungsschutz verhindert Stromstörungen zwischen den Ports
• Fernspeisung bis zu 100 Meter

  Industrie Gehäuse und Installation:

• IP30 Metallgehäuse
• DIN-Schiene und Wandhalterung
• 48 ~ 56V DC, redundante Stromversorgung mit Polaritätsumkehrschutzfunktion
• Unterstützt 6000 V DC Ethernet ESD-Schutz
• -40 bis 75 Grad C Betriebstemperatur

  Switching:

• Hardwarebasierte 10/100Mbps (Halb-/Vollduplex), 1000Mbps (Vollduplex), Auto-Negotiation und Auto-MDI / MDI-X
• Verfügt über Store-and-Forward-Modus mit Wire-Speed-Filter- und Weiterleitungsraten
• IEEE 802.3x Flow-Control für Full-duplexbetrieb und Back Pressure für Half-duplexbetrieb
• 16K MAC-Adresstabelle
• 10K Jumbo Frame
• IEEE 802.1Q VLAN-Transparenz
• Hardware-DIP-Schalter für "Standard" und "Extend" Modusauswahl
• Der "Extend" -Modus bietet eine 30-Watt-PoE-Übertragungsdistanz von 250m bei einer Geschwindigkeit von 10 Mbit/s
• Automatisches Adresslernen und Adressaltern
• Unterstützt CSMA / CD-Protokoll

   

• 6x 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
• 2x SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver in dual modes 

Power over Ethernet:

• Complies with IEEE 802.3bt Power over Ethernet Plus Plus type 4 PSE
• Backward compatible with IEEE 802.3at Power over Ethernet Plus
• Up to 4 ports of IEEE 802.3bt/at devices powered
• Up to 240-watt PoE budget
• Supports PoE power up to 95 watts for each PoE port
• Each port supports 48~54V DC power to PoE powered device
• Auto detects powered device (PD)
• Auto detects IEEE 802.3bt equipment and protects devices from being damaged by incorrect installation
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m 

Industrial hardened design:

• IP30 aluminum case
• DIN-rail and wall-mount designs
• 48~54V DC redundant power with reverse polarity protection
• Fault alarm for power input failed
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature 
• 4 real-time PoE power usage indicators 

Layer 2 Switching:

• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 4K MAC address table size
• 9K jumbo frame
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Outstanding 802.3bt PoE++ Solution for Hardened Environment:
Featuring Plug and Play designed to be installed in heavy industrial demanding environments, the IGS-824UPT is a PLANET Industrial-grade, DIN-rail type Unmanaged Gigabit Ethernet Switch with four 10/100/1000BASE-T ports featuring IEEE 802.3bt Power over Ethernet Plus Plus (PoE++) injector function to deliver up to 95 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its two 100/1000BASE-X SFP fiber optic uplink ports provide long distance, high speed and stable data transmission to a remote core network. The IGS-824UPT is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 240 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing. 802.3bt PoE++ – 90~95-watt Power over 4-pair UTP Solution:
As the IGS-824UPT adopts the IEEE 802.bt PoE++ standard and PoH technology, it is capable to source up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). It possesses triple amount of power capability than the conventional 802.3at PoE+ and is an ideal solution to satisfy the growing demand for higher power consuming network PDs, such as:

• PoE PTZ speed dome cameras
• Thin clients
• AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks
• Remote digital signage displays
• PoE lightings 

Intelligent LED Indicator for Real-time PoE Usage:
The IGS-824UPT helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indicator. On the front panel of the Industrial Gigabit PoE++ Switch, there are three different power usage LED indicators indicating 80W, 160W and 240W.  Fiber Optic Link Capability for Flexible Distance Extension:
The additional two mini-GBIC slots built in the IGS-824UPT support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (small form-factor pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and monitoring center in long distance. Dual Power Input for High Availability Network System:
The IGS-824UPT features a strong dual power input system with 48~54V DC to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-824UPT via power supply 2 alternatively without any loss of operation. Environmentally Hardened Design:
With the IP30 metal industrial case, the IGS-824UPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-824UPT can be placed in almost any difficult environment. Robust Protection:
The IGS-824UPT provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.