• ITU-T G.993.5 G.Vectoring and G.INP
• Upstream/Downstream bandwidth up to 200/100Mbps
• CO/CPE mode selectable via DIP switch
• Selectable target band plan and SNR margin
• Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
• One BNC connector for VDSL connection
• Uses existing RG59/RG6 coaxial cable
• Used in pairs to extend Point-to-Point connection up to 1.4km
• Supports a packet size of up to 1522 bytes, IEEE 802.1Q VLAN tag transparency
• Advantage of minimum installation time (Simply by Plug-and-Play)
• Supports extensive LED indicators for network diagnosis
• Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
• Compact in size and easy to install

High Performance Gigabit Ethernet over Coaxial Solution: To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission: The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2).  The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes --  asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals.

• Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
• Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps

The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables: The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications:

• Long-distance IP network devices
• IP digital signage
• Cable TV to IPTV
• Distance video education
• Electronic billboards
• Other applications

If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation: The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.

• Complies with IEEE 802.3, IEEE 802.3u 10 / 100Base-TX and 100Base-FX
• IEEE 802.3x full-duplex flow-control, back-pressure in Half-duplex eliminate packet loss
• TS-1000 / OAM function built-in, the device can be remotely monitored with port link status
• Dual 100Base-FX SFP fiber optic
• One 10 / 100Base-TX copper
• Auto-negotiation for 100Base-TX half-duplex or 100Base-T full-duplex
• Supports auto MDI / MDI-X function
• Supports maximum frame size up to 2046Kbytes
• Link status auto-detect and redundant on dual ports with the same connector type
• Only primary port is active at a time, the backup port is blocked
• While primary port link fail occurrences, the traffic will swap to backup port automatically
• Once the primary port status is back to linkup, the traffic will swap from backup port to primary port
• Hardware redundant swaps less than 10 ms

  PLANET FT-1205A is a 3-port Redundant Media Converter which supports conversion between 10 / 100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter. It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecoms, hospitals, banks and enterprises.   Via the built-in DIP switches, the converter can be configured as 3-port Ethernet switch or 2-port redundant media converter. With the 3-port switch mode, it can operate Store-and-Forward mechanism with high performance, and it can also prevent packet loss via IEEE 802.3x flow control (full-duplex) and back pressure (half-duplex).   With the 2-port redundant mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.   The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The FT-1205A is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. It depends on the 100Base-FX SFP transceiver modules. The Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively.   The converters can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700, MC-1500, MC-1500R and MC-1500R48. As to the other PLANET media converters (FT series), they're hot swappable in MC chassis.

• 1x 1000BASE-X SFP interface
• 1x RJ11 connector for xDSL port with VDSL2 connection

VDSL2 Features:

• VDSL2 stand-alone transceiver for simple bridge modem application
• Cost-effective bridge function to connect two Ethernet LANs
• Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
• Voice and data communication can be shared simultaneously based on the existing telephone wire with distance up to 1.4km
• ITU-T G.993.2 VDSL2 standard
• ITU-T G.993.5 G.Vectoring and G.INP
• DMT-based coding technology 
• CO/CPE mode selectable via DIP switch
• Selectable target band plan (symmetric and asymmetric) and SNR margin
• Supports IEEE 802.1Q VLAN tag transparency

Hardware and Installation:

• Compact size, wall-mountable design; ideal solution for space-limited locations
• Advantage of minimum installation time (Simply by Plug and Play)
• Metal case, good for heat sinking
• Supports extensive LED indicators for network diagnosis
• Additional POST splitter to share voice and data
• Supports 6KV DC Ethernet ESD protection

High Performance Gigabit Ethernet over Coaxial Solution: To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission: The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2).  The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes --  asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals.

• Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
• Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps

The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables: The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications:

• Long-distance IP network devices
• IP digital signage
• Cable TV to IPTV
• Distance video education
• Electronic billboards
• Other applications

If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation: The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature 　–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 　–Supports auto MDI/MDI-X function 　–Store-and-Forward mechanism 　–Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: 　–Multi-mode fiber using SC/LC/WDM connector; 　–Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base 　SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
• Layer 2 key features
  
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
  • Supports auto MDI/MDI-X function 
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate 
• Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
• Fiber media allows
  
  • Multi-mode fiber using SC/LC/WDM connector
  • Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable/Enable) setting
• 9K jumbo frame supported
• Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
• Compact in size, easy installation

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature 　–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 　–Supports auto MDI/MDI-X function 　–Store-and-Forward mechanism 　–Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: 　–Multi-mode fiber using SC/LC/WDM connector; 　–Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base 　SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate   • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector   • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets
• One fiber-optic, 1310nm wavelength, connector type and distance vary with model
• FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
• FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
• TP: 10/100Mbps
• FX: 100Mbps
• Duplex mode support:
• Full or half-duplex mode by auto-negotiation (TP)
• Full or half-duplex mode by DIP switch (FX)
• DIP switch: 2 DIP switches
• Rear DIP switch: FX duplex mode selection
• Side DIP switch: LFP (Link Fault Pass-through) mode selection

  PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and 100BASE-FX Ethernet standards
• One 10/100BASE-TX port with RJ45 connector
• One 100BASE-FX port with ST/SC/WDM connector supporting multi-mode or single-mode fiber optic cable
• Auto-negotiation and auto-MDI / MDI-X for 10/100BASE-TX port
• Back-pressure and IEEE 802.3x compliant flow control and full wire-speed forwarding rate
• Link Loss Return (LLR) switch on each fiber optic is to aid in troubleshooting remote network connections
• Link Loss Carry Forward (LLCF) works with LLR in diagnosing network connections

  Distance Extended with Fiber Optic Cable PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.    Enhanced Smart Management Features The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.    Easy Installation The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  

• Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX
• Copper RJ45 interface with Data + Power output
• Copper port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X.
• Fiber media allows
  
  • Multi-mode fiber using LC connector
  • Single-mode fiber using LC connector

Power over Ethernet:

• Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
• Backward Compatible with IEEE 802.3at Power over Ethernet plus end-span/mid-span PSE
• Provides DC 52V~55V power over RJ45 Ethernet cable to devices with Ethernet port
• RJ45 PoE++ port with built-in 802.3bt type-4 PoE 95W injector function
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• IEEE 802.3bt/IEEE 802.3at splitter devices compatibility

Layer 2 Features:

• Store-and-Forward mechanism
• Non-blocking full wire-speed forwarding rate
• IEEE 802.1Q Tag VLAN transparent, multicast pass through
• 9K jumbo frame 
• IEEE 802.3x full-duplex and half-duplex back-pressure flow control to eliminate the loss of packets 

Mechanical:

• Metal case
• LED indicators for easy network diagnostics
• DIP switch for PoE power feeding options (BT/UPOE/Legacy) selection
• DC 52V~55V power input socket
• Wall mounting or DIN-rail installation (optional)
• Compact in size, easy installation

Application:
Flexible and User-friendly PoE Deployment with Gigabit SFP Fiber Extension:
For the places difficult to find the power outlet, the GUP-805A-60W provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network devices that need higher power to function normally. For instance, users can flexibly install security IP camera, wireless access point and other IEEE 802.3bt/at/af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs. Gigabit 802.3bt PoE++ and PoE+ Network Deployment Solution:
PLANET GUP-805A-60W can easily build an 802.3BT PoE++ networking solution for the enterprises. For instance, they can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GUP-805A-60W and 802.3bt PoE++ Splitter-POE-173S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. Receiving data and power from the GUP-805A-60W, the POE-173S separates digital data and power into three optional outputs (12V, 19V or 24V DC) to non-PoE devices such as laptops, Thin Client, POS System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. 

• Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX
• Copper RJ45 interface with Data + Power output
• Copper port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X.
• Fiber media allows
  
  • Multi-mode fiber using LC connector
  • Single-mode fiber using LC connector

Power over Ethernet:

• Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
• Backward Compatible with IEEE 802.3at Power over Ethernet plus end-span/mid-span PSE
• Provides DC 52V~55V power over RJ45 Ethernet cable to devices with Ethernet port
• RJ45 PoE++ port with built-in 802.3bt type-4 PoE 95W injector function
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• IEEE 802.3bt/IEEE 802.3at splitter devices compatibility

Layer 2 Features:

• Store-and-Forward mechanism
• Non-blocking full wire-speed forwarding rate
• IEEE 802.1Q Tag VLAN transparent, multicast pass through
• 9K jumbo frame 
• IEEE 802.3x full-duplex and half-duplex back-pressure flow control to eliminate the loss of packets 

Mechanical:

• Metal case
• LED indicators for easy network diagnostics
• DIP switch for PoE power feeding options (BT/UPOE/Legacy) selection
• DC 52V~55V power input socket
• Wall mounting or DIN-rail installation (optional)
• Compact in size, easy installation

Application:
Flexible and User-friendly PoE Deployment with Gigabit SFP Fiber Extension:
For the places difficult to find the power outlet, the GUP-805A-95W provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network devices that need higher power to function normally. For instance, users can flexibly install security IP camera, wireless access point and other IEEE 802.3bt/at/af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs. Gigabit 802.3bt PoE++ and PoE+ Network Deployment Solution:
PLANET GUP-805A-95W can easily build an 802.3BT PoE++ networking solution for the enterprises. For instance, they can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GUP-805A-95W and 802.3bt PoE++ Splitter-POE-173S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. Receiving data and power from the GUP-805A-95W, the POE-173S separates digital data and power into three optional outputs (12V, 19V or 24V DC) to non-PoE devices such as laptops, Thin Client, POS System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. 

Standard

• Complies with IEEE 802.3 10Base-T
• Complies with IEEE 802.3u 100Base-TX
• Complies with IEEE 802.3ab 1000Base-T
• Complies with IEEE 802.3z 1000Base-SX / LX
• IEEE 802.3x Full-duplex Flow-Control, Back-Pressure in Half-duplex eliminate packets loss

  Interface

• Dual 1000Base-SX / LX SFP Fiber-Optic Slots
• One 10/100/1000Base-T Copper, auto MDI/MDIX function
• Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, Full-duplex for 1000Mbps
• Supports maximum frame size up to 1522 bytes
• IEEE 802.1Q Tag VLAN Transparent, Multicast pass-through

  Redundancy

• Link status auto-detecting and redundant on Dual ports with the same connector type
• Allows only the Primary-Port or the Backup-Port active at a time

- When the Primary-Port link fail occurs, the traffic swaps to Backup-Port automatically - Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port

• Hardware fiber port redundant

  Mechanical

• External 5V / 2A DC power supply
• LED indicators for easy network diagnose
• DIP switch for 3-port operation with Gigabit switch mode or redundant mode
• Compact in size, easy installation
• Co-works with PLANET 10”/19” Media Converter Chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
• Wall mounting and DIN-Rail installation supported

  PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit SFP slots, strengthened redundant function, and other features shown below:

• DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode
• Hardware Fiber Port Redundant

  Highly Convenient and Distance Extendable The GT-1205A is equipped with one 10/100/1000Base-T port and dual Gigabit SFP slots to support conversion between 10/100/1000Base-T and 1000Base-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m, 10km or longer, depending on the optional 1000Base-SX / LX SFP transceiver modules.      Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port Redundant Media converter. With the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.    Easy Deployment Standalone or with Chassis The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function.   Plug & Play Installation As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature.

• Lightwin Fast Ethernet Multimode Konverter
• Spezielle Lichtquelle mit langer Lebensdauer
• Externes Netzteil im Lieferumfang
• Kompatibel mit Lightwin Chassis
• Übertragung: Multimode

• Datenrate: 100Mb/s
• Wellenlänge: 1310nm
• Distanz: 550m
• Anschlüsse: 1x Duplex SC, 1x RJ45
• Modus: Dual Fiber

Lightwin High Quality Multimode Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit der speziell ausgewählten Lichtquelle durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.  

• Lightwin Fast Ethernet Multimode Konverter
• Spezielle Lichtquelle mit langer Lebensdauer
• Externes Netzteil im Lieferumfang
• Kompatibel mit Lightwin Chassis

 

• Übertragung: Multimode
• Datenrate: 100Mb/s
• Wellenlänge: 850nm
• Distanz: 550m
• Anschlüsse: 1x Duplex ST, 1x RJ45
• Modus: Dual Fiber

  Lightwin High Quality Multimode Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit der speziell ausgewählten Lichtquelle durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.

• Fast Ethernet Übertragung über eine Faser
• Spezieller Chip eingebaut
• Spezieller Laser mit langer Lebensdauer
• Externes Netzteil im Lieferumfang
• Kompatibel mit Lightwin Chassis
• Übertragung: Singlemode

• Datenrate: 100Mb/s
• Wellenlänge: 1310nm
• Distanz: 20km
• Anschlüsse: 1x Simplex SC, 1x RJ45
• Modus: Singlefiber, WDM

Lightwin High Quality Singlemode WDM Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit dem speziell ausgewählten Laser durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.

• Glasfaser zu Kupfer Konverter für POE-Geräte im Freien
• Zuverlässige Langstrecken-Gigabit-PoE Verbindung
• Verbesserter ESD-Schutz und Reduzierung von elektromagnetischen Interferenzen
• Zuverlässige 24V/50V-Passiv-PoE-Leitungen

  Fiber + Power-Lösung für PoE-Geräte im Freien: Überwindung der PoE-Einschränkungen mit dem FiberPoE™ der nächsten Generation, Modell F-POE-G2. Der FiberPoE Gen2 ist eine kostengünstige Lösung für Außeneinsätze, bei denen lange Strecken erforderlich sind, um das PoE-Gerät zu erreichen. Implementierungen mit FiberPoE Gen2 bieten einen erheblichen EMI- und ESD-Schutz gegenüber typischen PoE-Installationen. Der FiberPoE Gen2 verfügt außerdem über einen robusten, wetterfesten Formfaktor und einen verbesserten Überspannungsschutz.   Getrennter Daten- und Stromleitungen: PoE ist ideal für Installationen in Innenräumen oder für kurze Wege. Bei Installationen im Außenbereich über große Entfernungen ist PoE jedoch anfällig für elektromagnetische Interferenzen und ist auf 100 Meter bei entsprechendem Leistungsverlust begrenzt. Mit dem FiberPoE Gen2 werden Daten und Strom auf separaten Kabeln transportiert, um die Datenintegrität erheblich zu verbessern und wesentlich längere Kabelwege zu ermöglichen. Der FiberPoE Gen 2 bietet bidirektionalen Gigabit-Datentransfer zwischen Twisted-Pair-Ethernet-Kabel und Glasfaserkabel und speist das Ethernet-Kabel mit Gleichstrom für passives PoE. Verwenden Sie ein FiberPoE Gen2-Gerät als Fibre-to-Ethernet-Konverter oder ein Paar FiberPoE Gen2-Geräte, um eine Fibre Bridge zu erstellen.   Verbesserter Überspannungsschutz: Mit einer eingebauten Hochstrom-Gasentladungsröhre (GDT) für die DC-Klemmleiste und den PoE-Port bietet der FiberPoE Gen 2 einen verbesserten Überspannungsschutz. Die zusätzliche GDT-Unterstützung schützt effektiv vor Blitzen und anderen Spannungsstößen.   Glasfaser-Datentransport: Durch den Einsatz von Glasfaserkabeln für den Datentransport werden elektrostatische Entladungen (ESD) und elektromagnetische Interferenzen (EMI) erheblich reduziert. Die Datenintegrität bleibt auch bei Überfahrten von mehr als 100 Metern erhalten, der Ethernet-Grenze über Twisted-Pair-Kabel.   Der FiberPoE Gen 2 unterstützt ein 1G-SFP-Modul und 24 V oder 50 V über ein Gleichstromkabel oder ein PoE-Kabel.