SHOP

Aktive Komponenten Medienkonverter

Unmanaged
Hersteller
LightwinLightwinMikroTikMikroTikPLANETPLANETUbiquitiUbiquiti
Verfügbarkeit
LagerndLagerndim Zulaufim Zulauf
100MBit Ports
11
1GBit Ports, PoE
11
1000Base-SX/LX Port
111000BASE-BX SC1000BASE-BX SC1000BASE-LX SC1000BASE-LX SC22
Distanz
10 km10 km2 km2 km20 km20 km40 km40 km550 m550 m60 km60 km80 km80 km
Max. Distanz
100m (328 ft.)100m (328 ft.)10Base-T : 2-Pair UTP Cat. 3, 4, 5, up to 100 m 100Base-TX : 2-Pair UTP Cat. 5, 5e up to 100 m10Base-T : 2-Pair UTP Cat. 3, 4, 5, up to 100 m 100Base-TX : 2-Pair UTP Cat. 5, 5e up to 100 m
PoE
IEEE 802.3 afIEEE 802.3 af
weitere Filter anzeigen weniger Filter anzeigen
Hersteller, Ubiquiti - F-POE-G2
FiberPoE Gen2, LWL Konverter für Outdoor PoE Geräte
Preis auf Anfrage
  • Glasfaser zu Kupfer Konverter für POE-Geräte im Freien
  • Zuverlässige Langstrecken-Gigabit-PoE Verbindung
  • Verbesserter ESD-Schutz und Reduzierung von elektromagnetischen Interferenzen
  • Zuverlässige 24V/50V-Passiv-PoE-Leitungen
  Fiber + Power-Lösung für PoE-Geräte im Freien: Überwindung der PoE-Einschränkungen mit dem FiberPoE™ der nächsten Generation, Modell F-POE-G2. Der FiberPoE Gen2 ist eine kostengünstige Lösung für Außeneinsätze, bei denen lange Strecken erforderlich sind, um das PoE-Gerät zu erreichen. Implementierungen mit FiberPoE Gen2 bieten einen erheblichen EMI- und ESD-Schutz gegenüber typischen PoE-Installationen. Der FiberPoE Gen2 verfügt außerdem über einen robusten, wetterfesten Formfaktor und einen verbesserten Überspannungsschutz.   Getrennter Daten- und Stromleitungen: PoE ist ideal für Installationen in Innenräumen oder für kurze Wege. Bei Installationen im Außenbereich über große Entfernungen ist PoE jedoch anfällig für elektromagnetische Interferenzen und ist auf 100 Meter bei entsprechendem Leistungsverlust begrenzt. Mit dem FiberPoE Gen2 werden Daten und Strom auf separaten Kabeln transportiert, um die Datenintegrität erheblich zu verbessern und wesentlich längere Kabelwege zu ermöglichen. Der FiberPoE Gen 2 bietet bidirektionalen Gigabit-Datentransfer zwischen Twisted-Pair-Ethernet-Kabel und Glasfaserkabel und speist das Ethernet-Kabel mit Gleichstrom für passives PoE. Verwenden Sie ein FiberPoE Gen2-Gerät als Fibre-to-Ethernet-Konverter oder ein Paar FiberPoE Gen2-Geräte, um eine Fibre Bridge zu erstellen.   Verbesserter Überspannungsschutz: Mit einer eingebauten Hochstrom-Gasentladungsröhre (GDT) für die DC-Klemmleiste und den PoE-Port bietet der FiberPoE Gen 2 einen verbesserten Überspannungsschutz. Die zusätzliche GDT-Unterstützung schützt effektiv vor Blitzen und anderen Spannungsstößen.   Glasfaser-Datentransport: Durch den Einsatz von Glasfaserkabeln für den Datentransport werden elektrostatische Entladungen (ESD) und elektromagnetische Interferenzen (EMI) erheblich reduziert. Die Datenintegrität bleibt auch bei Überfahrten von mehr als 100 Metern erhalten, der Ethernet-Grenze über Twisted-Pair-Kabel.   Der FiberPoE Gen 2 unterstützt ein 1G-SFP-Modul und 24 V oder 50 V über ein Gleichstromkabel oder ein PoE-Kabel.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FST-80x Serie
10/100Base-TX zu 100Base-FX Smart Medienkonverter
Preis auf Anfrage
  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and 100BASE-FX Ethernet standards
  • One 10/100BASE-TX port with RJ45 connector
  • One 100BASE-FX port with ST/SC/WDM connector supporting multi-mode or single-mode fiber optic cable
  • Auto-negotiation and auto-MDI / MDI-X for 10/100BASE-TX port
  • Back-pressure and IEEE 802.3x compliant flow control and full wire-speed forwarding rate
  • Link Loss Return (LLR) switch on each fiber optic is to aid in troubleshooting remote network connections
  • Link Loss Carry Forward (LLCF) works with LLR in diagnosing network connections
  Distance Extended with Fiber Optic Cable PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.    Enhanced Smart Management Features The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.    Easy Installation The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 9
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-1205A
1-Port 10/100TX - 2-Port 100Base-FX(SFP) Switch/Redundant
Preis auf Anfrage
  • Complies with IEEE 802.3, IEEE 802.3u 10 / 100Base-TX and 100Base-FX
  • IEEE 802.3x full-duplex flow-control, back-pressure in Half-duplex eliminate packet loss
  • TS-1000 / OAM function built-in, the device can be remotely monitored with port link status
  • Dual 100Base-FX SFP fiber optic
  • One 10 / 100Base-TX copper
  • Auto-negotiation for 100Base-TX half-duplex or 100Base-T full-duplex
  • Supports auto MDI / MDI-X function
  • Supports maximum frame size up to 2046Kbytes
  • Link status auto-detect and redundant on dual ports with the same connector type
  • Only primary port is active at a time, the backup port is blocked
  • While primary port link fail occurrences, the traffic will swap to backup port automatically
  • Once the primary port status is back to linkup, the traffic will swap from backup port to primary port
  • Hardware redundant swaps less than 10 ms
  PLANET FT-1205A is a 3-port Redundant Media Converter which supports conversion between 10 / 100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter. It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecoms, hospitals, banks and enterprises.   Via the built-in DIP switches, the converter can be configured as 3-port Ethernet switch or 2-port redundant media converter. With the 3-port switch mode, it can operate Store-and-Forward mechanism with high performance, and it can also prevent packet loss via IEEE 802.3x flow control (full-duplex) and back pressure (half-duplex).   With the 2-port redundant mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.   The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The FT-1205A is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. It depends on the 100Base-FX SFP transceiver modules. The Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively.   The converters can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700, MC-1500, MC-1500R and MC-1500R48. As to the other PLANET media converters (FT series), they're hot swappable in MC chassis.
Verfügbarkeit:
lagernd
Login für mehr Info
Nachfolger:
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-801
10/100Base-TX to 100Base-FX (ST) Bridge Media Converter
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-802©
10/100Base-TX to 100Base-FX (SC) Bridge Media Converter
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model    - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm    - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps     - FX: 100Mbps • Duplex mode support:  - Full or half-duplex mode by auto-negotiation (TP)   - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches   - Rear DIP switch: FX duplex mode selection   - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets     PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
lagernd
Login für mehr Info
Varianten: 2
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-802S15
10/100TX-100Base-FX (SC) SM Bridge Fiber Converter 15km
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-802S35
10/100Base to 100Base-FX (SC) SM Bridge Fiber Converter 35km
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-802S50
10/100Base-TX zu 100Base-FX (SC) SM Fiber Converter 50km
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-806A20
10/100Base-TX zu 100Base-FX (WDM) bi-directional Converter
Preis auf Anfrage
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model   - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm   - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate:   - TP: 10/100Mbps      - FX: 100Mbps • Duplex mode support:     - Full or half-duplex mode by auto-negotiation (TP) - Full or half-duplex mode by DIP switch (FX) • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL • DIP switch: 2 DIP switches - Rear DIP switch: FX duplex mode selection - Side DIP switch: LFP (Link Fault Pass-through) mode selection • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets   PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FT-806B20
10/100Base-TX zu 100Base-FX (WDM) bi-directional Converter
Preis auf Anfrage
  • Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
  • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets
  • One fiber-optic, 1310nm wavelength, connector type and distance vary with model
    • FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
    • FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 10/100Mbps
    • FX: 100Mbps
  • Duplex mode support:
    • Full or half-duplex mode by auto-negotiation (TP)
    • Full or half-duplex mode by DIP switch (FX)
  • DIP switch: 2 DIP switches
    • Rear DIP switch: FX duplex mode selection
    • Side DIP switch: LFP (Link Fault Pass-through) mode selection
  PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.    The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.  
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, MikroTik - FTC11XG
Smart 10Gbit SFP+ zu 10Gbit Ethernet Fiber-zu-Kupfer-Konverter, IP55, PoE-In
Preis auf Anfrage
  • Glasfaser-zu-Kupfer Konverter
  • Outdoor Gehäuse
  • 43-57V PoE mit 802.3bt Unterstützung.
  • Lieferumfang: Medien-Konverter, Netzteil, PoE-Injektor

Ein wetterfester IP55 Glasfaser-zu-Kupfer-Konverter zur Umwandlung Ihrer 10 Gigabit SFP+ Glasfaserverbindungen in RJ45 10 Gigabit Ethernet. Er läuft mit einer Vollversion von SwOS Lite und hat einen eigenen Switch-Chip! Ein wetterfester IP55 Fiber-to-Copper Konverter zur Umwandlung Ihrer 10 Gigabit SFP+ Glasfaserverbindungen in RJ45 10 Gigabit Ethernet. Der FTC11XG bietet einen geringen Stromverbrauch (9-10 W) und zwei Möglichkeiten der Stromversorgung: eine Standard-DC-Buchse und 802.3 af/at/bt 43-57 V PoE-In. Im Lieferumfang enthalten sind ein PoE-Injektor, ein Netzteil und alles, was Sie zur Befestigung an der Decke benötigen. Der FTC11XG läuft mit einer Vollversion von SwOS Lite und verfügt über einen eigenen Switch-Chip, mit dem Sie eine Vielzahl von Aufgaben ausführen können, die Sie von einem normalen Medienkonverter nicht erwarten würden! Hier sind einige von ihnen:
  • Schnittstellenmanagement und -überwachung
  • VLAN-Unterstützung
  • SNMP-Berichterstattung
  • Grundlegendes Traffic Shaping
Und sogar erweiterte Paketfilterung mit Access Control List - ein leistungsstarkes Netzwerk-Tool, das Paketfilterung, Accounting und VLAN-Tagging auf der Grundlage der Bedingungen in den Protokoll-Headerfeldern der Schichten 2, 3 und 4 ermöglicht.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FTP-802
IEEE 802.3af PoE 10/100Base-TX to 100Base-FX (SC) Media Converter
Preis auf Anfrage
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards
  • Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port
  • IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss
  • Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
  • Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation
  • 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802
  • 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15
  • DIP-switch: LFP (Link Fault Pass-through) mode selection
  • Compact in size, easy to install
  • LED indicators for easy network diagnostics 
  More than a Fiber Media Converter -- a Power over Ethernet Injector as well The best data link and power sourcing solution for long reach network equipment   PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
    • Media Conversion : 100Base-FX to 10/100Base-TX
    • Power over Ethernet : Power Sourcing Equipment (PSE), PoE Injector
Providing both PoE and fiber-optic interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.   PoE Optimizes the Installation and Power Management of Network Devices The IEEE 802.3af capabilities of the FTP-80x reduce installation costs for many new network productivity devices. As an IEEE 802.3af Power over Ethernet Injector, the FTP-80x provides DC 48V voltage over Ethernet cables. It allows the twisted pair cable between the FTP-80x and IEEE 802.3af compliant PD (Powered Device) or PoE Splitter (such as POE-151S-5V / 12V) to transfer data and power simultaneously.   Fiber-optic Link Capability Extends the Range of Network Deployments The maximum distance from the PoE PSE and PD is 100 meters. To extend the deployment range of network device, the FTP-80x is integrated with fiber interface. The FTP-80x PoE Media Converters are used to convert optical Ethernet signal to electrical Ethernet signal that allows two type of segments to connect easily, efficiently and inexpensively. It can convert 10/100Base-TX signal to 100Base-FX signal and provides the diverse fiber connecting types of options to meet different network applications. By selecting models, the maximum networking distance can extend to as long as 15 kilometers and still sustain the transmission performance as high as 100Mbps. It works in high performance of Store and Forward mechanism and if also can prevent packet loss with IEEE 802.3x flow control (full-duplex). With the LFP (Link Fault Pass-through function),(LLCF / LLR) and the DIP switch design, it can immediately alarm administrators problems of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function.   Advantage of Combined PoE and Media Conversion With the data, long reach fiber capability and PoE from one unit, the FTP-80x will reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the security IP camera and wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - FTP-802S15
IEEE 802.3af PoE 10/100TX - 100Base-FX (SC) Single Mode Fiber Converter - 15KM
Preis auf Anfrage
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards
  • Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port
  • IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss
  • Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
  • Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation
  • 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802
  • 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15
  • DIP-switch: LFP (Link Fault Pass-through) mode selection
  • Compact in size, easy to install
  • LED indicators for easy network diagnostics
  More than a Fiber Media Converter -- a Power over Ethernet Injector as well The best data link and power sourcing solution for long reach network equipment   PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
  • Media Conversion : 100Base-FX to 10/100Base-TX
  • Power over Ethernet : Power Sourcing Equipment (PSE), PoE Injector
Providing both PoE and fiber-optic interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.   PoE Optimizes the Installation and Power Management of Network Devices The IEEE 802.3af capabilities of the FTP-80x reduce installation costs for many new network productivity devices. As an IEEE 802.3af Power over Ethernet Injector, the FTP-80x provides DC 48V voltage over Ethernet cables. It allows the twisted pair cable between the FTP-80x and IEEE 802.3af compliant PD (Powered Device) or PoE Splitter (such as POE-151S-5V / 12V) to transfer data and power simultaneously.   Fiber-optic Link Capability Extends the Range of Network Deployments The maximum distance from the PoE PSE and PD is 100 meters. To extend the deployment range of network device, the FTP-80x is integrated with fiber interface. The FTP-80x PoE Media Converters are used to convert optical Ethernet signal to electrical Ethernet signal that allows two type of segments to connect easily, efficiently and inexpensively. It can convert 10/100Base-TX signal to 100Base-FX signal and provides the diverse fiber connecting types of options to meet different network applications. By selecting models, the maximum networking distance can extend to as long as 15 kilometers and still sustain the transmission performance as high as 100Mbps. It works in high performance of Store and Forward mechanism and if also can prevent packet loss with IEEE 802.3x flow control (full-duplex). With the LFP (Link Fault Pass-through function),(LLCF / LLR) and the DIP switch design, it can immediately alarm administrators problems of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function.   Advantage of Combined PoE and Media Conversion With the data, long reach fiber capability and PoE from one unit, the FTP-80x will reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the security IP camera and wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-1205A
1Port 10/100/1000Base-T to 2Port Gigabit SFP Media Converter
Preis auf Anfrage
Standard
  • Complies with IEEE 802.3 10Base-T
  • Complies with IEEE 802.3u 100Base-TX
  • Complies with IEEE 802.3ab 1000Base-T
  • Complies with IEEE 802.3z 1000Base-SX / LX
  • IEEE 802.3x Full-duplex Flow-Control, Back-Pressure in Half-duplex eliminate packets loss
  Interface
  • Dual 1000Base-SX / LX SFP Fiber-Optic Slots
  • One 10/100/1000Base-T Copper, auto MDI/MDIX function
  • Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, Full-duplex for 1000Mbps
  • Supports maximum frame size up to 1522 bytes
  • IEEE 802.1Q Tag VLAN Transparent, Multicast pass-through
  Redundancy
  • Link status auto-detecting and redundant on Dual ports with the same connector type
  • Allows only the Primary-Port or the Backup-Port active at a time
- When the Primary-Port link fail occurs, the traffic swaps to Backup-Port automatically - Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port
  • Hardware fiber port redundant
  Mechanical
  • External 5V / 2A DC power supply
  • LED indicators for easy network diagnose
  • DIP switch for 3-port operation with Gigabit switch mode or redundant mode
  • Compact in size, easy installation
  • Co-works with PLANET 10”/19” Media Converter Chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
  • Wall mounting and DIN-Rail installation supported
  PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit SFP slots, strengthened redundant function, and other features shown below:
    • DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode
    • Hardware Fiber Port Redundant
  Highly Convenient and Distance Extendable The GT-1205A is equipped with one 10/100/1000Base-T port and dual Gigabit SFP slots to support conversion between 10/100/1000Base-T and 1000Base-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m, 10km or longer, depending on the optional 1000Base-SX / LX SFP transceiver modules.      Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port Redundant Media converter. With the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.    Easy Deployment Standalone or with Chassis The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function.   Plug & Play Installation As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-802
10/100/1000Base-T to 1000Base-SX Gigabit Converter
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature  –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets  –Supports auto MDI/MDI-X function  –Store-and-Forward mechanism  –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows:  –Multi-mode fiber using SC/LC/WDM connector;  –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base  SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-802S
10/100/1000Base-T to 1000Base-LX Gigabit Converter
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. • Layer 2 key Feature  –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets  –Supports auto MDI/MDI-X function  –Store-and-Forward mechanism  –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows:  –Multi-mode fiber using SC/LC/WDM connector;  –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base  SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-802S40
10/100/1000BASE-T to 1000BASE-LX Media Converter (SC, SM), 40km
Preis auf Anfrage
  • 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
  • Layer 2 key features
    • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
    • Supports auto MDI/MDI-X function 
    • Store-and-Forward mechanism
    • Non-blocking full wire-speed forwarding rate 
  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
  • Fiber media allows
    • Multi-mode fiber using SC/LC/WDM connector
    • Single-mode fiber using SC/LC/WDM connector
  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Wall-mountable design
  • LED indicators for easy network diagnostics
  • Provides DIP switch for LFP function (Disable/Enable) setting
  • 9K jumbo frame supported
  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
  • Compact in size, easy installation

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-802S60
10/100/1000BASE-T to 1000BASE-LX Media Converter (SC, SM), 60km
Preis auf Anfrage
  • 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
  • Layer 2 key features
    • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
    • Supports auto MDI/MDI-X function 
    • Store-and-Forward mechanism
    • Non-blocking full wire-speed forwarding rate 
  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
  • Fiber media allows
    • Multi-mode fiber using SC/LC/WDM connector
    • Single-mode fiber using SC/LC/WDM connector
  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Wall-mountable design
  • LED indicators for easy network diagnostics
  • Provides DIP switch for LFP function (Disable/Enable) setting
  • 9K jumbo frame supported
  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
  • Compact in size, easy installation

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-805A
10/100/1000Base-T to miniGBIC (SFP) Converter
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806A15
10/100/1000Base-T to WDM Bi-directional Fiber Converter 15km
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate   • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector   • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806A40
10/100/1000BASE-T to 1000BASE-LX (WDM) Media Converter TX:1310nm, 40km
Preis auf Anfrage
  • 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
  • Layer 2 key features
    • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
    • Supports auto MDI/MDI-X function 
    • Store-and-Forward mechanism
    • Non-blocking full wire-speed forwarding rate 
  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
  • Fiber media allows
    • Multi-mode fiber using SC/LC/WDM connector
    • Single-mode fiber using SC/LC/WDM connector
  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Wall-mountable design
  • LED indicators for easy network diagnostics
  • Provides DIP switch for LFP function (Disable/Enable) setting
  • 9K jumbo frame supported
  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
  • Compact in size, easy installation

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806A60
10/100/1000Base-T to WDM Bi-directional Fiber Converter 60km
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806B15
10/100/1000Base-T to WDM Bi-directional Fiber Converter 15km
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806B40
10/100/1000BASE-T to 1000BASE-LX (WDM) Media Converter TX:1550nm, 40km
Preis auf Anfrage
  • 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km
  • Layer 2 key features
    • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets 
    • Supports auto MDI/MDI-X function 
    • Store-and-Forward mechanism
    • Non-blocking full wire-speed forwarding rate 
  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX. 
  • Fiber media allows
    • Multi-mode fiber using SC/LC/WDM connector
    • Single-mode fiber using SC/LC/WDM connector
  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Wall-mountable design
  • LED indicators for easy network diagnostics
  • Provides DIP switch for LFP function (Disable/Enable) setting
  • 9K jumbo frame supported
  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
  • Compact in size, easy installation

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GT-806B60
10/100/1000Base-T to WDM Bi-directional Fiber Converter 60km
Preis auf Anfrage
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. • TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. • 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802). • 1000Base-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S). • 1000Base-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15. • 1000Base-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60. • 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.   Layer 2 key Feature –IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets –Supports auto MDI/MDI-X function –Store-and-Forward mechanism –Non-blocking full wire-speed forwarding rate • Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. • Fiber media allows: –Multi-mode fiber using SC/LC/WDM connector; –Single-mode fiber using SC/LC/WDM connector • Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48) • Wall-mountable design • LED indicators for easy network diagnostics • Provides DIP switch for LFP function (Disable / Enable) setting • OAM TS-1000 supported • 9K Jumbo Frame Supported • Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base    SFP interface • Compact in size, easy installation   Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.   Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.   Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.   Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Aktive Komponenten, PLANET - GT-915A
Web/SNMP Manageable 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter
Preis auf Anfrage
  • 1x 1G/100/10BASE-T RJ45 interface with auto MDI/MDI-X function
  • 1x 1G/100BASE-X SFP interface
Layer 2 Features:
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 
    • VLAN transparent
  • Storm Control support
    • Broadcast/Multicast/DLF (Destination Lookup Failure)/ARP/ICMP
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate
  • 16K jumbo frame size support 
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Automatic address learning and address aging
  • Supports port status/Ethernet statistics on both TP and fiber interfaces
  • Supports Link Fault Passthrough (LFP) and Link Layer Discovery Protocol (LLDP)  
OAM Compliant:
  • TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test 
Quality of Service:
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all converter ports
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic classification
    • IEEE 802.1p CoS
    • IP DSCP
    • IP Address 
Management:
  • IPv4 and IPv6 dual stack management
  • Management Interfaces
    • Web HTTP management
    • Telnet Command Line Interface 
    • SNMP v1, v2c monitoring
    • SSHv2, TLSv1.2 and SNMP v3 secure access
  • System Maintenance
    • Firmware upload/download via HTTP
    • Reset button for system reboot or reset to factory default
  • Network Time Protocol (NTP)
  • SNMP Management
    • SNMP trap for interface link up and link down notification
    • Four RMON groups (history, statistics, alarms and events)
  • Network Diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
  • Syslog remote alarm
    • Local system Log
  • PLANET Smart Discovery Utility for deploy management
  • PLANET Remote Management
    • PLANET NMS Controller and CloudViewer for deployment management 
Case and Installation:
  • External 5V DC, 2A power supply
  • 0 to 50 degrees C operating temperature 
  • Supports 6000 VDC Ethernet ESD protection
  • Wall mounting and DIN-rail installation supported
  • Works with PLANET’s 10”/19” Media Converter Chassis
    • (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Plug and Play installation

Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GTP-805A
IEEE 802.3af/at PoE 10/100/1000Base-T to MiniGBIC (SFP) Converter
Preis auf Anfrage
Interface • 1-Port RJ45 interface  - 1-Port Data + Power output • 1-Port Fiber Optic  - GTP-802: SC Fiber Interface  - GTP-802S: SC Fiber Interface  - GTP-805A: LC Fiber Interface • DC 52V power input socket   PoE • Complies with IEEE 802.3af standard and IEEE 802.3at standard, Mid-Span PSE • Provides DC 52V power over RJ45 Ethernet cable to devices with Ethernet port • Supports PoE Power up to 30 watts for PoE port • Auto detects of IEEE 802.3at / IEEE 802.3af PoE equipment protecting the devices from being  damaged by incorrect installation • Remote power feeding up to 100m • IEEE 802.3at / IEEE 802.3af splitter devices compatiblility   Hardware • Metal Case • LED indicators  - Power LED  - PoE In-use  - Fiber LNK / ACT  - TP LNK / ACT • DIP-switch: LFP (Link Fault Pass-through) Mode selection • 9K Maximum Frame Size Supported   Standard Compliance • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000BASE-X • IEEE 802.3af Power over Ethernet Standard • IEEE 802.3at Power over Ethernet enhancements Standard • FCC Part 15 Class A, CE   The Best Data Link and Power Sourcing Solution As more and more PoE PD devices need higher power input and long-distance transmission, PLANET has released a new Power over Ethernet Media Converter, GTP-80x series. With the brand-new IEEE 802.3at High Power over Ethernet technology applied, the GTP-80x series provides the following key features:
    • IEEE 802.3at / IEEE 802.3af PoE standard compliance
    • Supports a maximum of 30 watts output power
    • 10/100/1000Mbps duplex mode supports on 1000BASE-T port
    • 1000Mbps Fiber-Optic support
  The GTP-80x series is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet converter designed specifically to satisfy the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The GTP-80x High Power over Ethernet converter series is an ideal solution to delivering data and power to network devices directly via the RJ45 Port interface without the need for installing extra power outlets and electrical cabling.    Fiber-Optic Link Capability Extends the Range of Network Deployment The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the GTP-80x is integrated with Fiber interface. The GTP-80x PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively. It can convert 10/100/1000BASE-T signal to 1000BASE-X one and provide the diverse options of fiber connecting types to meet different network applications. The GTP-80x series and its fiber connecting type includes:
    • GTP-802:SC Fiber Interface with Multi-mode, Distance up to 220m and 550m
    • GTP-802S:SC Fiber Interface with Single-mode, Distance up to 10km
    • GTP-805A:LC Fiber Interface, supports Multi / Single Mode SFP module, Distance up to 120km max. (Varting on SFP module)
With the long Fiber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in high performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass through function) (LLCF/LLR) with the DIP Switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitoring the network power usage.   Quick and Easy High Power PoE Network Deployment The GTP-80x series provides 52V DC power over Ethernet cables -- just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE splitters (POE-151S / POE-152S / POE-162S) to transfer data and power simultaneously for up to 100 meters. Then it will spilt the digital data and the power into two kinds of selectable DC outputs (5V DC / 12V DC) or (12V DC / 24V DC).Thus, it reduces cables and the dedicated electrical outlets on the wall, ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera and wireless AP deployment from restrictions of power outlet locations.
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GUP-805A-60W
100/1000BASE-X SFP zu 10/100/1000BASE-T 802.3bt PoE++ Medien Konverter, 60 Watt
Preis auf Anfrage
  • Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX
  • Copper RJ45 interface with Data + Power output
  • Copper port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X.
  • Fiber media allows
    • Multi-mode fiber using LC connector
    • Single-mode fiber using LC connector

Power over Ethernet:
  • Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
  • Backward Compatible with IEEE 802.3at Power over Ethernet plus end-span/mid-span PSE
  • Provides DC 52V~55V power over RJ45 Ethernet cable to devices with Ethernet port
  • RJ45 PoE++ port with built-in 802.3bt type-4 PoE 95W injector function
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • IEEE 802.3bt/IEEE 802.3at splitter devices compatibility
Layer 2 Features:
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate
  • IEEE 802.1Q Tag VLAN transparent, multicast pass through
  • 9K jumbo frame 
  • IEEE 802.3x full-duplex and half-duplex back-pressure flow control to eliminate the loss of packets 
Mechanical:
  • Metal case
  • LED indicators for easy network diagnostics
  • DIP switch for PoE power feeding options (BT/UPOE/Legacy) selection
  • DC 52V~55V power input socket
  • Wall mounting or DIN-rail installation (optional)
  • Compact in size, easy installation

Application:
Flexible and User-friendly PoE Deployment with Gigabit SFP Fiber Extension:
For the places difficult to find the power outlet, the GUP-805A-60W provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network devices that need higher power to function normally. For instance, users can flexibly install security IP camera, wireless access point and other IEEE 802.3bt/at/af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs. Gigabit 802.3bt PoE++ and PoE+ Network Deployment Solution:
PLANET GUP-805A-60W can easily build an 802.3BT PoE++ networking solution for the enterprises. For instance, they can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GUP-805A-60W and 802.3bt PoE++ Splitter-POE-173S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. Receiving data and power from the GUP-805A-60W, the POE-173S separates digital data and power into three optional outputs (12V, 19V or 24V DC) to non-PoE devices such as laptops, Thin Client, POS System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, PLANET - GUP-805A-95W
100/1000BASE-X SFP zu 10/100/1000BASE-T 802.3bt PoE++ Medien Konverter, 95 Watt
Preis auf Anfrage
  • Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX
  • Copper RJ45 interface with Data + Power output
  • Copper port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X.
  • Fiber media allows
    • Multi-mode fiber using LC connector
    • Single-mode fiber using LC connector

Power over Ethernet:
  • Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
  • Backward Compatible with IEEE 802.3at Power over Ethernet plus end-span/mid-span PSE
  • Provides DC 52V~55V power over RJ45 Ethernet cable to devices with Ethernet port
  • RJ45 PoE++ port with built-in 802.3bt type-4 PoE 95W injector function
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • IEEE 802.3bt/IEEE 802.3at splitter devices compatibility
Layer 2 Features:
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate
  • IEEE 802.1Q Tag VLAN transparent, multicast pass through
  • 9K jumbo frame 
  • IEEE 802.3x full-duplex and half-duplex back-pressure flow control to eliminate the loss of packets 
Mechanical:
  • Metal case
  • LED indicators for easy network diagnostics
  • DIP switch for PoE power feeding options (BT/UPOE/Legacy) selection
  • DC 52V~55V power input socket
  • Wall mounting or DIN-rail installation (optional)
  • Compact in size, easy installation

Application:
Flexible and User-friendly PoE Deployment with Gigabit SFP Fiber Extension:
For the places difficult to find the power outlet, the GUP-805A-95W provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network devices that need higher power to function normally. For instance, users can flexibly install security IP camera, wireless access point and other IEEE 802.3bt/at/af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs. Gigabit 802.3bt PoE++ and PoE+ Network Deployment Solution:
PLANET GUP-805A-95W can easily build an 802.3BT PoE++ networking solution for the enterprises. For instance, they can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GUP-805A-95W and 802.3bt PoE++ Splitter-POE-173S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. Receiving data and power from the GUP-805A-95W, the POE-173S separates digital data and power into three optional outputs (12V, 19V or 24V DC) to non-PoE devices such as laptops, Thin Client, POS System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. 
Verfügbarkeit:
nicht lagernd
Login für mehr Info
mehr Informationen
zu Favoriten
Hersteller, Lightwin - LWC 10/100 MM SC
Fast Ethernet Medienkonverter 100Base-FX Multimode, SC, 550m
Preis auf Anfrage
  • Lightwin Fast Ethernet Multimode Konverter
  • Spezielle Lichtquelle mit langer Lebensdauer
  • Externes Netzteil im Lieferumfang
  • Kompatibel mit Lightwin Chassis
  • Übertragung: Multimode
  • Datenrate: 100Mb/s
  • Wellenlänge: 1310nm
  • Distanz: 550m
  • Anschlüsse: 1x Duplex SC, 1x RJ45
  • Modus: Dual Fiber

Lightwin High Quality Multimode Medienkonverter mit wichtigen Vorteilen im Vergleich zu alternativen no name Konvertern. Alle Lightwin Konverter unterstützen 10/100Base-T auto-negotation und auto-MDI/MDI-X.   Lightwin Konverter überzeugen mit der speziell ausgewählten Lichtquelle durch deutlich längere Lebensdauer. Alle Lightwin Konverter werden mit einem externen Netzteil ausgeliefert und können mit dem optionalen Lightwin Chassis verwendet werden.  
Verfügbarkeit:
lagernd
Login für mehr Info
mehr Informationen
zu Favoriten