• 1 × 10/100 Mbps Hi-PoE-Anschluss, 3 × 10/100 Mbps PoE-Anschlüsse und 2 × 10/100 Mbps RJ45-Anschlüsse.
• IEEE 802.3at/af/bt-Standard für Hi-PoE-Port (max. 60 W Portleistung).
• IEEE 802.3at/af-Standard für PoE-Ports.
• IEEE 802.3, IEEE 802.3u und IEEE 802.3x Standard.
• 6 KV-Überspannungsschutz für PoE-Ports.
• AF/AT-Kameras können im Extend Mode bis zu 250 m erreichen. Hi-PoE-Kameras können bis zu 150 m erreichen.
• High priority ports.
• PoE-Energieverwaltung.
• Dual-Uplink-Netzwerkdesign.
• Wire-Speed Forwardung und Non-Blocking-Design.
• Store-and-Forward-Switching.
• Solide hochfestes Metallgehäuse.
• Lüfterloses Design

  DS-3E0106HP-E-Switches sind Layer-2-PoE-Switches mit 100 Mbit/s und langer Reichweite. Sie bieten einen Hi-PoE-Port mit 1 × 10/100 Mbit/s, PoE-Ports mit 3 × 10/100 Mbit/s und RJ45-Ports mit 2 × 10/100 Mbit/s. Die Switches bieten fortschrittliche Hi-PoE / PoE-Technologie und unterstützen den Extend Mode mit einer Reichweite von bis zu 250 m. Die vorherige und stabile Übertragung der wichtigen Überwachungsbereichsvideos kann auch bei Anschluss an die Ports mit hoher Priorität garantiert werden. In der Zwischenzeit garantieren die RJ45-Uplink-Ports mit 2 × 10/100 Mbit/s den Einsatz mehrerer Netzwerklösungen.
Anwendung:
4-Port 100 Mbps Long-Range PoE Switch, IEEE 802.3af/at/bt, 60W

• 10x 10/100BASE-TX Fast Ethernet RJ45 copper
• 8x IEEE 802.3at PoE+ Injector (Port-1 to Port-8)

  Power over Ethernet:

• Complies with IEEE 802.3at Power+ over Ethernet end-span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30.8 watts for each PoE port
• Each port supports 55V DC power to PoE powered device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in standard mode with 250m in extend mode

  Switching:

• Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8)
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

  Hardware:

• 9-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
• Fanless design
• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

• 6x 10/100Mbps Fast Ethernet ports
• 4x ports supporting 52V DC power to PoE powered device

  Power over Ethernet:

• Complies with IEEE 802.3af/at Power over Ethernet end-span
• Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port
• 60-watt PoE budget
• Hardware DIP switch for "Standard" and "Extend" mode selection; the "Extend" mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in the standard mode

  Switching:

• Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• 1536bytes packet size
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• Automatic address learning and address aging
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

  Hardware:

• Desktop palm size
• LED indicators for PoE ready/activity and LINK/ACT
• Supports contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection
• Supports ±4KV surge immunity
• Internal AC power supply